| Message ID | 20220608095623.22327-19-tmaimon77@gmail.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | Introduce Nuvoton Arbel NPCM8XX BMC SoC | expand |
On 08/06/2022 11:56, Tomer Maimon wrote: > This adds initial device tree support for the > Nuvoton NPCM845 Board Management controller (BMC) SoC family. > > The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and > have various peripheral IPs. > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > --- > arch/arm64/boot/dts/Makefile | 1 + > .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 197 ++++++++++++++++++ > .../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 +++++++ > 3 files changed, 274 insertions(+) > create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi > > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > index 1ba04e31a438..7b107fa7414b 100644 > --- a/arch/arm64/boot/dts/Makefile > +++ b/arch/arm64/boot/dts/Makefile > @@ -19,6 +19,7 @@ subdir-y += lg > subdir-y += marvell > subdir-y += mediatek > subdir-y += microchip > +subdir-y += nuvoton > subdir-y += nvidia > subdir-y += qcom > subdir-y += realtek > diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > new file mode 100644 > index 000000000000..97e108c50760 > --- /dev/null > +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > @@ -0,0 +1,197 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com > + > +#include <dt-bindings/clock/nuvoton,npcm8xx-clock.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/interrupt-controller/irq.h> > + > +/ { > + #address-cells = <2>; > + #size-cells = <2>; > + interrupt-parent = <&gic>; > + > + /* external reference clock */ > + clk_refclk: clk-refclk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; Ignored comment. > + clock-output-names = "refclk"; > + }; > + > + /* external reference clock for cpu. float in normal operation */ > + clk_sysbypck: clk-sysbypck { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1000000000>; Ignored comment. > + clock-output-names = "sysbypck"; > + }; > + > + /* external reference clock for MC. float in normal operation */ > + clk_mcbypck: clk-mcbypck { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1050000000>; > + clock-output-names = "mcbypck"; > + }; > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + interrupt-parent = <&gic>; > + ranges; > + > + gcr: gcr@f0800000 { Ignored comment. > + compatible = "nuvoton,npcm845-gcr", "syscon", > + "simple-mfd"; This is not a simple-mfd... I see original bindings defined it that way, but why? I think they should be corrected - remove simple-mfd from the bindings and DTS. > + reg = <0x0 0xf0800000 0x0 0x1000>; > + }; > + > + gic: interrupt-controller@dfff9000 { > + compatible = "arm,gic-400"; > + reg = <0x0 0xdfff9000 0x0 0x1000>, > + <0x0 0xdfffa000 0x0 0x2000>, > + <0x0 0xdfffc000 0x0 0x2000>, > + <0x0 0xdfffe000 0x0 0x2000>; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > + #interrupt-cells = <3>; > + interrupt-controller; > + #address-cells = <0>; > + ppi-partitions { > + ppi_cluster0: interrupt-partition-0 { > + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; > + }; > + }; > + }; > + }; > + > + ahb { > + #address-cells = <2>; > + #size-cells = <2>; > + compatible = "simple-bus"; > + interrupt-parent = <&gic>; > + ranges; > + > + rstc: rstc@f0801000 { Ignored comment. Four comments from v1 ignored in this patch alone. I'll stop reviewing, it is a waste of my time. NAK for this change. Best regards, Krzysztof
Hi Krzysztof, Sorry, probably I missed your comments (too many patches to handle at one time :-))... On Wed, 8 Jun 2022 at 13:21, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > On 08/06/2022 11:56, Tomer Maimon wrote: > > This adds initial device tree support for the > > Nuvoton NPCM845 Board Management controller (BMC) SoC family. > > > > The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and > > have various peripheral IPs. > > > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > > --- > > arch/arm64/boot/dts/Makefile | 1 + > > .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 197 ++++++++++++++++++ > > .../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 +++++++ > > 3 files changed, 274 insertions(+) > > create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > > create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi > > > > diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile > > index 1ba04e31a438..7b107fa7414b 100644 > > --- a/arch/arm64/boot/dts/Makefile > > +++ b/arch/arm64/boot/dts/Makefile > > @@ -19,6 +19,7 @@ subdir-y += lg > > subdir-y += marvell > > subdir-y += mediatek > > subdir-y += microchip > > +subdir-y += nuvoton > > subdir-y += nvidia > > subdir-y += qcom > > subdir-y += realtek > > diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > > new file mode 100644 > > index 000000000000..97e108c50760 > > --- /dev/null > > +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > > @@ -0,0 +1,197 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com > > + > > +#include <dt-bindings/clock/nuvoton,npcm8xx-clock.h> > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > +#include <dt-bindings/interrupt-controller/irq.h> > > + > > +/ { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + interrupt-parent = <&gic>; > > + > > + /* external reference clock */ > > + clk_refclk: clk-refclk { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <25000000>; > > Ignored comment. Could we use it as a default clock-frequency? > > > + clock-output-names = "refclk"; > > + }; > > + > > + /* external reference clock for cpu. float in normal operation */ > > + clk_sysbypck: clk-sysbypck { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <1000000000>; > > Ignored comment. same as above > > > + clock-output-names = "sysbypck"; > > + }; > > + > > + /* external reference clock for MC. float in normal operation */ > > + clk_mcbypck: clk-mcbypck { > > + compatible = "fixed-clock"; > > + #clock-cells = <0>; > > + clock-frequency = <1050000000>; same as above > > + clock-output-names = "mcbypck"; > > + }; > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + interrupt-parent = <&gic>; > > + ranges; > > + > > + gcr: gcr@f0800000 { I understand it sounds generic but I try to be as much compatible with NPCM7XX https://elixir.bootlin.com/linux/v5.19-rc1/source/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi#L91 > > Ignored comment. > > > + compatible = "nuvoton,npcm845-gcr", "syscon", > > + "simple-mfd"; > > This is not a simple-mfd... I see original bindings defined it that way, > but why? I think they should be corrected - remove simple-mfd from the > bindings and DTS. will remove in both places in V3 > > > > + reg = <0x0 0xf0800000 0x0 0x1000>; > > + }; > > + > > + gic: interrupt-controller@dfff9000 { > > + compatible = "arm,gic-400"; > > + reg = <0x0 0xdfff9000 0x0 0x1000>, > > + <0x0 0xdfffa000 0x0 0x2000>, > > + <0x0 0xdfffc000 0x0 0x2000>, > > + <0x0 0xdfffe000 0x0 0x2000>; > > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; > > + #interrupt-cells = <3>; > > + interrupt-controller; > > + #address-cells = <0>; > > + ppi-partitions { > > + ppi_cluster0: interrupt-partition-0 { > > + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; > > + }; > > + }; > > + }; > > + }; > > + > > + ahb { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + compatible = "simple-bus"; > > + interrupt-parent = <&gic>; > > + ranges; > > + > > + rstc: rstc@f0801000 { > > Ignored comment. > I understand it sounds generic but I try to be as much compatible with NPCM7XX https://elixir.bootlin.com/linux/v5.19-rc1/source/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi#L109 > Four comments from v1 ignored in this patch alone. > one more comment in V1 "+ cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x0>; Why do you have two address cells? A bit more complicated and not necessary, I think." the arm,cortex-a35 is 64 Bit this is why we use #address-cells = <2>; and therefore reg = <0x0 0x0>; > I'll stop reviewing, it is a waste of my time. > > NAK for this change. > > Best regards, > Krzysztof Again sorry to miss these comments in V1. Appreciate your time. Best regards, Tomer
Hi Tomer, On Fri, Jun 10, 2022 at 12:30 AM Tomer Maimon <tmaimon77@gmail.com> wrote: > On Wed, 8 Jun 2022 at 13:21, Krzysztof Kozlowski > <krzysztof.kozlowski@linaro.org> wrote: > > On 08/06/2022 11:56, Tomer Maimon wrote: > > > This adds initial device tree support for the > > > Nuvoton NPCM845 Board Management controller (BMC) SoC family. > > > > > > The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and > > > have various peripheral IPs. > > > > > > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi > > > @@ -0,0 +1,197 @@ > > > +// SPDX-License-Identifier: GPL-2.0 > > > +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com > > > + > > > +#include <dt-bindings/clock/nuvoton,npcm8xx-clock.h> > > > +#include <dt-bindings/interrupt-controller/arm-gic.h> > > > +#include <dt-bindings/interrupt-controller/irq.h> > > > + > > > +/ { > > > + #address-cells = <2>; > > > + #size-cells = <2>; > > > + interrupt-parent = <&gic>; > > > + > > > + /* external reference clock */ > > > + clk_refclk: clk-refclk { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <25000000>; > > > > Ignored comment. > Could we use it as a default clock-frequency? If the oscillator is present on the board, and not an SoC builtin, its clock frequency should be described in the board DTS. Some clocks may be optional, and left unpopulated. Others clocks may be fed with different frequencies than the default. > > > > > + clock-output-names = "refclk"; > > > + }; > > > + > > > + /* external reference clock for cpu. float in normal operation */ > > > + clk_sysbypck: clk-sysbypck { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <1000000000>; > > > > Ignored comment. > same as above > > > > > + clock-output-names = "sysbypck"; > > > + }; > > > + > > > + /* external reference clock for MC. float in normal operation */ > > > + clk_mcbypck: clk-mcbypck { > > > + compatible = "fixed-clock"; > > > + #clock-cells = <0>; > > > + clock-frequency = <1050000000>; > same as above > > > + clock-output-names = "mcbypck"; > > > + }; > "+ cpu0: cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a35"; > + clocks = <&clk NPCM8XX_CLK_CPU>; > + reg = <0x0 0x0>; > Why do you have two address cells? A bit more complicated and not > necessary, I think." > the arm,cortex-a35 is 64 Bit this is why we use #address-cells = <2>; > and therefore reg = <0x0 0x0>; These addresses are not addresses on the main memory bus (which is indeed 64-bit), but on the logical CPU bus. Now, Documentation/devicetree/bindings/arm/cpus.yaml says you can have #address-cells = <2> if you have non-zero MPIDR_EL1 high bits. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On 10/06/2022 00:29, Tomer Maimon wrote: >>> + clk_refclk: clk-refclk { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <25000000>; >> >> Ignored comment. > Could we use it as a default clock-frequency? In DTS? If my assumption, that this clock is not on SoC itself, is correct, then the answer is no, you cannot. The clock physically sits on the board, so it is defined by board DTS. Feel free to embed in SoC DTSI most of the clock properties, but the core property - frequency - must be outside. >> >>> + clock-output-names = "refclk"; >>> + }; >>> + >>> + /* external reference clock for cpu. float in normal operation */ >>> + clk_sysbypck: clk-sysbypck { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <1000000000>; >> >> Ignored comment. > same as above >> >>> + clock-output-names = "sysbypck"; >>> + }; >>> + >>> + /* external reference clock for MC. float in normal operation */ >>> + clk_mcbypck: clk-mcbypck { >>> + compatible = "fixed-clock"; >>> + #clock-cells = <0>; >>> + clock-frequency = <1050000000>; > same as above >>> + clock-output-names = "mcbypck"; >>> + }; >>> + >>> + soc { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + compatible = "simple-bus"; >>> + interrupt-parent = <&gic>; >>> + ranges; >>> + >>> + gcr: gcr@f0800000 { > I understand it sounds generic but I try to be as much compatible with NPCM7XX > https://elixir.bootlin.com/linux/v5.19-rc1/source/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi#L91 Then fix NPCM7XX. Please do not multiple bad choices because it looks similar. Fix the other wrong one. >> >> Ignored comment. >> >>> + compatible = "nuvoton,npcm845-gcr", "syscon", >>> + "simple-mfd"; >> >> This is not a simple-mfd... I see original bindings defined it that way, >> but why? I think they should be corrected - remove simple-mfd from the >> bindings and DTS. > will remove in both places in V3 >> >> >>> + reg = <0x0 0xf0800000 0x0 0x1000>; >>> + }; >>> + >>> + gic: interrupt-controller@dfff9000 { >>> + compatible = "arm,gic-400"; >>> + reg = <0x0 0xdfff9000 0x0 0x1000>, >>> + <0x0 0xdfffa000 0x0 0x2000>, >>> + <0x0 0xdfffc000 0x0 0x2000>, >>> + <0x0 0xdfffe000 0x0 0x2000>; >>> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; >>> + #interrupt-cells = <3>; >>> + interrupt-controller; >>> + #address-cells = <0>; >>> + ppi-partitions { >>> + ppi_cluster0: interrupt-partition-0 { >>> + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; >>> + }; >>> + }; >>> + }; >>> + }; >>> + >>> + ahb { >>> + #address-cells = <2>; >>> + #size-cells = <2>; >>> + compatible = "simple-bus"; >>> + interrupt-parent = <&gic>; > >>> + ranges; >>> + >>> + rstc: rstc@f0801000 { >> >> Ignored comment. >> > I understand it sounds generic but I try to be as much compatible with NPCM7XX > https://elixir.bootlin.com/linux/v5.19-rc1/source/arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi#L109 Fix 7xx. Best regards, Krzysztof
On 10/06/2022 09:57, Geert Uytterhoeven wrote: >> "+ cpu0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a35"; >> + clocks = <&clk NPCM8XX_CLK_CPU>; >> + reg = <0x0 0x0>; >> Why do you have two address cells? A bit more complicated and not >> necessary, I think." >> the arm,cortex-a35 is 64 Bit this is why we use #address-cells = <2>; >> and therefore reg = <0x0 0x0>; > > These addresses are not addresses on the main memory bus (which > is indeed 64-bit), but on the logical CPU bus. > Now, Documentation/devicetree/bindings/arm/cpus.yaml says you can > have #address-cells = <2> if you have non-zero MPIDR_EL1 high bits. > Thanks Tomer and Geert for explanation. OK for me. Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 1ba04e31a438..7b107fa7414b 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -19,6 +19,7 @@ subdir-y += lg subdir-y += marvell subdir-y += mediatek subdir-y += microchip +subdir-y += nuvoton subdir-y += nvidia subdir-y += qcom subdir-y += realtek diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi new file mode 100644 index 000000000000..97e108c50760 --- /dev/null +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi @@ -0,0 +1,197 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com + +#include <dt-bindings/clock/nuvoton,npcm8xx-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&gic>; + + /* external reference clock */ + clk_refclk: clk-refclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "refclk"; + }; + + /* external reference clock for cpu. float in normal operation */ + clk_sysbypck: clk-sysbypck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-output-names = "sysbypck"; + }; + + /* external reference clock for MC. float in normal operation */ + clk_mcbypck: clk-mcbypck { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1050000000>; + clock-output-names = "mcbypck"; + }; + + soc { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + gcr: gcr@f0800000 { + compatible = "nuvoton,npcm845-gcr", "syscon", + "simple-mfd"; + reg = <0x0 0xf0800000 0x0 0x1000>; + }; + + gic: interrupt-controller@dfff9000 { + compatible = "arm,gic-400"; + reg = <0x0 0xdfff9000 0x0 0x1000>, + <0x0 0xdfffa000 0x0 0x2000>, + <0x0 0xdfffc000 0x0 0x2000>, + <0x0 0xdfffe000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + #interrupt-cells = <3>; + interrupt-controller; + #address-cells = <0>; + ppi-partitions { + ppi_cluster0: interrupt-partition-0 { + affinity = <&cpu0 &cpu1 &cpu2 &cpu3>; + }; + }; + }; + }; + + ahb { + #address-cells = <2>; + #size-cells = <2>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + rstc: rstc@f0801000 { + compatible = "nuvoton,npcm845-reset"; + reg = <0x0 0xf0801000 0x0 0x78>; + #reset-cells = <2>; + nuvoton,sysgcr = <&gcr>; + }; + + clk: clock-controller@f0801000 { + compatible = "nuvoton,npcm845-clk"; + #clock-cells = <1>; + reg = <0x0 0xf0801000 0x0 0x1000>; + clock-names = "refclk", "sysbypck", "mcbypck"; + clocks = <&clk_refclk>, <&clk_sysbypck>, <&clk_mcbypck>; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0x0 0x0 0xf0000000 0x00300000>, + <0xfff00000 0x0 0xfff00000 0x00016000>; + + timer0: timer@8000 { + compatible = "nuvoton,npcm845-timer"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x8000 0x1C>; + clocks = <&clk_refclk>; + clock-names = "refclk"; + }; + + serial0: serial@0 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x0 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial1: serial@1000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x1000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial2: serial@2000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x2000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial3: serial@3000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x3000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial4: serial@4000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x4000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial5: serial@5000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x5000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + serial6: serial@6000 { + compatible = "nuvoton,npcm845-uart", "nuvoton,npcm750-uart"; + reg = <0x6000 0x1000>; + clocks = <&clk NPCM8XX_CLK_UART>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + status = "disabled"; + }; + + watchdog0: watchdog@801c { + compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x801c 0x4>; + status = "disabled"; + clocks = <&clk_refclk>; + syscon = <&gcr>; + }; + + watchdog1: watchdog@901c { + compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x901c 0x4>; + status = "disabled"; + clocks = <&clk_refclk>; + syscon = <&gcr>; + }; + + watchdog2: watchdog@a01c { + compatible = "nuvoton,npcm845-wdt", "nuvoton,npcm750-wdt"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + reg = <0xa01c 0x4>; + status = "disabled"; + clocks = <&clk_refclk>; + syscon = <&gcr>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi new file mode 100644 index 000000000000..12118b75c0e6 --- /dev/null +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021 Nuvoton Technology tomer.maimon@nuvoton.com + +#include "nuvoton-common-npcm8xx.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x0>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x1>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x2>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + clocks = <&clk NPCM8XX_CLK_CPU>; + reg = <0x0 0x3>; + next-level-cache = <&l2>; + enable-method = "psci"; + }; + + l2: l2-cache { + compatible = "cache"; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a35-pmu"; + interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +};
This adds initial device tree support for the Nuvoton NPCM845 Board Management controller (BMC) SoC family. The NPCM845 based quad-core Cortex-A35 ARMv8 architecture and have various peripheral IPs. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> --- arch/arm64/boot/dts/Makefile | 1 + .../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 197 ++++++++++++++++++ .../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 +++++++ 3 files changed, 274 insertions(+) create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi