Message ID | 20220524152552.246193-6-abailon@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Daniel Lezcano |
Headers | show |
Series | Add LVTS architecture thermal | expand |
Il 24/05/22 17:25, Alexandre Bailon ha scritto: > This adds the efuse node. This will be required by the thermal driver > to get the calibration data. > > Signed-off-by: Alexandre Bailon <abailon@baylibre.com> > --- > arch/arm64/boot/dts/mediatek/mt8195.dtsi | 17 +++++++++++++++++ > 1 file changed, 17 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > index 0011a8ba8f96..51443e83d906 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi > +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi > @@ -1238,6 +1238,23 @@ nor_flash: spi@1132c000 { > status = "disabled"; > }; > > + efuse: efuse@11c10000 { > + compatible = "mediatek,efuse"; > + reg = <0 0x11c10000 0 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + lvts_e_data1: data1 { lvts1-calib@1bc > + reg = <0x1bc 0x14>; > + }; > + lvts_e_data2: data1-1 { lvts2-calib@1d0 > + reg = <0x1d0 0x38>; > + }; > + svs_calibration: calib@580 { > + reg = <0x580 0x64>; > + }; > + }; > + > u3phy2: t-phy@11c40000 { > compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; > #address-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index 0011a8ba8f96..51443e83d906 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -1238,6 +1238,23 @@ nor_flash: spi@1132c000 { status = "disabled"; }; + efuse: efuse@11c10000 { + compatible = "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + lvts_e_data1: data1 { + reg = <0x1bc 0x14>; + }; + lvts_e_data2: data1-1 { + reg = <0x1d0 0x38>; + }; + svs_calibration: calib@580 { + reg = <0x580 0x64>; + }; + }; + u3phy2: t-phy@11c40000 { compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; #address-cells = <1>;
This adds the efuse node. This will be required by the thermal driver to get the calibration data. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)