| Message ID | 20220629094426.1930589-3-neal_liu@aspeedtech.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Aspeed crypto driver for hardware acceleration | expand |
On 29/06/2022 11:44, Neal Liu wrote: > Add HACE reset bit definition for AST2500/AST2600. > > Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> > Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> > --- > include/dt-bindings/clock/aspeed-clock.h | 1 + > include/dt-bindings/clock/ast2600-clock.h | 1 + > 2 files changed, 2 insertions(+) Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On 6/29/2022 2:44 AM, Neal Liu wrote: > Add HACE reset bit definition for AST2500/AST2600. > > Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> > Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> > --- > include/dt-bindings/clock/aspeed-clock.h | 1 + > include/dt-bindings/clock/ast2600-clock.h | 1 + > 2 files changed, 2 insertions(+) > > diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h > index 9ff4f6e4558c..06d568382c77 100644 > --- a/include/dt-bindings/clock/aspeed-clock.h > +++ b/include/dt-bindings/clock/aspeed-clock.h > @@ -52,5 +52,6 @@ > #define ASPEED_RESET_I2C 7 > #define ASPEED_RESET_AHB 8 > #define ASPEED_RESET_CRT1 9 > +#define ASPEED_RESET_HACE 10 NAK. I replied to older v5 of this patch, but this v6 also looks incorrect as per HW manual. https://lore.kernel.org/linux-arm-kernel/20220629032008.1579899-1-neal_liu@aspeedtech.com/T/#m000bd3388b3e41117aa0eef10bf6f8a6a3a85cce For both AST2400 and AST2500: SCU04[10] = PECI. It will be best to refactor/split aspeed-clock.h into separate files. Regards, Dhananjay
> -----Original Message----- > From: Dhananjay Phadke <dphadke@linux.microsoft.com> > Sent: Wednesday, June 29, 2022 7:50 PM > To: Neal Liu <neal_liu@aspeedtech.com>; Corentin Labbe > <clabbe.montjoie@gmail.com>; Christophe JAILLET > <christophe.jaillet@wanadoo.fr>; Randy Dunlap <rdunlap@infradead.org>; > Herbert Xu <herbert@gondor.apana.org.au>; David S . Miller > <davem@davemloft.net>; Rob Herring <robh+dt@kernel.org>; Krzysztof > Kozlowski <krzysztof.kozlowski+dt@linaro.org>; Joel Stanley <joel@jms.id.au>; > Andrew Jeffery <andrew@aj.id.au>; Dhananjay Phadke > <dhphadke@microsoft.com>; Johnny Huang > <johnny_huang@aspeedtech.com> > Cc: devicetree@vger.kernel.org; linux-aspeed@lists.ozlabs.org; BMC-SW > <BMC-SW@aspeedtech.com>; linux-kernel@vger.kernel.org; > linux-crypto@vger.kernel.org; linux-arm-kernel@lists.infradead.org > Subject: Re: [PATCH v6 2/5] dt-bindings: clock: Add AST2500/AST2600 HACE > reset definition > > On 6/29/2022 2:44 AM, Neal Liu wrote: > > Add HACE reset bit definition for AST2500/AST2600. > > > > Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> > > Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> > > --- > > include/dt-bindings/clock/aspeed-clock.h | 1 + > > include/dt-bindings/clock/ast2600-clock.h | 1 + > > 2 files changed, 2 insertions(+) > > > > diff --git a/include/dt-bindings/clock/aspeed-clock.h > > b/include/dt-bindings/clock/aspeed-clock.h > > index 9ff4f6e4558c..06d568382c77 100644 > > --- a/include/dt-bindings/clock/aspeed-clock.h > > +++ b/include/dt-bindings/clock/aspeed-clock.h > > @@ -52,5 +52,6 @@ > > #define ASPEED_RESET_I2C 7 > > #define ASPEED_RESET_AHB 8 > > #define ASPEED_RESET_CRT1 9 > > +#define ASPEED_RESET_HACE 10 > > NAK. > > I replied to older v5 of this patch, but this v6 also looks incorrect as per HW > manual. > > https://lore.kernel.org/linux-arm-kernel/20220629032008.1579899-1-neal_liu > @aspeedtech.com/T/#m000bd3388b3e41117aa0eef10bf6f8a6a3a85cce > > For both AST2400 and AST2500: > SCU04[10] = PECI. > > It will be best to refactor/split aspeed-clock.h into separate files. Hi, based on @Krzysztof mentioned, change these define is not allowed due to breaking ABI. So another way is to define a new value(interface), and we can change driver's implementation. I know this is not intuitive to hardware register's value, it also confused me at the first time.
On 6/29/2022 8:17 PM, Neal Liu wrote: [...] >> On 6/29/2022 2:44 AM, Neal Liu wrote: >>> Add HACE reset bit definition for AST2500/AST2600. >>> >>> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> >>> Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> >>> --- >>> include/dt-bindings/clock/aspeed-clock.h | 1 + >>> include/dt-bindings/clock/ast2600-clock.h | 1 + >>> 2 files changed, 2 insertions(+) >>> >>> diff --git a/include/dt-bindings/clock/aspeed-clock.h >>> b/include/dt-bindings/clock/aspeed-clock.h >>> index 9ff4f6e4558c..06d568382c77 100644 >>> --- a/include/dt-bindings/clock/aspeed-clock.h >>> +++ b/include/dt-bindings/clock/aspeed-clock.h >>> @@ -52,5 +52,6 @@ >>> #define ASPEED_RESET_I2C 7 >>> #define ASPEED_RESET_AHB 8 >>> #define ASPEED_RESET_CRT1 9 >>> +#define ASPEED_RESET_HACE 10 >> >> NAK. >> >> I replied to older v5 of this patch, but this v6 also looks incorrect as per HW >> manual. >> >> https://lore.kernel.org/linux-arm-kernel/20220629032008.1579899-1-neal_liu >> @aspeedtech.com/T/#m000bd3388b3e41117aa0eef10bf6f8a6a3a85cce >> >> For both AST2400 and AST2500: >> SCU04[10] = PECI. >> >> It will be best to refactor/split aspeed-clock.h into separate files. > > Hi, based on @Krzysztof mentioned, change these define is not allowed due to breaking ABI. > So another way is to define a new value(interface), and we can change driver's implementation. > I know this is not intuitive to hardware register's value, it also confused me at the first time. > > This is not SW ABI issue. Each controller in the device-tree needs correct clock and reset paths. aspeed-clock.h is shared between g4 and g5 dtsi. Not sure how you picked bit 10 for HACE, it's for resetting PECI controller. See drivers/clk/clk-aspeed.c, which BTW is duplicating same stuff. [ASPEED_RESET_MIC] = 18, [ASPEED_RESET_PWM] = 9, [ASPEED_RESET_PECI] = 10, FWIW, the reset bit for HACE and MIC are interchanged for AST2400 and AST2500 (at least as per HW datasheet). So this is really fixing what's apparently already broken. Regards, Dhananjay
> On 6/29/2022 8:17 PM, Neal Liu wrote: > [...] > >> On 6/29/2022 2:44 AM, Neal Liu wrote: > >>> Add HACE reset bit definition for AST2500/AST2600. > >>> > >>> Signed-off-by: Neal Liu <neal_liu@aspeedtech.com> > >>> Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com> > >>> --- > >>> include/dt-bindings/clock/aspeed-clock.h | 1 + > >>> include/dt-bindings/clock/ast2600-clock.h | 1 + > >>> 2 files changed, 2 insertions(+) > >>> > >>> diff --git a/include/dt-bindings/clock/aspeed-clock.h > >>> b/include/dt-bindings/clock/aspeed-clock.h > >>> index 9ff4f6e4558c..06d568382c77 100644 > >>> --- a/include/dt-bindings/clock/aspeed-clock.h > >>> +++ b/include/dt-bindings/clock/aspeed-clock.h > >>> @@ -52,5 +52,6 @@ > >>> #define ASPEED_RESET_I2C 7 > >>> #define ASPEED_RESET_AHB 8 > >>> #define ASPEED_RESET_CRT1 9 > >>> +#define ASPEED_RESET_HACE 10 > >> > >> NAK. > >> > >> I replied to older v5 of this patch, but this v6 also looks incorrect > >> as per HW manual. > >> > >> https://lore.kernel.org/linux-arm-kernel/20220629032008.1579899-1-nea > >> l_liu > @aspeedtech.com/T/#m000bd3388b3e41117aa0eef10bf6f8a6a3a85cce > >> > >> For both AST2400 and AST2500: > >> SCU04[10] = PECI. > >> > >> It will be best to refactor/split aspeed-clock.h into separate files. > > > > Hi, based on @Krzysztof mentioned, change these define is not allowed due > to breaking ABI. > > So another way is to define a new value(interface), and we can change > driver's implementation. > > I know this is not intuitive to hardware register's value, it also confused me at > the first time. > > > > > > This is not SW ABI issue. Each controller in the device-tree needs correct clock > and reset paths. aspeed-clock.h is shared between g4 and > g5 dtsi. Not sure how you picked bit 10 for HACE, it's for resetting PECI > controller. > > See drivers/clk/clk-aspeed.c, which BTW is duplicating same stuff. > [ASPEED_RESET_MIC] = 18, > [ASPEED_RESET_PWM] = 9, > [ASPEED_RESET_PECI] = 10, > > FWIW, the reset bit for HACE and MIC are interchanged for AST2400 and > AST2500 (at least as per HW datasheet). > > So this is really fixing what's apparently already broken. Actually, "ASPEED_RESET_MIC" is just an index, the reset bit in SCU is bit 18 for both ast2400 and ast2500. So we have to add the real reset bit in drivers/clk/clk-aspeed.c, which would be: [ASPEED_RESET_HACE] = 4, I would send another patch for this change. I think it can be independent with these patch series. So no need to combine them here.
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h index 9ff4f6e4558c..06d568382c77 100644 --- a/include/dt-bindings/clock/aspeed-clock.h +++ b/include/dt-bindings/clock/aspeed-clock.h @@ -52,5 +52,6 @@ #define ASPEED_RESET_I2C 7 #define ASPEED_RESET_AHB 8 #define ASPEED_RESET_CRT1 9 +#define ASPEED_RESET_HACE 10 #endif diff --git a/include/dt-bindings/clock/ast2600-clock.h b/include/dt-bindings/clock/ast2600-clock.h index 62b9520a00fd..d8b0db2f7a7d 100644 --- a/include/dt-bindings/clock/ast2600-clock.h +++ b/include/dt-bindings/clock/ast2600-clock.h @@ -111,6 +111,7 @@ #define ASPEED_RESET_PCIE_RC_O 19 #define ASPEED_RESET_PCIE_RC_OEN 18 #define ASPEED_RESET_PCI_DP 5 +#define ASPEED_RESET_HACE 4 #define ASPEED_RESET_AHB 1 #define ASPEED_RESET_SDRAM 0