Message ID | 20220524152159.2370739-1-Frank.Li@nxp.com (mailing list archive) |
---|---|
Headers | show |
Series | Enable designware PCI EP EDMA locally | expand |
Hello Vinod On Tue, May 24, 2022 at 10:21:51AM -0500, Frank Li wrote: > Default Designware EDMA just probe remotely at host side. > This patch allow EDMA driver can probe at EP side. > > 1. Clean up patch > dmaengine: dw-edma: Detach the private data and chip info structures > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > dmaengine: dw-edma: Change rg_region to reg_base in struct > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > 2. Enhance EDMA driver to allow prode eDMA at EP side > dmaengine: dw-edma: Add support for chip specific flags > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > flags (this patch removed at v11 because dma tree already have fixed > patch) > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > dmaengine: dw-edma: Fix programming the source & dest addresses for > ep > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > 4. change pci-epf-test to use EDMA driver to transfer data. > PCI: endpoint: Add embedded DMA controller test > > 5. Using imx8dxl to do test, but some EP functions still have not > upstream yet. So below patch show how probe eDMA driver at EP > controller driver. > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 This series has been on review for over three months now. It has got several acks, rb and tb tags from me, Manivannan and Kishon (the last patch in the series). Seeing Gustavo hasn't been active for all that time at all and hasn't performed any review for more than a year the probability of getting his attention soon enough is almost zero. Thus could you please give your acks if you are ok with the series content. Due to having several more patchsets dependent on this one, Bjorn has agreed to merge this series in through the PCI tree: https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ So the only thing we need is your ack tags. @Frank. Should there be a new patchset revision could you please add a request to merge the series in to the PCI tree? I am a bit tired repeating the same messages each time the new mailing review lap.) -Sergey > > Frank Li (6): > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > dmaengine: dw-edma: Detach the private data and chip info structures > dmaengine: dw-edma: Change rg_region to reg_base in struct > dw_edma_chip > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > dw_edma_chip > dmaengine: dw-edma: Add support for chip specific flags > PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities > > Serge Semin (2): > dmaengine: dw-edma: Drop dma_slave_config.direction field usage > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction > semantics > > drivers/dma/dw-edma/dw-edma-core.c | 141 +++++++++++------- > drivers/dma/dw-edma/dw-edma-core.h | 31 +--- > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------ > drivers/dma/dw-edma/dw-edma-v0-core.c | 41 ++--- > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +- > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 18 +-- > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 8 +- > drivers/pci/endpoint/functions/pci-epf-test.c | 112 ++++++++++++-- > include/linux/dma/edma.h | 59 +++++++- > 9 files changed, 317 insertions(+), 180 deletions(-) > > -- > 2.35.1 >
On Wed, May 25, 2022 at 4:23 AM Serge Semin <fancer.lancer@gmail.com> wrote: > > Hello Vinod > > On Tue, May 24, 2022 at 10:21:51AM -0500, Frank Li wrote: > > Default Designware EDMA just probe remotely at host side. > > This patch allow EDMA driver can probe at EP side. > > > > 1. Clean up patch > > dmaengine: dw-edma: Detach the private data and chip info structures > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > dmaengine: dw-edma: Add support for chip specific flags > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > flags (this patch removed at v11 because dma tree already have fixed > > patch) > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > ep > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > PCI: endpoint: Add embedded DMA controller test > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > upstream yet. So below patch show how probe eDMA driver at EP > > controller driver. > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > This series has been on review for over three months now. It has got > several acks, rb and tb tags from me, Manivannan and Kishon (the last > patch in the series). Seeing Gustavo hasn't been active for all that time > at all and hasn't performed any review for more than a year the > probability of getting his attention soon enough is almost zero. Thus > could you please give your acks if you are ok with the series content. Due > to having several more patchsets dependent on this one, Bjorn has agreed > to merge this series in through the PCI tree: > https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ > So the only thing we need is your ack tags. > > @Frank. Should there be a new patchset revision could you please add a > request to merge the series in to the PCI tree? I am a bit tired repeating > the same messages each time the new mailing review lap.) The key is to need Vinod to say something Best regards Frank Li. > > -Sergey > > > > > Frank Li (6): > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > dmaengine: dw-edma: Detach the private data and chip info structures > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > dw_edma_chip > > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > dw_edma_chip > > dmaengine: dw-edma: Add support for chip specific flags > > PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities > > > > Serge Semin (2): > > dmaengine: dw-edma: Drop dma_slave_config.direction field usage > > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction > > semantics > > > > drivers/dma/dw-edma/dw-edma-core.c | 141 +++++++++++------- > > drivers/dma/dw-edma/dw-edma-core.h | 31 +--- > > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------ > > drivers/dma/dw-edma/dw-edma-v0-core.c | 41 ++--- > > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +- > > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 18 +-- > > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 8 +- > > drivers/pci/endpoint/functions/pci-epf-test.c | 112 ++++++++++++-- > > include/linux/dma/edma.h | 59 +++++++- > > 9 files changed, 317 insertions(+), 180 deletions(-) > > > > -- > > 2.35.1 > >
On Wed, May 25, 2022 at 9:41 AM Zhi Li <lznuaa@gmail.com> wrote: > > On Wed, May 25, 2022 at 4:23 AM Serge Semin <fancer.lancer@gmail.com> wrote: > > > > Hello Vinod > > > > On Tue, May 24, 2022 at 10:21:51AM -0500, Frank Li wrote: > > > Default Designware EDMA just probe remotely at host side. > > > This patch allow EDMA driver can probe at EP side. > > > > > > 1. Clean up patch > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > dmaengine: dw-edma: Add support for chip specific flags > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > flags (this patch removed at v11 because dma tree already have fixed > > > patch) > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > ep > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > PCI: endpoint: Add embedded DMA controller test > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > upstream yet. So below patch show how probe eDMA driver at EP > > > controller driver. > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > This series has been on review for over three months now. It has got > > several acks, rb and tb tags from me, Manivannan and Kishon (the last > > patch in the series). Seeing Gustavo hasn't been active for all that time > > at all and hasn't performed any review for more than a year the > > probability of getting his attention soon enough is almost zero. Thus > > could you please give your acks if you are ok with the series content. Due > > to having several more patchsets dependent on this one, Bjorn has agreed > > to merge this series in through the PCI tree: > > https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ > > So the only thing we need is your ack tags. > > > > @Frank. Should there be a new patchset revision could you please add a > > request to merge the series in to the PCI tree? I am a bit tired repeating > > the same messages each time the new mailing review lap.) > > The key is to need Vinod to say something > > Best regards > Frank Li. @Vinod Kou: These patches were well reviewed by Serge Semin, Bjorn, Manivannan Sadhasivam, Kishon Vijay Abraham and tested on 3 platforms. Pending on your opinion because it touch file under /driver/dma/dw_edma/* best regards Frank Li > > > > > -Sergey > > > > > > > > Frank Li (6): > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > dw_edma_chip > > > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > dw_edma_chip > > > dmaengine: dw-edma: Add support for chip specific flags > > > PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities > > > > > > Serge Semin (2): > > > dmaengine: dw-edma: Drop dma_slave_config.direction field usage > > > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction > > > semantics > > > > > > drivers/dma/dw-edma/dw-edma-core.c | 141 +++++++++++------- > > > drivers/dma/dw-edma/dw-edma-core.h | 31 +--- > > > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------ > > > drivers/dma/dw-edma/dw-edma-v0-core.c | 41 ++--- > > > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +- > > > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 18 +-- > > > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 8 +- > > > drivers/pci/endpoint/functions/pci-epf-test.c | 112 ++++++++++++-- > > > include/linux/dma/edma.h | 59 +++++++- > > > 9 files changed, 317 insertions(+), 180 deletions(-) > > > > > > -- > > > 2.35.1 > > >
On Tue, May 31, 2022 at 9:02 AM Zhi Li <lznuaa@gmail.com> wrote: > > On Wed, May 25, 2022 at 9:41 AM Zhi Li <lznuaa@gmail.com> wrote: > > > > On Wed, May 25, 2022 at 4:23 AM Serge Semin <fancer.lancer@gmail.com> wrote: > > > > > > Hello Vinod > > > > > > On Tue, May 24, 2022 at 10:21:51AM -0500, Frank Li wrote: > > > > Default Designware EDMA just probe remotely at host side. > > > > This patch allow EDMA driver can probe at EP side. > > > > > > > > 1. Clean up patch > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > > flags (this patch removed at v11 because dma tree already have fixed > > > > patch) > > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > > ep > > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > > PCI: endpoint: Add embedded DMA controller test > > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > > upstream yet. So below patch show how probe eDMA driver at EP > > > > controller driver. > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > > This series has been on review for over three months now. It has got > > > several acks, rb and tb tags from me, Manivannan and Kishon (the last > > > patch in the series). Seeing Gustavo hasn't been active for all that time > > > at all and hasn't performed any review for more than a year the > > > probability of getting his attention soon enough is almost zero. Thus > > > could you please give your acks if you are ok with the series content. Due > > > to having several more patchsets dependent on this one, Bjorn has agreed > > > to merge this series in through the PCI tree: > > > https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ > > > So the only thing we need is your ack tags. > > > > > > @Frank. Should there be a new patchset revision could you please add a > > > request to merge the series in to the PCI tree? I am a bit tired repeating > > > the same messages each time the new mailing review lap.) > > > > The key is to need Vinod to say something > > > > Best regards > > Frank Li. > > @Vinod Kou: > These patches were well reviewed by Serge Semin, Bjorn, > Manivannan Sadhasivam, Kishon Vijay Abraham and tested on 3 platforms. > Pending on your opinion because it touch file under /driver/dma/dw_edma/* @vinod kou: friendly ping. > > best regards > Frank Li > > > > > > > > > -Sergey > > > > > > > > > > > Frank Li (6): > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > dw_edma_chip > > > > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > dw_edma_chip > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities > > > > > > > > Serge Semin (2): > > > > dmaengine: dw-edma: Drop dma_slave_config.direction field usage > > > > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction > > > > semantics > > > > > > > > drivers/dma/dw-edma/dw-edma-core.c | 141 +++++++++++------- > > > > drivers/dma/dw-edma/dw-edma-core.h | 31 +--- > > > > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------ > > > > drivers/dma/dw-edma/dw-edma-v0-core.c | 41 ++--- > > > > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +- > > > > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 18 +-- > > > > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 8 +- > > > > drivers/pci/endpoint/functions/pci-epf-test.c | 112 ++++++++++++-- > > > > include/linux/dma/edma.h | 59 +++++++- > > > > 9 files changed, 317 insertions(+), 180 deletions(-) > > > > > > > > -- > > > > 2.35.1 > > > >
On 24-05-22, 10:21, Frank Li wrote: > Default Designware EDMA just probe remotely at host side. > This patch allow EDMA driver can probe at EP side. > > 1. Clean up patch > dmaengine: dw-edma: Detach the private data and chip info structures > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > dmaengine: dw-edma: Change rg_region to reg_base in struct > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > 2. Enhance EDMA driver to allow prode eDMA at EP side > dmaengine: dw-edma: Add support for chip specific flags > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > flags (this patch removed at v11 because dma tree already have fixed > patch) > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > dmaengine: dw-edma: Fix programming the source & dest addresses for > ep > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > 4. change pci-epf-test to use EDMA driver to transfer data. > PCI: endpoint: Add embedded DMA controller test > > 5. Using imx8dxl to do test, but some EP functions still have not > upstream yet. So below patch show how probe eDMA driver at EP > controller driver. > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 Applied to dmaengine-next, thanks
On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > On 24-05-22, 10:21, Frank Li wrote: > > Default Designware EDMA just probe remotely at host side. > > This patch allow EDMA driver can probe at EP side. > > > > 1. Clean up patch > > dmaengine: dw-edma: Detach the private data and chip info structures > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > dmaengine: dw-edma: Add support for chip specific flags > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > flags (this patch removed at v11 because dma tree already have fixed > > patch) > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > ep > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > PCI: endpoint: Add embedded DMA controller test > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > upstream yet. So below patch show how probe eDMA driver at EP > > controller driver. > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > Applied to dmaengine-next, thanks Vinoud, this was supposed to be merged in through PCIe repo.( I asked many times of that. Bjorn also agreed to merge it in. Could drop it from yout repo? -Sergey > > -- > ~Vinod
On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote: > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > > On 24-05-22, 10:21, Frank Li wrote: > > > Default Designware EDMA just probe remotely at host side. > > > This patch allow EDMA driver can probe at EP side. > > > > > > 1. Clean up patch > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > dmaengine: dw-edma: Add support for chip specific flags > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > flags (this patch removed at v11 because dma tree already have fixed > > > patch) > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > ep > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > PCI: endpoint: Add embedded DMA controller test > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > upstream yet. So below patch show how probe eDMA driver at EP > > > controller driver. > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > Applied to dmaengine-next, thanks > > Vinod, this was supposed to be merged in through PCIe repo.( I asked > many times of that. Bjorn also agreed to merge it in. Could drop it > from yout repo? I asked it several time including in the framework of this thread: https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/ There are dependencies of my patchsets from this one. Please consider dropping it from your dmaengine-next repo while it's still possible since taking DW eDMA and PCie patches through the PCie repo would be more natural. -Sergey > > -Sergey > > > > > -- > > ~Vinod
On Thu, Jun 16, 2022 at 05:02:00PM +0300, Serge Semin wrote: > On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote: > > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > > > On 24-05-22, 10:21, Frank Li wrote: > > > > Default Designware EDMA just probe remotely at host side. > > > > This patch allow EDMA driver can probe at EP side. > > > > > > > > 1. Clean up patch > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > > flags (this patch removed at v11 because dma tree already have fixed > > > > patch) > > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > > ep > > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > > PCI: endpoint: Add embedded DMA controller test > > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > > upstream yet. So below patch show how probe eDMA driver at EP > > > > controller driver. > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > > > > Applied to dmaengine-next, thanks > > > > > Vinod, this was supposed to be merged in through PCIe repo.( I asked > > many times of that. Bjorn also agreed to merge it in. Could drop it > > from yout repo? > > I asked it several time including in the framework of this thread: > https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/ > There are dependencies of my patchsets from this one. Please consider > dropping it from your dmaengine-next repo while it's still possible > since taking DW eDMA and PCie patches through the PCie repo would be > more natural. The only thing we were waiting for was you ack tag... -Sergey > > -Sergey > > > > > -Sergey > > > > > > > > -- > > > ~Vinod
On 16-06-22, 17:03, Serge Semin wrote: > On Thu, Jun 16, 2022 at 05:02:00PM +0300, Serge Semin wrote: > > On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote: > > > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > > > > On 24-05-22, 10:21, Frank Li wrote: > > > > > Default Designware EDMA just probe remotely at host side. > > > > > This patch allow EDMA driver can probe at EP side. > > > > > > > > > > 1. Clean up patch > > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > > > flags (this patch removed at v11 because dma tree already have fixed > > > > > patch) > > > > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > > > ep > > > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > > > PCI: endpoint: Add embedded DMA controller test > > > > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > > > upstream yet. So below patch show how probe eDMA driver at EP > > > > > controller driver. > > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > > > > > > > Applied to dmaengine-next, thanks > > > > > > > > Vinod, this was supposed to be merged in through PCIe repo.( I asked > > > many times of that. Bjorn also agreed to merge it in. Could drop it > > > from yout repo? > > > > > I asked it several time including in the framework of this thread: > > https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/ > > There are dependencies of my patchsets from this one. Please consider > > dropping it from your dmaengine-next repo while it's still possible > > since taking DW eDMA and PCie patches through the PCie repo would be > > more natural. > > The only thing we were waiting for was you ack tag... Is there any dependency, since this has many dmaengine patches and one pcie patch which was acked by Kishon, so can go thru dmaengine tree... I can drop if that suits all...
On Thu, Jun 16, 2022 at 07:30:23AM -0700, Vinod Koul wrote: > On 16-06-22, 17:03, Serge Semin wrote: > > On Thu, Jun 16, 2022 at 05:02:00PM +0300, Serge Semin wrote: > > > On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote: > > > > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > > > > > On 24-05-22, 10:21, Frank Li wrote: > > > > > > Default Designware EDMA just probe remotely at host side. > > > > > > This patch allow EDMA driver can probe at EP side. > > > > > > > > > > > > 1. Clean up patch > > > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > > > > flags (this patch removed at v11 because dma tree already have fixed > > > > > > patch) > > > > > > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > > > > ep > > > > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > > > > PCI: endpoint: Add embedded DMA controller test > > > > > > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > > > > upstream yet. So below patch show how probe eDMA driver at EP > > > > > > controller driver. > > > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > > > > > > > > > > Applied to dmaengine-next, thanks > > > > > > > > > > > Vinod, this was supposed to be merged in through PCIe repo.( I asked > > > > many times of that. Bjorn also agreed to merge it in. Could drop it > > > > from yout repo? > > > > > > > > I asked it several time including in the framework of this thread: > > > https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/ > > > There are dependencies of my patchsets from this one. Please consider > > > dropping it from your dmaengine-next repo while it's still possible > > > since taking DW eDMA and PCie patches through the PCie repo would be > > > more natural. > > > > The only thing we were waiting for was you ack tag... > > Is there any dependency, since this has many dmaengine patches and one > pcie patch which was acked by Kishon, so can go thru dmaengine tree... Right. This one is fully suitable for the DMA-engine tree, but there are dependencies of my work from this series. My patchsets in its turn concern both PCIe and DMA-engine parts. Here is the deal. My work consists of four patchsets: [PATCH v4 00/18] PCI: dwc: Various fixes and cleanups https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@baikalelectronics.ru/ [PATCH v3 00/15] PCI: dwc: Add hw version and dma-ranges support https://lore.kernel.org/linux-pci/20220610084444.14549-1-Sergey.Semin@baikalelectronics.ru/ [PATCH v3 00/17] PCI: dwc: Add generic resources and Baikal-T1 support https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@baikalelectronics.ru/ [PATCH v3 00/24] dmaengine: dw-edma: Add RP/EP local DMA controllers support https://lore.kernel.org/dmaengine/20220610091459.17612-1-Sergey.Semin@baikalelectronics.ru/ The last patchset depends on the Frank series and my DW PCIe patchsets listed above. To cut it shortly here is the dependencies graph: PCIe RP/EP | DMA engine ^ | ^ | | | 1. Semin: [PATCH v4 00/18] "PCI: dwc: | | Various fixes and cleanups" | | ^ | | | | | 2. Semin: [PATCH v3 00/15] "PCI: dwc: | | Add hw version and dma-ranges | | support" | | ^ | | | | | 3. Semin: [PATCH v3 00/17] "PCI: dwc: | 4. Li: [PATCH v12 0/8] "Enable Add generic resources and Baikal-T1| designware PCI EP EDMA locally" support" | ^ ^ | | | +-----------------+-------------------+ | 5. Semin: [PATCH v3 00/24] "dmaengine: dw-edma: Add RP/EP local DMA controllers support" As you can see my series (5) depends on the Frank' series (4). My series in its turn depends on the PCI patchsets (3), (2) and (1). So if you get to merge the Frank' patchset into your tree we'll need to merge the rest of the patchsets through your repo too. Seeing the DW eDMA device is implemented as either a separate PCIe device or embedded into the DW PCIe RP/EP controller and there are many PCI-related patches in my work, it would be more suitable to merge all the patches through the PCIe tree. Bjorn already agreed to do that here: https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ We only waited for your ackes. BTW should you have some free time please review my series (5) too since it mainly concerns the DW eDMA driver (though Mani, in Cc, has already done it and even performed the testing). > > I can drop if that suits all... Yes please. Please drop the Frank' series from your repo, give your explicit ack if you are ok with it and let's merge it and the rest of the work through the Bjorn' repo. Patchset (1) has been fully reviewed. Series (2) and (3) need one more iteration to be finished. So I very much hope they will be done in the next few weeks, before the next merge window. -Sergey > > -- > ~Vinod
On 16-06-22, 18:20, Serge Semin wrote: > On Thu, Jun 16, 2022 at 07:30:23AM -0700, Vinod Koul wrote: > > On 16-06-22, 17:03, Serge Semin wrote: > > > On Thu, Jun 16, 2022 at 05:02:00PM +0300, Serge Semin wrote: > > > > On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote: > > > > > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > > > > > > On 24-05-22, 10:21, Frank Li wrote: > > > > > > > Default Designware EDMA just probe remotely at host side. > > > > > > > This patch allow EDMA driver can probe at EP side. > > > > > > > > > > > > > > 1. Clean up patch > > > > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > > > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > > > > > flags (this patch removed at v11 because dma tree already have fixed > > > > > > > patch) > > > > > > > > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > > > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > > > > > ep > > > > > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > > > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > > > > > PCI: endpoint: Add embedded DMA controller test > > > > > > > > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > > > > > upstream yet. So below patch show how probe eDMA driver at EP > > > > > > > controller driver. > > > > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > > > > > > > > > > > > > Applied to dmaengine-next, thanks > > > > > > > > > > > > > > Vinod, this was supposed to be merged in through PCIe repo.( I asked > > > > > many times of that. Bjorn also agreed to merge it in. Could drop it > > > > > from yout repo? > > > > > > > > > > > I asked it several time including in the framework of this thread: > > > > https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/ > > > > There are dependencies of my patchsets from this one. Please consider > > > > dropping it from your dmaengine-next repo while it's still possible > > > > since taking DW eDMA and PCie patches through the PCie repo would be > > > > more natural. > > > > > > The only thing we were waiting for was you ack tag... > > > > > Is there any dependency, since this has many dmaengine patches and one > > pcie patch which was acked by Kishon, so can go thru dmaengine tree... > > Right. This one is fully suitable for the DMA-engine tree, but there > are dependencies of my work from this series. My patchsets in its turn > concern both PCIe and DMA-engine parts. > > Here is the deal. My work consists of four patchsets: > [PATCH v4 00/18] PCI: dwc: Various fixes and cleanups > https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@baikalelectronics.ru/ > [PATCH v3 00/15] PCI: dwc: Add hw version and dma-ranges support > https://lore.kernel.org/linux-pci/20220610084444.14549-1-Sergey.Semin@baikalelectronics.ru/ > [PATCH v3 00/17] PCI: dwc: Add generic resources and Baikal-T1 support > https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@baikalelectronics.ru/ > [PATCH v3 00/24] dmaengine: dw-edma: Add RP/EP local DMA controllers support > https://lore.kernel.org/dmaengine/20220610091459.17612-1-Sergey.Semin@baikalelectronics.ru/ > > The last patchset depends on the Frank series and my DW PCIe > patchsets listed above. To cut it shortly here is the > dependencies graph: > > PCIe RP/EP | DMA engine > ^ | ^ > | | | > 1. Semin: [PATCH v4 00/18] "PCI: dwc: | | > Various fixes and cleanups" | | > ^ | | > | | | > 2. Semin: [PATCH v3 00/15] "PCI: dwc: | | > Add hw version and dma-ranges | | > support" | | > ^ | | > | | | > 3. Semin: [PATCH v3 00/17] "PCI: dwc: | 4. Li: [PATCH v12 0/8] "Enable > Add generic resources and Baikal-T1| designware PCI EP EDMA locally" > support" | ^ > ^ | > | | > +-----------------+-------------------+ > | > 5. Semin: [PATCH v3 00/24] "dmaengine: dw-edma: > Add RP/EP local DMA controllers support" > > As you can see my series (5) depends on the Frank' series (4). My series > in its turn depends on the PCI patchsets (3), (2) and (1). So if you get > to merge the Frank' patchset into your tree we'll need to merge the > rest of the patchsets through your repo too. Seeing the DW eDMA device > is implemented as either a separate PCIe device or embedded into the > DW PCIe RP/EP controller and there are many PCI-related patches in my > work, it would be more suitable to merge all the patches through the > PCIe tree. Bjorn already agreed to do that here: > https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ > We only waited for your ackes. BTW should you have some free time > please review my series (5) too since it mainly concerns the DW eDMA > driver (though Mani, in Cc, has already done it and even performed > the testing). > > > > > I can drop if that suits all... > > Yes please. Please drop the Frank' series from your repo, give your > explicit ack if you are ok with it and let's merge it and the rest of > the work through the Bjorn' repo. Patchset (1) has been fully reviewed. > Series (2) and (3) need one more iteration to be finished. So I very > much hope they will be done in the next few weeks, before the next > merge window. Ok dropped now
On 24-05-22, 10:21, Frank Li wrote: > Default Designware EDMA just probe remotely at host side. > This patch allow EDMA driver can probe at EP side. > > 1. Clean up patch > dmaengine: dw-edma: Detach the private data and chip info structures > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > dmaengine: dw-edma: Change rg_region to reg_base in struct > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > 2. Enhance EDMA driver to allow prode eDMA at EP side > dmaengine: dw-edma: Add support for chip specific flags > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > flags (this patch removed at v11 because dma tree already have fixed > patch) > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > dmaengine: dw-edma: Fix programming the source & dest addresses for > ep > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > 4. change pci-epf-test to use EDMA driver to transfer data. > PCI: endpoint: Add embedded DMA controller test > > 5. Using imx8dxl to do test, but some EP functions still have not > upstream yet. So below patch show how probe eDMA driver at EP > controller driver. > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 Acked-By: Vinod Koul <vkoul@kernel.org>
On Tue, May 24, 2022 at 10:21:51AM -0500, Frank Li wrote: > Default Designware EDMA just probe remotely at host side. > This patch allow EDMA driver can probe at EP side. > > 1. Clean up patch > dmaengine: dw-edma: Detach the private data and chip info structures > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > dmaengine: dw-edma: Change rg_region to reg_base in struct > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > 2. Enhance EDMA driver to allow prode eDMA at EP side > dmaengine: dw-edma: Add support for chip specific flags > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > flags (this patch removed at v11 because dma tree already have fixed > patch) > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > dmaengine: dw-edma: Fix programming the source & dest addresses for > ep > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > 4. change pci-epf-test to use EDMA driver to transfer data. > PCI: endpoint: Add embedded DMA controller test > > 5. Using imx8dxl to do test, but some EP functions still have not > upstream yet. So below patch show how probe eDMA driver at EP > controller driver. > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > Frank Li (6): > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > dmaengine: dw-edma: Detach the private data and chip info structures > dmaengine: dw-edma: Change rg_region to reg_base in struct > dw_edma_chip > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > dw_edma_chip > dmaengine: dw-edma: Add support for chip specific flags > PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities > > Serge Semin (2): > dmaengine: dw-edma: Drop dma_slave_config.direction field usage > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction > semantics > > drivers/dma/dw-edma/dw-edma-core.c | 141 +++++++++++------- > drivers/dma/dw-edma/dw-edma-core.h | 31 +--- > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------ > drivers/dma/dw-edma/dw-edma-v0-core.c | 41 ++--- > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +- > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 18 +-- > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 8 +- > drivers/pci/endpoint/functions/pci-epf-test.c | 112 ++++++++++++-- > include/linux/dma/edma.h | 59 +++++++- > 9 files changed, 317 insertions(+), 180 deletions(-) Applied with Vinod's ack to pci/edma for v5.20, thanks! Check https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/edma (head 7871514c9cff ("PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities")). If you post things that need to be applied on top of that branch, please mention that in the cover letter. I don't guarantee the immutability of the branch because sometimes I fix typos or similar errors before the merge window. Bjorn
On Thu, Jun 16, 2022 at 08:40:41AM -0700, Vinod Koul wrote: > On 16-06-22, 18:20, Serge Semin wrote: > > On Thu, Jun 16, 2022 at 07:30:23AM -0700, Vinod Koul wrote: > > > On 16-06-22, 17:03, Serge Semin wrote: > > > > On Thu, Jun 16, 2022 at 05:02:00PM +0300, Serge Semin wrote: > > > > > On Thu, Jun 16, 2022 at 04:54:13PM +0300, Serge Semin wrote: > > > > > > On Thu, Jun 16, 2022 at 06:51:55AM -0700, Vinod Koul wrote: > > > > > > > On 24-05-22, 10:21, Frank Li wrote: > > > > > > > > Default Designware EDMA just probe remotely at host side. > > > > > > > > This patch allow EDMA driver can probe at EP side. > > > > > > > > > > > > > > > > 1. Clean up patch > > > > > > > > dmaengine: dw-edma: Detach the private data and chip info structures > > > > > > > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > > > > > > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > > > > > > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > > > > > > > > > > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > > > > > > > dmaengine: dw-edma: Add support for chip specific flags > > > > > > > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > > > > > > > flags (this patch removed at v11 because dma tree already have fixed > > > > > > > > patch) > > > > > > > > > > > > > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > > > > > > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > > > > > > > ep > > > > > > > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > > > > > > > > > > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > > > > > > > PCI: endpoint: Add embedded DMA controller test > > > > > > > > > > > > > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > > > > > > > upstream yet. So below patch show how probe eDMA driver at EP > > > > > > > > controller driver. > > > > > > > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > > > > > > > > > > > > > > > > > Applied to dmaengine-next, thanks > > > > > > > > > > > > > > > > > Vinod, this was supposed to be merged in through PCIe repo.( I asked > > > > > > many times of that. Bjorn also agreed to merge it in. Could drop it > > > > > > from yout repo? > > > > > > > > > > > > > > I asked it several time including in the framework of this thread: > > > > > https://lore.kernel.org/dmaengine/20220525092306.wuansog6fe2ika3b@mobilestation/ > > > > > There are dependencies of my patchsets from this one. Please consider > > > > > dropping it from your dmaengine-next repo while it's still possible > > > > > since taking DW eDMA and PCie patches through the PCie repo would be > > > > > more natural. > > > > > > > > The only thing we were waiting for was you ack tag... > > > > > > > > Is there any dependency, since this has many dmaengine patches and one > > > pcie patch which was acked by Kishon, so can go thru dmaengine tree... > > > > Right. This one is fully suitable for the DMA-engine tree, but there > > are dependencies of my work from this series. My patchsets in its turn > > concern both PCIe and DMA-engine parts. > > > > Here is the deal. My work consists of four patchsets: > > [PATCH v4 00/18] PCI: dwc: Various fixes and cleanups > > https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@baikalelectronics.ru/ > > [PATCH v3 00/15] PCI: dwc: Add hw version and dma-ranges support > > https://lore.kernel.org/linux-pci/20220610084444.14549-1-Sergey.Semin@baikalelectronics.ru/ > > [PATCH v3 00/17] PCI: dwc: Add generic resources and Baikal-T1 support > > https://lore.kernel.org/linux-pci/20220610085706.15741-1-Sergey.Semin@baikalelectronics.ru/ > > [PATCH v3 00/24] dmaengine: dw-edma: Add RP/EP local DMA controllers support > > https://lore.kernel.org/dmaengine/20220610091459.17612-1-Sergey.Semin@baikalelectronics.ru/ > > > > The last patchset depends on the Frank series and my DW PCIe > > patchsets listed above. To cut it shortly here is the > > dependencies graph: > > > > PCIe RP/EP | DMA engine > > ^ | ^ > > | | | > > 1. Semin: [PATCH v4 00/18] "PCI: dwc: | | > > Various fixes and cleanups" | | > > ^ | | > > | | | > > 2. Semin: [PATCH v3 00/15] "PCI: dwc: | | > > Add hw version and dma-ranges | | > > support" | | > > ^ | | > > | | | > > 3. Semin: [PATCH v3 00/17] "PCI: dwc: | 4. Li: [PATCH v12 0/8] "Enable > > Add generic resources and Baikal-T1| designware PCI EP EDMA locally" > > support" | ^ > > ^ | > > | | > > +-----------------+-------------------+ > > | > > 5. Semin: [PATCH v3 00/24] "dmaengine: dw-edma: > > Add RP/EP local DMA controllers support" > > > > As you can see my series (5) depends on the Frank' series (4). My series > > in its turn depends on the PCI patchsets (3), (2) and (1). So if you get > > to merge the Frank' patchset into your tree we'll need to merge the > > rest of the patchsets through your repo too. Seeing the DW eDMA device > > is implemented as either a separate PCIe device or embedded into the > > DW PCIe RP/EP controller and there are many PCI-related patches in my > > work, it would be more suitable to merge all the patches through the > > PCIe tree. Bjorn already agreed to do that here: > > https://lore.kernel.org/linux-pci/20220524155201.GA247821@bhelgaas/ > > We only waited for your ackes. BTW should you have some free time > > please review my series (5) too since it mainly concerns the DW eDMA > > driver (though Mani, in Cc, has already done it and even performed > > the testing). > > > > > > > > I can drop if that suits all... > > > > Yes please. Please drop the Frank' series from your repo, give your > > explicit ack if you are ok with it and let's merge it and the rest of > > the work through the Bjorn' repo. Patchset (1) has been fully reviewed. > > Series (2) and (3) need one more iteration to be finished. So I very > > much hope they will be done in the next few weeks, before the next > > merge window. > > Ok dropped now Great! Thank you very much. Bjord has just merged in the series through his repo. -Sergey > > -- > ~Vinod
On Thu, Jun 16, 2022 at 11:35:33AM -0500, Bjorn Helgaas wrote: > On Tue, May 24, 2022 at 10:21:51AM -0500, Frank Li wrote: > > Default Designware EDMA just probe remotely at host side. > > This patch allow EDMA driver can probe at EP side. > > > > 1. Clean up patch > > dmaengine: dw-edma: Detach the private data and chip info structures > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > dmaengine: dw-edma: rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > > > 2. Enhance EDMA driver to allow prode eDMA at EP side > > dmaengine: dw-edma: Add support for chip specific flags > > dmaengine: dw-edma: Add DW_EDMA_CHIP_32BIT_DBI for chip specific > > flags (this patch removed at v11 because dma tree already have fixed > > patch) > > > > 3. Bugs fix at EDMA driver when probe eDMA at EP side > > dmaengine: dw-edma: Fix programming the source & dest addresses for > > ep > > dmaengine: dw-edma: Don't rely on the deprecated "direction" member > > > > 4. change pci-epf-test to use EDMA driver to transfer data. > > PCI: endpoint: Add embedded DMA controller test > > > > 5. Using imx8dxl to do test, but some EP functions still have not > > upstream yet. So below patch show how probe eDMA driver at EP > > controller driver. > > https://lore.kernel.org/linux-pci/20220309120149.GB134091@thinkpad/T/#m979eb506c73ab3cfca2e7a43635ecdaec18d8097 > > > > Frank Li (6): > > dmaengine: dw-edma: Remove unused field irq in struct dw_edma_chip > > dmaengine: dw-edma: Detach the private data and chip info structures > > dmaengine: dw-edma: Change rg_region to reg_base in struct > > dw_edma_chip > > dmaengine: dw-edma: Rename wr(rd)_ch_cnt to ll_wr(rd)_cnt in struct > > dw_edma_chip > > dmaengine: dw-edma: Add support for chip specific flags > > PCI: endpoint: Enable DMA tests for endpoints with DMA capabilities > > > > Serge Semin (2): > > dmaengine: dw-edma: Drop dma_slave_config.direction field usage > > dmaengine: dw-edma: Fix eDMA Rd/Wr-channels and DMA-direction > > semantics > > > > drivers/dma/dw-edma/dw-edma-core.c | 141 +++++++++++------- > > drivers/dma/dw-edma/dw-edma-core.h | 31 +--- > > drivers/dma/dw-edma/dw-edma-pcie.c | 83 +++++------ > > drivers/dma/dw-edma/dw-edma-v0-core.c | 41 ++--- > > drivers/dma/dw-edma/dw-edma-v0-core.h | 4 +- > > drivers/dma/dw-edma/dw-edma-v0-debugfs.c | 18 +-- > > drivers/dma/dw-edma/dw-edma-v0-debugfs.h | 8 +- > > drivers/pci/endpoint/functions/pci-epf-test.c | 112 ++++++++++++-- > > include/linux/dma/edma.h | 59 +++++++- > > 9 files changed, 317 insertions(+), 180 deletions(-) > > Applied with Vinod's ack to pci/edma for v5.20, thanks! > > Check > https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/edma > (head 7871514c9cff ("PCI: endpoint: Enable DMA tests for endpoints > with DMA capabilities")). Great! Just what we needed. > > If you post things that need to be applied on top of that branch, > please mention that in the cover letter. Ok. I'll mention that in the cover letters of my patchsets. I've already got several R-b/T-b tags in the series: https://lore.kernel.org/linux-pci/20220610082535.12802-1-Sergey.Semin@baikalelectronics.ru/ Could you also have a look at it? If no objection we can either merge it in right away into the pci/edma branch or wait for a little while for a few more rc-cycles until I get to fix all the comments posted for the dependant patchsets. > > I don't guarantee the immutability of the branch because sometimes I > fix typos or similar errors before the merge window. Got it. -Sergey > > Bjorn