Message ID | 42c542b53a1c8027b23a045045fbb7b34479913d.1656072500.git.geert+renesas@glider.be (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] drm/bridge: imx: i.MX8 bridge drivers should depend on ARCH_MXC | expand |
Hi, On 24/06/2022 14:10, Geert Uytterhoeven wrote: > The various Freescale i.MX8 display bridges are only present on > Freescale i.MX8 SoCs. Hence add a dependency on ARCH_MXC, to prevent > asking the user about these drivers when configuring a kernel without > i.MX SoC support. > > Fixes: e60c4354840b2fe8 ("drm/bridge: imx: Add LDB support for i.MX8qm") > Fixes: 3818715f62b42b5c ("drm/bridge: imx: Add LDB support for i.MX8qxp") > Fixes: 96988a526c97cfbe ("drm/bridge: imx: Add i.MX8qxp pixel link to DPI support") > Fixes: 1ec17c26bc06289d ("drm/bridge: imx: Add i.MX8qm/qxp display pixel link support") > Fixes: 93e163a9e0392aca ("drm/bridge: imx: Add i.MX8qm/qxp pixel combiner support") > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > Reviewed-by: Liu Ying <victor.liu@nxp.com> > --- > v2: > - s/i.MX8MP/i.MX8/, > - Add Reviewed-by. > --- > drivers/gpu/drm/bridge/imx/Kconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig > index 212a7b0e64fd8b5a..608f47f41bcd1c81 100644 > --- a/drivers/gpu/drm/bridge/imx/Kconfig > +++ b/drivers/gpu/drm/bridge/imx/Kconfig > @@ -1,3 +1,5 @@ > +if ARCH_MXC || COMPILE_TEST > + > config DRM_IMX8QM_LDB > tristate "Freescale i.MX8QM LVDS display bridge" > depends on OF > @@ -41,3 +43,5 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI > help > Choose this to enable pixel link to display pixel interface(PXL2DPI) > found in Freescale i.MX8qxp processor. > + > +endif # ARCH_MXC || COMPILE_TEST I was wondering why those were added in drivers/gpu/drm/bridge/imx since they are specific to NXP SoCs, I think they should be moved in the right drm imx subsystem instead of this change. Neil
On Mon, 2022-06-27 at 14:22 +0200, Neil Armstrong wrote: > Hi, Hi, > > On 24/06/2022 14:10, Geert Uytterhoeven wrote: > > The various Freescale i.MX8 display bridges are only present on > > Freescale i.MX8 SoCs. Hence add a dependency on ARCH_MXC, to > > prevent > > asking the user about these drivers when configuring a kernel > > without > > i.MX SoC support. > > > > Fixes: e60c4354840b2fe8 ("drm/bridge: imx: Add LDB support for > > i.MX8qm") > > Fixes: 3818715f62b42b5c ("drm/bridge: imx: Add LDB support for > > i.MX8qxp") > > Fixes: 96988a526c97cfbe ("drm/bridge: imx: Add i.MX8qxp pixel link > > to DPI support") > > Fixes: 1ec17c26bc06289d ("drm/bridge: imx: Add i.MX8qm/qxp display > > pixel link support") > > Fixes: 93e163a9e0392aca ("drm/bridge: imx: Add i.MX8qm/qxp pixel > > combiner support") > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > Reviewed-by: Liu Ying <victor.liu@nxp.com> > > --- > > v2: > > - s/i.MX8MP/i.MX8/, > > - Add Reviewed-by. > > --- > > drivers/gpu/drm/bridge/imx/Kconfig | 4 ++++ > > 1 file changed, 4 insertions(+) > > > > diff --git a/drivers/gpu/drm/bridge/imx/Kconfig > > b/drivers/gpu/drm/bridge/imx/Kconfig > > index 212a7b0e64fd8b5a..608f47f41bcd1c81 100644 > > --- a/drivers/gpu/drm/bridge/imx/Kconfig > > +++ b/drivers/gpu/drm/bridge/imx/Kconfig > > @@ -1,3 +1,5 @@ > > +if ARCH_MXC || COMPILE_TEST > > + > > config DRM_IMX8QM_LDB > > tristate "Freescale i.MX8QM LVDS display bridge" > > depends on OF > > @@ -41,3 +43,5 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI > > help > > Choose this to enable pixel link to display pixel > > interface(PXL2DPI) > > found in Freescale i.MX8qxp processor. > > + > > +endif # ARCH_MXC || COMPILE_TEST > > I was wondering why those were added in drivers/gpu/drm/bridge/imx > since they are specific to NXP SoCs, > I think they should be moved in the right drm imx subsystem instead > of this change. There are 2 directories which contain display controller drivers for i.MX SoCs: a. drivers/gpu/drm/imx - i.MX51/53/6qdl IPUv3, i.MX8mq DCSS and i.MX8qm/qxp DPU([1], not landed yet) b. drivers/gpu/drm/mxsfb - i.MX23/28/6sx/8mq LCDIF and i.MX8mp LCDIFv3([2], not landed yet) Bridges added in drivers/gpu/drm/bridge/imx make it possible to share bridge drivers across display controllers. I see chance to use the LVDS Display Bridge(LDB) helper(imx-ldb-helper.c) for i.MX6sx LDB. [1] https://patchwork.kernel.org/project/dri-devel/patch/20220407091156.1211923-6-victor.liu@nxp.com/ [2] https://patchwork.kernel.org/project/dri-devel/patch/20220624180201.150417-2-marex@denx.de/ Regards, Liu Ying
On 28/06/2022 04:31, Liu Ying wrote: > On Mon, 2022-06-27 at 14:22 +0200, Neil Armstrong wrote: >> Hi, > > Hi, > >> >> On 24/06/2022 14:10, Geert Uytterhoeven wrote: >>> The various Freescale i.MX8 display bridges are only present on >>> Freescale i.MX8 SoCs. Hence add a dependency on ARCH_MXC, to >>> prevent >>> asking the user about these drivers when configuring a kernel >>> without >>> i.MX SoC support. >>> >>> Fixes: e60c4354840b2fe8 ("drm/bridge: imx: Add LDB support for >>> i.MX8qm") >>> Fixes: 3818715f62b42b5c ("drm/bridge: imx: Add LDB support for >>> i.MX8qxp") >>> Fixes: 96988a526c97cfbe ("drm/bridge: imx: Add i.MX8qxp pixel link >>> to DPI support") >>> Fixes: 1ec17c26bc06289d ("drm/bridge: imx: Add i.MX8qm/qxp display >>> pixel link support") >>> Fixes: 93e163a9e0392aca ("drm/bridge: imx: Add i.MX8qm/qxp pixel >>> combiner support") >>> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> >>> Reviewed-by: Liu Ying <victor.liu@nxp.com> >>> --- >>> v2: >>> - s/i.MX8MP/i.MX8/, >>> - Add Reviewed-by. >>> --- >>> drivers/gpu/drm/bridge/imx/Kconfig | 4 ++++ >>> 1 file changed, 4 insertions(+) >>> >>> diff --git a/drivers/gpu/drm/bridge/imx/Kconfig >>> b/drivers/gpu/drm/bridge/imx/Kconfig >>> index 212a7b0e64fd8b5a..608f47f41bcd1c81 100644 >>> --- a/drivers/gpu/drm/bridge/imx/Kconfig >>> +++ b/drivers/gpu/drm/bridge/imx/Kconfig >>> @@ -1,3 +1,5 @@ >>> +if ARCH_MXC || COMPILE_TEST >>> + >>> config DRM_IMX8QM_LDB >>> tristate "Freescale i.MX8QM LVDS display bridge" >>> depends on OF >>> @@ -41,3 +43,5 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI >>> help >>> Choose this to enable pixel link to display pixel >>> interface(PXL2DPI) >>> found in Freescale i.MX8qxp processor. >>> + >>> +endif # ARCH_MXC || COMPILE_TEST >> >> I was wondering why those were added in drivers/gpu/drm/bridge/imx >> since they are specific to NXP SoCs, >> I think they should be moved in the right drm imx subsystem instead >> of this change. > > There are 2 directories which contain display controller drivers for > i.MX SoCs: > a. drivers/gpu/drm/imx - i.MX51/53/6qdl IPUv3, i.MX8mq DCSS and > i.MX8qm/qxp DPU([1], not landed yet) > b. drivers/gpu/drm/mxsfb - i.MX23/28/6sx/8mq LCDIF and i.MX8mp > LCDIFv3([2], not landed yet) > > Bridges added in drivers/gpu/drm/bridge/imx make it possible to share > bridge drivers across display controllers. I see chance to use the > LVDS Display Bridge(LDB) helper(imx-ldb-helper.c) for i.MX6sx LDB. Thanks for the explanation, LGTM Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> > > [1] > https://patchwork.kernel.org/project/dri-devel/patch/20220407091156.1211923-6-victor.liu@nxp.com/ > [2] > https://patchwork.kernel.org/project/dri-devel/patch/20220624180201.150417-2-marex@denx.de/ > > Regards, > Liu Ying >
Hi Neil, Robert, On Tue, 2022-06-28 at 09:10 +0200, Neil Armstrong wrote: > On 28/06/2022 04:31, Liu Ying wrote: > > On Mon, 2022-06-27 at 14:22 +0200, Neil Armstrong wrote: > > > Hi, > > > > Hi, > > > > > > > > On 24/06/2022 14:10, Geert Uytterhoeven wrote: > > > > The various Freescale i.MX8 display bridges are only present on > > > > Freescale i.MX8 SoCs. Hence add a dependency on ARCH_MXC, to > > > > prevent > > > > asking the user about these drivers when configuring a kernel > > > > without > > > > i.MX SoC support. > > > > > > > > Fixes: e60c4354840b2fe8 ("drm/bridge: imx: Add LDB support for > > > > i.MX8qm") > > > > Fixes: 3818715f62b42b5c ("drm/bridge: imx: Add LDB support for > > > > i.MX8qxp") > > > > Fixes: 96988a526c97cfbe ("drm/bridge: imx: Add i.MX8qxp pixel > > > > link > > > > to DPI support") > > > > Fixes: 1ec17c26bc06289d ("drm/bridge: imx: Add i.MX8qm/qxp > > > > display > > > > pixel link support") > > > > Fixes: 93e163a9e0392aca ("drm/bridge: imx: Add i.MX8qm/qxp > > > > pixel > > > > combiner support") > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > > > Reviewed-by: Liu Ying <victor.liu@nxp.com> > > > > --- > > > > v2: > > > > - s/i.MX8MP/i.MX8/, > > > > - Add Reviewed-by. > > > > --- > > > > drivers/gpu/drm/bridge/imx/Kconfig | 4 ++++ > > > > 1 file changed, 4 insertions(+) > > > > > > > > diff --git a/drivers/gpu/drm/bridge/imx/Kconfig > > > > b/drivers/gpu/drm/bridge/imx/Kconfig > > > > index 212a7b0e64fd8b5a..608f47f41bcd1c81 100644 > > > > --- a/drivers/gpu/drm/bridge/imx/Kconfig > > > > +++ b/drivers/gpu/drm/bridge/imx/Kconfig > > > > @@ -1,3 +1,5 @@ > > > > +if ARCH_MXC || COMPILE_TEST > > > > + > > > > config DRM_IMX8QM_LDB > > > > tristate "Freescale i.MX8QM LVDS display bridge" > > > > depends on OF > > > > @@ -41,3 +43,5 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI > > > > help > > > > Choose this to enable pixel link to display pixel > > > > interface(PXL2DPI) > > > > found in Freescale i.MX8qxp processor. > > > > + > > > > +endif # ARCH_MXC || COMPILE_TEST > > > > > > I was wondering why those were added in > > > drivers/gpu/drm/bridge/imx > > > since they are specific to NXP SoCs, > > > I think they should be moved in the right drm imx subsystem > > > instead > > > of this change. > > > > There are 2 directories which contain display controller drivers > > for > > i.MX SoCs: > > a. drivers/gpu/drm/imx - i.MX51/53/6qdl IPUv3, i.MX8mq DCSS and > > i.MX8qm/qxp DPU([1], not landed yet) > > b. drivers/gpu/drm/mxsfb - i.MX23/28/6sx/8mq LCDIF and i.MX8mp > > LCDIFv3([2], not landed yet) > > > > Bridges added in drivers/gpu/drm/bridge/imx make it possible to > > share > > bridge drivers across display controllers. I see chance to use the > > LVDS Display Bridge(LDB) helper(imx-ldb-helper.c) for i.MX6sx LDB. > > Thanks for the explanation, LGTM > Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Care to pick this up? I don't have permission to push this to drm-misc. Regards, Liu Ying
Hi, On Fri, 24 Jun 2022 14:10:51 +0200, Geert Uytterhoeven wrote: > The various Freescale i.MX8 display bridges are only present on > Freescale i.MX8 SoCs. Hence add a dependency on ARCH_MXC, to prevent > asking the user about these drivers when configuring a kernel without > i.MX SoC support. > > Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next) [1/1] drm/bridge: imx: i.MX8 bridge drivers should depend on ARCH_MXC https://cgit.freedesktop.org/drm/drm-misc/commit/?id=5cd561688b3e8a248fdbb37a1b10801b06736865
diff --git a/drivers/gpu/drm/bridge/imx/Kconfig b/drivers/gpu/drm/bridge/imx/Kconfig index 212a7b0e64fd8b5a..608f47f41bcd1c81 100644 --- a/drivers/gpu/drm/bridge/imx/Kconfig +++ b/drivers/gpu/drm/bridge/imx/Kconfig @@ -1,3 +1,5 @@ +if ARCH_MXC || COMPILE_TEST + config DRM_IMX8QM_LDB tristate "Freescale i.MX8QM LVDS display bridge" depends on OF @@ -41,3 +43,5 @@ config DRM_IMX8QXP_PIXEL_LINK_TO_DPI help Choose this to enable pixel link to display pixel interface(PXL2DPI) found in Freescale i.MX8qxp processor. + +endif # ARCH_MXC || COMPILE_TEST