diff mbox series

[v8,5/5] arm64: dts: qcom: sm8350: Add DISPCC node

Message ID 20220706154337.2026269-6-robert.foss@linaro.org (mailing list archive)
State Accepted
Commit 9fd4887cdec6395a4ff447af8988bce61b707fb0
Headers show
Series SM8350 Display/GPU clock enablement | expand

Commit Message

Robert Foss July 6, 2022, 3:43 p.m. UTC 
Add the dispcc clock-controller DT node for sm8350.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---

Changes since v2
 - Remove interconnect include - Bjorn

Changes since v3
 - Switch from .fw_name to .index

Changes since v5
 - Revert .fw_name to .index change

Changes since v6
 - Add r-b - Konrad


 arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

Comments

Bjorn Andersson July 7, 2022, 2:31 a.m. UTC | #1 
On Wed, 6 Jul 2022 17:43:37 +0200, Robert Foss wrote:
> Add the dispcc clock-controller DT node for sm8350.
> 
> 

Applied, thanks!

[5/5] arm64: dts: qcom: sm8350: Add DISPCC node
      commit: 9fd4887cdec6395a4ff447af8988bce61b707fb0

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 447a02f10463..aa0ca45ca184 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -4,6 +4,7 @@ 
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -2531,6 +2532,31 @@  usb_2_dwc3: usb@a800000 {
 			};
 		};
 
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8350-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			power-domains = <&rpmhpd SM8350_MMCX>;
+			power-domain-names = "mmcx";
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;