| Message ID | 20220517155730.327564-1-zlang@kernel.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/2] generic: soft quota limits testing within grace time | expand |
On Tue, May 17, 2022 at 11:57:30PM +0800, Zorro Lang wrote: > After soft limits are exceeded, within the grace time, fs quota > should allow more space allocation before exceeding hard limits, > even if allocating many small files. > > This case can cover bc37e4fb5cac (xfs: revert "xfs: actually bump > warning counts when we send warnings"). And will help to expose > later behavior changes on this side. > > Signed-off-by: Zorro Lang <zlang@redhat.com> Looks good now, Reviewed-by: Darrick J. Wong <djwong@kernel.org> --D > --- > > Hi, > > As the [PATCH 2/2] has been reviewed, so only send the 1st patch. > V4 did below changes according to [1]: > 1) Add new local function filter_quota. > 2) Don't filter out quota error output. > > Thanks, > Zorro > > [1] > https://lore.kernel.org/fstests/20220512190647.GC27174@magnolia/ > > common/quota | 48 +++++++++++++++++++ > tests/generic/999 | 107 ++++++++++++++++++++++++++++++++++++++++++ > tests/generic/999.out | 34 ++++++++++++++ > 3 files changed, 189 insertions(+) > create mode 100755 tests/generic/999 > create mode 100644 tests/generic/999.out > > diff --git a/common/quota b/common/quota > index 7fa1a61a..67698f74 100644 > --- a/common/quota > +++ b/common/quota > @@ -351,5 +351,53 @@ _qsetup() > echo "Using type=$type id=$id" >> $seqres.full > } > > +# Help to create project quota on directory, works for xfs and other fs. > +# Usage: _create_project_quota <dirname> <projid> [name] > +# Although the [name] is optional, better to specify it if need a fixed name. > +_create_project_quota() > +{ > + local prjdir=$1 > + local id=$2 > + local name=$3 > + > + if [ -z "$name" ];then > + name=`echo $projdir | tr \/ \_` > + fi > + > + rm -rf $prjdir > + mkdir $prjdir > + chmod ugo+rwx $prjdir > + > + if [ -f /etc/projects -a ! -f $tmp.projects.bk ];then > + cat /etc/projects > $tmp.projects.bk > + echo >/etc/projects > + fi > + if [ -f /etc/projid -a ! -f $tmp.projid.bk ];then > + cat /etc/projid > $tmp.projid.bk > + echo >/etc/projid > + fi > + > + cat >>/etc/projects <<EOF > +$id:$prjdir > +EOF > + cat >>/etc/projid <<EOF > +$name:$id > +EOF > + $XFS_IO_PROG -r -c "chproj $id" -c "chattr +P" $prjdir > +} > + > +# If you've called _create_project_quota, then use this function in _cleanup > +_restore_project_quota() > +{ > + if [ -f $tmp.projects.bk ];then > + cat $tmp.projects.bk > /etc/projects && \ > + rm -f $tmp.projects.bk > + fi > + if [ -f $tmp.projid.bk ];then > + cat $tmp.projid.bk > /etc/projid && \ > + rm -f $tmp.projid.bk > + fi > +} > + > # make sure this script returns success > /bin/true > diff --git a/tests/generic/999 b/tests/generic/999 > new file mode 100755 > index 00000000..690a289f > --- /dev/null > +++ b/tests/generic/999 > @@ -0,0 +1,107 @@ > +#! /bin/bash > +# SPDX-License-Identifier: GPL-2.0 > +# Copyright (c) 2022 Red Hat Inc. All Rights Reserved. > +# > +# FS QA Test No. 999 > +# > +# Make sure filesystem quota works well, after soft limits are exceeded. The > +# fs quota should allow more space allocation before exceeding hard limits > +# and with in grace time. > +# > +# But different with other similar testing, this case tries to write many small > +# files, to cover bc37e4fb5cac (xfs: revert "xfs: actually bump warning counts > +# when we send warnings"). If there's a behavior change some day, this case > +# might help to detect that too. > +# > +. ./common/preamble > +_begin_fstest auto quota > + > +# Override the default cleanup function. > +_cleanup() > +{ > + _restore_project_quota > + cd / > + rm -r -f $tmp.* > +} > + > +# Import common functions. > +. ./common/quota > + > +# real QA test starts here > +_supported_fs generic > +_require_scratch > +_require_quota > +_require_user > +_require_group > + > +# Make sure the kernel supports project quota > +_scratch_mkfs >$seqres.full 2>&1 > +_scratch_enable_pquota > +_qmount_option "prjquota" > +_qmount > +_require_prjquota $SCRATCH_DEV > + > +filter_quota() > +{ > + # Different filesystems might returns EDQUOT or ENOSPC if project > + # quota is exceeded > + if [ "$1" = "P" ];then > + sed -e "s/.*: \(.*\)/Error: \1/g" \ > + -e "s,Disk quota exceeded,EDQUOT|ENOSPC,g" \ > + -e "s,No space left on device,EDQUOT|ENOSPC,g" > + else > + sed -e "s/.*: \(.*\)/Error: \1/g" > + fi > +} > + > +exercise() > +{ > + local type=$1 > + local file=$SCRATCH_MNT/testfile > + > + echo "= Test type=$type quota =" >>$seqres.full > + _scratch_unmount > + _scratch_mkfs >>$seqres.full 2>&1 > + if [ "$type" = "P" ];then > + _scratch_enable_pquota > + fi > + _qmount > + if [ "$type" = "P" ];then > + _create_project_quota $SCRATCH_MNT/t 100 $qa_user > + file=$SCRATCH_MNT/t/testfile > + fi > + > + setquota -${type} $qa_user 1M 200M 0 0 $SCRATCH_MNT > + setquota -${type} -t 86400 86400 $SCRATCH_MNT > + repquota -v -${type} $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + # Exceed the soft quota limit a bit at first > + su $qa_user -c "$XFS_IO_PROG -f -t -c 'pwrite 0 2m' -c fsync ${file}.0" >>$seqres.full > + # Write more data more times under soft quota limit exhausted condition, > + # but not reach hard limit. To make sure each write won't trigger EDQUOT. > + for ((i=1; i<=100; i++));do > + su "$qa_user" -c "$XFS_IO_PROG -f -c 'pwrite 0 1m' -c fsync ${file}.$i" >>$seqres.full > + if [ $? -ne 0 ];then > + echo "Unexpected error (type=$type)!" > + break > + fi > + done > + repquota -v -${type} $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 > + > + # As we've tested soft limit, now exceed the hard limit and give it a > + # test in passing. > + su $qa_user -c "$XFS_IO_PROG -f -t -c 'pwrite 0 100m' -c fsync ${file}.hard.0" 2>&1 >/dev/null | filter_quota $type > + for ((i=1; i<=10; i++));do > + su "$qa_user" -c "$XFS_IO_PROG -f -c 'pwrite 0 1m' -c fsync ${file}.hard.$i" 2>&1 | filter_quota $type > + done > +} > + > +_qmount_option "usrquota" > +exercise u > +_qmount_option "grpquota" > +exercise g > +_qmount_option "prjquota" > +exercise P > + > +# success, all done > +status=0 > +exit > diff --git a/tests/generic/999.out b/tests/generic/999.out > new file mode 100644 > index 00000000..e50942f7 > --- /dev/null > +++ b/tests/generic/999.out > @@ -0,0 +1,34 @@ > +QA output created by 999 > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: Disk quota exceeded > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > +Error: EDQUOT|ENOSPC > -- > 2.31.1 >
diff --git a/common/quota b/common/quota index 7fa1a61a..67698f74 100644 --- a/common/quota +++ b/common/quota @@ -351,5 +351,53 @@ _qsetup() echo "Using type=$type id=$id" >> $seqres.full } +# Help to create project quota on directory, works for xfs and other fs. +# Usage: _create_project_quota <dirname> <projid> [name] +# Although the [name] is optional, better to specify it if need a fixed name. +_create_project_quota() +{ + local prjdir=$1 + local id=$2 + local name=$3 + + if [ -z "$name" ];then + name=`echo $projdir | tr \/ \_` + fi + + rm -rf $prjdir + mkdir $prjdir + chmod ugo+rwx $prjdir + + if [ -f /etc/projects -a ! -f $tmp.projects.bk ];then + cat /etc/projects > $tmp.projects.bk + echo >/etc/projects + fi + if [ -f /etc/projid -a ! -f $tmp.projid.bk ];then + cat /etc/projid > $tmp.projid.bk + echo >/etc/projid + fi + + cat >>/etc/projects <<EOF +$id:$prjdir +EOF + cat >>/etc/projid <<EOF +$name:$id +EOF + $XFS_IO_PROG -r -c "chproj $id" -c "chattr +P" $prjdir +} + +# If you've called _create_project_quota, then use this function in _cleanup +_restore_project_quota() +{ + if [ -f $tmp.projects.bk ];then + cat $tmp.projects.bk > /etc/projects && \ + rm -f $tmp.projects.bk + fi + if [ -f $tmp.projid.bk ];then + cat $tmp.projid.bk > /etc/projid && \ + rm -f $tmp.projid.bk + fi +} + # make sure this script returns success /bin/true diff --git a/tests/generic/999 b/tests/generic/999 new file mode 100755 index 00000000..690a289f --- /dev/null +++ b/tests/generic/999 @@ -0,0 +1,107 @@ +#! /bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2022 Red Hat Inc. All Rights Reserved. +# +# FS QA Test No. 999 +# +# Make sure filesystem quota works well, after soft limits are exceeded. The +# fs quota should allow more space allocation before exceeding hard limits +# and with in grace time. +# +# But different with other similar testing, this case tries to write many small +# files, to cover bc37e4fb5cac (xfs: revert "xfs: actually bump warning counts +# when we send warnings"). If there's a behavior change some day, this case +# might help to detect that too. +# +. ./common/preamble +_begin_fstest auto quota + +# Override the default cleanup function. +_cleanup() +{ + _restore_project_quota + cd / + rm -r -f $tmp.* +} + +# Import common functions. +. ./common/quota + +# real QA test starts here +_supported_fs generic +_require_scratch +_require_quota +_require_user +_require_group + +# Make sure the kernel supports project quota +_scratch_mkfs >$seqres.full 2>&1 +_scratch_enable_pquota +_qmount_option "prjquota" +_qmount +_require_prjquota $SCRATCH_DEV + +filter_quota() +{ + # Different filesystems might returns EDQUOT or ENOSPC if project + # quota is exceeded + if [ "$1" = "P" ];then + sed -e "s/.*: \(.*\)/Error: \1/g" \ + -e "s,Disk quota exceeded,EDQUOT|ENOSPC,g" \ + -e "s,No space left on device,EDQUOT|ENOSPC,g" + else + sed -e "s/.*: \(.*\)/Error: \1/g" + fi +} + +exercise() +{ + local type=$1 + local file=$SCRATCH_MNT/testfile + + echo "= Test type=$type quota =" >>$seqres.full + _scratch_unmount + _scratch_mkfs >>$seqres.full 2>&1 + if [ "$type" = "P" ];then + _scratch_enable_pquota + fi + _qmount + if [ "$type" = "P" ];then + _create_project_quota $SCRATCH_MNT/t 100 $qa_user + file=$SCRATCH_MNT/t/testfile + fi + + setquota -${type} $qa_user 1M 200M 0 0 $SCRATCH_MNT + setquota -${type} -t 86400 86400 $SCRATCH_MNT + repquota -v -${type} $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + # Exceed the soft quota limit a bit at first + su $qa_user -c "$XFS_IO_PROG -f -t -c 'pwrite 0 2m' -c fsync ${file}.0" >>$seqres.full + # Write more data more times under soft quota limit exhausted condition, + # but not reach hard limit. To make sure each write won't trigger EDQUOT. + for ((i=1; i<=100; i++));do + su "$qa_user" -c "$XFS_IO_PROG -f -c 'pwrite 0 1m' -c fsync ${file}.$i" >>$seqres.full + if [ $? -ne 0 ];then + echo "Unexpected error (type=$type)!" + break + fi + done + repquota -v -${type} $SCRATCH_MNT | grep -v "^root" >>$seqres.full 2>&1 + + # As we've tested soft limit, now exceed the hard limit and give it a + # test in passing. + su $qa_user -c "$XFS_IO_PROG -f -t -c 'pwrite 0 100m' -c fsync ${file}.hard.0" 2>&1 >/dev/null | filter_quota $type + for ((i=1; i<=10; i++));do + su "$qa_user" -c "$XFS_IO_PROG -f -c 'pwrite 0 1m' -c fsync ${file}.hard.$i" 2>&1 | filter_quota $type + done +} + +_qmount_option "usrquota" +exercise u +_qmount_option "grpquota" +exercise g +_qmount_option "prjquota" +exercise P + +# success, all done +status=0 +exit diff --git a/tests/generic/999.out b/tests/generic/999.out new file mode 100644 index 00000000..e50942f7 --- /dev/null +++ b/tests/generic/999.out @@ -0,0 +1,34 @@ +QA output created by 999 +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: Disk quota exceeded +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC +Error: EDQUOT|ENOSPC
After soft limits are exceeded, within the grace time, fs quota should allow more space allocation before exceeding hard limits, even if allocating many small files. This case can cover bc37e4fb5cac (xfs: revert "xfs: actually bump warning counts when we send warnings"). And will help to expose later behavior changes on this side. Signed-off-by: Zorro Lang <zlang@redhat.com> --- Hi, As the [PATCH 2/2] has been reviewed, so only send the 1st patch. V4 did below changes according to [1]: 1) Add new local function filter_quota. 2) Don't filter out quota error output. Thanks, Zorro [1] https://lore.kernel.org/fstests/20220512190647.GC27174@magnolia/ common/quota | 48 +++++++++++++++++++ tests/generic/999 | 107 ++++++++++++++++++++++++++++++++++++++++++ tests/generic/999.out | 34 ++++++++++++++ 3 files changed, 189 insertions(+) create mode 100755 tests/generic/999 create mode 100644 tests/generic/999.out