@@ -4,7 +4,6 @@
#include <linux/circ_buf.h>
#include <linux/ctype.h>
#include <linux/debugfs.h>
-#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/string_helpers.h>
@@ -131,11 +130,7 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
struct drm_device *dev = node->minor->dev;
struct v3d_dev *v3d = to_v3d_dev(dev);
u32 ident0, ident1, ident2, ident3, cores;
- int ret, core;
-
- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;
+ int core;
ident0 = V3D_READ(V3D_HUB_IDENT0);
ident1 = V3D_READ(V3D_HUB_IDENT1);
@@ -188,9 +183,6 @@ static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
(misccfg & V3D_MISCCFG_OVRTMUOUT) != 0);
}
- pm_runtime_mark_last_busy(v3d->drm.dev);
- pm_runtime_put_autosuspend(v3d->drm.dev);
-
return 0;
}
@@ -218,11 +210,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
uint32_t cycles;
int core = 0;
int measure_ms = 1000;
- int ret;
-
- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;
if (v3d->ver >= 40) {
V3D_CORE_WRITE(core, V3D_V4_PCTR_0_SRC_0_3,
@@ -246,9 +233,6 @@ static int v3d_measure_clock(struct seq_file *m, void *unused)
cycles / (measure_ms * 1000),
(cycles / (measure_ms * 100)) % 10);
- pm_runtime_mark_last_busy(v3d->drm.dev);
- pm_runtime_put_autosuspend(v3d->drm.dev);
-
return 0;
}
@@ -19,7 +19,6 @@
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <drm/drm_drv.h>
@@ -43,7 +42,6 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
{
struct v3d_dev *v3d = to_v3d_dev(dev);
struct drm_v3d_get_param *args = data;
- int ret;
static const u32 reg_map[] = {
[DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG,
[DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1,
@@ -69,17 +67,12 @@ static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
if (args->value != 0)
return -EINVAL;
- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- return ret;
if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 &&
args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) {
args->value = V3D_CORE_READ(0, offset);
} else {
args->value = V3D_READ(offset);
}
- pm_runtime_mark_last_busy(v3d->drm.dev);
- pm_runtime_put_autosuspend(v3d->drm.dev);
return 0;
}
@@ -280,10 +273,6 @@ static int v3d_platform_drm_probe(struct platform_device *pdev)
return -ENOMEM;
}
- pm_runtime_use_autosuspend(dev);
- pm_runtime_set_autosuspend_delay(dev, 50);
- pm_runtime_enable(dev);
-
ret = v3d_gem_init(drm);
if (ret)
goto dma_free;
@@ -6,7 +6,6 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/sched/signal.h>
#include <linux/uaccess.h>
@@ -367,9 +366,6 @@ v3d_job_free(struct kref *ref)
dma_fence_put(job->irq_fence);
dma_fence_put(job->done_fence);
- pm_runtime_mark_last_busy(job->v3d->drm.dev);
- pm_runtime_put_autosuspend(job->v3d->drm.dev);
-
if (job->perfmon)
v3d_perfmon_put(job->perfmon);
@@ -471,14 +467,10 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
job->v3d = v3d;
job->free = free;
- ret = pm_runtime_get_sync(v3d->drm.dev);
- if (ret < 0)
- goto fail;
-
ret = drm_sched_job_init(&job->base, &v3d_priv->sched_entity[queue],
v3d_priv);
if (ret)
- goto fail_job;
+ goto fail;
if (has_multisync) {
if (se->in_sync_count && se->wait_stage == queue) {
@@ -509,8 +501,6 @@ v3d_job_init(struct v3d_dev *v3d, struct drm_file *file_priv,
fail_deps:
drm_sched_job_cleanup(&job->base);
-fail_job:
- pm_runtime_put_autosuspend(v3d->drm.dev);
fail:
kfree(*container);
*container = NULL;
Runtime PM doesn't seem to work correctly on this driver. On top of that, commit 8b6864e3e138 ("drm/v3d/v3d_drv: Remove unused static variable 'v3d_v3d_pm_ops'") hints that it most likely never did as the driver's PM ops were not hooked-up. So, in order to support regular operation with V3D on BCM2711 (Raspberry Pi 4), get rid of the PM code. PM will be reinstated once we figure out the underlying issues. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Peter Robinson <pbrobinson@gmail.com> --- Changes since v5: - Rebase Changes since v3: - Minor updates for rebase drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +----------------- drivers/gpu/drm/v3d/v3d_drv.c | 11 ----------- drivers/gpu/drm/v3d/v3d_gem.c | 12 +----------- 3 files changed, 2 insertions(+), 39 deletions(-)