diff mbox series

[1/2] arm64: dts: microchip: adjust whitespace around '='

Message ID 20220526204110.831805-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State Accepted
Commit 09f4933a4fd9ebe333726dd139bd330843d40f28
Headers show
Series [1/2] arm64: dts: microchip: adjust whitespace around '=' | expand

Commit Message

Krzysztof Kozlowski May 26, 2022, 8:41 p.m. UTC 
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Output compared with dtx_diff and fdtdump.
---
 .../dts/microchip/sparx5_pcb134_board.dtsi    | 200 +++++++++---------
 .../dts/microchip/sparx5_pcb135_board.dtsi    |  48 ++---
 2 files changed, 124 insertions(+), 124 deletions(-)

Comments

Krzysztof Kozlowski June 16, 2022, 8:47 p.m. UTC | #1 
On Thu, 26 May 2022 22:41:08 +0200, Krzysztof Kozlowski wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> 

Applied, thanks!

[1/2] arm64: dts: microchip: adjust whitespace around '='
      https://git.kernel.org/krzk/linux/c/09f4933a4fd9ebe333726dd139bd330843d40f28
[2/2] ARM: dts: at91: adjust whitespace around '='
      https://git.kernel.org/krzk/linux/c/bc5187b427ddbfefd533178c7af6af9fa3a0490d

Best regards,
patchwork-bot+linux-soc@kernel.org July 1, 2022, 8:41 p.m. UTC | #2 
Hello:

This series was applied to soc/soc.git (for-next)
by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>:

On Thu, 26 May 2022 22:41:08 +0200 you wrote:
> Fix whitespace coding style: use single space instead of tabs or
> multiple spaces around '=' sign in property assignment.  No functional
> changes (same DTB).
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> 
> [...]

Here is the summary with links:
  - [1/2] arm64: dts: microchip: adjust whitespace around '='
    https://git.kernel.org/soc/soc/c/09f4933a4fd9
  - [2/2] ARM: dts: at91: adjust whitespace around '='
    https://git.kernel.org/soc/soc/c/bc5187b427dd

You are awesome, thank you!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
index 699256f1b9d8..bf12be5e8d84 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb134_board.dtsi
@@ -546,164 +546,164 @@  phy64: ethernet-phy@64 {
 
 &axi {
 	sfp_eth12: sfp-eth12 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp1>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
 		tx-disable-gpios = <&sgpio_out2 11 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 11 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 11 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 12 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth13: sfp-eth13 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp2>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
 		tx-disable-gpios = <&sgpio_out2 12 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 12 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 12 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 13 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth14: sfp-eth14 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp3>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
 		tx-disable-gpios = <&sgpio_out2 13 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 13 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 13 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 14 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth15: sfp-eth15 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp4>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
 		tx-disable-gpios = <&sgpio_out2 14 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 14 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 14 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 15 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth48: sfp-eth48 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp5>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp5>;
 		tx-disable-gpios = <&sgpio_out2 15 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 15 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 15 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 16 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth49: sfp-eth49 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp6>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp6>;
 		tx-disable-gpios = <&sgpio_out2 16 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 16 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 16 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 17 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth50: sfp-eth50 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp7>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp7>;
 		tx-disable-gpios = <&sgpio_out2 17 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 17 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 17 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 18 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth51: sfp-eth51 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp8>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp8>;
 		tx-disable-gpios = <&sgpio_out2 18 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 18 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 18 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 19 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth52: sfp-eth52 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp9>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp9>;
 		tx-disable-gpios = <&sgpio_out2 19 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 19 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 19 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 20 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth53: sfp-eth53 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp10>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp10>;
 		tx-disable-gpios = <&sgpio_out2 20 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 20 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 20 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 21 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth54: sfp-eth54 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp11>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp11>;
 		tx-disable-gpios = <&sgpio_out2 21 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 21 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 21 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 22 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth55: sfp-eth55 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp12>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp12>;
 		tx-disable-gpios = <&sgpio_out2 22 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 22 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 22 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 23 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth56: sfp-eth56 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp13>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp13>;
 		tx-disable-gpios = <&sgpio_out2 23 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 23 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 23 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 24 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth57: sfp-eth57 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp14>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp14>;
 		tx-disable-gpios = <&sgpio_out2 24 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 24 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 24 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 25 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth58: sfp-eth58 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp15>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp15>;
 		tx-disable-gpios = <&sgpio_out2 25 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 25 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 25 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 26 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth59: sfp-eth59 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp16>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp16>;
 		tx-disable-gpios = <&sgpio_out2 26 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 26 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 26 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 27 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth60: sfp-eth60 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp17>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp17>;
 		tx-disable-gpios = <&sgpio_out2 27 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 27 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 27 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth61: sfp-eth61 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp18>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp18>;
 		tx-disable-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth62: sfp-eth62 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp19>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp19>;
 		tx-disable-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth63: sfp-eth63 {
-		compatible       = "sff,sfp";
-		i2c-bus          = <&i2c_sfp20>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp20>;
 		tx-disable-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_LOW>;
-		los-gpios        = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios   = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios   = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
index d10a9172b529..ec90bda7ed6a 100644
--- a/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
+++ b/arch/arm64/boot/dts/microchip/sparx5_pcb135_board.dtsi
@@ -170,40 +170,40 @@  i2c_sfp4: i2c_sfp4 {
 
 &axi {
 	sfp_eth60: sfp-eth60 {
-		compatible	   = "sff,sfp";
-		i2c-bus            = <&i2c_sfp1>;
-		tx-disable-gpios   = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
+		compatible	 = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		tx-disable-gpios = <&sgpio_out2 28 0 GPIO_ACTIVE_LOW>;
 		rate-select0-gpios = <&sgpio_out2 28 1 GPIO_ACTIVE_HIGH>;
-		los-gpios          = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios     = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios     = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 28 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 28 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 28 2 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth61: sfp-eth61 {
-		compatible         = "sff,sfp";
-		i2c-bus            = <&i2c_sfp2>;
-		tx-disable-gpios   = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		tx-disable-gpios = <&sgpio_out2 29 0 GPIO_ACTIVE_LOW>;
 		rate-select0-gpios = <&sgpio_out2 29 1 GPIO_ACTIVE_HIGH>;
-		los-gpios          = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios     = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios     = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 29 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 29 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 29 2 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth62: sfp-eth62 {
-		compatible         = "sff,sfp";
-		i2c-bus            = <&i2c_sfp3>;
-		tx-disable-gpios   = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp3>;
+		tx-disable-gpios = <&sgpio_out2 30 0 GPIO_ACTIVE_LOW>;
 		rate-select0-gpios = <&sgpio_out2 30 1 GPIO_ACTIVE_HIGH>;
-		los-gpios          = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios     = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios     = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 30 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 30 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 30 2 GPIO_ACTIVE_HIGH>;
 	};
 	sfp_eth63: sfp-eth63 {
-		compatible         = "sff,sfp";
-		i2c-bus            = <&i2c_sfp4>;
-		tx-disable-gpios   = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp4>;
+		tx-disable-gpios = <&sgpio_out2 31 0 GPIO_ACTIVE_LOW>;
 		rate-select0-gpios = <&sgpio_out2 31 1 GPIO_ACTIVE_HIGH>;
-		los-gpios          = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpios     = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
-		tx-fault-gpios     = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sgpio_in2 31 0 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sgpio_in2 31 1 GPIO_ACTIVE_LOW>;
+		tx-fault-gpios = <&sgpio_in2 31 2 GPIO_ACTIVE_HIGH>;
 	};
 };