diff mbox series

[net-next,v3,13/47] net: phy: aquantia: Add some additional phy interfaces

Message ID 20220715215954.1449214-14-sean.anderson@seco.com (mailing list archive)
State RFC
Delegated to: Netdev Maintainers
Headers show
Series net: dpaa: Convert to phylink | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next, async
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count fail Series longer than 15 patches (and no cover letter)
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit fail Errors and warnings before: 9 this patch: 9
netdev/cc_maintainers success CCed 8 of 8 maintainers
netdev/build_clang fail Errors and warnings before: 10 this patch: 10
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn fail Errors and warnings before: 9 this patch: 9
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 51 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Sean Anderson July 15, 2022, 9:59 p.m. UTC 
These are documented in the AQR115 register reference. I haven't tested
them, but perhaps they'll be useful to someone.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

Changes in v3:
- New

 drivers/net/phy/aquantia_main.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

Comments

Andrew Lunn July 16, 2022, 6:18 p.m. UTC | #1 
On Fri, Jul 15, 2022 at 05:59:20PM -0400, Sean Anderson wrote:
> These are documented in the AQR115 register reference. I haven't tested
> them, but perhaps they'll be useful to someone.
> 
> Signed-off-by: Sean Anderson <sean.anderson@seco.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/aquantia_main.c b/drivers/net/phy/aquantia_main.c
index f9e2d20d0ec5..0a2f8c4aa845 100644
--- a/drivers/net/phy/aquantia_main.c
+++ b/drivers/net/phy/aquantia_main.c
@@ -28,9 +28,12 @@ 
 #define MDIO_PHYXS_VEND_IF_STATUS		0xe812
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_MASK	GENMASK(7, 3)
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR	0
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX	1
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI	2
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII	3
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI	4
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII	6
+#define MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI	7
 #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII	10
 
 #define MDIO_AN_VEND_PROV			0xc400
@@ -393,15 +396,24 @@  static int aqr107_read_status(struct phy_device *phydev)
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KR:
 		phydev->interface = PHY_INTERFACE_MODE_10GKR;
 		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_KX:
+		phydev->interface = PHY_INTERFACE_MODE_1000BASEKX;
+		break;
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XFI:
 		phydev->interface = PHY_INTERFACE_MODE_10GBASER;
 		break;
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_USXGMII:
 		phydev->interface = PHY_INTERFACE_MODE_USXGMII;
 		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_XAUI:
+		phydev->interface = PHY_INTERFACE_MODE_XAUI;
+		break;
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII:
 		phydev->interface = PHY_INTERFACE_MODE_SGMII;
 		break;
+	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_RXAUI:
+		phydev->interface = PHY_INTERFACE_MODE_RXAUI;
+		break;
 	case MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII:
 		phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
 		break;
@@ -514,11 +526,14 @@  static int aqr107_config_init(struct phy_device *phydev)
 
 	/* Check that the PHY interface type is compatible */
 	if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
+	    phydev->interface != PHY_INTERFACE_MODE_1000BASEKX &&
 	    phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
 	    phydev->interface != PHY_INTERFACE_MODE_XGMII &&
 	    phydev->interface != PHY_INTERFACE_MODE_USXGMII &&
 	    phydev->interface != PHY_INTERFACE_MODE_10GKR &&
-	    phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+	    phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+	    phydev->interface != PHY_INTERFACE_MODE_XAUI &&
+	    phydev->interface != PHY_INTERFACE_MODE_RXAUI)
 		return -ENODEV;
 
 	WARN(phydev->interface == PHY_INTERFACE_MODE_XGMII,