mbox series

[v9,0/2] phy: mediatek: Add PCIe PHY driver

Message ID 20220520064920.27313-1-jianjun.wang@mediatek.com (mailing list archive)
Headers show
Series phy: mediatek: Add PCIe PHY driver | expand

Message

Jianjun Wang (王建军) May 20, 2022, 6:49 a.m. UTC 
These series patches add support for PCIe PHY driver on MediaTek chipsets.

Changes in v9:
1. Check if the return value is -ENOMEM when reading efuse data fails.

Changes in v8:
1. Use "device_property_present()" to increase human readability;
2. Use "GPL" as recommended in commit bf7fbeeae6db ("module: Cure
   the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity").

Changes in v7:
1. Add bitfield.h header to fix the build error on non-arm64 platforms.

Changes in v6:
1. Remove unnecessary header files;
2. Use FILELD_PREP in bitfield.h to set value.

Changes in v5:
1. Fix typo in kerneldoc: "eFues" => "eFuse".

Changes in v4:
1. Fix no return when calling dev_err_probe.

Changes in v3:
1. Add introductions for structure members;
2. Add SoC dependent data;
3. Dynamically allocate efuse data;
4. Check return value if it's an -EPROBE_DEFER.

Changes in v2:
1. Add specific compatible name;
2. Read NVMEM data at probe time;
3. Fix typos.

Jianjun Wang (2):
  dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
  phy: mediatek: Add PCIe PHY driver

 .../bindings/phy/mediatek,pcie-phy.yaml       |  75 +++++
 drivers/phy/mediatek/Kconfig                  |  11 +
 drivers/phy/mediatek/Makefile                 |   1 +
 drivers/phy/mediatek/phy-mtk-pcie.c           | 267 ++++++++++++++++++
 4 files changed, 354 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
 create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c

Comments

Jianjun Wang (王建军) June 1, 2022, 2:21 a.m. UTC | #1 
Hello Maintainers,

Gentle ping for this patch series, if there is anything I can do to get
these patches merged, please let me know.

Thanks.

On Fri, 2022-05-20 at 14:49 +0800, Jianjun Wang wrote:
> These series patches add support for PCIe PHY driver on MediaTek
> chipsets.
> 
> Changes in v9:
> 1. Check if the return value is -ENOMEM when reading efuse data
> fails.
> 
> Changes in v8:
> 1. Use "device_property_present()" to increase human readability;
> 2. Use "GPL" as recommended in commit bf7fbeeae6db ("module: Cure
>    the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity").
> 
> Changes in v7:
> 1. Add bitfield.h header to fix the build error on non-arm64
> platforms.
> 
> Changes in v6:
> 1. Remove unnecessary header files;
> 2. Use FILELD_PREP in bitfield.h to set value.
> 
> Changes in v5:
> 1. Fix typo in kerneldoc: "eFues" => "eFuse".
> 
> Changes in v4:
> 1. Fix no return when calling dev_err_probe.
> 
> Changes in v3:
> 1. Add introductions for structure members;
> 2. Add SoC dependent data;
> 3. Dynamically allocate efuse data;
> 4. Check return value if it's an -EPROBE_DEFER.
> 
> Changes in v2:
> 1. Add specific compatible name;
> 2. Read NVMEM data at probe time;
> 3. Fix typos.
> 
> Jianjun Wang (2):
>   dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
>   phy: mediatek: Add PCIe PHY driver
> 
>  .../bindings/phy/mediatek,pcie-phy.yaml       |  75 +++++
>  drivers/phy/mediatek/Kconfig                  |  11 +
>  drivers/phy/mediatek/Makefile                 |   1 +
>  drivers/phy/mediatek/phy-mtk-pcie.c           | 267
> ++++++++++++++++++
>  4 files changed, 354 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
>  create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c
>
Vinod Koul June 1, 2022, 5:32 a.m. UTC | #2 
On 01-06-22, 10:21, Jianjun Wang wrote:
> Hello Maintainers,
> 
> Gentle ping for this patch series, if there is anything I can do to get
> these patches merged, please let me know.

Patience my friend patience. This was received very late in cycle and I
will review after merge window closes..


> 
> Thanks.
> 
> On Fri, 2022-05-20 at 14:49 +0800, Jianjun Wang wrote:
> > These series patches add support for PCIe PHY driver on MediaTek
> > chipsets.
> > 
> > Changes in v9:
> > 1. Check if the return value is -ENOMEM when reading efuse data
> > fails.
> > 
> > Changes in v8:
> > 1. Use "device_property_present()" to increase human readability;
> > 2. Use "GPL" as recommended in commit bf7fbeeae6db ("module: Cure
> >    the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity").
> > 
> > Changes in v7:
> > 1. Add bitfield.h header to fix the build error on non-arm64
> > platforms.
> > 
> > Changes in v6:
> > 1. Remove unnecessary header files;
> > 2. Use FILELD_PREP in bitfield.h to set value.
> > 
> > Changes in v5:
> > 1. Fix typo in kerneldoc: "eFues" => "eFuse".
> > 
> > Changes in v4:
> > 1. Fix no return when calling dev_err_probe.
> > 
> > Changes in v3:
> > 1. Add introductions for structure members;
> > 2. Add SoC dependent data;
> > 3. Dynamically allocate efuse data;
> > 4. Check return value if it's an -EPROBE_DEFER.
> > 
> > Changes in v2:
> > 1. Add specific compatible name;
> > 2. Read NVMEM data at probe time;
> > 3. Fix typos.
> > 
> > Jianjun Wang (2):
> >   dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
> >   phy: mediatek: Add PCIe PHY driver
> > 
> >  .../bindings/phy/mediatek,pcie-phy.yaml       |  75 +++++
> >  drivers/phy/mediatek/Kconfig                  |  11 +
> >  drivers/phy/mediatek/Makefile                 |   1 +
> >  drivers/phy/mediatek/phy-mtk-pcie.c           | 267
> > ++++++++++++++++++
> >  4 files changed, 354 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> >  create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c
> >
Jianjun Wang (王建军) June 14, 2022, 2:38 a.m. UTC | #3 
Hi Vinod,

Sorry to disturb you, would you mind taking a look at this patch?

Thanks.

On Wed, 2022-06-01 at 11:02 +0530, Vinod Koul wrote:
> On 01-06-22, 10:21, Jianjun Wang wrote:
> > Hello Maintainers,
> > 
> > Gentle ping for this patch series, if there is anything I can do to
> > get
> > these patches merged, please let me know.
> 
> Patience my friend patience. This was received very late in cycle and
> I
> will review after merge window closes..
> 
> 
> > 
> > Thanks.
> > 
> > On Fri, 2022-05-20 at 14:49 +0800, Jianjun Wang wrote:
> > > These series patches add support for PCIe PHY driver on MediaTek
> > > chipsets.
> > > 
> > > Changes in v9:
> > > 1. Check if the return value is -ENOMEM when reading efuse data
> > > fails.
> > > 
> > > Changes in v8:
> > > 1. Use "device_property_present()" to increase human readability;
> > > 2. Use "GPL" as recommended in commit bf7fbeeae6db ("module: Cure
> > >    the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity").
> > > 
> > > Changes in v7:
> > > 1. Add bitfield.h header to fix the build error on non-arm64
> > > platforms.
> > > 
> > > Changes in v6:
> > > 1. Remove unnecessary header files;
> > > 2. Use FILELD_PREP in bitfield.h to set value.
> > > 
> > > Changes in v5:
> > > 1. Fix typo in kerneldoc: "eFues" => "eFuse".
> > > 
> > > Changes in v4:
> > > 1. Fix no return when calling dev_err_probe.
> > > 
> > > Changes in v3:
> > > 1. Add introductions for structure members;
> > > 2. Add SoC dependent data;
> > > 3. Dynamically allocate efuse data;
> > > 4. Check return value if it's an -EPROBE_DEFER.
> > > 
> > > Changes in v2:
> > > 1. Add specific compatible name;
> > > 2. Read NVMEM data at probe time;
> > > 3. Fix typos.
> > > 
> > > Jianjun Wang (2):
> > >   dt-bindings: phy: mediatek: Add YAML schema for PCIe PHY
> > >   phy: mediatek: Add PCIe PHY driver
> > > 
> > >  .../bindings/phy/mediatek,pcie-phy.yaml       |  75 +++++
> > >  drivers/phy/mediatek/Kconfig                  |  11 +
> > >  drivers/phy/mediatek/Makefile                 |   1 +
> > >  drivers/phy/mediatek/phy-mtk-pcie.c           | 267
> > > ++++++++++++++++++
> > >  4 files changed, 354 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/phy/mediatek,pcie-phy.yaml
> > >  create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c
> > > 
> 
>