| Message ID | 20220518205924.399291-13-benjamin.tissoires@redhat.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce eBPF support for HID devices | expand |
On Thu, May 19, 2022 at 02:29:19AM IST, Benjamin Tissoires wrote: > Add tests for the newly implemented function. > We test here only the GET_REPORT part because the other calls are pure > HID protocol and won't infer the result of the test of the bpf hook. > > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > > --- > > changes in v5: > - use the new hid_bpf_allocate_context() API > - remove the need for ctx_in for syscall TEST_RUN > > changes in v3: > - use the new hid_get_data API > - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi > > changes in v2: > - split the series by bpf/libbpf/hid/selftests and samples > --- > tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- > tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ > 2 files changed, 155 insertions(+), 18 deletions(-) > > diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c > index 47bc0a30c275..54c0a0fcd54d 100644 > --- a/tools/testing/selftests/bpf/prog_tests/hid.c > +++ b/tools/testing/selftests/bpf/prog_tests/hid.c > @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { > 0xc0, /* END_COLLECTION */ > }; > > +static u8 feature_data[] = { 1, 2 }; > + > struct attach_prog_args { > int prog_fd; > unsigned int hid; > int retval; > }; > > +struct hid_hw_request_syscall_args { > + __u8 data[10]; > + unsigned int hid; > + int retval; > + size_t size; > + enum hid_report_type type; > + __u8 request_type; > +}; > + > static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; > static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; > > @@ -142,7 +153,7 @@ static void destroy(int fd) > > static int uhid_event(int fd) > { > - struct uhid_event ev; > + struct uhid_event ev, answer; > ssize_t ret; > > memset(&ev, 0, sizeof(ev)); > @@ -183,6 +194,15 @@ static int uhid_event(int fd) > break; > case UHID_GET_REPORT: > fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); > + > + answer.type = UHID_GET_REPORT_REPLY; > + answer.u.get_report_reply.id = ev.u.get_report.id; > + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; > + answer.u.get_report_reply.size = sizeof(feature_data); > + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); > + > + uhid_write(fd, &answer); > + > break; > case UHID_SET_REPORT: > fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); > @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) > struct test_params { > struct hid *skel; > int hidraw_fd; > + int hid_id; > }; > > static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) > @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) > goto cleanup; > > - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > - goto cleanup; > + if (prog_name) { > + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > + goto cleanup; > > - bpf_program__set_autoload(prog, true); > + bpf_program__set_autoload(prog, true); > > - err = hid__load(hid_skel); > - if (!ASSERT_OK(err, "hid_skel_load")) > - goto cleanup; > + err = hid__load(hid_skel); > + if (!ASSERT_OK(err, "hid_skel_load")) > + goto cleanup; > > - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > - err = attach_fd; > - goto cleanup; > - } > + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > + err = attach_fd; > + goto cleanup; > + } > > - args.prog_fd = bpf_program__fd(prog); > - err = bpf_prog_test_run_opts(attach_fd, &tattr); > - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > - if (!ASSERT_EQ(args.retval, 0, buf)) > - goto cleanup; > + args.prog_fd = bpf_program__fd(prog); > + err = bpf_prog_test_run_opts(attach_fd, &tattr); > + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > + if (!ASSERT_EQ(args.retval, 0, buf)) > + goto cleanup; > + } else { > + err = hid__load(hid_skel); > + if (!ASSERT_OK(err, "hid_skel_load")) > + goto cleanup; > + } > > hidraw_fd = open_hidraw(dev_id); > if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) > @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > test_data->skel = hid_skel; > test_data->hidraw_fd = hidraw_fd; > + test_data->hid_id = hid_id; > > return 0; > > @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) > return ret; > } > > +/* > + * Attach hid_user_raw_request to the given uhid device, > + * call the bpf program from userspace > + * check that the program is called and does the expected. > + */ > +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) > +{ > + struct test_params params; > + int err, prog_fd; > + int ret = -1; > + struct hid_hw_request_syscall_args args = { > + .retval = -1, > + .type = HID_FEATURE_REPORT, > + .request_type = HID_REQ_GET_REPORT, > + .size = 10, > + }; > + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, > + .ctx_in = &args, > + .ctx_size_in = sizeof(args), > + ); > + > + err = prep_test(dev_id, NULL, ¶ms); > + if (!ASSERT_EQ(err, 0, "prep_test()")) > + goto cleanup; > + > + args.hid = params.hid_id; > + args.data[0] = 1; /* report ID */ > + > + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); > + > + err = bpf_prog_test_run_opts(prog_fd, &tattrs); > + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) > + goto cleanup; > + > + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) > + goto cleanup; > + > + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) > + goto cleanup; > + > + ret = 0; > + > +cleanup: > + cleanup_test(¶ms); > + > + return ret; > +} > + > void serial_test_hid_bpf(void) > { > int err, uhid_fd; > @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) > ASSERT_OK(err, "hid_attach_detach"); > err = test_hid_change_report(uhid_fd, dev_id); > ASSERT_OK(err, "hid_change_report"); > + err = test_hid_user_raw_request_call(uhid_fd, dev_id); > + ASSERT_OK(err, "hid_change_report"); > > destroy(uhid_fd); > > diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c > index ee7529c47ad8..e3444d444303 100644 > --- a/tools/testing/selftests/bpf/progs/hid.c > +++ b/tools/testing/selftests/bpf/progs/hid.c > @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, > unsigned int offset, > const size_t __sz) __ksym; > extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; > +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; > +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; > +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, > + __u8 *data, > + size_t len, > + enum hid_report_type type, > + int reqtype) __ksym; > > struct attach_prog_args { > int prog_fd; > @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) > 0); > return 0; > } > + > +struct hid_hw_request_syscall_args { > + /* data needs to come at offset 0 so we can do a memcpy into it */ > + __u8 data[10]; > + unsigned int hid; > + int retval; > + size_t size; > + enum hid_report_type type; > + __u8 request_type; > +}; > + > +SEC("syscall") > +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > +{ > + struct hid_bpf_ctx *ctx; > + int i, ret = 0; > + __u8 *data; > + > + ctx = hid_bpf_allocate_context(args->hid); > + if (!ctx) > + return 0; /* EPERM check */ > + > + /* We can not use the context data memory directly in the hid_bpf call, > + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context > + */ > + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); > + if (!data) > + goto out; /* EPERM check */ > + If I'm reading this right, you need more than just returning PTR_TO_MEM. Since this points into allocated ctx, nothing prevents user from accessing data after we do hid_bpf_release_context. The ref_obj_id of ctx needs to be transferred to R0.ref_obj_id, and R0.id needs to be assigned another id distinct from the ref_obj_id. My idea would be to give this type of function a new set, and handle this case of transferring ref_obj_id into R0. See is_ptr_cast_function in verifier.c. Shouldn't be too much code. You could even use the bpf_kfunc_arg_meta to store the ref_obj_id (and ensure only one referenced register exists among the 5 arguments). > + __builtin_memcpy(data, args->data, sizeof(args->data)); > + > + if (args->size <= sizeof(args->data)) { > + ret = hid_bpf_hw_request(ctx, > + data, > + args->size, > + args->type, > + args->request_type); > + args->retval = ret; > + if (ret < 0) > + goto out; > + } else { > + ret = -7; /* -E2BIG */ > + goto out; > + } > + > + __builtin_memcpy(args->data, data, sizeof(args->data)); > + > + out: > + hid_bpf_release_context(ctx); > + > + return ret; > +} > -- > 2.36.1 > -- Kartikeya
On Thu, May 19, 2022 at 12:20 AM Kumar Kartikeya Dwivedi <memxor@gmail.com> wrote: > > On Thu, May 19, 2022 at 02:29:19AM IST, Benjamin Tissoires wrote: > > Add tests for the newly implemented function. > > We test here only the GET_REPORT part because the other calls are pure > > HID protocol and won't infer the result of the test of the bpf hook. > > > > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > > > > --- > > > > changes in v5: > > - use the new hid_bpf_allocate_context() API > > - remove the need for ctx_in for syscall TEST_RUN > > > > changes in v3: > > - use the new hid_get_data API > > - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi > > > > changes in v2: > > - split the series by bpf/libbpf/hid/selftests and samples > > --- > > tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- > > tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ > > 2 files changed, 155 insertions(+), 18 deletions(-) > > > > diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c > > index 47bc0a30c275..54c0a0fcd54d 100644 > > --- a/tools/testing/selftests/bpf/prog_tests/hid.c > > +++ b/tools/testing/selftests/bpf/prog_tests/hid.c > > @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { > > 0xc0, /* END_COLLECTION */ > > }; > > > > +static u8 feature_data[] = { 1, 2 }; > > + > > struct attach_prog_args { > > int prog_fd; > > unsigned int hid; > > int retval; > > }; > > > > +struct hid_hw_request_syscall_args { > > + __u8 data[10]; > > + unsigned int hid; > > + int retval; > > + size_t size; > > + enum hid_report_type type; > > + __u8 request_type; > > +}; > > + > > static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; > > static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; > > > > @@ -142,7 +153,7 @@ static void destroy(int fd) > > > > static int uhid_event(int fd) > > { > > - struct uhid_event ev; > > + struct uhid_event ev, answer; > > ssize_t ret; > > > > memset(&ev, 0, sizeof(ev)); > > @@ -183,6 +194,15 @@ static int uhid_event(int fd) > > break; > > case UHID_GET_REPORT: > > fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); > > + > > + answer.type = UHID_GET_REPORT_REPLY; > > + answer.u.get_report_reply.id = ev.u.get_report.id; > > + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; > > + answer.u.get_report_reply.size = sizeof(feature_data); > > + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); > > + > > + uhid_write(fd, &answer); > > + > > break; > > case UHID_SET_REPORT: > > fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); > > @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) > > struct test_params { > > struct hid *skel; > > int hidraw_fd; > > + int hid_id; > > }; > > > > static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) > > @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) > > goto cleanup; > > > > - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > > - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > > - goto cleanup; > > + if (prog_name) { > > + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > > + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > > + goto cleanup; > > > > - bpf_program__set_autoload(prog, true); > > + bpf_program__set_autoload(prog, true); > > > > - err = hid__load(hid_skel); > > - if (!ASSERT_OK(err, "hid_skel_load")) > > - goto cleanup; > > + err = hid__load(hid_skel); > > + if (!ASSERT_OK(err, "hid_skel_load")) > > + goto cleanup; > > > > - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > > - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > > - err = attach_fd; > > - goto cleanup; > > - } > > + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > > + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > > + err = attach_fd; > > + goto cleanup; > > + } > > > > - args.prog_fd = bpf_program__fd(prog); > > - err = bpf_prog_test_run_opts(attach_fd, &tattr); > > - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > > - if (!ASSERT_EQ(args.retval, 0, buf)) > > - goto cleanup; > > + args.prog_fd = bpf_program__fd(prog); > > + err = bpf_prog_test_run_opts(attach_fd, &tattr); > > + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > > + if (!ASSERT_EQ(args.retval, 0, buf)) > > + goto cleanup; > > + } else { > > + err = hid__load(hid_skel); > > + if (!ASSERT_OK(err, "hid_skel_load")) > > + goto cleanup; > > + } > > > > hidraw_fd = open_hidraw(dev_id); > > if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) > > @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > > > test_data->skel = hid_skel; > > test_data->hidraw_fd = hidraw_fd; > > + test_data->hid_id = hid_id; > > > > return 0; > > > > @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) > > return ret; > > } > > > > +/* > > + * Attach hid_user_raw_request to the given uhid device, > > + * call the bpf program from userspace > > + * check that the program is called and does the expected. > > + */ > > +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) > > +{ > > + struct test_params params; > > + int err, prog_fd; > > + int ret = -1; > > + struct hid_hw_request_syscall_args args = { > > + .retval = -1, > > + .type = HID_FEATURE_REPORT, > > + .request_type = HID_REQ_GET_REPORT, > > + .size = 10, > > + }; > > + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, > > + .ctx_in = &args, > > + .ctx_size_in = sizeof(args), > > + ); > > + > > + err = prep_test(dev_id, NULL, ¶ms); > > + if (!ASSERT_EQ(err, 0, "prep_test()")) > > + goto cleanup; > > + > > + args.hid = params.hid_id; > > + args.data[0] = 1; /* report ID */ > > + > > + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); > > + > > + err = bpf_prog_test_run_opts(prog_fd, &tattrs); > > + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) > > + goto cleanup; > > + > > + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) > > + goto cleanup; > > + > > + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) > > + goto cleanup; > > + > > + ret = 0; > > + > > +cleanup: > > + cleanup_test(¶ms); > > + > > + return ret; > > +} > > + > > void serial_test_hid_bpf(void) > > { > > int err, uhid_fd; > > @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) > > ASSERT_OK(err, "hid_attach_detach"); > > err = test_hid_change_report(uhid_fd, dev_id); > > ASSERT_OK(err, "hid_change_report"); > > + err = test_hid_user_raw_request_call(uhid_fd, dev_id); > > + ASSERT_OK(err, "hid_change_report"); > > > > destroy(uhid_fd); > > > > diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c > > index ee7529c47ad8..e3444d444303 100644 > > --- a/tools/testing/selftests/bpf/progs/hid.c > > +++ b/tools/testing/selftests/bpf/progs/hid.c > > @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, > > unsigned int offset, > > const size_t __sz) __ksym; > > extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; > > +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; > > +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; > > +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, > > + __u8 *data, > > + size_t len, > > + enum hid_report_type type, > > + int reqtype) __ksym; > > > > struct attach_prog_args { > > int prog_fd; > > @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) > > 0); > > return 0; > > } > > + > > +struct hid_hw_request_syscall_args { > > + /* data needs to come at offset 0 so we can do a memcpy into it */ > > + __u8 data[10]; > > + unsigned int hid; > > + int retval; > > + size_t size; > > + enum hid_report_type type; > > + __u8 request_type; > > +}; > > + > > +SEC("syscall") > > +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > > +{ > > + struct hid_bpf_ctx *ctx; > > + int i, ret = 0; > > + __u8 *data; > > + > > + ctx = hid_bpf_allocate_context(args->hid); > > + if (!ctx) > > + return 0; /* EPERM check */ > > + > > + /* We can not use the context data memory directly in the hid_bpf call, > > + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context > > + */ > > + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); > > + if (!data) > > + goto out; /* EPERM check */ > > + > > If I'm reading this right, you need more than just returning PTR_TO_MEM. Since > this points into allocated ctx, nothing prevents user from accessing data after > we do hid_bpf_release_context. oops. I missed that point. TBH, ideally I wanted to directly pass args->data into hid_bpf_hw_request(). But because args is seen as the context of the program, I can not pass it to the kfunc arguments. I would happily prevent getting a data pointer for a manually allocated context if I could solve that issue. This would save me from calling twice __builtin_memcpy. That doesn't change the fact that you are correct and the PTR_TO_MEM in kfunc code should be fixed. But right now, I am not sure what you mean below and I'll need a little bit more time to process it. Cheers, Benjamin > > The ref_obj_id of ctx needs to be transferred to R0.ref_obj_id, and R0.id needs > to be assigned another id distinct from the ref_obj_id. > > My idea would be to give this type of function a new set, and handle this case > of transferring ref_obj_id into R0. See is_ptr_cast_function in verifier.c. > Shouldn't be too much code. You could even use the bpf_kfunc_arg_meta to store > the ref_obj_id (and ensure only one referenced register exists among the 5 > arguments). > > > + __builtin_memcpy(data, args->data, sizeof(args->data)); > > + > > + if (args->size <= sizeof(args->data)) { > > + ret = hid_bpf_hw_request(ctx, > > + data, > > + args->size, > > + args->type, > > + args->request_type); > > + args->retval = ret; > > + if (ret < 0) > > + goto out; > > + } else { > > + ret = -7; /* -E2BIG */ > > + goto out; > > + } > > + > > + __builtin_memcpy(args->data, data, sizeof(args->data)); > > + > > + out: > > + hid_bpf_release_context(ctx); > > + > > + return ret; > > +} > > -- > > 2.36.1 > > > > -- > Kartikeya >
On Thu, May 19, 2022 at 05:42:40PM IST, Benjamin Tissoires wrote: > On Thu, May 19, 2022 at 12:20 AM Kumar Kartikeya Dwivedi > <memxor@gmail.com> wrote: > > > > On Thu, May 19, 2022 at 02:29:19AM IST, Benjamin Tissoires wrote: > > > Add tests for the newly implemented function. > > > We test here only the GET_REPORT part because the other calls are pure > > > HID protocol and won't infer the result of the test of the bpf hook. > > > > > > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > > > > > > --- > > > > > > changes in v5: > > > - use the new hid_bpf_allocate_context() API > > > - remove the need for ctx_in for syscall TEST_RUN > > > > > > changes in v3: > > > - use the new hid_get_data API > > > - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi > > > > > > changes in v2: > > > - split the series by bpf/libbpf/hid/selftests and samples > > > --- > > > tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- > > > tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ > > > 2 files changed, 155 insertions(+), 18 deletions(-) > > > > > > diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c > > > index 47bc0a30c275..54c0a0fcd54d 100644 > > > --- a/tools/testing/selftests/bpf/prog_tests/hid.c > > > +++ b/tools/testing/selftests/bpf/prog_tests/hid.c > > > @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { > > > 0xc0, /* END_COLLECTION */ > > > }; > > > > > > +static u8 feature_data[] = { 1, 2 }; > > > + > > > struct attach_prog_args { > > > int prog_fd; > > > unsigned int hid; > > > int retval; > > > }; > > > > > > +struct hid_hw_request_syscall_args { > > > + __u8 data[10]; > > > + unsigned int hid; > > > + int retval; > > > + size_t size; > > > + enum hid_report_type type; > > > + __u8 request_type; > > > +}; > > > + > > > static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; > > > static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; > > > > > > @@ -142,7 +153,7 @@ static void destroy(int fd) > > > > > > static int uhid_event(int fd) > > > { > > > - struct uhid_event ev; > > > + struct uhid_event ev, answer; > > > ssize_t ret; > > > > > > memset(&ev, 0, sizeof(ev)); > > > @@ -183,6 +194,15 @@ static int uhid_event(int fd) > > > break; > > > case UHID_GET_REPORT: > > > fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); > > > + > > > + answer.type = UHID_GET_REPORT_REPLY; > > > + answer.u.get_report_reply.id = ev.u.get_report.id; > > > + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; > > > + answer.u.get_report_reply.size = sizeof(feature_data); > > > + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); > > > + > > > + uhid_write(fd, &answer); > > > + > > > break; > > > case UHID_SET_REPORT: > > > fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); > > > @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) > > > struct test_params { > > > struct hid *skel; > > > int hidraw_fd; > > > + int hid_id; > > > }; > > > > > > static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) > > > @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > > if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) > > > goto cleanup; > > > > > > - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > > > - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > > > - goto cleanup; > > > + if (prog_name) { > > > + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > > > + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > > > + goto cleanup; > > > > > > - bpf_program__set_autoload(prog, true); > > > + bpf_program__set_autoload(prog, true); > > > > > > - err = hid__load(hid_skel); > > > - if (!ASSERT_OK(err, "hid_skel_load")) > > > - goto cleanup; > > > + err = hid__load(hid_skel); > > > + if (!ASSERT_OK(err, "hid_skel_load")) > > > + goto cleanup; > > > > > > - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > > > - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > > > - err = attach_fd; > > > - goto cleanup; > > > - } > > > + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > > > + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > > > + err = attach_fd; > > > + goto cleanup; > > > + } > > > > > > - args.prog_fd = bpf_program__fd(prog); > > > - err = bpf_prog_test_run_opts(attach_fd, &tattr); > > > - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > > > - if (!ASSERT_EQ(args.retval, 0, buf)) > > > - goto cleanup; > > > + args.prog_fd = bpf_program__fd(prog); > > > + err = bpf_prog_test_run_opts(attach_fd, &tattr); > > > + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > > > + if (!ASSERT_EQ(args.retval, 0, buf)) > > > + goto cleanup; > > > + } else { > > > + err = hid__load(hid_skel); > > > + if (!ASSERT_OK(err, "hid_skel_load")) > > > + goto cleanup; > > > + } > > > > > > hidraw_fd = open_hidraw(dev_id); > > > if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) > > > @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > > > > > test_data->skel = hid_skel; > > > test_data->hidraw_fd = hidraw_fd; > > > + test_data->hid_id = hid_id; > > > > > > return 0; > > > > > > @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) > > > return ret; > > > } > > > > > > +/* > > > + * Attach hid_user_raw_request to the given uhid device, > > > + * call the bpf program from userspace > > > + * check that the program is called and does the expected. > > > + */ > > > +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) > > > +{ > > > + struct test_params params; > > > + int err, prog_fd; > > > + int ret = -1; > > > + struct hid_hw_request_syscall_args args = { > > > + .retval = -1, > > > + .type = HID_FEATURE_REPORT, > > > + .request_type = HID_REQ_GET_REPORT, > > > + .size = 10, > > > + }; > > > + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, > > > + .ctx_in = &args, > > > + .ctx_size_in = sizeof(args), > > > + ); > > > + > > > + err = prep_test(dev_id, NULL, ¶ms); > > > + if (!ASSERT_EQ(err, 0, "prep_test()")) > > > + goto cleanup; > > > + > > > + args.hid = params.hid_id; > > > + args.data[0] = 1; /* report ID */ > > > + > > > + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); > > > + > > > + err = bpf_prog_test_run_opts(prog_fd, &tattrs); > > > + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) > > > + goto cleanup; > > > + > > > + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) > > > + goto cleanup; > > > + > > > + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) > > > + goto cleanup; > > > + > > > + ret = 0; > > > + > > > +cleanup: > > > + cleanup_test(¶ms); > > > + > > > + return ret; > > > +} > > > + > > > void serial_test_hid_bpf(void) > > > { > > > int err, uhid_fd; > > > @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) > > > ASSERT_OK(err, "hid_attach_detach"); > > > err = test_hid_change_report(uhid_fd, dev_id); > > > ASSERT_OK(err, "hid_change_report"); > > > + err = test_hid_user_raw_request_call(uhid_fd, dev_id); > > > + ASSERT_OK(err, "hid_change_report"); > > > > > > destroy(uhid_fd); > > > > > > diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c > > > index ee7529c47ad8..e3444d444303 100644 > > > --- a/tools/testing/selftests/bpf/progs/hid.c > > > +++ b/tools/testing/selftests/bpf/progs/hid.c > > > @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, > > > unsigned int offset, > > > const size_t __sz) __ksym; > > > extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; > > > +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; > > > +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; > > > +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, > > > + __u8 *data, > > > + size_t len, > > > + enum hid_report_type type, > > > + int reqtype) __ksym; > > > > > > struct attach_prog_args { > > > int prog_fd; > > > @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) > > > 0); > > > return 0; > > > } > > > + > > > +struct hid_hw_request_syscall_args { > > > + /* data needs to come at offset 0 so we can do a memcpy into it */ > > > + __u8 data[10]; > > > + unsigned int hid; > > > + int retval; > > > + size_t size; > > > + enum hid_report_type type; > > > + __u8 request_type; > > > +}; > > > + > > > +SEC("syscall") > > > +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > > > +{ > > > + struct hid_bpf_ctx *ctx; > > > + int i, ret = 0; > > > + __u8 *data; > > > + > > > + ctx = hid_bpf_allocate_context(args->hid); > > > + if (!ctx) > > > + return 0; /* EPERM check */ > > > + > > > + /* We can not use the context data memory directly in the hid_bpf call, > > > + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context > > > + */ > > > + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); > > > + if (!data) > > > + goto out; /* EPERM check */ > > > + > > > > If I'm reading this right, you need more than just returning PTR_TO_MEM. Since > > this points into allocated ctx, nothing prevents user from accessing data after > > we do hid_bpf_release_context. > > oops. I missed that point. > > TBH, ideally I wanted to directly pass args->data into > hid_bpf_hw_request(). But because args is seen as the context of the > program, I can not pass it to the kfunc arguments. > I would happily prevent getting a data pointer for a manually > allocated context if I could solve that issue. This would save me from > calling twice __builtin_memcpy. Oh, is that why you need to do this? So if you were able to pass args->data, you wouldn't need this hid_bpf_get_data? kfunc does support taking PTR_TO_CTX (i.e. args in your case), I am not sure why you're not passing it in directly then. Did you encounter any errors when trying to do so? The only requirement is that args offset must be 0 (i.e. passed as is without increment). > > That doesn't change the fact that you are correct and the PTR_TO_MEM > in kfunc code should be fixed. > But right now, I am not sure what you mean below and I'll need a > little bit more time to process it. > > Cheers, > Benjamin > > > > > The ref_obj_id of ctx needs to be transferred to R0.ref_obj_id, and R0.id needs > > to be assigned another id distinct from the ref_obj_id. > > > > My idea would be to give this type of function a new set, and handle this case > > of transferring ref_obj_id into R0. See is_ptr_cast_function in verifier.c. > > Shouldn't be too much code. You could even use the bpf_kfunc_arg_meta to store > > the ref_obj_id (and ensure only one referenced register exists among the 5 > > arguments). > > > > > + __builtin_memcpy(data, args->data, sizeof(args->data)); > > > + > > > + if (args->size <= sizeof(args->data)) { > > > + ret = hid_bpf_hw_request(ctx, > > > + data, > > > + args->size, > > > + args->type, > > > + args->request_type); > > > + args->retval = ret; > > > + if (ret < 0) > > > + goto out; > > > + } else { > > > + ret = -7; /* -E2BIG */ > > > + goto out; > > > + } > > > + > > > + __builtin_memcpy(args->data, data, sizeof(args->data)); > > > + > > > + out: > > > + hid_bpf_release_context(ctx); > > > + > > > + return ret; > > > +} > > > -- > > > 2.36.1 > > > > > > > -- > > Kartikeya > > > -- Kartikeya
On 5/19/22 14:51, Kumar Kartikeya Dwivedi wrote: > On Thu, May 19, 2022 at 05:42:40PM IST, Benjamin Tissoires wrote: >> On Thu, May 19, 2022 at 12:20 AM Kumar Kartikeya Dwivedi >> <memxor@gmail.com> wrote: >>> >>> On Thu, May 19, 2022 at 02:29:19AM IST, Benjamin Tissoires wrote: >>>> Add tests for the newly implemented function. >>>> We test here only the GET_REPORT part because the other calls are pure >>>> HID protocol and won't infer the result of the test of the bpf hook. >>>> >>>> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> >>>> >>>> --- >>>> >>>> changes in v5: >>>> - use the new hid_bpf_allocate_context() API >>>> - remove the need for ctx_in for syscall TEST_RUN >>>> >>>> changes in v3: >>>> - use the new hid_get_data API >>>> - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi >>>> >>>> changes in v2: >>>> - split the series by bpf/libbpf/hid/selftests and samples >>>> --- >>>> tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- >>>> tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ >>>> 2 files changed, 155 insertions(+), 18 deletions(-) >>>> >>>> diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c >>>> index 47bc0a30c275..54c0a0fcd54d 100644 >>>> --- a/tools/testing/selftests/bpf/prog_tests/hid.c >>>> +++ b/tools/testing/selftests/bpf/prog_tests/hid.c >>>> @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { >>>> 0xc0, /* END_COLLECTION */ >>>> }; >>>> >>>> +static u8 feature_data[] = { 1, 2 }; >>>> + >>>> struct attach_prog_args { >>>> int prog_fd; >>>> unsigned int hid; >>>> int retval; >>>> }; >>>> >>>> +struct hid_hw_request_syscall_args { >>>> + __u8 data[10]; >>>> + unsigned int hid; >>>> + int retval; >>>> + size_t size; >>>> + enum hid_report_type type; >>>> + __u8 request_type; >>>> +}; >>>> + >>>> static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; >>>> static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; >>>> >>>> @@ -142,7 +153,7 @@ static void destroy(int fd) >>>> >>>> static int uhid_event(int fd) >>>> { >>>> - struct uhid_event ev; >>>> + struct uhid_event ev, answer; >>>> ssize_t ret; >>>> >>>> memset(&ev, 0, sizeof(ev)); >>>> @@ -183,6 +194,15 @@ static int uhid_event(int fd) >>>> break; >>>> case UHID_GET_REPORT: >>>> fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); >>>> + >>>> + answer.type = UHID_GET_REPORT_REPLY; >>>> + answer.u.get_report_reply.id = ev.u.get_report.id; >>>> + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; >>>> + answer.u.get_report_reply.size = sizeof(feature_data); >>>> + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); >>>> + >>>> + uhid_write(fd, &answer); >>>> + >>>> break; >>>> case UHID_SET_REPORT: >>>> fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); >>>> @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) >>>> struct test_params { >>>> struct hid *skel; >>>> int hidraw_fd; >>>> + int hid_id; >>>> }; >>>> >>>> static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) >>>> @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test >>>> if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) >>>> goto cleanup; >>>> >>>> - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); >>>> - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) >>>> - goto cleanup; >>>> + if (prog_name) { >>>> + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); >>>> + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) >>>> + goto cleanup; >>>> >>>> - bpf_program__set_autoload(prog, true); >>>> + bpf_program__set_autoload(prog, true); >>>> >>>> - err = hid__load(hid_skel); >>>> - if (!ASSERT_OK(err, "hid_skel_load")) >>>> - goto cleanup; >>>> + err = hid__load(hid_skel); >>>> + if (!ASSERT_OK(err, "hid_skel_load")) >>>> + goto cleanup; >>>> >>>> - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); >>>> - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { >>>> - err = attach_fd; >>>> - goto cleanup; >>>> - } >>>> + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); >>>> + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { >>>> + err = attach_fd; >>>> + goto cleanup; >>>> + } >>>> >>>> - args.prog_fd = bpf_program__fd(prog); >>>> - err = bpf_prog_test_run_opts(attach_fd, &tattr); >>>> - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); >>>> - if (!ASSERT_EQ(args.retval, 0, buf)) >>>> - goto cleanup; >>>> + args.prog_fd = bpf_program__fd(prog); >>>> + err = bpf_prog_test_run_opts(attach_fd, &tattr); >>>> + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); >>>> + if (!ASSERT_EQ(args.retval, 0, buf)) >>>> + goto cleanup; >>>> + } else { >>>> + err = hid__load(hid_skel); >>>> + if (!ASSERT_OK(err, "hid_skel_load")) >>>> + goto cleanup; >>>> + } >>>> >>>> hidraw_fd = open_hidraw(dev_id); >>>> if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) >>>> @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test >>>> >>>> test_data->skel = hid_skel; >>>> test_data->hidraw_fd = hidraw_fd; >>>> + test_data->hid_id = hid_id; >>>> >>>> return 0; >>>> >>>> @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) >>>> return ret; >>>> } >>>> >>>> +/* >>>> + * Attach hid_user_raw_request to the given uhid device, >>>> + * call the bpf program from userspace >>>> + * check that the program is called and does the expected. >>>> + */ >>>> +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) >>>> +{ >>>> + struct test_params params; >>>> + int err, prog_fd; >>>> + int ret = -1; >>>> + struct hid_hw_request_syscall_args args = { >>>> + .retval = -1, >>>> + .type = HID_FEATURE_REPORT, >>>> + .request_type = HID_REQ_GET_REPORT, >>>> + .size = 10, >>>> + }; >>>> + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, >>>> + .ctx_in = &args, >>>> + .ctx_size_in = sizeof(args), >>>> + ); >>>> + >>>> + err = prep_test(dev_id, NULL, ¶ms); >>>> + if (!ASSERT_EQ(err, 0, "prep_test()")) >>>> + goto cleanup; >>>> + >>>> + args.hid = params.hid_id; >>>> + args.data[0] = 1; /* report ID */ >>>> + >>>> + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); >>>> + >>>> + err = bpf_prog_test_run_opts(prog_fd, &tattrs); >>>> + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) >>>> + goto cleanup; >>>> + >>>> + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) >>>> + goto cleanup; >>>> + >>>> + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) >>>> + goto cleanup; >>>> + >>>> + ret = 0; >>>> + >>>> +cleanup: >>>> + cleanup_test(¶ms); >>>> + >>>> + return ret; >>>> +} >>>> + >>>> void serial_test_hid_bpf(void) >>>> { >>>> int err, uhid_fd; >>>> @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) >>>> ASSERT_OK(err, "hid_attach_detach"); >>>> err = test_hid_change_report(uhid_fd, dev_id); >>>> ASSERT_OK(err, "hid_change_report"); >>>> + err = test_hid_user_raw_request_call(uhid_fd, dev_id); >>>> + ASSERT_OK(err, "hid_change_report"); >>>> >>>> destroy(uhid_fd); >>>> >>>> diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c >>>> index ee7529c47ad8..e3444d444303 100644 >>>> --- a/tools/testing/selftests/bpf/progs/hid.c >>>> +++ b/tools/testing/selftests/bpf/progs/hid.c >>>> @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, >>>> unsigned int offset, >>>> const size_t __sz) __ksym; >>>> extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; >>>> +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; >>>> +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; >>>> +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, >>>> + __u8 *data, >>>> + size_t len, >>>> + enum hid_report_type type, >>>> + int reqtype) __ksym; >>>> >>>> struct attach_prog_args { >>>> int prog_fd; >>>> @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) >>>> 0); >>>> return 0; >>>> } >>>> + >>>> +struct hid_hw_request_syscall_args { >>>> + /* data needs to come at offset 0 so we can do a memcpy into it */ >>>> + __u8 data[10]; >>>> + unsigned int hid; >>>> + int retval; >>>> + size_t size; >>>> + enum hid_report_type type; >>>> + __u8 request_type; >>>> +}; >>>> + >>>> +SEC("syscall") >>>> +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) >>>> +{ >>>> + struct hid_bpf_ctx *ctx; >>>> + int i, ret = 0; >>>> + __u8 *data; >>>> + >>>> + ctx = hid_bpf_allocate_context(args->hid); >>>> + if (!ctx) >>>> + return 0; /* EPERM check */ >>>> + >>>> + /* We can not use the context data memory directly in the hid_bpf call, >>>> + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context >>>> + */ >>>> + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); >>>> + if (!data) >>>> + goto out; /* EPERM check */ >>>> + >>> >>> If I'm reading this right, you need more than just returning PTR_TO_MEM. Since >>> this points into allocated ctx, nothing prevents user from accessing data after >>> we do hid_bpf_release_context. >> >> oops. I missed that point. >> >> TBH, ideally I wanted to directly pass args->data into >> hid_bpf_hw_request(). But because args is seen as the context of the >> program, I can not pass it to the kfunc arguments. >> I would happily prevent getting a data pointer for a manually >> allocated context if I could solve that issue. This would save me from >> calling twice __builtin_memcpy. > > Oh, is that why you need to do this? So if you were able to pass args->data, you > wouldn't need this hid_bpf_get_data? kfunc does support taking PTR_TO_CTX (i.e. > args in your case), I am not sure why you're not passing it in directly then. > Did you encounter any errors when trying to do so? The only requirement is that > args offset must be 0 (i.e. passed as is without increment). With the following patch applied, the tests are failing: --- diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c index 43724fd26fb9..976fc8b83934 100644 --- a/tools/testing/selftests/bpf/progs/hid.c +++ b/tools/testing/selftests/bpf/progs/hid.c @@ -80,24 +80,14 @@ int hid_user_raw_request(struct hid_hw_request_syscall_args *args) { struct hid_bpf_ctx *ctx; int i, ret = 0; - __u8 *data; ctx = hid_bpf_allocate_context(args->hid); if (!ctx) return 0; /* EPERM check */ - /* We can not use the context data memory directly in the hid_bpf call, - * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context - */ - data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); - if (!data) - goto out; /* EPERM check */ - - __builtin_memcpy(data, args->data, sizeof(args->data)); - if (args->size <= sizeof(args->data)) { ret = hid_bpf_hw_request(ctx, - data, + args->data, args->size, args->type, args->request_type); @@ -109,8 +99,6 @@ int hid_user_raw_request(struct hid_hw_request_syscall_args *args) goto out; } - __builtin_memcpy(args->data, data, sizeof(args->data)); - out: hid_bpf_release_context(ctx); --- Output of the verifier: libbpf: prog 'hid_user_raw_request': BPF program load failed: Invalid argument libbpf: prog 'hid_user_raw_request': -- BEGIN PROG LOAD LOG -- R1 type=ctx expected=fp 0: R1=ctx(off=0,imm=0) R10=fp0 ; int hid_user_raw_request(struct hid_hw_request_syscall_args *args) 0: (bf) r7 = r1 ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0) ; ctx = hid_bpf_allocate_context(args->hid); 1: (61) r1 = *(u32 *)(r7 +12) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R7_w=ctx(off=0,imm=0) ; ctx = hid_bpf_allocate_context(args->hid); 2: (85) call hid_bpf_allocate_context#66484 3: (bf) r6 = r0 ; R0_w=ptr_or_null_hid_bpf_ctx(id=2,ref_obj_id=2,off=0,imm=0) R6_w=ptr_or_null_hid_bpf_ctx(id=2,ref_obj_id=2,off=0,imm=0) refs=2 4: (b4) w8 = 0 ; R8_w=0 refs=2 ; if (!ctx) 5: (15) if r6 == 0x0 goto pc+12 ; R6_w=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) refs=2 6: (b4) w8 = -7 ; R8_w=4294967289 refs=2 ; if (args->size <= sizeof(args->data)) { 7: (79) r3 = *(u64 *)(r7 +24) ; R3=scalar() R7=ctx(off=0,imm=0) refs=2 ; if (args->size <= sizeof(args->data)) { 8: (25) if r3 > 0xa goto pc+7 ; R3=scalar(umax=10,var_off=(0x0; 0xf)) refs=2 ; args->request_type); 9: (71) r5 = *(u8 *)(r7 +36) ; R5_w=scalar(umax=255,var_off=(0x0; 0xff)) R7=ctx(off=0,imm=0) refs=2 ; args->type, 10: (61) r4 = *(u32 *)(r7 +32) ; R4_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R7=ctx(off=0,imm=0) refs=2 ; ret = hid_bpf_hw_request(ctx, 11: (bf) r1 = r6 ; R1_w=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) R6=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) refs=2 12: (bf) r2 = r7 ; R2_w=ctx(off=0,imm=0) R7=ctx(off=0,imm=0) refs=2 13: (85) call hid_bpf_hw_request#66480 R2 type=ctx expected=fp processed 14 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 -- END PROG LOAD LOG -- Maybe I am wrongly declaring hid_bpf_hw_request()? Cheers, Benjamin > >> >> That doesn't change the fact that you are correct and the PTR_TO_MEM >> in kfunc code should be fixed. >> But right now, I am not sure what you mean below and I'll need a >> little bit more time to process it. >> >> Cheers, >> Benjamin >> >>> >>> The ref_obj_id of ctx needs to be transferred to R0.ref_obj_id, and R0.id needs >>> to be assigned another id distinct from the ref_obj_id. >>> >>> My idea would be to give this type of function a new set, and handle this case >>> of transferring ref_obj_id into R0. See is_ptr_cast_function in verifier.c. >>> Shouldn't be too much code. You could even use the bpf_kfunc_arg_meta to store >>> the ref_obj_id (and ensure only one referenced register exists among the 5 >>> arguments). >>> >>>> + __builtin_memcpy(data, args->data, sizeof(args->data)); >>>> + >>>> + if (args->size <= sizeof(args->data)) { >>>> + ret = hid_bpf_hw_request(ctx, >>>> + data, >>>> + args->size, >>>> + args->type, >>>> + args->request_type); >>>> + args->retval = ret; >>>> + if (ret < 0) >>>> + goto out; >>>> + } else { >>>> + ret = -7; /* -E2BIG */ >>>> + goto out; >>>> + } >>>> + >>>> + __builtin_memcpy(args->data, data, sizeof(args->data)); >>>> + >>>> + out: >>>> + hid_bpf_release_context(ctx); >>>> + >>>> + return ret; >>>> +} >>>> -- >>>> 2.36.1 >>>> >>> >>> -- >>> Kartikeya >>> >> > > -- > Kartikeya >
On Thu, May 19, 2022 at 06:43:41PM IST, Benjamin Tissoires wrote: > On 5/19/22 14:51, Kumar Kartikeya Dwivedi wrote: > > On Thu, May 19, 2022 at 05:42:40PM IST, Benjamin Tissoires wrote: > > > On Thu, May 19, 2022 at 12:20 AM Kumar Kartikeya Dwivedi > > > <memxor@gmail.com> wrote: > > > > > > > > On Thu, May 19, 2022 at 02:29:19AM IST, Benjamin Tissoires wrote: > > > > > Add tests for the newly implemented function. > > > > > We test here only the GET_REPORT part because the other calls are pure > > > > > HID protocol and won't infer the result of the test of the bpf hook. > > > > > > > > > > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > > > > > > > > > > --- > > > > > > > > > > changes in v5: > > > > > - use the new hid_bpf_allocate_context() API > > > > > - remove the need for ctx_in for syscall TEST_RUN > > > > > > > > > > changes in v3: > > > > > - use the new hid_get_data API > > > > > - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi > > > > > > > > > > changes in v2: > > > > > - split the series by bpf/libbpf/hid/selftests and samples > > > > > --- > > > > > tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- > > > > > tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ > > > > > 2 files changed, 155 insertions(+), 18 deletions(-) > > > > > > > > > > diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c > > > > > index 47bc0a30c275..54c0a0fcd54d 100644 > > > > > --- a/tools/testing/selftests/bpf/prog_tests/hid.c > > > > > +++ b/tools/testing/selftests/bpf/prog_tests/hid.c > > > > > @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { > > > > > 0xc0, /* END_COLLECTION */ > > > > > }; > > > > > > > > > > +static u8 feature_data[] = { 1, 2 }; > > > > > + > > > > > struct attach_prog_args { > > > > > int prog_fd; > > > > > unsigned int hid; > > > > > int retval; > > > > > }; > > > > > > > > > > +struct hid_hw_request_syscall_args { > > > > > + __u8 data[10]; > > > > > + unsigned int hid; > > > > > + int retval; > > > > > + size_t size; > > > > > + enum hid_report_type type; > > > > > + __u8 request_type; > > > > > +}; > > > > > + > > > > > static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; > > > > > static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; > > > > > > > > > > @@ -142,7 +153,7 @@ static void destroy(int fd) > > > > > > > > > > static int uhid_event(int fd) > > > > > { > > > > > - struct uhid_event ev; > > > > > + struct uhid_event ev, answer; > > > > > ssize_t ret; > > > > > > > > > > memset(&ev, 0, sizeof(ev)); > > > > > @@ -183,6 +194,15 @@ static int uhid_event(int fd) > > > > > break; > > > > > case UHID_GET_REPORT: > > > > > fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); > > > > > + > > > > > + answer.type = UHID_GET_REPORT_REPLY; > > > > > + answer.u.get_report_reply.id = ev.u.get_report.id; > > > > > + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; > > > > > + answer.u.get_report_reply.size = sizeof(feature_data); > > > > > + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); > > > > > + > > > > > + uhid_write(fd, &answer); > > > > > + > > > > > break; > > > > > case UHID_SET_REPORT: > > > > > fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); > > > > > @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) > > > > > struct test_params { > > > > > struct hid *skel; > > > > > int hidraw_fd; > > > > > + int hid_id; > > > > > }; > > > > > > > > > > static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) > > > > > @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > > > > if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) > > > > > goto cleanup; > > > > > > > > > > - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > > > > > - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > > > > > - goto cleanup; > > > > > + if (prog_name) { > > > > > + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); > > > > > + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) > > > > > + goto cleanup; > > > > > > > > > > - bpf_program__set_autoload(prog, true); > > > > > + bpf_program__set_autoload(prog, true); > > > > > > > > > > - err = hid__load(hid_skel); > > > > > - if (!ASSERT_OK(err, "hid_skel_load")) > > > > > - goto cleanup; > > > > > + err = hid__load(hid_skel); > > > > > + if (!ASSERT_OK(err, "hid_skel_load")) > > > > > + goto cleanup; > > > > > > > > > > - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > > > > > - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > > > > > - err = attach_fd; > > > > > - goto cleanup; > > > > > - } > > > > > + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); > > > > > + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { > > > > > + err = attach_fd; > > > > > + goto cleanup; > > > > > + } > > > > > > > > > > - args.prog_fd = bpf_program__fd(prog); > > > > > - err = bpf_prog_test_run_opts(attach_fd, &tattr); > > > > > - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > > > > > - if (!ASSERT_EQ(args.retval, 0, buf)) > > > > > - goto cleanup; > > > > > + args.prog_fd = bpf_program__fd(prog); > > > > > + err = bpf_prog_test_run_opts(attach_fd, &tattr); > > > > > + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); > > > > > + if (!ASSERT_EQ(args.retval, 0, buf)) > > > > > + goto cleanup; > > > > > + } else { > > > > > + err = hid__load(hid_skel); > > > > > + if (!ASSERT_OK(err, "hid_skel_load")) > > > > > + goto cleanup; > > > > > + } > > > > > > > > > > hidraw_fd = open_hidraw(dev_id); > > > > > if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) > > > > > @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test > > > > > > > > > > test_data->skel = hid_skel; > > > > > test_data->hidraw_fd = hidraw_fd; > > > > > + test_data->hid_id = hid_id; > > > > > > > > > > return 0; > > > > > > > > > > @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) > > > > > return ret; > > > > > } > > > > > > > > > > +/* > > > > > + * Attach hid_user_raw_request to the given uhid device, > > > > > + * call the bpf program from userspace > > > > > + * check that the program is called and does the expected. > > > > > + */ > > > > > +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) > > > > > +{ > > > > > + struct test_params params; > > > > > + int err, prog_fd; > > > > > + int ret = -1; > > > > > + struct hid_hw_request_syscall_args args = { > > > > > + .retval = -1, > > > > > + .type = HID_FEATURE_REPORT, > > > > > + .request_type = HID_REQ_GET_REPORT, > > > > > + .size = 10, > > > > > + }; > > > > > + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, > > > > > + .ctx_in = &args, > > > > > + .ctx_size_in = sizeof(args), > > > > > + ); > > > > > + > > > > > + err = prep_test(dev_id, NULL, ¶ms); > > > > > + if (!ASSERT_EQ(err, 0, "prep_test()")) > > > > > + goto cleanup; > > > > > + > > > > > + args.hid = params.hid_id; > > > > > + args.data[0] = 1; /* report ID */ > > > > > + > > > > > + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); > > > > > + > > > > > + err = bpf_prog_test_run_opts(prog_fd, &tattrs); > > > > > + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) > > > > > + goto cleanup; > > > > > + > > > > > + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) > > > > > + goto cleanup; > > > > > + > > > > > + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) > > > > > + goto cleanup; > > > > > + > > > > > + ret = 0; > > > > > + > > > > > +cleanup: > > > > > + cleanup_test(¶ms); > > > > > + > > > > > + return ret; > > > > > +} > > > > > + > > > > > void serial_test_hid_bpf(void) > > > > > { > > > > > int err, uhid_fd; > > > > > @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) > > > > > ASSERT_OK(err, "hid_attach_detach"); > > > > > err = test_hid_change_report(uhid_fd, dev_id); > > > > > ASSERT_OK(err, "hid_change_report"); > > > > > + err = test_hid_user_raw_request_call(uhid_fd, dev_id); > > > > > + ASSERT_OK(err, "hid_change_report"); > > > > > > > > > > destroy(uhid_fd); > > > > > > > > > > diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c > > > > > index ee7529c47ad8..e3444d444303 100644 > > > > > --- a/tools/testing/selftests/bpf/progs/hid.c > > > > > +++ b/tools/testing/selftests/bpf/progs/hid.c > > > > > @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, > > > > > unsigned int offset, > > > > > const size_t __sz) __ksym; > > > > > extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; > > > > > +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; > > > > > +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; > > > > > +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, > > > > > + __u8 *data, > > > > > + size_t len, > > > > > + enum hid_report_type type, > > > > > + int reqtype) __ksym; > > > > > > > > > > struct attach_prog_args { > > > > > int prog_fd; > > > > > @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) > > > > > 0); > > > > > return 0; > > > > > } > > > > > + > > > > > +struct hid_hw_request_syscall_args { > > > > > + /* data needs to come at offset 0 so we can do a memcpy into it */ > > > > > + __u8 data[10]; > > > > > + unsigned int hid; > > > > > + int retval; > > > > > + size_t size; > > > > > + enum hid_report_type type; > > > > > + __u8 request_type; > > > > > +}; > > > > > + > > > > > +SEC("syscall") > > > > > +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > > > > > +{ > > > > > + struct hid_bpf_ctx *ctx; > > > > > + int i, ret = 0; > > > > > + __u8 *data; > > > > > + > > > > > + ctx = hid_bpf_allocate_context(args->hid); > > > > > + if (!ctx) > > > > > + return 0; /* EPERM check */ > > > > > + > > > > > + /* We can not use the context data memory directly in the hid_bpf call, > > > > > + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context > > > > > + */ > > > > > + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); > > > > > + if (!data) > > > > > + goto out; /* EPERM check */ > > > > > + > > > > > > > > If I'm reading this right, you need more than just returning PTR_TO_MEM. Since > > > > this points into allocated ctx, nothing prevents user from accessing data after > > > > we do hid_bpf_release_context. > > > > > > oops. I missed that point. > > > > > > TBH, ideally I wanted to directly pass args->data into > > > hid_bpf_hw_request(). But because args is seen as the context of the > > > program, I can not pass it to the kfunc arguments. > > > I would happily prevent getting a data pointer for a manually > > > allocated context if I could solve that issue. This would save me from > > > calling twice __builtin_memcpy. > > > > Oh, is that why you need to do this? So if you were able to pass args->data, you > > wouldn't need this hid_bpf_get_data? kfunc does support taking PTR_TO_CTX (i.e. > > args in your case), I am not sure why you're not passing it in directly then. > > Did you encounter any errors when trying to do so? The only requirement is that > > args offset must be 0 (i.e. passed as is without increment). > > With the following patch applied, the tests are failing: > --- > diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c > index 43724fd26fb9..976fc8b83934 100644 > --- a/tools/testing/selftests/bpf/progs/hid.c > +++ b/tools/testing/selftests/bpf/progs/hid.c > @@ -80,24 +80,14 @@ int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > { > struct hid_bpf_ctx *ctx; > int i, ret = 0; > - __u8 *data; > ctx = hid_bpf_allocate_context(args->hid); > if (!ctx) > return 0; /* EPERM check */ > - /* We can not use the context data memory directly in the hid_bpf call, > - * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context > - */ > - data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); > - if (!data) > - goto out; /* EPERM check */ > - > - __builtin_memcpy(data, args->data, sizeof(args->data)); > - > if (args->size <= sizeof(args->data)) { > ret = hid_bpf_hw_request(ctx, > - data, > + args->data, > args->size, > args->type, > args->request_type); > @@ -109,8 +99,6 @@ int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > goto out; > } > - __builtin_memcpy(args->data, data, sizeof(args->data)); > - > out: > hid_bpf_release_context(ctx); > --- > > Output of the verifier: > > libbpf: prog 'hid_user_raw_request': BPF program load failed: Invalid argument > libbpf: prog 'hid_user_raw_request': -- BEGIN PROG LOAD LOG -- > R1 type=ctx expected=fp > 0: R1=ctx(off=0,imm=0) R10=fp0 > ; int hid_user_raw_request(struct hid_hw_request_syscall_args *args) > 0: (bf) r7 = r1 ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0) > ; ctx = hid_bpf_allocate_context(args->hid); > 1: (61) r1 = *(u32 *)(r7 +12) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R7_w=ctx(off=0,imm=0) > ; ctx = hid_bpf_allocate_context(args->hid); > 2: (85) call hid_bpf_allocate_context#66484 > 3: (bf) r6 = r0 ; R0_w=ptr_or_null_hid_bpf_ctx(id=2,ref_obj_id=2,off=0,imm=0) R6_w=ptr_or_null_hid_bpf_ctx(id=2,ref_obj_id=2,off=0,imm=0) refs=2 > 4: (b4) w8 = 0 ; R8_w=0 refs=2 > ; if (!ctx) > 5: (15) if r6 == 0x0 goto pc+12 ; R6_w=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) refs=2 > 6: (b4) w8 = -7 ; R8_w=4294967289 refs=2 > ; if (args->size <= sizeof(args->data)) { > 7: (79) r3 = *(u64 *)(r7 +24) ; R3=scalar() R7=ctx(off=0,imm=0) refs=2 > ; if (args->size <= sizeof(args->data)) { > 8: (25) if r3 > 0xa goto pc+7 ; R3=scalar(umax=10,var_off=(0x0; 0xf)) refs=2 > ; args->request_type); > 9: (71) r5 = *(u8 *)(r7 +36) ; R5_w=scalar(umax=255,var_off=(0x0; 0xff)) R7=ctx(off=0,imm=0) refs=2 > ; args->type, > 10: (61) r4 = *(u32 *)(r7 +32) ; R4_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R7=ctx(off=0,imm=0) refs=2 > ; ret = hid_bpf_hw_request(ctx, > 11: (bf) r1 = r6 ; R1_w=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) R6=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) refs=2 > 12: (bf) r2 = r7 ; R2_w=ctx(off=0,imm=0) R7=ctx(off=0,imm=0) refs=2 > 13: (85) call hid_bpf_hw_request#66480 > R2 type=ctx expected=fp > processed 14 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 > -- END PROG LOAD LOG -- > > Maybe I am wrongly declaring hid_bpf_hw_request()? > Ah, I see. This is because current code does not handle syscall prog. We need to teach bpf_get_prog_ctx_type to handle this case for BPF_PROG_TYPE_SYSCALL. We can use the ctx size at verification time, we will have to ensure the size is greater than or equal to the size of struct expected by hid_bpf_hw_request for that arg. Currently the type of ctx is void * for syscall progs, which obviously is indicating lack of known size of ctx at compile time. In your case, you have a pair of args that pass a certain size while expecting ctx as data of some len. For these variable sized ctx, we should probably just make kfunc define void *, len__ctx_sz (__ctx_sz suffix) pair of args. If it sees void * as arg type and as ctx as pointer type, it tries to check if arguments are set up like this. Probably only makes sense doing for syscall progs since ctx is user supplied. You can look at existing handling for __sz suffix for inspiration. > Cheers, > Benjamin > > > > > > > > > That doesn't change the fact that you are correct and the PTR_TO_MEM > > > in kfunc code should be fixed. > > > But right now, I am not sure what you mean below and I'll need a > > > little bit more time to process it. > > > > > > Cheers, > > > Benjamin > > > > > > > > > > > The ref_obj_id of ctx needs to be transferred to R0.ref_obj_id, and R0.id needs > > > > to be assigned another id distinct from the ref_obj_id. > > > > > > > > My idea would be to give this type of function a new set, and handle this case > > > > of transferring ref_obj_id into R0. See is_ptr_cast_function in verifier.c. > > > > Shouldn't be too much code. You could even use the bpf_kfunc_arg_meta to store > > > > the ref_obj_id (and ensure only one referenced register exists among the 5 > > > > arguments). > > > > > > > > > + __builtin_memcpy(data, args->data, sizeof(args->data)); > > > > > + > > > > > + if (args->size <= sizeof(args->data)) { > > > > > + ret = hid_bpf_hw_request(ctx, > > > > > + data, > > > > > + args->size, > > > > > + args->type, > > > > > + args->request_type); > > > > > + args->retval = ret; > > > > > + if (ret < 0) > > > > > + goto out; > > > > > + } else { > > > > > + ret = -7; /* -E2BIG */ > > > > > + goto out; > > > > > + } > > > > > + > > > > > + __builtin_memcpy(args->data, data, sizeof(args->data)); > > > > > + > > > > > + out: > > > > > + hid_bpf_release_context(ctx); > > > > > + > > > > > + return ret; > > > > > +} > > > > > -- > > > > > 2.36.1 > > > > > > > > > > > > > -- > > > > Kartikeya > > > > > > > > > > > -- > > Kartikeya > > > -- Kartikeya
On 5/19/22 15:44, Kumar Kartikeya Dwivedi wrote: > On Thu, May 19, 2022 at 06:43:41PM IST, Benjamin Tissoires wrote: >> On 5/19/22 14:51, Kumar Kartikeya Dwivedi wrote: >>> On Thu, May 19, 2022 at 05:42:40PM IST, Benjamin Tissoires wrote: >>>> On Thu, May 19, 2022 at 12:20 AM Kumar Kartikeya Dwivedi >>>> <memxor@gmail.com> wrote: >>>>> >>>>> On Thu, May 19, 2022 at 02:29:19AM IST, Benjamin Tissoires wrote: >>>>>> Add tests for the newly implemented function. >>>>>> We test here only the GET_REPORT part because the other calls are pure >>>>>> HID protocol and won't infer the result of the test of the bpf hook. >>>>>> >>>>>> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> >>>>>> >>>>>> --- >>>>>> >>>>>> changes in v5: >>>>>> - use the new hid_bpf_allocate_context() API >>>>>> - remove the need for ctx_in for syscall TEST_RUN >>>>>> >>>>>> changes in v3: >>>>>> - use the new hid_get_data API >>>>>> - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi >>>>>> >>>>>> changes in v2: >>>>>> - split the series by bpf/libbpf/hid/selftests and samples >>>>>> --- >>>>>> tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- >>>>>> tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ >>>>>> 2 files changed, 155 insertions(+), 18 deletions(-) >>>>>> >>>>>> diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c >>>>>> index 47bc0a30c275..54c0a0fcd54d 100644 >>>>>> --- a/tools/testing/selftests/bpf/prog_tests/hid.c >>>>>> +++ b/tools/testing/selftests/bpf/prog_tests/hid.c >>>>>> @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { >>>>>> 0xc0, /* END_COLLECTION */ >>>>>> }; >>>>>> >>>>>> +static u8 feature_data[] = { 1, 2 }; >>>>>> + >>>>>> struct attach_prog_args { >>>>>> int prog_fd; >>>>>> unsigned int hid; >>>>>> int retval; >>>>>> }; >>>>>> >>>>>> +struct hid_hw_request_syscall_args { >>>>>> + __u8 data[10]; >>>>>> + unsigned int hid; >>>>>> + int retval; >>>>>> + size_t size; >>>>>> + enum hid_report_type type; >>>>>> + __u8 request_type; >>>>>> +}; >>>>>> + >>>>>> static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; >>>>>> static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; >>>>>> >>>>>> @@ -142,7 +153,7 @@ static void destroy(int fd) >>>>>> >>>>>> static int uhid_event(int fd) >>>>>> { >>>>>> - struct uhid_event ev; >>>>>> + struct uhid_event ev, answer; >>>>>> ssize_t ret; >>>>>> >>>>>> memset(&ev, 0, sizeof(ev)); >>>>>> @@ -183,6 +194,15 @@ static int uhid_event(int fd) >>>>>> break; >>>>>> case UHID_GET_REPORT: >>>>>> fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); >>>>>> + >>>>>> + answer.type = UHID_GET_REPORT_REPLY; >>>>>> + answer.u.get_report_reply.id = ev.u.get_report.id; >>>>>> + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; >>>>>> + answer.u.get_report_reply.size = sizeof(feature_data); >>>>>> + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); >>>>>> + >>>>>> + uhid_write(fd, &answer); >>>>>> + >>>>>> break; >>>>>> case UHID_SET_REPORT: >>>>>> fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); >>>>>> @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) >>>>>> struct test_params { >>>>>> struct hid *skel; >>>>>> int hidraw_fd; >>>>>> + int hid_id; >>>>>> }; >>>>>> >>>>>> static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) >>>>>> @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test >>>>>> if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) >>>>>> goto cleanup; >>>>>> >>>>>> - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); >>>>>> - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) >>>>>> - goto cleanup; >>>>>> + if (prog_name) { >>>>>> + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); >>>>>> + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) >>>>>> + goto cleanup; >>>>>> >>>>>> - bpf_program__set_autoload(prog, true); >>>>>> + bpf_program__set_autoload(prog, true); >>>>>> >>>>>> - err = hid__load(hid_skel); >>>>>> - if (!ASSERT_OK(err, "hid_skel_load")) >>>>>> - goto cleanup; >>>>>> + err = hid__load(hid_skel); >>>>>> + if (!ASSERT_OK(err, "hid_skel_load")) >>>>>> + goto cleanup; >>>>>> >>>>>> - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); >>>>>> - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { >>>>>> - err = attach_fd; >>>>>> - goto cleanup; >>>>>> - } >>>>>> + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); >>>>>> + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { >>>>>> + err = attach_fd; >>>>>> + goto cleanup; >>>>>> + } >>>>>> >>>>>> - args.prog_fd = bpf_program__fd(prog); >>>>>> - err = bpf_prog_test_run_opts(attach_fd, &tattr); >>>>>> - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); >>>>>> - if (!ASSERT_EQ(args.retval, 0, buf)) >>>>>> - goto cleanup; >>>>>> + args.prog_fd = bpf_program__fd(prog); >>>>>> + err = bpf_prog_test_run_opts(attach_fd, &tattr); >>>>>> + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); >>>>>> + if (!ASSERT_EQ(args.retval, 0, buf)) >>>>>> + goto cleanup; >>>>>> + } else { >>>>>> + err = hid__load(hid_skel); >>>>>> + if (!ASSERT_OK(err, "hid_skel_load")) >>>>>> + goto cleanup; >>>>>> + } >>>>>> >>>>>> hidraw_fd = open_hidraw(dev_id); >>>>>> if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) >>>>>> @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test >>>>>> >>>>>> test_data->skel = hid_skel; >>>>>> test_data->hidraw_fd = hidraw_fd; >>>>>> + test_data->hid_id = hid_id; >>>>>> >>>>>> return 0; >>>>>> >>>>>> @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) >>>>>> return ret; >>>>>> } >>>>>> >>>>>> +/* >>>>>> + * Attach hid_user_raw_request to the given uhid device, >>>>>> + * call the bpf program from userspace >>>>>> + * check that the program is called and does the expected. >>>>>> + */ >>>>>> +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) >>>>>> +{ >>>>>> + struct test_params params; >>>>>> + int err, prog_fd; >>>>>> + int ret = -1; >>>>>> + struct hid_hw_request_syscall_args args = { >>>>>> + .retval = -1, >>>>>> + .type = HID_FEATURE_REPORT, >>>>>> + .request_type = HID_REQ_GET_REPORT, >>>>>> + .size = 10, >>>>>> + }; >>>>>> + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, >>>>>> + .ctx_in = &args, >>>>>> + .ctx_size_in = sizeof(args), >>>>>> + ); >>>>>> + >>>>>> + err = prep_test(dev_id, NULL, ¶ms); >>>>>> + if (!ASSERT_EQ(err, 0, "prep_test()")) >>>>>> + goto cleanup; >>>>>> + >>>>>> + args.hid = params.hid_id; >>>>>> + args.data[0] = 1; /* report ID */ >>>>>> + >>>>>> + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); >>>>>> + >>>>>> + err = bpf_prog_test_run_opts(prog_fd, &tattrs); >>>>>> + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) >>>>>> + goto cleanup; >>>>>> + >>>>>> + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) >>>>>> + goto cleanup; >>>>>> + >>>>>> + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) >>>>>> + goto cleanup; >>>>>> + >>>>>> + ret = 0; >>>>>> + >>>>>> +cleanup: >>>>>> + cleanup_test(¶ms); >>>>>> + >>>>>> + return ret; >>>>>> +} >>>>>> + >>>>>> void serial_test_hid_bpf(void) >>>>>> { >>>>>> int err, uhid_fd; >>>>>> @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) >>>>>> ASSERT_OK(err, "hid_attach_detach"); >>>>>> err = test_hid_change_report(uhid_fd, dev_id); >>>>>> ASSERT_OK(err, "hid_change_report"); >>>>>> + err = test_hid_user_raw_request_call(uhid_fd, dev_id); >>>>>> + ASSERT_OK(err, "hid_change_report"); >>>>>> >>>>>> destroy(uhid_fd); >>>>>> >>>>>> diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c >>>>>> index ee7529c47ad8..e3444d444303 100644 >>>>>> --- a/tools/testing/selftests/bpf/progs/hid.c >>>>>> +++ b/tools/testing/selftests/bpf/progs/hid.c >>>>>> @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, >>>>>> unsigned int offset, >>>>>> const size_t __sz) __ksym; >>>>>> extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; >>>>>> +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; >>>>>> +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; >>>>>> +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, >>>>>> + __u8 *data, >>>>>> + size_t len, >>>>>> + enum hid_report_type type, >>>>>> + int reqtype) __ksym; >>>>>> >>>>>> struct attach_prog_args { >>>>>> int prog_fd; >>>>>> @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) >>>>>> 0); >>>>>> return 0; >>>>>> } >>>>>> + >>>>>> +struct hid_hw_request_syscall_args { >>>>>> + /* data needs to come at offset 0 so we can do a memcpy into it */ >>>>>> + __u8 data[10]; >>>>>> + unsigned int hid; >>>>>> + int retval; >>>>>> + size_t size; >>>>>> + enum hid_report_type type; >>>>>> + __u8 request_type; >>>>>> +}; >>>>>> + >>>>>> +SEC("syscall") >>>>>> +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) >>>>>> +{ >>>>>> + struct hid_bpf_ctx *ctx; >>>>>> + int i, ret = 0; >>>>>> + __u8 *data; >>>>>> + >>>>>> + ctx = hid_bpf_allocate_context(args->hid); >>>>>> + if (!ctx) >>>>>> + return 0; /* EPERM check */ >>>>>> + >>>>>> + /* We can not use the context data memory directly in the hid_bpf call, >>>>>> + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context >>>>>> + */ >>>>>> + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); >>>>>> + if (!data) >>>>>> + goto out; /* EPERM check */ >>>>>> + >>>>> >>>>> If I'm reading this right, you need more than just returning PTR_TO_MEM. Since >>>>> this points into allocated ctx, nothing prevents user from accessing data after >>>>> we do hid_bpf_release_context. >>>> >>>> oops. I missed that point. >>>> >>>> TBH, ideally I wanted to directly pass args->data into >>>> hid_bpf_hw_request(). But because args is seen as the context of the >>>> program, I can not pass it to the kfunc arguments. >>>> I would happily prevent getting a data pointer for a manually >>>> allocated context if I could solve that issue. This would save me from >>>> calling twice __builtin_memcpy. >>> >>> Oh, is that why you need to do this? So if you were able to pass args->data, you >>> wouldn't need this hid_bpf_get_data? kfunc does support taking PTR_TO_CTX (i.e. >>> args in your case), I am not sure why you're not passing it in directly then. >>> Did you encounter any errors when trying to do so? The only requirement is that >>> args offset must be 0 (i.e. passed as is without increment). >> >> With the following patch applied, the tests are failing: >> --- >> diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c >> index 43724fd26fb9..976fc8b83934 100644 >> --- a/tools/testing/selftests/bpf/progs/hid.c >> +++ b/tools/testing/selftests/bpf/progs/hid.c >> @@ -80,24 +80,14 @@ int hid_user_raw_request(struct hid_hw_request_syscall_args *args) >> { >> struct hid_bpf_ctx *ctx; >> int i, ret = 0; >> - __u8 *data; >> ctx = hid_bpf_allocate_context(args->hid); >> if (!ctx) >> return 0; /* EPERM check */ >> - /* We can not use the context data memory directly in the hid_bpf call, >> - * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context >> - */ >> - data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); >> - if (!data) >> - goto out; /* EPERM check */ >> - >> - __builtin_memcpy(data, args->data, sizeof(args->data)); >> - >> if (args->size <= sizeof(args->data)) { >> ret = hid_bpf_hw_request(ctx, >> - data, >> + args->data, >> args->size, >> args->type, >> args->request_type); >> @@ -109,8 +99,6 @@ int hid_user_raw_request(struct hid_hw_request_syscall_args *args) >> goto out; >> } >> - __builtin_memcpy(args->data, data, sizeof(args->data)); >> - >> out: >> hid_bpf_release_context(ctx); >> --- >> >> Output of the verifier: >> >> libbpf: prog 'hid_user_raw_request': BPF program load failed: Invalid argument >> libbpf: prog 'hid_user_raw_request': -- BEGIN PROG LOAD LOG -- >> R1 type=ctx expected=fp >> 0: R1=ctx(off=0,imm=0) R10=fp0 >> ; int hid_user_raw_request(struct hid_hw_request_syscall_args *args) >> 0: (bf) r7 = r1 ; R1=ctx(off=0,imm=0) R7_w=ctx(off=0,imm=0) >> ; ctx = hid_bpf_allocate_context(args->hid); >> 1: (61) r1 = *(u32 *)(r7 +12) ; R1_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R7_w=ctx(off=0,imm=0) >> ; ctx = hid_bpf_allocate_context(args->hid); >> 2: (85) call hid_bpf_allocate_context#66484 >> 3: (bf) r6 = r0 ; R0_w=ptr_or_null_hid_bpf_ctx(id=2,ref_obj_id=2,off=0,imm=0) R6_w=ptr_or_null_hid_bpf_ctx(id=2,ref_obj_id=2,off=0,imm=0) refs=2 >> 4: (b4) w8 = 0 ; R8_w=0 refs=2 >> ; if (!ctx) >> 5: (15) if r6 == 0x0 goto pc+12 ; R6_w=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) refs=2 >> 6: (b4) w8 = -7 ; R8_w=4294967289 refs=2 >> ; if (args->size <= sizeof(args->data)) { >> 7: (79) r3 = *(u64 *)(r7 +24) ; R3=scalar() R7=ctx(off=0,imm=0) refs=2 >> ; if (args->size <= sizeof(args->data)) { >> 8: (25) if r3 > 0xa goto pc+7 ; R3=scalar(umax=10,var_off=(0x0; 0xf)) refs=2 >> ; args->request_type); >> 9: (71) r5 = *(u8 *)(r7 +36) ; R5_w=scalar(umax=255,var_off=(0x0; 0xff)) R7=ctx(off=0,imm=0) refs=2 >> ; args->type, >> 10: (61) r4 = *(u32 *)(r7 +32) ; R4_w=scalar(umax=4294967295,var_off=(0x0; 0xffffffff)) R7=ctx(off=0,imm=0) refs=2 >> ; ret = hid_bpf_hw_request(ctx, >> 11: (bf) r1 = r6 ; R1_w=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) R6=ptr_hid_bpf_ctx(ref_obj_id=2,off=0,imm=0) refs=2 >> 12: (bf) r2 = r7 ; R2_w=ctx(off=0,imm=0) R7=ctx(off=0,imm=0) refs=2 >> 13: (85) call hid_bpf_hw_request#66480 >> R2 type=ctx expected=fp >> processed 14 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1 >> -- END PROG LOAD LOG -- >> >> Maybe I am wrongly declaring hid_bpf_hw_request()? >> > > Ah, I see. This is because current code does not handle syscall prog. We need to > teach bpf_get_prog_ctx_type to handle this case for BPF_PROG_TYPE_SYSCALL. We > can use the ctx size at verification time, we will have to ensure the size is > greater than or equal to the size of struct expected by hid_bpf_hw_request for > that arg. Currently the type of ctx is void * for syscall progs, which obviously > is indicating lack of known size of ctx at compile time. > > In your case, you have a pair of args that pass a certain size while expecting > ctx as data of some len. For these variable sized ctx, we should probably just > make kfunc define void *, len__ctx_sz (__ctx_sz suffix) pair of args. If it sees > void * as arg type and as ctx as pointer type, it tries to check if arguments > are set up like this. Probably only makes sense doing for syscall progs since > ctx is user supplied. You can look at existing handling for __sz suffix for > inspiration. > OK, so I think I understand now why it fails. Thanks. However, I'd like to not restrict the void * argument to a context, as users might want to simply statically allocate a buffer and use that. What if I do the following? (by changing return 0 to something meaningfull): --- diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 084319073064..8d5b47af0da5 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -5020,6 +5020,7 @@ static int check_helper_mem_access(struct bpf_verifier_env *env, int regno, struct bpf_call_arg_meta *meta) { struct bpf_reg_state *regs = cur_regs(env), *reg = ®s[regno]; + enum bpf_prog_type prog_type = resolve_prog_type(env->prog); u32 *max_access; switch (base_type(reg->type)) { @@ -5073,6 +5074,14 @@ static int check_helper_mem_access(struct bpf_verifier_env *env, int regno, env, regno, reg->off, access_size, zero_size_allowed, ACCESS_HELPER, meta); + case PTR_TO_CTX: + /* in case of type SYSCALL, the context is user supplied so + * not computed statically. + * Dynamically check it now + */ + if (prog_type == BPF_PROG_TYPE_SYSCALL) + return 0 /* some magic call to compare the access_size against the ctx size */; + fallthrough; default: /* scalar_value or invalid ptr */ /* Allow zero-byte read from NULL, regardless of pointer type */ if (zero_size_allowed && access_size == 0 && --- Would I be able to get access to the real CTX size there, and would that be acceptable? Cheers, Benjamin PS: I'll be out tomorrow and it's the end of the work day here, so I might not answer before next Monday >> Cheers, >> Benjamin >> >>> >>>> >>>> That doesn't change the fact that you are correct and the PTR_TO_MEM >>>> in kfunc code should be fixed. >>>> But right now, I am not sure what you mean below and I'll need a >>>> little bit more time to process it. >>>> >>>> Cheers, >>>> Benjamin >>>> >>>>> >>>>> The ref_obj_id of ctx needs to be transferred to R0.ref_obj_id, and R0.id needs >>>>> to be assigned another id distinct from the ref_obj_id. >>>>> >>>>> My idea would be to give this type of function a new set, and handle this case >>>>> of transferring ref_obj_id into R0. See is_ptr_cast_function in verifier.c. >>>>> Shouldn't be too much code. You could even use the bpf_kfunc_arg_meta to store >>>>> the ref_obj_id (and ensure only one referenced register exists among the 5 >>>>> arguments). >>>>> >>>>>> + __builtin_memcpy(data, args->data, sizeof(args->data)); >>>>>> + >>>>>> + if (args->size <= sizeof(args->data)) { >>>>>> + ret = hid_bpf_hw_request(ctx, >>>>>> + data, >>>>>> + args->size, >>>>>> + args->type, >>>>>> + args->request_type); >>>>>> + args->retval = ret; >>>>>> + if (ret < 0) >>>>>> + goto out; >>>>>> + } else { >>>>>> + ret = -7; /* -E2BIG */ >>>>>> + goto out; >>>>>> + } >>>>>> + >>>>>> + __builtin_memcpy(args->data, data, sizeof(args->data)); >>>>>> + >>>>>> + out: >>>>>> + hid_bpf_release_context(ctx); >>>>>> + >>>>>> + return ret; >>>>>> +} >>>>>> -- >>>>>> 2.36.1 >>>>>> >>>>> >>>>> -- >>>>> Kartikeya >>>>> >>>> >>> >>> -- >>> Kartikeya >>> >> > > -- > Kartikeya >
diff --git a/tools/testing/selftests/bpf/prog_tests/hid.c b/tools/testing/selftests/bpf/prog_tests/hid.c index 47bc0a30c275..54c0a0fcd54d 100644 --- a/tools/testing/selftests/bpf/prog_tests/hid.c +++ b/tools/testing/selftests/bpf/prog_tests/hid.c @@ -77,12 +77,23 @@ static unsigned char rdesc[] = { 0xc0, /* END_COLLECTION */ }; +static u8 feature_data[] = { 1, 2 }; + struct attach_prog_args { int prog_fd; unsigned int hid; int retval; }; +struct hid_hw_request_syscall_args { + __u8 data[10]; + unsigned int hid; + int retval; + size_t size; + enum hid_report_type type; + __u8 request_type; +}; + static pthread_mutex_t uhid_started_mtx = PTHREAD_MUTEX_INITIALIZER; static pthread_cond_t uhid_started = PTHREAD_COND_INITIALIZER; @@ -142,7 +153,7 @@ static void destroy(int fd) static int uhid_event(int fd) { - struct uhid_event ev; + struct uhid_event ev, answer; ssize_t ret; memset(&ev, 0, sizeof(ev)); @@ -183,6 +194,15 @@ static int uhid_event(int fd) break; case UHID_GET_REPORT: fprintf(stderr, "UHID_GET_REPORT from uhid-dev\n"); + + answer.type = UHID_GET_REPORT_REPLY; + answer.u.get_report_reply.id = ev.u.get_report.id; + answer.u.get_report_reply.err = ev.u.get_report.rnum == 1 ? 0 : -EIO; + answer.u.get_report_reply.size = sizeof(feature_data); + memcpy(answer.u.get_report_reply.data, feature_data, sizeof(feature_data)); + + uhid_write(fd, &answer); + break; case UHID_SET_REPORT: fprintf(stderr, "UHID_SET_REPORT from uhid-dev\n"); @@ -391,6 +411,7 @@ static int open_hidraw(int dev_id) struct test_params { struct hid *skel; int hidraw_fd; + int hid_id; }; static int prep_test(int dev_id, const char *prog_name, struct test_params *test_data) @@ -419,27 +440,33 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test if (!ASSERT_OK_PTR(hid_skel, "hid_skel_open")) goto cleanup; - prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); - if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) - goto cleanup; + if (prog_name) { + prog = bpf_object__find_program_by_name(*hid_skel->skeleton->obj, prog_name); + if (!ASSERT_OK_PTR(prog, "find_prog_by_name")) + goto cleanup; - bpf_program__set_autoload(prog, true); + bpf_program__set_autoload(prog, true); - err = hid__load(hid_skel); - if (!ASSERT_OK(err, "hid_skel_load")) - goto cleanup; + err = hid__load(hid_skel); + if (!ASSERT_OK(err, "hid_skel_load")) + goto cleanup; - attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); - if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { - err = attach_fd; - goto cleanup; - } + attach_fd = bpf_program__fd(hid_skel->progs.attach_prog); + if (!ASSERT_GE(attach_fd, 0, "locate attach_prog")) { + err = attach_fd; + goto cleanup; + } - args.prog_fd = bpf_program__fd(prog); - err = bpf_prog_test_run_opts(attach_fd, &tattr); - snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); - if (!ASSERT_EQ(args.retval, 0, buf)) - goto cleanup; + args.prog_fd = bpf_program__fd(prog); + err = bpf_prog_test_run_opts(attach_fd, &tattr); + snprintf(buf, sizeof(buf), "attach_hid(%s)", prog_name); + if (!ASSERT_EQ(args.retval, 0, buf)) + goto cleanup; + } else { + err = hid__load(hid_skel); + if (!ASSERT_OK(err, "hid_skel_load")) + goto cleanup; + } hidraw_fd = open_hidraw(dev_id); if (!ASSERT_GE(hidraw_fd, 0, "open_hidraw")) @@ -447,6 +474,7 @@ static int prep_test(int dev_id, const char *prog_name, struct test_params *test test_data->skel = hid_skel; test_data->hidraw_fd = hidraw_fd; + test_data->hid_id = hid_id; return 0; @@ -693,6 +721,54 @@ static int test_hid_change_report(int uhid_fd, int dev_id) return ret; } +/* + * Attach hid_user_raw_request to the given uhid device, + * call the bpf program from userspace + * check that the program is called and does the expected. + */ +static int test_hid_user_raw_request_call(int uhid_fd, int dev_id) +{ + struct test_params params; + int err, prog_fd; + int ret = -1; + struct hid_hw_request_syscall_args args = { + .retval = -1, + .type = HID_FEATURE_REPORT, + .request_type = HID_REQ_GET_REPORT, + .size = 10, + }; + DECLARE_LIBBPF_OPTS(bpf_test_run_opts, tattrs, + .ctx_in = &args, + .ctx_size_in = sizeof(args), + ); + + err = prep_test(dev_id, NULL, ¶ms); + if (!ASSERT_EQ(err, 0, "prep_test()")) + goto cleanup; + + args.hid = params.hid_id; + args.data[0] = 1; /* report ID */ + + prog_fd = bpf_program__fd(params.skel->progs.hid_user_raw_request); + + err = bpf_prog_test_run_opts(prog_fd, &tattrs); + if (!ASSERT_EQ(err, 0, "bpf_prog_test_run_opts")) + goto cleanup; + + if (!ASSERT_EQ(args.retval, 2, "bpf_prog_test_run_opts_retval")) + goto cleanup; + + if (!ASSERT_EQ(args.data[1], 2, "hid_user_raw_request_check_in")) + goto cleanup; + + ret = 0; + +cleanup: + cleanup_test(¶ms); + + return ret; +} + void serial_test_hid_bpf(void) { int err, uhid_fd; @@ -720,6 +796,8 @@ void serial_test_hid_bpf(void) ASSERT_OK(err, "hid_attach_detach"); err = test_hid_change_report(uhid_fd, dev_id); ASSERT_OK(err, "hid_change_report"); + err = test_hid_user_raw_request_call(uhid_fd, dev_id); + ASSERT_OK(err, "hid_change_report"); destroy(uhid_fd); diff --git a/tools/testing/selftests/bpf/progs/hid.c b/tools/testing/selftests/bpf/progs/hid.c index ee7529c47ad8..e3444d444303 100644 --- a/tools/testing/selftests/bpf/progs/hid.c +++ b/tools/testing/selftests/bpf/progs/hid.c @@ -10,6 +10,13 @@ extern __u8 *hid_bpf_get_data(struct hid_bpf_ctx *ctx, unsigned int offset, const size_t __sz) __ksym; extern int hid_bpf_attach_prog(unsigned int hid_id, int prog_fd, u32 flags) __ksym; +extern struct hid_bpf_ctx *hid_bpf_allocate_context(unsigned int hid_id) __ksym; +extern void hid_bpf_release_context(struct hid_bpf_ctx *ctx) __ksym; +extern int hid_bpf_hw_request(struct hid_bpf_ctx *ctx, + __u8 *data, + size_t len, + enum hid_report_type type, + int reqtype) __ksym; struct attach_prog_args { int prog_fd; @@ -56,3 +63,55 @@ int attach_prog(struct attach_prog_args *ctx) 0); return 0; } + +struct hid_hw_request_syscall_args { + /* data needs to come at offset 0 so we can do a memcpy into it */ + __u8 data[10]; + unsigned int hid; + int retval; + size_t size; + enum hid_report_type type; + __u8 request_type; +}; + +SEC("syscall") +int hid_user_raw_request(struct hid_hw_request_syscall_args *args) +{ + struct hid_bpf_ctx *ctx; + int i, ret = 0; + __u8 *data; + + ctx = hid_bpf_allocate_context(args->hid); + if (!ctx) + return 0; /* EPERM check */ + + /* We can not use the context data memory directly in the hid_bpf call, + * so we rely on the PTR_TO_MEM allocated in the hid_bpf_context + */ + data = hid_bpf_get_data(ctx, 0 /* offset */, 10 /* size */); + if (!data) + goto out; /* EPERM check */ + + __builtin_memcpy(data, args->data, sizeof(args->data)); + + if (args->size <= sizeof(args->data)) { + ret = hid_bpf_hw_request(ctx, + data, + args->size, + args->type, + args->request_type); + args->retval = ret; + if (ret < 0) + goto out; + } else { + ret = -7; /* -E2BIG */ + goto out; + } + + __builtin_memcpy(args->data, data, sizeof(args->data)); + + out: + hid_bpf_release_context(ctx); + + return ret; +}
Add tests for the newly implemented function. We test here only the GET_REPORT part because the other calls are pure HID protocol and won't infer the result of the test of the bpf hook. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> --- changes in v5: - use the new hid_bpf_allocate_context() API - remove the need for ctx_in for syscall TEST_RUN changes in v3: - use the new hid_get_data API - directly use HID_FEATURE_REPORT and HID_REQ_GET_REPORT from uapi changes in v2: - split the series by bpf/libbpf/hid/selftests and samples --- tools/testing/selftests/bpf/prog_tests/hid.c | 114 ++++++++++++++++--- tools/testing/selftests/bpf/progs/hid.c | 59 ++++++++++ 2 files changed, 155 insertions(+), 18 deletions(-)