Message ID | 20220523223251.15350-1-rpearsonhpe@gmail.com (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Jason Gunthorpe |
Headers | show |
Series | [for-next] RDMA/rxe: Fix deadlock in rxe_do_local_ops() | expand |
On Mon, May 23, 2022 at 05:32:52PM -0500, Bob Pearson wrote: > When a local operation (invalidate mr, reg mr, bind mw) is finished > there will be no ack packet coming from a responder to cause the > wqe to be completed. This may happen anyway if a subsequent wqe > performs IO. Currently if the wqe is signalled the completer > tasklet is scheduled immediately but not otherwise. > > This leads to a deadlock if the next wqe has the fence bit set in > send flags and the operation is not signalled. This patch removes > the condition that the wqe must be signalled in order to schedule > the completer tasklet which is the simplest fix for this deadlock > and is fairly low cost. This is the analog for local operations of > always setting the ackreq bit in all last or only request packets > even if the operation is not signalled. > > Reported-by: Jenny Hack <jhack@hpe.com> > Fixes: c1a411268a4b1 ("RDMA/rxe: Move local ops to subroutine") > Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> > --- > drivers/infiniband/sw/rxe/rxe_req.c | 8 +++++--- > 1 file changed, 5 insertions(+), 3 deletions(-) Applied to for-next, thanks Jason
Thanks Jason. -----Original Message----- From: Jason Gunthorpe <jgg@nvidia.com> Sent: Thursday, June 30, 2022 6:58 PM To: Bob Pearson <rpearsonhpe@gmail.com> Cc: zyjzyj2000@gmail.com; Hack, Jenny (Ft. Collins) <jhack@hpe.com>; Zago, Frank <frank.zago@hpe.com>; linux-rdma@vger.kernel.org Subject: Re: [PATCH] RDMA/rxe: Fix deadlock in rxe_do_local_ops() On Mon, May 23, 2022 at 05:32:52PM -0500, Bob Pearson wrote: > When a local operation (invalidate mr, reg mr, bind mw) is finished > there will be no ack packet coming from a responder to cause the wqe > to be completed. This may happen anyway if a subsequent wqe performs > IO. Currently if the wqe is signalled the completer tasklet is > scheduled immediately but not otherwise. > > This leads to a deadlock if the next wqe has the fence bit set in send > flags and the operation is not signalled. This patch removes the > condition that the wqe must be signalled in order to schedule the > completer tasklet which is the simplest fix for this deadlock and is > fairly low cost. This is the analog for local operations of always > setting the ackreq bit in all last or only request packets even if the > operation is not signalled. > > Reported-by: Jenny Hack <jhack@hpe.com> > Fixes: c1a411268a4b1 ("RDMA/rxe: Move local ops to subroutine") > Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> > --- > drivers/infiniband/sw/rxe/rxe_req.c | 8 +++++--- > 1 file changed, 5 insertions(+), 3 deletions(-) Applied to for-next, thanks Jason
diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c index ae5fbc79dd5c..ca0b60dd365d 100644 --- a/drivers/infiniband/sw/rxe/rxe_req.c +++ b/drivers/infiniband/sw/rxe/rxe_req.c @@ -586,9 +586,11 @@ static int rxe_do_local_ops(struct rxe_qp *qp, struct rxe_send_wqe *wqe) wqe->status = IB_WC_SUCCESS; qp->req.wqe_index = queue_next_index(qp->sq.queue, qp->req.wqe_index); - if ((wqe->wr.send_flags & IB_SEND_SIGNALED) || - qp->sq_sig_type == IB_SIGNAL_ALL_WR) - rxe_run_task(&qp->comp.task, 1); + /* There is no ack coming for local work requests + * which can lead to a deadlock. So go ahead and complete + * it now. + */ + rxe_run_task(&qp->comp.task, 1); return 0; }
When a local operation (invalidate mr, reg mr, bind mw) is finished there will be no ack packet coming from a responder to cause the wqe to be completed. This may happen anyway if a subsequent wqe performs IO. Currently if the wqe is signalled the completer tasklet is scheduled immediately but not otherwise. This leads to a deadlock if the next wqe has the fence bit set in send flags and the operation is not signalled. This patch removes the condition that the wqe must be signalled in order to schedule the completer tasklet which is the simplest fix for this deadlock and is fairly low cost. This is the analog for local operations of always setting the ackreq bit in all last or only request packets even if the operation is not signalled. Reported-by: Jenny Hack <jhack@hpe.com> Fixes: c1a411268a4b1 ("RDMA/rxe: Move local ops to subroutine") Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> --- drivers/infiniband/sw/rxe/rxe_req.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) base-commit: c5eb0a61238dd6faf37f58c9ce61c9980aaffd7a