diff mbox series

[v2,10/11] dt-bindings: display: convert Arm Mali-DP to DT schema

Message ID 20220506140533.3566431-11-andre.przywara@arm.com (mailing list archive)
State New, archived
Headers show
Series None | expand

Commit Message

Andre Przywara May 6, 2022, 2:05 p.m. UTC 
The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
out a framebuffer and hands the pixels over to a digital signal encoder.
It supports multiple layers, scaling and rotation.

Convert the existing DT binding to DT schema.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 .../bindings/display/arm,malidp.txt           |  68 ----------
 .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
 2 files changed, 116 insertions(+), 68 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
 create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml

Comments

Rob Herring May 6, 2022, 10:39 p.m. UTC | #1 
On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:
> The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
> out a framebuffer and hands the pixels over to a digital signal encoder.
> It supports multiple layers, scaling and rotation.
> 
> Convert the existing DT binding to DT schema.
> 
> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> ---
>  .../bindings/display/arm,malidp.txt           |  68 ----------
>  .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
>  2 files changed, 116 insertions(+), 68 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
>  create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


display@f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb
Andre Przywara May 9, 2022, 1:49 p.m. UTC | #2 
On Fri, 06 May 2022 17:39:53 -0500
Rob Herring <robh@kernel.org> wrote:

> On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:
> > The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
> > out a framebuffer and hands the pixels over to a digital signal encoder.
> > It supports multiple layers, scaling and rotation.
> > 
> > Convert the existing DT binding to DT schema.
> > 
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > ---
> >  .../bindings/display/arm,malidp.txt           |  68 ----------
> >  .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
> >  2 files changed, 116 insertions(+), 68 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
> >  create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
> >   
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/
> 
> 
> display@f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
> 	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb

Ah, good point, I missed that directory when testing. I came up with the
following change on top:

==============================
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
index ea7b7100548bf..bc0d3f3ab2b75 100644
--- a/Documentation/devicetree/bindings/display/arm,malidp.yaml
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -76,6 +76,14 @@ properties:
     description:
       integer describing the ARQoS levels of DP500's QoS signaling
 
+  arm,malidp-arqos-value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Quality-of-Service value for the display engine FIFOs, to write
+      into the RQOS register of the DP500.
+      See the ARM Mali-DP500 TRM for details on the encoding.
+      If omitted, the RQOS register will not be changed.
+
   port:
     $ref: /schemas/graph.yaml#/properties/port
     unevaluatedProperties: false
==============================

Cheers,
Andre
Liviu Dudau May 11, 2022, 12:03 p.m. UTC | #3 
On Mon, May 09, 2022 at 02:49:01PM +0100, Andre Przywara wrote:
> On Fri, 06 May 2022 17:39:53 -0500
> Rob Herring <robh@kernel.org> wrote:
> 
> > On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:
> > > The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
> > > out a framebuffer and hands the pixels over to a digital signal encoder.
> > > It supports multiple layers, scaling and rotation.
> > > 
> > > Convert the existing DT binding to DT schema.
> > > 
> > > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > > ---
> > >  .../bindings/display/arm,malidp.txt           |  68 ----------
> > >  .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
> > >  2 files changed, 116 insertions(+), 68 deletions(-)
> > >  delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
> > >  create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
> > >   
> > 
> > Running 'make dtbs_check' with the schema in this patch gives the
> > following warnings. Consider if they are expected or the schema is
> > incorrect. These may not be new warnings.
> > 
> > Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> > This will change in the future.
> > 
> > Full log is available here: https://patchwork.ozlabs.org/patch/
> > 
> > 
> > display@f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+'
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
> > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb
> 
> Ah, good point, I missed that directory when testing. I came up with the
> following change on top:
> 
> ==============================
> diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> index ea7b7100548bf..bc0d3f3ab2b75 100644
> --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml
> +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> @@ -76,6 +76,14 @@ properties:
>      description:
>        integer describing the ARQoS levels of DP500's QoS signaling
>  
> +  arm,malidp-arqos-value:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Quality-of-Service value for the display engine FIFOs, to write
> +      into the RQOS register of the DP500.
> +      See the ARM Mali-DP500 TRM for details on the encoding.
> +      If omitted, the RQOS register will not be changed.
> +

Actually, this needs to replace 'arm,malidp-arqos-high-level'. Commit ce6eb0253cba
("dt/bindings: display: Add optional property node define for Mali DP500") is
introducing the wrong property (it mentions 'arm,malidp-arqos-value' in the commit
message). There is no user of 'arm,malidp-arqos-high-level' in the kernel.

Appologies for signing off on the wrong patch content at that time.

Best regards,
Liviu

>    port:
>      $ref: /schemas/graph.yaml#/properties/port
>      unevaluatedProperties: false
> ==============================
> 
> Cheers,
> Andre
Andre Przywara June 9, 2022, 4:31 p.m. UTC | #4 
On Wed, 11 May 2022 13:03:36 +0100
Liviu Dudau <liviu.dudau@arm.com> wrote:

Hi Liviu,

> On Mon, May 09, 2022 at 02:49:01PM +0100, Andre Przywara wrote:
> > On Fri, 06 May 2022 17:39:53 -0500
> > Rob Herring <robh@kernel.org> wrote:
> >   
> > > On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:  
> > > > The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans
> > > > out a framebuffer and hands the pixels over to a digital signal encoder.
> > > > It supports multiple layers, scaling and rotation.
> > > > 
> > > > Convert the existing DT binding to DT schema.
> > > > 
> > > > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > > > ---
> > > >  .../bindings/display/arm,malidp.txt           |  68 ----------
> > > >  .../bindings/display/arm,malidp.yaml          | 116 ++++++++++++++++++
> > > >  2 files changed, 116 insertions(+), 68 deletions(-)
> > > >  delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt
> > > >  create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
> > > >     
> > > 
> > > Running 'make dtbs_check' with the schema in this patch gives the
> > > following warnings. Consider if they are expected or the schema is
> > > incorrect. These may not be new warnings.
> > > 
> > > Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> > > This will change in the future.
> > > 
> > > Full log is available here: https://patchwork.ozlabs.org/patch/
> > > 
> > > 
> > > display@f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+'
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb
> > > 	arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb  
> > 
> > Ah, good point, I missed that directory when testing. I came up with the
> > following change on top:
> > 
> > ==============================
> > diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> > index ea7b7100548bf..bc0d3f3ab2b75 100644
> > --- a/Documentation/devicetree/bindings/display/arm,malidp.yaml
> > +++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
> > @@ -76,6 +76,14 @@ properties:
> >      description:
> >        integer describing the ARQoS levels of DP500's QoS signaling
> >  
> > +  arm,malidp-arqos-value:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      Quality-of-Service value for the display engine FIFOs, to write
> > +      into the RQOS register of the DP500.
> > +      See the ARM Mali-DP500 TRM for details on the encoding.
> > +      If omitted, the RQOS register will not be changed.
> > +  
> 
> Actually, this needs to replace 'arm,malidp-arqos-high-level'. Commit ce6eb0253cba
> ("dt/bindings: display: Add optional property node define for Mali DP500") is
> introducing the wrong property (it mentions 'arm,malidp-arqos-value' in the commit
> message). There is no user of 'arm,malidp-arqos-high-level' in the kernel.

Ah, thanks for the report and the background, and sorry for the delay. I
verified that, and sent a patch[1], since this binding here was already
merged.

Cheers,
Andre

[1]
https://lore.kernel.org/linux-arm-kernel/20220609162729.1441760-1-andre.przywara@arm.com/T/#u

> 
> Appologies for signing off on the wrong patch content at that time.
> 
> Best regards,
> Liviu
> 
> >    port:
> >      $ref: /schemas/graph.yaml#/properties/port
> >      unevaluatedProperties: false
> > ==============================
> > 
> > Cheers,
> > Andre  
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/arm,malidp.txt b/Documentation/devicetree/bindings/display/arm,malidp.txt
deleted file mode 100644
index 7a97a2b48c2a2..0000000000000
--- a/Documentation/devicetree/bindings/display/arm,malidp.txt
+++ /dev/null
@@ -1,68 +0,0 @@ 
-ARM Mali-DP
-
-The following bindings apply to a family of Display Processors sold as
-licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
-DP650 processors that offer multiple composition layers, support for
-rotation and scaling output.
-
-Required properties:
-  - compatible: should be one of
-	"arm,mali-dp500"
-	"arm,mali-dp550"
-	"arm,mali-dp650"
-    depending on the particular implementation present in the hardware
-  - reg: Physical base address and size of the block of registers used by
-    the processor.
-  - interrupts: Interrupt list, as defined in ../interrupt-controller/interrupts.txt,
-    interrupt client nodes.
-  - interrupt-names: name of the engine inside the processor that will
-    use the corresponding interrupt. Should be one of "DE" or "SE".
-  - clocks: A list of phandle + clock-specifier pairs, one for each entry
-    in 'clock-names'
-  - clock-names: A list of clock names. It should contain:
-      - "pclk": for the APB interface clock
-      - "aclk": for the AXI interface clock
-      - "mclk": for the main processor clock
-      - "pxlclk": for the pixel clock feeding the output PLL of the processor.
-  - arm,malidp-output-port-lines: Array of u8 values describing the number
-    of output lines per channel (R, G and B).
-
-Required sub-nodes:
-  - port: The Mali DP connection to an encoder input port. The connection
-    is modelled using the OF graph bindings specified in
-    Documentation/devicetree/bindings/graph.txt
-
-Optional properties:
-  - memory-region: phandle to a node describing memory (see
-    Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt)
-    to be used for the framebuffer; if not present, the framebuffer may
-    be located anywhere in memory.
-  - arm,malidp-arqos-high-level: integer of u32 value describing the ARQoS
-    levels of DP500's QoS signaling.
-
-
-Example:
-
-/ {
-	...
-
-	dp0: malidp@6f200000 {
-		compatible = "arm,mali-dp650";
-		reg = <0 0x6f200000 0 0x20000>;
-		memory-region = <&display_reserved>;
-		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 168 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "DE", "SE";
-		clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
-		clock-names = "pxlclk", "mclk", "aclk", "pclk";
-		arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
-		arm,malidp-arqos-high-level = <0xd000d000>;
-		port {
-			dp0_output: endpoint {
-				remote-endpoint = <&tda998x_2_input>;
-			};
-		};
-	};
-
-	...
-};
diff --git a/Documentation/devicetree/bindings/display/arm,malidp.yaml b/Documentation/devicetree/bindings/display/arm,malidp.yaml
new file mode 100644
index 0000000000000..ea7b7100548bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/arm,malidp.yaml
@@ -0,0 +1,116 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/arm,malidp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Arm Mali Display Processor (Mali-DP) binding
+
+maintainers:
+  - Liviu Dudau <Liviu.Dudau@arm.com>
+  - Andre Przywara <andre.przywara@arm.com>
+
+description:
+  The following bindings apply to a family of Display Processors sold as
+  licensable IP by ARM Ltd. The bindings describe the Mali DP500, DP550 and
+  DP650 processors that offer multiple composition layers, support for
+  rotation and scaling output.
+
+properties:
+  compatible:
+    enum:
+      - arm,mali-dp500
+      - arm,mali-dp550
+      - arm,mali-dp650
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description:
+          The interrupt used by the Display Engine (DE). Can be shared with
+          the interrupt for the Scaling Engine (SE), but it will have to be
+          listed individually.
+      - description:
+          The interrupt used by the Scaling Engine (SE). Can be shared with
+          the interrupt for the Display Engine (DE), but it will have to be
+          listed individually.
+
+  interrupt-names:
+    items:
+      - const: DE
+      - const: SE
+
+  clock-names:
+    items:
+      - const: pxlclk
+      - const: mclk
+      - const: aclk
+      - const: pclk
+
+  clocks:
+    items:
+      - description: the pixel clock feeding the output PLL of the processor
+      - description: the main processor clock
+      - description: the AXI interface clock
+      - description: the APB interface clock
+
+  memory-region:
+    maxItems: 1
+    description:
+      Phandle to a node describing memory to be used for the framebuffer.
+      If not present, the framebuffer may be located anywhere in memory.
+
+  arm,malidp-output-port-lines:
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    description:
+      Number of output lines/bits for each colour channel.
+    items:
+      - description: number of output lines for the red channel (R)
+      - description: number of output lines for the green channel (G)
+      - description: number of output lines for the blue channel (B)
+
+  arm,malidp-arqos-high-level:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      integer describing the ARQoS levels of DP500's QoS signaling
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    unevaluatedProperties: false
+    description:
+      Output endpoint of the controller, connecting the LCD panel signals.
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - port
+  - arm,malidp-output-port-lines
+
+examples:
+  - |
+    dp0: malidp@6f200000 {
+        compatible = "arm,mali-dp650";
+        reg = <0x6f200000 0x20000>;
+        memory-region = <&display_reserved>;
+        interrupts = <168>, <168>;
+        interrupt-names = "DE", "SE";
+        clocks = <&oscclk2>, <&fpgaosc0>, <&fpgaosc1>, <&fpgaosc1>;
+        clock-names = "pxlclk", "mclk", "aclk", "pclk";
+        arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
+        arm,malidp-arqos-high-level = <0xd000d000>;
+
+        port {
+            dp0_output: endpoint {
+                remote-endpoint = <&tda998x_2_input>;
+            };
+        };
+    };
+...