mbox series

[v1,0/4] Add HiFive Unmatched LEDs

Message ID 20220705210143.315151-1-emil.renner.berthing@canonical.com (mailing list archive)
Headers show
Series Add HiFive Unmatched LEDs | expand

Message

Emil Renner Berthing July 5, 2022, 9:01 p.m. UTC 
This series adds support for the two LEDs on the HiFive Unmatched
RISC-V board.

Emil Renner Berthing (4):
  leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors
  dt-bindings: leds: pwm-multicolor: Add active-low property
  leds: pwm-multicolor: Support active-low LEDs
  riscv: dts: sifive unmatched: Add PWM controlled LEDs

 .../bindings/leds/leds-pwm-multicolor.yaml    |  4 ++
 .../boot/dts/sifive/hifive-unmatched-a00.dts  | 42 +++++++++++++++++++
 drivers/leds/rgb/leds-pwm-multicolor.c        |  8 +++-
 3 files changed, 52 insertions(+), 2 deletions(-)

Comments

Pavel Machek July 17, 2022, 11:02 a.m. UTC | #1 
Hi!

> This series adds support for the two LEDs on the HiFive Unmatched
> RISC-V board.
> 
> Emil Renner Berthing (4):
>   leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors
>   dt-bindings: leds: pwm-multicolor: Add active-low property
>   leds: pwm-multicolor: Support active-low LEDs

Thank you, applied. Not taking the dts change

Best regards,
							Pavel
Palmer Dabbelt Aug. 11, 2022, 9:06 p.m. UTC | #2 
On Sun, 17 Jul 2022 04:02:49 PDT (-0700), pavel@ucw.cz wrote:
> Hi!
>
>> This series adds support for the two LEDs on the HiFive Unmatched
>> RISC-V board.
>> 
>> Emil Renner Berthing (4):
>>   leds: pwm-multicolor: Don't show -EPROBE_DEFER as errors
>>   dt-bindings: leds: pwm-multicolor: Add active-low property
>>   leds: pwm-multicolor: Support active-low LEDs
>
> Thank you, applied. Not taking the dts change

I took the DTS change (#4) on riscv/for-next.  Thanks!