deleted file mode 100644
@@ -1,77 +0,0 @@
-* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
-
-The device is controlled through two pins: FL_EN and EN_SET. The pins when,
-asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
-respectively. In order to add a capability of selecting the strobe signal source
-(e.g. CPU or camera sensor) there is an additional switch required, independent
-of the flash chip. The switch is controlled with pin control.
-
-Required properties:
-
-- compatible : Must be "skyworks,aat1290".
-- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
-- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
-
-Optional properties:
-- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
- "default" and "host" must refer to the same pin configuration
- node, which sets the host as a strobe signal provider. Entry
- "isp" must refer to the pin configuration node, which sets the
- ISP as a strobe signal provider.
-
-A discrete LED element connected to the device must be represented by a child
-node - see Documentation/devicetree/bindings/leds/common.txt.
-
-Required properties of the LED child node:
-- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
-- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
- Maximum flash LED supply current can be calculated using
- following formula: I = 1A * 162kohm / Rset.
-- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
- Maximum flash timeout can be calculated using following
- formula: T = 8.82 * 10^9 * Ct.
-
-Optional properties of the LED child node:
-- function : see Documentation/devicetree/bindings/leds/common.txt
-- color : see Documentation/devicetree/bindings/leds/common.txt
-- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
-
-Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
-a switch that allows for routing strobe signal either from the host or from
-the camera sensor):
-
-#include "exynos4412.dtsi"
-#include <dt-bindings/leds/common.h>
-
-led-controller {
- compatible = "skyworks,aat1290";
- flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
- enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
-
- pinctrl-names = "default", "host", "isp";
- pinctrl-0 = <&camera_flash_host>;
- pinctrl-1 = <&camera_flash_host>;
- pinctrl-2 = <&camera_flash_isp>;
-
- camera_flash: led {
- function = LED_FUNCTION_FLASH;
- color = <LED_COLOR_ID_WHITE>;
- led-max-microamp = <520833>;
- flash-max-microamp = <1012500>;
- flash-max-timeout-us = <1940000>;
- };
-};
-
-&pinctrl_0 {
- camera_flash_host: camera-flash-host {
- samsung,pins = "gpj1-0";
- samsung,pin-function = <1>;
- samsung,pin-val = <0>;
- };
-
- camera_flash_isp: camera-flash-isp {
- samsung,pins = "gpj1-0";
- samsung,pin-function = <1>;
- samsung,pin-val = <1>;
- };
-};
new file mode 100644
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
+ asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+ respectively. In order to add a capability of selecting the strobe signal
+ source (e.g. CPU or camera sensor) there is an additional switch required,
+ independent of the flash chip. The switch is controlled with pin control.
+
+properties:
+ compatible:
+ const: skyworks,aat1290
+
+ enset-gpios:
+ maxItems: 1
+ description: EN_SET pin
+
+ flen-gpios:
+ maxItems: 1
+ description: FL_EN pin
+
+ led:
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ led-max-microamp: true
+
+ flash-max-microamp:
+ description: |
+ Maximum flash LED supply current can be calculated using following
+ formula:: I = 1A * 162 kOhm / Rset.
+
+ flash-max-timeout-us:
+ description: |
+ Maximum flash timeout can be calculated using following formula::
+ T = 8.82 * 10^9 * Ct.
+
+ required:
+ - flash-max-microamp
+ - flash-max-timeout-us
+ - led-max-microamp
+
+ pinctrl-names:
+ items:
+ - const: default
+ - const: host
+ - const: isp
+
+ pinctrl-0: true
+ pinctrl-1: true
+ pinctrl-2: true
+
+required:
+ - compatible
+ - enset-gpios
+ - flen-gpios
+ - led
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ // Ct = 220 nF, Rset = 160 kOhm
+ led-controller {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ led {
+ label = "flash";
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <520833>;
+ flash-max-microamp = <1012500>;
+ flash-max-timeout-us = <1940000>;
+ };
+ };
Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- .../devicetree/bindings/leds/leds-aat1290.txt | 77 --------------- .../bindings/leds/skyworks,aat1290.yaml | 96 +++++++++++++++++++ 2 files changed, 96 insertions(+), 77 deletions(-) delete mode 100644 Documentation/devicetree/bindings/leds/leds-aat1290.txt create mode 100644 Documentation/devicetree/bindings/leds/skyworks,aat1290.yaml