diff mbox series

remoteproc: omap_remoteproc: Fix typo in comment

Message ID 20220608130406.46005-1-wangxiang@cdjrlc.com (mailing list archive)
State Accepted
Headers show
Series remoteproc: omap_remoteproc: Fix typo in comment | expand

Commit Message

Xiang wangx June 8, 2022, 1:04 p.m. UTC
Delete the redundant word 'The'.
Delete the redundant word 'to'.

Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
---
 drivers/remoteproc/omap_remoteproc.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Mathieu Poirier June 14, 2022, 11:09 p.m. UTC | #1
On Wed, 8 Jun 2022 at 07:04, Xiang wangx <wangxiang@cdjrlc.com> wrote:
>
> Delete the redundant word 'The'.
> Delete the redundant word 'to'.
>
> Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
> ---
>  drivers/remoteproc/omap_remoteproc.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
>

I have applied this patch.

Thanks,
Mathieu

> diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
> index 32a588fefbdc..430fab0266ed 100644
> --- a/drivers/remoteproc/omap_remoteproc.c
> +++ b/drivers/remoteproc/omap_remoteproc.c
> @@ -243,7 +243,7 @@ static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
>   * omap_rproc_ack_timer_irq() - acknowledge a timer irq
>   * @timer: handle to a OMAP rproc timer
>   *
> - * This function is used to clear the irq associated with a watchdog timer. The
> + * This function is used to clear the irq associated with a watchdog timer.
>   * The function is called by the OMAP remoteproc upon a watchdog event on the
>   * remote processor to clear the interrupt status of the watchdog timer.
>   */
> @@ -303,7 +303,7 @@ static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
>   * @configure: boolean flag used to acquire and configure the timer handle
>   *
>   * This function is used primarily to enable the timers associated with
> - * a remoteproc. The configure flag is provided to allow the driver to
> + * a remoteproc. The configure flag is provided to allow the driver
>   * to either acquire and start a timer (during device initialization) or
>   * to just start a timer (during a resume operation).
>   *
> @@ -443,7 +443,7 @@ static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
>   * @configure: boolean flag used to release the timer handle
>   *
>   * This function is used primarily to disable the timers associated with
> - * a remoteproc. The configure flag is provided to allow the driver to
> + * a remoteproc. The configure flag is provided to allow the driver
>   * to either stop and release a timer (during device shutdown) or to just
>   * stop a timer (during a suspend operation).
>   *
> --
> 2.36.1
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
index 32a588fefbdc..430fab0266ed 100644
--- a/drivers/remoteproc/omap_remoteproc.c
+++ b/drivers/remoteproc/omap_remoteproc.c
@@ -243,7 +243,7 @@  static inline int omap_rproc_get_timer_irq(struct omap_rproc_timer *timer)
  * omap_rproc_ack_timer_irq() - acknowledge a timer irq
  * @timer: handle to a OMAP rproc timer
  *
- * This function is used to clear the irq associated with a watchdog timer. The
+ * This function is used to clear the irq associated with a watchdog timer.
  * The function is called by the OMAP remoteproc upon a watchdog event on the
  * remote processor to clear the interrupt status of the watchdog timer.
  */
@@ -303,7 +303,7 @@  static irqreturn_t omap_rproc_watchdog_isr(int irq, void *data)
  * @configure: boolean flag used to acquire and configure the timer handle
  *
  * This function is used primarily to enable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
  * to either acquire and start a timer (during device initialization) or
  * to just start a timer (during a resume operation).
  *
@@ -443,7 +443,7 @@  static int omap_rproc_enable_timers(struct rproc *rproc, bool configure)
  * @configure: boolean flag used to release the timer handle
  *
  * This function is used primarily to disable the timers associated with
- * a remoteproc. The configure flag is provided to allow the driver to
+ * a remoteproc. The configure flag is provided to allow the driver
  * to either stop and release a timer (during device shutdown) or to just
  * stop a timer (during a suspend operation).
  *