diff mbox series

[v3,39/40] ARM: dts: at91: correct gpio-keys properties

Message ID 20220616005333.18491-39-krzysztof.kozlowski@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series dt-bindings: input: gpio-keys: rework matching children | expand

Commit Message

Krzysztof Kozlowski June 16, 2022, 12:53 a.m. UTC 
gpio-keys children do not use unit addresses.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/boot/dts/at91-kizbox.dts             | 2 --
 arch/arm/boot/dts/at91-kizbox2-common.dtsi    | 2 --
 arch/arm/boot/dts/at91-kizboxmini-common.dtsi | 2 --
 arch/arm/boot/dts/at91-qil_a9260.dts          | 2 --
 arch/arm/boot/dts/at91-wb45n.dts              | 5 +----
 arch/arm/boot/dts/at91-wb50n.dts              | 8 ++------
 6 files changed, 3 insertions(+), 18 deletions(-)

Comments

Krzysztof Kozlowski June 27, 2022, 9:15 a.m. UTC | #1 
On Wed, 15 Jun 2022 17:53:32 -0700, Krzysztof Kozlowski wrote:
> gpio-keys children do not use unit addresses.
> 
> 

Applied, thanks!

[39/40] ARM: dts: at91: correct gpio-keys properties
        https://git.kernel.org/krzk/linux/c/fa8cc83a3bffaa868b789a424d5573b7901edd7c

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index 87e972eb2ba6..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -30,8 +30,6 @@  main_xtal {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button-reset {
 			label = "PB_RST";
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
index ed7146e23147..e5e21dff882f 100644
--- a/arch/arm/boot/dts/at91-kizbox2-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -33,8 +33,6 @@  main_xtal {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button-prog {
 			label = "PB_PROG";
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
index 8fb08e6fad7a..42640fe6b6d0 100644
--- a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -36,8 +36,6 @@  adc_op_clk {
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		key-prog {
 			label = "PB_PROG";
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index d09b3d15a828..9d26f9996348 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -198,8 +198,6 @@  user_led {
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		button-user {
 			label = "user_pb";
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
index 3e46b29412d1..ef73f727f7bd 100644
--- a/arch/arm/boot/dts/at91-wb45n.dts
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -14,11 +14,8 @@  / {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		irqbtn@18 {
-			reg = <18>;
+		button {
 			label = "IRQBTN";
 			linux,code = <99>;
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
index e2195bd3e4b4..ec2becf6133b 100644
--- a/arch/arm/boot/dts/at91-wb50n.dts
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -15,19 +15,15 @@  / {
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		btn0@10 {
-			reg = <10>;
+		button-0 {
 			label = "BTNESC";
 			linux,code = <1>; /* ESC button */
 			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 		};
 
-		irqbtn@31 {
-			reg = <31>;
+		button-1 {
 			label = "IRQBTN";
 			linux,code = <99>; /* SysReq button */
 			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;