| Message ID | 20220705215213.1802496-1-mail@conchuod.ie (mailing list archive) |
|---|---|
| Headers | show |
| Series | Canaan devicetree fixes | expand |
Hi Conor, On Tue, Jul 5, 2022 at 11:52 PM Conor Dooley <mail@conchuod.ie> wrote: > I *DO NOT* have any Canaan hardware so I have not tested any of this in > action. Since I sent v1, I tried to buy some since it's cheap - but could > out of the limited stockists none seemed to want to deliver to Ireland :( > I based the series on next-20220617. Digi-Key does not want to ship to IRL? The plain MAiX BiT is out-of-stock, but the kit incl. a display is available (97 in stock). Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
Hi Conor, On Tue, Jul 5, 2022 at 11:52 PM Conor Dooley <mail@conchuod.ie> wrote: > This series should rid us of dtbs_check errors for the RISC-V Canaan k210 > based boards. To make keeping it that way a little easier, I changed the > Canaan devicetree Makefile so that it would build all of the devicetrees > in the directory if SOC_CANAAN. > > I *DO NOT* have any Canaan hardware so I have not tested any of this in > action. Since I sent v1, I tried to buy some since it's cheap - but could > out of the limited stockists none seemed to want to deliver to Ireland :( > I based the series on next-20220617. Boots fine on SiPEED MAiX BiT, so Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
On 06/07/2022 09:03, Geert Uytterhoeven wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > Hi Conor, > > On Tue, Jul 5, 2022 at 11:52 PM Conor Dooley <mail@conchuod.ie> wrote: >> I *DO NOT* have any Canaan hardware so I have not tested any of this in >> action. Since I sent v1, I tried to buy some since it's cheap - but could >> out of the limited stockists none seemed to want to deliver to Ireland :( >> I based the series on next-20220617. > > Digi-Key does not want to ship to IRL? Hmm, odd. I did check digikey - but with search terms like "canaan" "k210" "kendryte" which returned nothing. I've had some odd localisation problems with digikey before though on the IE site. I'll change region to Ireland & an item will become unavailable despite being purchasable. > The plain MAiX BiT is out-of-stock, but the kit incl. a display is > available (97 in stock). Cool, make that 96 ;) > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
On 7/6/22 17:03, Geert Uytterhoeven wrote: > Hi Conor, > > On Tue, Jul 5, 2022 at 11:52 PM Conor Dooley <mail@conchuod.ie> wrote: >> I *DO NOT* have any Canaan hardware so I have not tested any of this in >> action. Since I sent v1, I tried to buy some since it's cheap - but could >> out of the limited stockists none seemed to want to deliver to Ireland :( >> I based the series on next-20220617. > > Digi-Key does not want to ship to IRL? > The plain MAiX BiT is out-of-stock, but the kit incl. a display is > available (97 in stock). Seedstudio is out of stock on the MAIX bit, but they have maixduino, which is the same, almost (pin wiring differs, everything else is the same). https://www.seeedstudio.com/Sipeed-Maixduino-Kit-for-RISC-V-AI-IoT-p-4047.html And you can still find plenty of MAIX bit on Aliexpress too. > > Gr{oetje,eeting}s, > > Geert > > -- > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org > > In personal conversations with technical people, I call myself a hacker. But > when I'm talking to journalists I just say "programmer" or something like that. > -- Linus Torvalds > > _______________________________________________ > linux-riscv mailing list > linux-riscv@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-riscv
On 06/07/2022 12:55, Damien Le Moal wrote: > On 7/6/22 17:03, Geert Uytterhoeven wrote: >> Hi Conor, >> >> On Tue, Jul 5, 2022 at 11:52 PM Conor Dooley <mail@conchuod.ie> wrote: >>> I *DO NOT* have any Canaan hardware so I have not tested any of this in >>> action. Since I sent v1, I tried to buy some since it's cheap - but could >>> out of the limited stockists none seemed to want to deliver to Ireland :( >>> I based the series on next-20220617. >> >> Digi-Key does not want to ship to IRL? >> The plain MAiX BiT is out-of-stock, but the kit incl. a display is >> available (97 in stock). > > Seedstudio is out of stock on the MAIX bit, but they have maixduino, which > is the same, almost (pin wiring differs, everything else is the same). I picked one up from DigiKey this morning. Woulda been nice if they used some of the k210 related words in the descriptions for the sake of their search engine! > https://www.seeedstudio.com/Sipeed-Maixduino-Kit-for-RISC-V-AI-IoT-p-4047.html This was actually out of stock when I looked. > And you can still find plenty of MAIX bit on Aliexpress too. I dunno how it is for you, but I find that sometimes on Ali they dislike my address and that was the case for the boards I checked on Ali. Either way, it's Ali and a merge window would come and go before I'd get it!
On Tue, 05 Jul 2022 14:52:01 PDT (-0700), mail@conchuod.ie wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > Hey all, > This series should rid us of dtbs_check errors for the RISC-V Canaan k210 > based boards. To make keeping it that way a little easier, I changed the > Canaan devicetree Makefile so that it would build all of the devicetrees > in the directory if SOC_CANAAN. > > I *DO NOT* have any Canaan hardware so I have not tested any of this in > action. Since I sent v1, I tried to buy some since it's cheap - but could > out of the limited stockists none seemed to want to deliver to Ireland :( > I based the series on next-20220617. > > Thanks, > Conor. > > Changes since v4: > - add Rob's tags from v3 > - sram: rephrase the binding description > - ASoC: dropped the applied binding > > Changes since v3: > - dts: drop the bogus "regs" property pointed out by Niklas > - dma/timer: add Serge's reviews (and expand on the dma interrupt > description) > - dts: add Niklas' T-b where I felt it was suitable. lmk if you think it > applies more broadly > - spi: drop the applied spi dt-binding change. Thanks Mark. > > Changes since v2: > - i2s: added clocks maxItems > - dma: unconditionally extended the interrupts & dropped canaan > compatible > - timer: as per Sergey, split the timer dts nodes in 2 & drop the > binding patch > - ili9341: add a canaan specific compatible to the binding and dts > > Changes since v1: > - I added a new dt node & compatible for the SRAM memory controller due > Damien's wish to preserve the inter-op with U-Boot. > - The dw-apb-ssi binding now uses the default rx/tx widths > - A new patch fixes bus {ranges,reg} warnings > - Rearranged the patches in a slightly more logical order > > Conor Dooley (13): > dt-bindings: display: convert ilitek,ili9341.txt to dt-schema > dt-bindings: display: ili9341: document canaan kd233's lcd > dt-bindings: dma: dw-axi-dmac: extend the number of interrupts > dt-bindings: memory-controllers: add canaan k210 sram controller > riscv: dts: canaan: fix the k210's memory node > riscv: dts: canaan: fix the k210's timer nodes > riscv: dts: canaan: fix mmc node names > riscv: dts: canaan: fix kd233 display spi frequency > riscv: dts: canaan: use custom compatible for k210 i2s > riscv: dts: canaan: remove spi-max-frequency from controllers > riscv: dts: canaan: fix bus {ranges,reg} warnings > riscv: dts: canaan: add specific compatible for kd233's LCD > riscv: dts: canaan: build all devicetress if SOC_CANAAN > > .../bindings/display/ilitek,ili9341.txt | 27 ------- > .../display/panel/ilitek,ili9341.yaml | 49 +++++++++---- > .../bindings/dma/snps,dw-axi-dmac.yaml | 7 +- > .../memory-controllers/canaan,k210-sram.yaml | 52 +++++++++++++ > arch/riscv/boot/dts/canaan/Makefile | 10 ++- > arch/riscv/boot/dts/canaan/canaan_kd233.dts | 6 +- > arch/riscv/boot/dts/canaan/k210.dtsi | 73 +++++++++++++------ > .../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +- > .../boot/dts/canaan/sipeed_maix_dock.dts | 2 +- > arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +- > .../boot/dts/canaan/sipeed_maixduino.dts | 2 +- > 11 files changed, 159 insertions(+), 73 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt > create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml I'm trying to sort out how to merge this one. I'm not opposed to taking it through the RISC-V tree as Rob's reviewed/acked the bindings, but just figured I'd say something before putting anything on for-next to try and minimize confusion. Unless I'm missing something it's just patch 3 that's been taken so far, via Vinod's tree. I've dropped that one and put the rest on palmer/riscv-canaan_dt_schema, if that looks good then I'll take it into riscv/for-next when this loops back to the top of my queue. Thanks!
On 14/07/2022 23:11, Conor Dooley - M52691 wrote: > On 14/07/2022 23:04, Palmer Dabbelt wrote: >> I'm trying to sort out how to merge this one. I'm not opposed to taking it through the RISC-V tree as Rob's reviewed/acked the bindings, but just figured I'd say something before putting anything on for-next to try and minimize confusion. >> >> Unless I'm missing something it's just patch 3 that's been taken so far, via Vinod's tree. I've dropped that one and put the rest on palmer/riscv-canaan_dt_schema, if that looks good then I'll take it into riscv/for-next when this loops back to the top of my queue. >> >> Thanks! > > Patches 1 & 2 never got review from the DRM side and patch 12 > depends on those. If it comes to it, you could drop those three > (and patch 3 that Vinod took). The only other one is patch 4, > which has Krzysztof's ack as memory-controller maintainer, so > that one should be okay. Hey Palmer, These fixes have been sitting on palmer/riscv-canaan_dt_schema for a few weeks now, without an autobuilder complaint etc. Could you move it onto for-next? Would be nice to clear these up for 6.0 :) Thanks, Conor.
On Fri, 05 Aug 2022 10:51:00 PDT (-0700), Conor.Dooley@microchip.com wrote: > On 14/07/2022 23:11, Conor Dooley - M52691 wrote: >> On 14/07/2022 23:04, Palmer Dabbelt wrote: >>> I'm trying to sort out how to merge this one. I'm not opposed to taking it through the RISC-V tree as Rob's reviewed/acked the bindings, but just figured I'd say something before putting anything on for-next to try and minimize confusion. >>> >>> Unless I'm missing something it's just patch 3 that's been taken so far, via Vinod's tree. I've dropped that one and put the rest on palmer/riscv-canaan_dt_schema, if that looks good then I'll take it into riscv/for-next when this loops back to the top of my queue. >>> >>> Thanks! >> >> Patches 1 & 2 never got review from the DRM side and patch 12 >> depends on those. If it comes to it, you could drop those three >> (and patch 3 that Vinod took). The only other one is patch 4, >> which has Krzysztof's ack as memory-controller maintainer, so >> that one should be okay. > > Hey Palmer, > These fixes have been sitting on palmer/riscv-canaan_dt_schema for > a few weeks now, without an autobuilder complaint etc. Could you > move it onto for-next? These are on for-next.
On 10/08/2022 23:01, Palmer Dabbelt wrote: > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe > > On Fri, 05 Aug 2022 10:51:00 PDT (-0700), Conor.Dooley@microchip.com wrote: >> On 14/07/2022 23:11, Conor Dooley - M52691 wrote: >>> On 14/07/2022 23:04, Palmer Dabbelt wrote: >>>> I'm trying to sort out how to merge this one. I'm not opposed to taking it through the RISC-V tree as Rob's reviewed/acked the bindings, but just figured I'd say something before putting anything on for-next to try and minimize confusion. >>>> >>>> Unless I'm missing something it's just patch 3 that's been taken so far, via Vinod's tree. I've dropped that one and put the rest on palmer/riscv-canaan_dt_schema, if that looks good then I'll take it into riscv/for-next when this loops back to the top of my queue. >>>> >>>> Thanks! >>> >>> Patches 1 & 2 never got review from the DRM side and patch 12 >>> depends on those. If it comes to it, you could drop those three >>> (and patch 3 that Vinod took). The only other one is patch 4, >>> which has Krzysztof's ack as memory-controller maintainer, so >>> that one should be okay. >> >> Hey Palmer, >> These fixes have been sitting on palmer/riscv-canaan_dt_schema for >> a few weeks now, without an autobuilder complaint etc. Could you >> move it onto for-next? > > These are on for-next. Sweet, nearly clear of dtbs_check problems now :) Thanks!
From: Conor Dooley <conor.dooley@microchip.com> Hey all, This series should rid us of dtbs_check errors for the RISC-V Canaan k210 based boards. To make keeping it that way a little easier, I changed the Canaan devicetree Makefile so that it would build all of the devicetrees in the directory if SOC_CANAAN. I *DO NOT* have any Canaan hardware so I have not tested any of this in action. Since I sent v1, I tried to buy some since it's cheap - but could out of the limited stockists none seemed to want to deliver to Ireland :( I based the series on next-20220617. Thanks, Conor. Changes since v4: - add Rob's tags from v3 - sram: rephrase the binding description - ASoC: dropped the applied binding Changes since v3: - dts: drop the bogus "regs" property pointed out by Niklas - dma/timer: add Serge's reviews (and expand on the dma interrupt description) - dts: add Niklas' T-b where I felt it was suitable. lmk if you think it applies more broadly - spi: drop the applied spi dt-binding change. Thanks Mark. Changes since v2: - i2s: added clocks maxItems - dma: unconditionally extended the interrupts & dropped canaan compatible - timer: as per Sergey, split the timer dts nodes in 2 & drop the binding patch - ili9341: add a canaan specific compatible to the binding and dts Changes since v1: - I added a new dt node & compatible for the SRAM memory controller due Damien's wish to preserve the inter-op with U-Boot. - The dw-apb-ssi binding now uses the default rx/tx widths - A new patch fixes bus {ranges,reg} warnings - Rearranged the patches in a slightly more logical order Conor Dooley (13): dt-bindings: display: convert ilitek,ili9341.txt to dt-schema dt-bindings: display: ili9341: document canaan kd233's lcd dt-bindings: dma: dw-axi-dmac: extend the number of interrupts dt-bindings: memory-controllers: add canaan k210 sram controller riscv: dts: canaan: fix the k210's memory node riscv: dts: canaan: fix the k210's timer nodes riscv: dts: canaan: fix mmc node names riscv: dts: canaan: fix kd233 display spi frequency riscv: dts: canaan: use custom compatible for k210 i2s riscv: dts: canaan: remove spi-max-frequency from controllers riscv: dts: canaan: fix bus {ranges,reg} warnings riscv: dts: canaan: add specific compatible for kd233's LCD riscv: dts: canaan: build all devicetress if SOC_CANAAN .../bindings/display/ilitek,ili9341.txt | 27 ------- .../display/panel/ilitek,ili9341.yaml | 49 +++++++++---- .../bindings/dma/snps,dw-axi-dmac.yaml | 7 +- .../memory-controllers/canaan,k210-sram.yaml | 52 +++++++++++++ arch/riscv/boot/dts/canaan/Makefile | 10 ++- arch/riscv/boot/dts/canaan/canaan_kd233.dts | 6 +- arch/riscv/boot/dts/canaan/k210.dtsi | 73 +++++++++++++------ .../riscv/boot/dts/canaan/sipeed_maix_bit.dts | 2 +- .../boot/dts/canaan/sipeed_maix_dock.dts | 2 +- arch/riscv/boot/dts/canaan/sipeed_maix_go.dts | 2 +- .../boot/dts/canaan/sipeed_maixduino.dts | 2 +- 11 files changed, 159 insertions(+), 73 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt create mode 100644 Documentation/devicetree/bindings/memory-controllers/canaan,k210-sram.yaml base-commit: b6f1f2fa2bddd69ff46a190b8120bd440fd50563