@@ -701,6 +701,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
u8 *buf, trimming_bits, trimming_mask, upper_adc_val;
+ struct device *dev = indio_dev->dev.parent;
struct nvmem_cell *temperature_calib;
size_t read_len;
int ret;
@@ -717,30 +718,22 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
if (ret == -ENODEV)
return 0;
- return dev_err_probe(indio_dev->dev.parent, ret,
- "failed to get temperature_calib cell\n");
+ return dev_err_probe(dev, ret, "failed to get temperature_calib cell\n");
}
priv->tsc_regmap =
syscon_regmap_lookup_by_phandle(indio_dev->dev.parent->of_node,
"amlogic,hhi-sysctrl");
- if (IS_ERR(priv->tsc_regmap)) {
- dev_err(indio_dev->dev.parent,
- "failed to get amlogic,hhi-sysctrl regmap\n");
- return PTR_ERR(priv->tsc_regmap);
- }
+ if (IS_ERR(priv->tsc_regmap))
+ return dev_err_probe(dev, PTR_ERR(priv->tsc_regmap), "failed to get amlogic,hhi-sysctrl regmap\n");
read_len = MESON_SAR_ADC_EFUSE_BYTES;
buf = nvmem_cell_read(temperature_calib, &read_len);
- if (IS_ERR(buf)) {
- dev_err(indio_dev->dev.parent,
- "failed to read temperature_calib cell\n");
- return PTR_ERR(buf);
- } else if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
+ if (IS_ERR(buf))
+ return dev_err_probe(dev, PTR_ERR(buf), "failed to read temperature_calib cell\n");
+ if (read_len != MESON_SAR_ADC_EFUSE_BYTES) {
kfree(buf);
- dev_err(indio_dev->dev.parent,
- "invalid read size of temperature_calib cell\n");
- return -EINVAL;
+ return dev_err_probe(dev, -EINVAL, "invalid read size of temperature_calib cell\n");
}
trimming_bits = priv->param->temperature_trimming_bits;
@@ -765,6 +758,7 @@ static int meson_sar_adc_temp_sensor_init(struct iio_dev *indio_dev)
static int meson_sar_adc_init(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
+ struct device *dev = indio_dev->dev.parent;
int regval, i, ret;
/*
@@ -888,18 +882,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
}
ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
- if (ret) {
- dev_err(indio_dev->dev.parent,
- "failed to set adc parent to clkin\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to set adc parent to clkin\n");
ret = clk_set_rate(priv->adc_clk, priv->param->clock_rate);
- if (ret) {
- dev_err(indio_dev->dev.parent,
- "failed to set adc clock rate\n");
- return ret;
- }
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to set adc clock rate\n");
return 0;
}
@@ -1186,24 +1174,21 @@ static int meson_sar_adc_probe(struct platform_device *pdev)
{
const struct meson_sar_adc_data *match_data;
struct meson_sar_adc_priv *priv;
+ struct device *dev = &pdev->dev;
struct iio_dev *indio_dev;
void __iomem *base;
int irq, ret;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
- if (!indio_dev) {
- dev_err(&pdev->dev, "failed allocating iio device\n");
- return -ENOMEM;
- }
+ if (!indio_dev)
+ return dev_err_probe(dev, -ENOMEM, "failed allocating iio device\n");
priv = iio_priv(indio_dev);
init_completion(&priv->done);
match_data = of_device_get_match_data(&pdev->dev);
- if (!match_data) {
- dev_err(&pdev->dev, "failed to get match data\n");
- return -ENODEV;
- }
+ if (!match_data)
+ return dev_err_probe(dev, -ENODEV, "failed to get match data\n");
priv->param = match_data->param;
It's fine to call dev_err_probe() in ->probe() when error code is known. Convert the driver to use dev_err_probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/iio/adc/meson_saradc.c | 51 ++++++++++++---------------------- 1 file changed, 18 insertions(+), 33 deletions(-)