diff mbox series

[RESEND,v9,4/5] arm: dts: stih407-family: Harmonize DWC USB3 DT nodes name

Message ID 20220624141622.7149-5-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State New, archived
Headers show
Series dt-bindings: usb: Harmonize xHCI/EHCI/OHCI/DWC3 nodes name | expand

Commit Message

Serge Semin June 24, 2022, 2:16 p.m. UTC 
In accordance with the DWC USB3 bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
named.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
---
 arch/arm/boot/dts/stih407-family.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski June 24, 2022, 5:18 p.m. UTC | #1 
On 24/06/2022 16:16, Serge Semin wrote:
> In accordance with the DWC USB3 bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> named.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
> ---
>  arch/arm/boot/dts/stih407-family.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> index 1713f7878117..7ba528315dbe 100644
> --- a/arch/arm/boot/dts/stih407-family.dtsi
> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> @@ -725,7 +725,7 @@ st_dwc3: dwc3@8f94000 {
>  
>  			status = "disabled";
>  
> -			dwc3: dwc3@9900000 {
> +			dwc3: usb@9900000 {

This does not apply. What tree is it based on?


Best regards,
Krzysztof
Serge Semin June 24, 2022, 8:45 p.m. UTC | #2 
On Fri, Jun 24, 2022 at 07:18:57PM +0200, Krzysztof Kozlowski wrote:
> On 24/06/2022 16:16, Serge Semin wrote:
> > In accordance with the DWC USB3 bindings the corresponding node
> > name is suppose to comply with the Generic USB HCD DT schema, which
> > requires the USB nodes to have the name acceptable by the regexp:
> > "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> > named.
> > 
> > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> > Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
> > ---
> >  arch/arm/boot/dts/stih407-family.dtsi | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> > index 1713f7878117..7ba528315dbe 100644
> > --- a/arch/arm/boot/dts/stih407-family.dtsi
> > +++ b/arch/arm/boot/dts/stih407-family.dtsi
> > @@ -725,7 +725,7 @@ st_dwc3: dwc3@8f94000 {
> >  
> >  			status = "disabled";
> >  
> > -			dwc3: dwc3@9900000 {
> > +			dwc3: usb@9900000 {
> 

> This does not apply. What tree is it based on?

That's weird. The series has been rebased onto the mainline kernel v5.19-rc3.
Do you have the stih407 dtsi fixed on your local repo?

-Sergey

> 
> 
> Best regards,
> Krzysztof
Krzysztof Kozlowski June 26, 2022, 10:42 a.m. UTC | #3 
On 24/06/2022 22:45, Serge Semin wrote:
> On Fri, Jun 24, 2022 at 07:18:57PM +0200, Krzysztof Kozlowski wrote:
>> On 24/06/2022 16:16, Serge Semin wrote:
>>> In accordance with the DWC USB3 bindings the corresponding node
>>> name is suppose to comply with the Generic USB HCD DT schema, which
>>> requires the USB nodes to have the name acceptable by the regexp:
>>> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
>>> named.
>>>
>>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>>> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
>>> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
>>> ---
>>>  arch/arm/boot/dts/stih407-family.dtsi | 2 +-
>>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
>>> index 1713f7878117..7ba528315dbe 100644
>>> --- a/arch/arm/boot/dts/stih407-family.dtsi
>>> +++ b/arch/arm/boot/dts/stih407-family.dtsi
>>> @@ -725,7 +725,7 @@ st_dwc3: dwc3@8f94000 {
>>>  
>>>  			status = "disabled";
>>>  
>>> -			dwc3: dwc3@9900000 {
>>> +			dwc3: usb@9900000 {
>>
> 
>> This does not apply. What tree is it based on?
> 
> That's weird. The series has been rebased onto the mainline kernel v5.19-rc3.
> Do you have the stih407 dtsi fixed on your local repo?

It conflicts with my change:
https://lore.kernel.org/all/20220526203632.831039-1-krzysztof.kozlowski@linaro.org/

I'll apply with local fixups.


Best regards,
Krzysztof
Krzysztof Kozlowski June 26, 2022, 10:46 a.m. UTC | #4 
On 24/06/2022 16:16, Serge Semin wrote:
> In accordance with the DWC USB3 bindings the corresponding node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> named.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>

Thanks, applied.

Best regards,
Krzysztof
Serge Semin June 27, 2022, 9:55 p.m. UTC | #5 
On Sun, Jun 26, 2022 at 12:42:48PM +0200, Krzysztof Kozlowski wrote:
> On 24/06/2022 22:45, Serge Semin wrote:
> > On Fri, Jun 24, 2022 at 07:18:57PM +0200, Krzysztof Kozlowski wrote:
> >> On 24/06/2022 16:16, Serge Semin wrote:
> >>> In accordance with the DWC USB3 bindings the corresponding node
> >>> name is suppose to comply with the Generic USB HCD DT schema, which
> >>> requires the USB nodes to have the name acceptable by the regexp:
> >>> "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly
> >>> named.
> >>>
> >>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> >>> Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
> >>> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
> >>> ---
> >>>  arch/arm/boot/dts/stih407-family.dtsi | 2 +-
> >>>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>>
> >>> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> >>> index 1713f7878117..7ba528315dbe 100644
> >>> --- a/arch/arm/boot/dts/stih407-family.dtsi
> >>> +++ b/arch/arm/boot/dts/stih407-family.dtsi
> >>> @@ -725,7 +725,7 @@ st_dwc3: dwc3@8f94000 {
> >>>  
> >>>  			status = "disabled";
> >>>  
> >>> -			dwc3: dwc3@9900000 {
> >>> +			dwc3: usb@9900000 {
> >>
> > 
> >> This does not apply. What tree is it based on?
> > 
> > That's weird. The series has been rebased onto the mainline kernel v5.19-rc3.
> > Do you have the stih407 dtsi fixed on your local repo?
> 

> It conflicts with my change:
> https://lore.kernel.org/all/20220526203632.831039-1-krzysztof.kozlowski@linaro.org/
> 
> I'll apply with local fixups.

Ok. Thanks.

-Sergey

> 
> 
> Best regards,
> Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1713f7878117..7ba528315dbe 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -725,7 +725,7 @@  st_dwc3: dwc3@8f94000 {
 
 			status = "disabled";
 
-			dwc3: dwc3@9900000 {
+			dwc3: usb@9900000 {
 				compatible	= "snps,dwc3";
 				reg		= <0x09900000 0x100000>;
 				interrupts	= <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;