| Message ID | 20220627080341.5087-2-rex-bc.chen@mediatek.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | drm/mediatek: Add MT8195 DisplayPort driver | expand |
On Mon, 27 Jun 2022 16:03:32 +0800, Bo-Chen Chen wrote: > From: Markus Schneider-Pargmann <msp@baylibre.com> > > This controller is present on several mediatek hardware. Currently > mt8195 and mt8395 have this controller without a functional difference, > so only one compatible field is added. > > The controller can have two forms, as a normal display port and as an > embedded display port. > > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com> > [Bo-Chen: Fix reviewers' comment] > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com> > --- > .../display/mediatek/mediatek,dp.yaml | 108 ++++++++++++++++++ > 1 file changed, 108 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.example.dtb: dp_tx@1c600000: data-lanes: [[0, 1, 2, 3]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.example.dtb: dp_tx@1c600000: data-lanes: [[0, 1, 2, 3]] is not of type 'object' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml new file mode 100644 index 000000000000..1a16545b6afa --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,dp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Port Controller + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Jitao shi <jitao.shi@mediatek.com> + +description: | + Device tree bindings for the MediaTek display port and + embedded display port controller present on some MediaTek SoCs. + +properties: + compatible: + enum: + - mediatek,mt8195-dp-tx + - mediatek,mt8195-edp-tx + + reg: + maxItems: 1 + + nvmem-cells: + maxItems: 1 + description: efuse data for display port calibration + + nvmem-cell-names: + const: dp_calibration_data + + power-domains: + maxItems: 1 + + interrupts: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoint of the controller, usually dp_intf + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoint of the controller + + required: + - port@0 + - port@1 + + data-lanes: + $ref: /schemas/media/video-interfaces.yaml# + description: | + number of lanes supported by the hardware. + The possible values: + 0 - For 1 lane enabled in IP. + 0 1 - For 2 lanes enabled in IP. + 0 1 2 3 - For 4 lanes enabled in IP. + minItems: 1 + maxItems: 4 + + max-linkrate-mhz: + enum: [ 1620, 2700, 5400, 8100 ] + description: maximum link rate supported by the hardware. + +required: + - compatible + - reg + - interrupts + - ports + - data-lanes + - max-linkrate-mhz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/mt8195-power.h> + dp_tx@1c600000 { + compatible = "mediatek,mt8195-dp-tx"; + reg = <0x1c600000 0x8000>; + power-domains = <&spm MT8195_POWER_DOMAIN_DP_TX>; + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH 0>; + data-lanes = <0 1 2 3>; + max-linkrate-mhz = <8100>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + edp_in: endpoint { + remote-endpoint = <&dp_intf0_out>; + }; + }; + port@1 { + reg = <1>; + edp_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + };