| Message ID | 20220516134734.493065-1-marcel@ziswiler.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | ARM: dts: imx7-colibri: device tree improvements | expand |
On Mon, May 16, 2022 at 03:47:10PM +0200, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > This is a general update of the Colibri iMX7 device tree files. > > The Toradex Colibri family is composed of a SoM that can be plugged on > various carrier boards, with carrier boards allowing multiple optional > accessories (e.g. display, camera, ...). > > The device tree sources are structured into a SoM dtsi and a carrier dts > which then includes the SoM dtsi. The SoM dtsi defines and enables the > functionality self-contained on the SoM and prepares for the > functionality provided by the carrier HW or accessories so that the > carrier dts then can enable or amend nodes provided. Accessories are > enabled in overlays depending on HW configuration. > > Please find the following colibri-imx7 device trees improvements: > > - Display/Touch Functionality Overhaul > Rename display interface to match other modules to make it easier to > use device tree overlays. > The parallel RGB interface (lcdif) and all related stuff turn on in a > device tree overlay. Keep them disabled in the main devicetree. > As these subsystems are provided by module and not a part of boards, > move their definitions into the module-level devicetree. > Disable ad7879 touchscreen which turns on in a devic tree overlay. > Remains it disabled in the main devicetree. > The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT > peripherals available on the I2C bus for touchscreen events. Add > atmel_mxt_ts node to the module-level device tree. Also, provide pinmux > configuration for the INT/RST inputs from SODIMM pins 106/107 for most > carrier boards or an external touchscreen adapter inputs configured to > SODIMM pins 28/30. > > - Ethernet Improvements > Add the MDIO bus with the respective PHY. > Add Ethernet aliases which is required to properly pass MAC address > from bootloader. > Add delay for on-module phy supply. > > - USB Device/Host Switching > Add usb dual-role switching using extcon. > > - MMC/SD > The original Colibri specification only defined 3.3 volt TTL signaling > and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines. > The latest carrier boards like Iris V2 on the other hand are now UHS-I > compliant by leaving such external on-carrier pull-ups away relying on > module- or even SoC-level ones which pull up to resp. signaling voltage. > In such cases, the carrier board-level device tree may explicitly delete > the no-1-8-v property to enable full UHS-I support. > Also, fix SD/MMC regulator for the carrier boards using UHS-I modes. > > - Add Iris and Iris V2 Carrier Board Device Trees > Add support for Toradex Iris carrier boards. > > Changes in v2: > - Add Krzysztof's acked-by. Thanks! > - Revert change on arch/arm/boot/dts/imx6dl-colibri-iris.dts which > slipped into this patch set by error. > - Re-based on top of Shawn's for-next. > > Marcel Ziswiler (18): > ARM: dts: imx7-colibri: overhaul display/touch functionality > ARM: dts: imx7-colibri: add mdio phy node > ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys > ARM: dts: imx7-colibri: move regulators > ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep config > ARM: dts: imx7-colibri: move rtc node > ARM: dts: imx7d-colibri-emmc: add cpu1 supply > ARM: dts: imx7-colibri-eval-v3: correct can controller comment > ARM: dts: imx7-colibri: disable adc2 > ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pins > ARM: dts: imx7-colibri: add clarifying comments > ARM: dts: imx7-colibri: alphabetical re-order > ARM: dts: imx7-colibri: clean-up device enabling/disabling > ARM: dts: imx7-colibri: remove leading zero from reg address > ARM: dts: imx7-colibri: set regulator-name properties > ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group naming > dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2 > ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards > > Max Krummenacher (1): > ARM: dts: imx7-colibri: add ethernet aliases > > Oleksandr Suvorov (3): > ARM: dts: imx7-colibri: improve licensing and compatible strings > ARM: dts: imx7-colibri: improve wake-up with gpio key > ARM: dts: imx7-colibri: add delay for on-module phy supply > > Philippe Schenker (1): > ARM: dts: imx7-colibri: add usb dual-role switching using extcon > > Stefan Agner (1): > ARM: dts: imx7-colibri: set lcdif clock source to video pll Applied all, thanks!
On Sat, Jun 11, 2022 at 3:16 AM Shawn Guo <shawnguo@kernel.org> wrote: > > On Mon, May 16, 2022 at 03:47:10PM +0200, Marcel Ziswiler wrote: > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > This is a general update of the Colibri iMX7 device tree files. > > > > The Toradex Colibri family is composed of a SoM that can be plugged on > > various carrier boards, with carrier boards allowing multiple optional > > accessories (e.g. display, camera, ...). > > > > The device tree sources are structured into a SoM dtsi and a carrier dts > > which then includes the SoM dtsi. The SoM dtsi defines and enables the > > functionality self-contained on the SoM and prepares for the > > functionality provided by the carrier HW or accessories so that the > > carrier dts then can enable or amend nodes provided. Accessories are > > enabled in overlays depending on HW configuration. > > > > Please find the following colibri-imx7 device trees improvements: > > > > - Display/Touch Functionality Overhaul > > Rename display interface to match other modules to make it easier to > > use device tree overlays. > > The parallel RGB interface (lcdif) and all related stuff turn on in a > > device tree overlay. Keep them disabled in the main devicetree. > > As these subsystems are provided by module and not a part of boards, > > move their definitions into the module-level devicetree. > > Disable ad7879 touchscreen which turns on in a devic tree overlay. > > Remains it disabled in the main devicetree. > > The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT > > peripherals available on the I2C bus for touchscreen events. Add > > atmel_mxt_ts node to the module-level device tree. Also, provide pinmux > > configuration for the INT/RST inputs from SODIMM pins 106/107 for most > > carrier boards or an external touchscreen adapter inputs configured to > > SODIMM pins 28/30. > > > > - Ethernet Improvements > > Add the MDIO bus with the respective PHY. > > Add Ethernet aliases which is required to properly pass MAC address > > from bootloader. > > Add delay for on-module phy supply. > > > > - USB Device/Host Switching > > Add usb dual-role switching using extcon. > > > > - MMC/SD > > The original Colibri specification only defined 3.3 volt TTL signaling > > and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines. > > The latest carrier boards like Iris V2 on the other hand are now UHS-I > > compliant by leaving such external on-carrier pull-ups away relying on > > module- or even SoC-level ones which pull up to resp. signaling voltage. > > In such cases, the carrier board-level device tree may explicitly delete > > the no-1-8-v property to enable full UHS-I support. > > Also, fix SD/MMC regulator for the carrier boards using UHS-I modes. > > > > - Add Iris and Iris V2 Carrier Board Device Trees > > Add support for Toradex Iris carrier boards. > > > > Changes in v2: > > - Add Krzysztof's acked-by. Thanks! > > - Revert change on arch/arm/boot/dts/imx6dl-colibri-iris.dts which > > slipped into this patch set by error. > > - Re-based on top of Shawn's for-next. > > > > Marcel Ziswiler (18): > > ARM: dts: imx7-colibri: overhaul display/touch functionality > > ARM: dts: imx7-colibri: add mdio phy node > > ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys > > ARM: dts: imx7-colibri: move regulators > > ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep config > > ARM: dts: imx7-colibri: move rtc node > > ARM: dts: imx7d-colibri-emmc: add cpu1 supply > > ARM: dts: imx7-colibri-eval-v3: correct can controller comment > > ARM: dts: imx7-colibri: disable adc2 > > ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pins > > ARM: dts: imx7-colibri: add clarifying comments > > ARM: dts: imx7-colibri: alphabetical re-order > > ARM: dts: imx7-colibri: clean-up device enabling/disabling > > ARM: dts: imx7-colibri: remove leading zero from reg address > > ARM: dts: imx7-colibri: set regulator-name properties > > ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group naming > > dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2 > > ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards > > > > Max Krummenacher (1): > > ARM: dts: imx7-colibri: add ethernet aliases > > > > Oleksandr Suvorov (3): > > ARM: dts: imx7-colibri: improve licensing and compatible strings > > ARM: dts: imx7-colibri: improve wake-up with gpio key > > ARM: dts: imx7-colibri: add delay for on-module phy supply > > > > Philippe Schenker (1): > > ARM: dts: imx7-colibri: add usb dual-role switching using extcon > > > > Stefan Agner (1): > > ARM: dts: imx7-colibri: set lcdif clock source to video pll > > Applied all, thanks! Not completely sure, but I think this series adds a warning to linux-next: ./Documentation/devicetree/bindings/arm/fsl.yaml:684:111: [warning] line too long (111 > 110 characters) (line-length)
On Tue, Jun 14, 2022 at 09:00:26AM -0600, Rob Herring wrote: > On Sat, Jun 11, 2022 at 3:16 AM Shawn Guo <shawnguo@kernel.org> wrote: > > > > On Mon, May 16, 2022 at 03:47:10PM +0200, Marcel Ziswiler wrote: > > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > > > > This is a general update of the Colibri iMX7 device tree files. ... > > Applied all, thanks! > > Not completely sure, but I think this series adds a warning to linux-next: > > ./Documentation/devicetree/bindings/arm/fsl.yaml:684:111: [warning] > line too long (111 > 110 characters) (line-length) The warning is from bb0fa1533715 ("dt-bindings: arm: fsl: correct 1g vs. 1gb in toradex,colibri-imx6ull-*") that is already merged in master/torvalds, not related to this series. We (Toradex) introduced it, and I guess we can easily fix it, Marcel? We'll send a patch. Francesco
On Tue, Jun 14, 2022 at 09:00:26AM -0600, Rob Herring wrote: > On Sat, Jun 11, 2022 at 3:16 AM Shawn Guo <shawnguo@kernel.org> wrote: > > > > On Mon, May 16, 2022 at 03:47:10PM +0200, Marcel Ziswiler wrote: > > > From: Marcel Ziswiler <marcel.ziswiler@toradex.com> > > > > > > > > > This is a general update of the Colibri iMX7 device tree files. > > > > > > The Toradex Colibri family is composed of a SoM that can be plugged on > > > various carrier boards, with carrier boards allowing multiple optional > > > accessories (e.g. display, camera, ...). > > > > > > The device tree sources are structured into a SoM dtsi and a carrier dts > > > which then includes the SoM dtsi. The SoM dtsi defines and enables the > > > functionality self-contained on the SoM and prepares for the > > > functionality provided by the carrier HW or accessories so that the > > > carrier dts then can enable or amend nodes provided. Accessories are > > > enabled in overlays depending on HW configuration. > > > > > > Please find the following colibri-imx7 device trees improvements: > > > > > > - Display/Touch Functionality Overhaul > > > Rename display interface to match other modules to make it easier to > > > use device tree overlays. > > > The parallel RGB interface (lcdif) and all related stuff turn on in a > > > device tree overlay. Keep them disabled in the main devicetree. > > > As these subsystems are provided by module and not a part of boards, > > > move their definitions into the module-level devicetree. > > > Disable ad7879 touchscreen which turns on in a devic tree overlay. > > > Remains it disabled in the main devicetree. > > > The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT > > > peripherals available on the I2C bus for touchscreen events. Add > > > atmel_mxt_ts node to the module-level device tree. Also, provide pinmux > > > configuration for the INT/RST inputs from SODIMM pins 106/107 for most > > > carrier boards or an external touchscreen adapter inputs configured to > > > SODIMM pins 28/30. > > > > > > - Ethernet Improvements > > > Add the MDIO bus with the respective PHY. > > > Add Ethernet aliases which is required to properly pass MAC address > > > from bootloader. > > > Add delay for on-module phy supply. > > > > > > - USB Device/Host Switching > > > Add usb dual-role switching using extcon. > > > > > > - MMC/SD > > > The original Colibri specification only defined 3.3 volt TTL signaling > > > and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines. > > > The latest carrier boards like Iris V2 on the other hand are now UHS-I > > > compliant by leaving such external on-carrier pull-ups away relying on > > > module- or even SoC-level ones which pull up to resp. signaling voltage. > > > In such cases, the carrier board-level device tree may explicitly delete > > > the no-1-8-v property to enable full UHS-I support. > > > Also, fix SD/MMC regulator for the carrier boards using UHS-I modes. > > > > > > - Add Iris and Iris V2 Carrier Board Device Trees > > > Add support for Toradex Iris carrier boards. > > > > > > Changes in v2: > > > - Add Krzysztof's acked-by. Thanks! > > > - Revert change on arch/arm/boot/dts/imx6dl-colibri-iris.dts which > > > slipped into this patch set by error. > > > - Re-based on top of Shawn's for-next. > > > > > > Marcel Ziswiler (18): > > > ARM: dts: imx7-colibri: overhaul display/touch functionality > > > ARM: dts: imx7-colibri: add mdio phy node > > > ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys > > > ARM: dts: imx7-colibri: move regulators > > > ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep config > > > ARM: dts: imx7-colibri: move rtc node > > > ARM: dts: imx7d-colibri-emmc: add cpu1 supply > > > ARM: dts: imx7-colibri-eval-v3: correct can controller comment > > > ARM: dts: imx7-colibri: disable adc2 > > > ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pins > > > ARM: dts: imx7-colibri: add clarifying comments > > > ARM: dts: imx7-colibri: alphabetical re-order > > > ARM: dts: imx7-colibri: clean-up device enabling/disabling > > > ARM: dts: imx7-colibri: remove leading zero from reg address > > > ARM: dts: imx7-colibri: set regulator-name properties > > > ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group naming > > > dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2 > > > ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards > > > > > > Max Krummenacher (1): > > > ARM: dts: imx7-colibri: add ethernet aliases > > > > > > Oleksandr Suvorov (3): > > > ARM: dts: imx7-colibri: improve licensing and compatible strings > > > ARM: dts: imx7-colibri: improve wake-up with gpio key > > > ARM: dts: imx7-colibri: add delay for on-module phy supply > > > > > > Philippe Schenker (1): > > > ARM: dts: imx7-colibri: add usb dual-role switching using extcon > > > > > > Stefan Agner (1): > > > ARM: dts: imx7-colibri: set lcdif clock source to video pll > > > > Applied all, thanks! > > Not completely sure, but I think this series adds a warning to linux-next: > > ./Documentation/devicetree/bindings/arm/fsl.yaml:684:111: [warning] > line too long (111 > 110 characters) (line-length) Thanks for spotting it, Rob! It seems to be another separate patch [1]. I will fix it. Shawn [1] https://lore.kernel.org/linux-arm-kernel/20220506145720.291735-1-marcel@ziswiler.com/
From: Marcel Ziswiler <marcel.ziswiler@toradex.com> This is a general update of the Colibri iMX7 device tree files. The Toradex Colibri family is composed of a SoM that can be plugged on various carrier boards, with carrier boards allowing multiple optional accessories (e.g. display, camera, ...). The device tree sources are structured into a SoM dtsi and a carrier dts which then includes the SoM dtsi. The SoM dtsi defines and enables the functionality self-contained on the SoM and prepares for the functionality provided by the carrier HW or accessories so that the carrier dts then can enable or amend nodes provided. Accessories are enabled in overlays depending on HW configuration. Please find the following colibri-imx7 device trees improvements: - Display/Touch Functionality Overhaul Rename display interface to match other modules to make it easier to use device tree overlays. The parallel RGB interface (lcdif) and all related stuff turn on in a device tree overlay. Keep them disabled in the main devicetree. As these subsystems are provided by module and not a part of boards, move their definitions into the module-level devicetree. Disable ad7879 touchscreen which turns on in a devic tree overlay. Remains it disabled in the main devicetree. The Toradex 7" Capacitive and 10" LVDS touch screens are Atmel MXT peripherals available on the I2C bus for touchscreen events. Add atmel_mxt_ts node to the module-level device tree. Also, provide pinmux configuration for the INT/RST inputs from SODIMM pins 106/107 for most carrier boards or an external touchscreen adapter inputs configured to SODIMM pins 28/30. - Ethernet Improvements Add the MDIO bus with the respective PHY. Add Ethernet aliases which is required to properly pass MAC address from bootloader. Add delay for on-module phy supply. - USB Device/Host Switching Add usb dual-role switching using extcon. - MMC/SD The original Colibri specification only defined 3.3 volt TTL signaling and relied on external on-carrier pull-ups for the SD_DATA[0..3] lines. The latest carrier boards like Iris V2 on the other hand are now UHS-I compliant by leaving such external on-carrier pull-ups away relying on module- or even SoC-level ones which pull up to resp. signaling voltage. In such cases, the carrier board-level device tree may explicitly delete the no-1-8-v property to enable full UHS-I support. Also, fix SD/MMC regulator for the carrier boards using UHS-I modes. - Add Iris and Iris V2 Carrier Board Device Trees Add support for Toradex Iris carrier boards. Changes in v2: - Add Krzysztof's acked-by. Thanks! - Revert change on arch/arm/boot/dts/imx6dl-colibri-iris.dts which slipped into this patch set by error. - Re-based on top of Shawn's for-next. Marcel Ziswiler (18): ARM: dts: imx7-colibri: overhaul display/touch functionality ARM: dts: imx7-colibri: add mdio phy node ARM: dts: imx7-colibri: move aliases, chosen, extcon and gpio-keys ARM: dts: imx7-colibri: move regulators ARM: dts: imx7-colibri: clean-up usdhc1 and add sleep config ARM: dts: imx7-colibri: move rtc node ARM: dts: imx7d-colibri-emmc: add cpu1 supply ARM: dts: imx7-colibri-eval-v3: correct can controller comment ARM: dts: imx7-colibri: disable adc2 ARM: dts: imx7-colibri-aster: add ssp aka spi cs aka ss pins ARM: dts: imx7-colibri: add clarifying comments ARM: dts: imx7-colibri: alphabetical re-order ARM: dts: imx7-colibri: clean-up device enabling/disabling ARM: dts: imx7-colibri: remove leading zero from reg address ARM: dts: imx7-colibri: set regulator-name properties ARM: dts: imx7-colibri: clean-up iomuxc pinctrl group naming dt-bindings: arm: fsl: add toradex,colibri-imx7s/d/d-emmc-iris/-v2 ARM: dts: imx7-colibri: add support for Toradex Iris carrier boards Max Krummenacher (1): ARM: dts: imx7-colibri: add ethernet aliases Oleksandr Suvorov (3): ARM: dts: imx7-colibri: improve licensing and compatible strings ARM: dts: imx7-colibri: improve wake-up with gpio key ARM: dts: imx7-colibri: add delay for on-module phy supply Philippe Schenker (1): ARM: dts: imx7-colibri: add usb dual-role switching using extcon Stefan Agner (1): ARM: dts: imx7-colibri: set lcdif clock source to video pll .../devicetree/bindings/arm/fsl.yaml | 6 + arch/arm/boot/dts/Makefile | 6 + arch/arm/boot/dts/imx7-colibri-aster.dtsi | 142 +-- arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 156 +--- arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi | 112 +++ arch/arm/boot/dts/imx7-colibri-iris.dtsi | 108 +++ arch/arm/boot/dts/imx7-colibri.dtsi | 830 +++++++++++------- arch/arm/boot/dts/imx7d-colibri-aster.dts | 30 +- .../arm/boot/dts/imx7d-colibri-emmc-aster.dts | 10 +- .../boot/dts/imx7d-colibri-emmc-eval-v3.dts | 10 +- .../boot/dts/imx7d-colibri-emmc-iris-v2.dts | 21 + arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts | 21 + arch/arm/boot/dts/imx7d-colibri-emmc.dtsi | 17 +- arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 45 +- arch/arm/boot/dts/imx7d-colibri-iris-v2.dts | 83 ++ arch/arm/boot/dts/imx7d-colibri-iris.dts | 56 ++ arch/arm/boot/dts/imx7d-colibri.dtsi | 13 +- arch/arm/boot/dts/imx7s-colibri-aster.dts | 27 +- arch/arm/boot/dts/imx7s-colibri-eval-v3.dts | 43 +- arch/arm/boot/dts/imx7s-colibri-iris-v2.dts | 78 ++ arch/arm/boot/dts/imx7s-colibri-iris.dts | 51 ++ arch/arm/boot/dts/imx7s-colibri.dtsi | 5 +- 22 files changed, 1291 insertions(+), 579 deletions(-) create mode 100644 arch/arm/boot/dts/imx7-colibri-iris-v2.dtsi create mode 100644 arch/arm/boot/dts/imx7-colibri-iris.dtsi create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx7d-colibri-emmc-iris.dts create mode 100644 arch/arm/boot/dts/imx7d-colibri-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx7d-colibri-iris.dts create mode 100644 arch/arm/boot/dts/imx7s-colibri-iris-v2.dts create mode 100644 arch/arm/boot/dts/imx7s-colibri-iris.dts