diff mbox series

[3/6] arm64: dts: freescale: Add missing space around properties

Message ID 20220612223201.2740248-4-niklas.soderlund+renesas@ragnatech.se (mailing list archive)
State Not Applicable
Headers show
Series arm64: dts: Add missing space around properties | expand

Commit Message

Niklas Söderlund June 12, 2022, 10:31 p.m. UTC 
Add the missing space around properties before the typo spreads to other
files.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi            | 6 +++---
 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi           | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm.dtsi                 | 8 ++++----
 arch/arm64/boot/dts/freescale/imx8mn.dtsi                 | 8 ++++----
 arch/arm64/boot/dts/freescale/imx8mp.dtsi                 | 8 ++++----
 arch/arm64/boot/dts/freescale/imx8mq.dtsi                 | 2 +-
 .../arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi | 6 +++---
 arch/arm64/boot/dts/freescale/imx8ulp.dtsi                | 6 +++---
 8 files changed, 23 insertions(+), 23 deletions(-)

Comments

Krzysztof Kozlowski June 16, 2022, 12:15 a.m. UTC | #1 
On 12/06/2022 15:31, Niklas Söderlund wrote:
> Add the missing space around properties before the typo spreads to other
> files.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi            | 6 +++---
>  arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi           | 2 +-
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi                 | 8 ++++----
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi                 | 8 ++++----
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi                 | 8 ++++----
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi                 | 2 +-
>  .../arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi | 6 +++---
>  arch/arm64/boot/dts/freescale/imx8ulp.dtsi                | 6 +++---
>  8 files changed, 23 insertions(+), 23 deletions(-)

Please rebase on top of earlier patch:
https://lore.kernel.org/all/20220526204258.832179-1-krzysztof.kozlowski@linaro.org/


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 92465f7776035a14..d4b719c8a0b93faf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -120,13 +120,13 @@  pmu {
 	};
 
 	gic: interrupt-controller@6000000 {
-		compatible= "arm,gic-v3";
+		compatible = "arm,gic-v3";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
-		reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+		reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
 			<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
-		#interrupt-cells= <3>;
+		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
 					 IRQ_TYPE_LEVEL_LOW)>;
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index a79f42a9618ec55f..3e335b4664980189 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -54,7 +54,7 @@  usdhc2: mmc@5b020000 {
 		clock-names = "ipg", "per", "ahb";
 		power-domains = <&pd IMX_SC_R_SDHC_1>;
 		fsl,tuning-start-tap = <20>;
-		fsl,tuning-step= <2>;
+		fsl,tuning-step = <2>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 1bf070473829244d..eb02244fa55441be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -212,7 +212,7 @@  clk_ext3: clock-ext3 {
 	clk_ext4: clock-ext4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <133000000>;
+		clock-frequency = <133000000>;
 		clock-output-names = "clk_ext4";
 	};
 
@@ -995,7 +995,7 @@  usdhc1: mmc@30b40000 {
 					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -1009,7 +1009,7 @@  usdhc2: mmc@30b50000 {
 					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -1023,7 +1023,7 @@  usdhc3: mmc@30b60000 {
 					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index e41e1d56f980d511..130c6d90dd79bb4d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -212,7 +212,7 @@  clk_ext3: clock-ext3 {
 	clk_ext4: clock-ext4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <133000000>;
+		clock-frequency = <133000000>;
 		clock-output-names = "clk_ext4";
 	};
 
@@ -941,7 +941,7 @@  usdhc1: mmc@30b40000 {
 					 <&clk IMX8MN_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -955,7 +955,7 @@  usdhc2: mmc@30b50000 {
 					 <&clk IMX8MN_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -969,7 +969,7 @@  usdhc3: mmc@30b60000 {
 					 <&clk IMX8MN_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index d9542dfff83fba78..b2f4a5f1f73cbe15 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -195,7 +195,7 @@  clk_ext3: clock-ext3 {
 	clk_ext4: clock-ext4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <133000000>;
+		clock-frequency = <133000000>;
 		clock-output-names = "clk_ext4";
 	};
 
@@ -903,7 +903,7 @@  usdhc1: mmc@30b40000 {
 					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -917,7 +917,7 @@  usdhc2: mmc@30b50000 {
 					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -931,7 +931,7 @@  usdhc3: mmc@30b60000 {
 					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 49eadb081b19860e..0c74c2a4a40f7615 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -94,7 +94,7 @@  clk_ext3: clock-ext3 {
 	clk_ext4: clock-ext4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <133000000>;
+		clock-frequency = <133000000>;
 		clock-output-names = "clk_ext4";
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index 144fc9e82da751c6..e3f161a10448e007 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -38,17 +38,17 @@  rtc_i2c: rtc@68 {
 
 /* Colibri UART_B */
 &lpuart0 {
-	status= "okay";
+	status = "okay";
 };
 
 /* Colibri UART_C */
 &lpuart2 {
-	status= "okay";
+	status = "okay";
 };
 
 /* Colibri UART_A */
 &lpuart3 {
-	status= "okay";
+	status = "okay";
 };
 
 /* Colibri FastEthernet */
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 09f7364dd1d05a11..ba281e689cf6ed26 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -331,7 +331,7 @@  usdhc0: mmc@298d0000 {
 				clock-names = "ipg", "ahb", "per";
 				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -346,7 +346,7 @@  usdhc1: mmc@298e0000 {
 				clock-names = "ipg", "ahb", "per";
 				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};
@@ -361,7 +361,7 @@  usdhc2: mmc@298f0000 {
 				clock-names = "ipg", "ahb", "per";
 				power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
 				fsl,tuning-start-tap = <20>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				bus-width = <4>;
 				status = "disabled";
 			};