| Message ID | 20220719205249.566684-1-ira.weiny@intel.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | CXL: Read CDAT | expand |
ira.weiny@ wrote: > From: Ira Weiny <ira.weiny@intel.com> > > > Details of changes are in the individual patches. > > Major changes from V14:[11] > Pick up Dan's V15 version of the CDAT patch > Fix up 3/7 with Jonathans cleanups > Drop valid check patch and deffer to ACPI vailidation later > > CXL drivers need various data which are provided through generic DOE mailboxes > as defined in the PCIe 6.0 spec.[1] > > One such data is the Coherent Device Attribute Table (CDAT). CDAT data provides > coherent information about the various devices in the system. It was developed > because systems no longer have a priori knowledge of all coherent devices > within a system. CDAT describes the coherent characteristics of the > components on the CXL bus separate from system configurations. The OS can > then, for example, use this information to form correct interleave sets. > > To begin reading the CDAT the OS must have support to access the DOE mailboxes > provided by the CXL devices. > > Because DOE is not specific to DOE but is provided within the PCI spec, the > series adds PCI DOE capability library functions. These functions allow for > the iteration of the DOE capabilities on a device as well as creating > pci_doe_mb structures which can control the operation of the DOE state machine. > > For now the iteration of and storage of the DOE mailboxes is done on memdev > objects within the CXL stack. When this is needed in more generic code this > can be lifted later. > > This work was tested using qemu. Looks good Ira, thanks for sticking with it, thanks Jonathan for getting it started and all the review plus test environment, and thanks Bjorn for the help steering this away from an aux-bus mistake. All applied and soaking on cxl/pending, but will move to cxl/next shortly.
From: Ira Weiny <ira.weiny@intel.com> Details of changes are in the individual patches. Major changes from V14:[11] Pick up Dan's V15 version of the CDAT patch Fix up 3/7 with Jonathans cleanups Drop valid check patch and deffer to ACPI vailidation later CXL drivers need various data which are provided through generic DOE mailboxes as defined in the PCIe 6.0 spec.[1] One such data is the Coherent Device Attribute Table (CDAT). CDAT data provides coherent information about the various devices in the system. It was developed because systems no longer have a priori knowledge of all coherent devices within a system. CDAT describes the coherent characteristics of the components on the CXL bus separate from system configurations. The OS can then, for example, use this information to form correct interleave sets. To begin reading the CDAT the OS must have support to access the DOE mailboxes provided by the CXL devices. Because DOE is not specific to DOE but is provided within the PCI spec, the series adds PCI DOE capability library functions. These functions allow for the iteration of the DOE capabilities on a device as well as creating pci_doe_mb structures which can control the operation of the DOE state machine. For now the iteration of and storage of the DOE mailboxes is done on memdev objects within the CXL stack. When this is needed in more generic code this can be lifted later. This work was tested using qemu. [0] https://lore.kernel.org/linux-cxl/20211105235056.3711389-1-ira.weiny@intel.com/ [1] https://pcisig.com/specifications [2] https://lore.kernel.org/qemu-devel/20210202005948.241655-1-ben.widawsky@intel.com/ [3] https://lore.kernel.org/linux-cxl/20220201071952.900068-1-ira.weiny@intel.com/ [4] https://lore.kernel.org/linux-cxl/20220330235920.2800929-1-ira.weiny@intel.com/ [5] https://lore.kernel.org/linux-cxl/20220414203237.2198665-1-ira.weiny@intel.com/ [6] https://lore.kernel.org/linux-cxl/20220531152632.1397976-1-ira.weiny@intel.com/ [7] https://lore.kernel.org/linux-cxl/20220605005049.2155874-1-ira.weiny@intel.com/ [8] https://lore.kernel.org/linux-cxl/20220610202259.3544623-1-ira.weiny@intel.com/ [9] https://lore.kernel.org/linux-cxl/20220628041527.742333-1-ira.weiny@intel.com/ [10] https://lore.kernel.org/linux-cxl/20220705154932.2141021-1-ira.weiny@intel.com/ [11] https://lore.kernel.org/linux-cxl/20220715030424.462963-1-ira.weiny@intel.com/ Previous changes ================ Major changes from V13:[10] Dan minor updates Willy's suggestion of documentation is good but I'm deferring it until we get the location of the PCI mailboxes settled. Drop retry CDAT patch Drop DSMAS patch Rebased on latest cxl-pending Changes from V12:[9] A couple of bug fixes in the new XArray stuff Remove the IRQ support because I did not realize how that worked and it was complicating things. Remove busy retries and replace with an error as there is no good way to ensure it will work. Other code clean ups mentioned in the individual patches. Changes from V11:[8] The major change in this version is to remove the workqueue from the internal implementation of the state machine. A single ordered workqueue within each mailbox processes tasks submitted. This workqueue takes care of all locking and guarantees that tasks are completed in the order submitted. Any synchronization which is required between tasks will need to be handled by the user of the mailbox. However, the user can depend on work items being completed in the order they are submitted. So a single thread submitter is guaranteed to get all work items completed in order. This also aids in the support of a single mailbox supporting multiple protocols. Each protocol could have a separate thread submitting tasks for that protocol. The mailbox object will ensure that each protocol task is complete before another task starts. But multiple user threads can be submitting tasks for different protocols all at the same time without regard to other protocols being used. XArrays are used throughout the series. Other minor changes are noted in the individual patches. Changes from V10:[7] Address Ben Widawsky's comments Protect against potentially malicious devices. Fix ownership issue of cdat_mb Changes from V9:[6] Address feedback from Lukas Wunner, Davidlohr Bueso, Jonathan Cameron, Alison Schofield, and Ben Widawsky Details in each individual patch. Changes from V8:[5] For this version I've punted a bit to get it out and drop the auxiliary bus functionality. I like where Jonathan is going with the port driver idea. I think eventually the irq/mailbox creation will need to be more generic in a PCI port driver. I've modeled this version on such an architecture but used the CXL port for the time being. From Dan Drop the auxiliary bus/device From Jonathan Cleanups From Bjorn Clean up commit messages move pci-doe.c to doe.c Clean up PCI spec references Ensure all messages use pci_*() Add offset to error messages to distinguish mailboxes use hex for DOE offsets Print 4 nibbles for Vendor ID and 2 for type. s/irq/IRQ in comments Fix long lines Fix typos Changes from V7:[4] Avoid code bloat by making pci-doe.c conditional on CONFIG_PCI_DOE which is auto selected by the CXL_PCI config option. Minor code clean ups Fix bug in pci_doe_supports_prot() Rebase to cxl-pending Changes from V6:[3] The big change is the removal of the auxiliary bus code from the PCI layer. The auxiliary bus usage is now in the CXL layer. The PCI layer provides helpers for subsystems to utilize DOE mailboxes by creating a pci_doe_mb object which controls a state machine for that mailbox capability. The CXL layer wraps this object in an auxiliary device and driver which can then be used to determine if the kernel is controlling the capability or it is available to be used by user space. Reads from user space via lspci are allowed. Writes are allowed but flagged via a tainting the kernel. Feedback from Bjorn, Jonathan, and Dan Details in each patch Changes from V5:[0] Rework the patch set to split PCI vs CXL changes Also make each change a bit more stand alone for easier review Add cxl_cdat structure Put CDAT related data structures in cdat.h Clarify some device lifetimes with comments Incorporate feedback from Jonathan, Bjorn and Dan The bigest change is placing the DOE scanning code into the pci_doe driver (part of the PCI codre). Validate the CDAT when it is read rather than before DSMAS parsing Do not report DSMAS failure as an error, report a warning and keep going. Retry reading the table 1 time. Update commit messages and this cover letter Ira Weiny (4): PCI: Replace magic constant for PCI Sig Vendor ID cxl/pci: Create PCI DOE mailbox's for memory devices driver-core: Introduce BIN_ATTR_ADMIN_{RO,RW} cxl/port: Read CDAT table Jonathan Cameron (2): PCI: Add vendor ID for the PCI SIG PCI/DOE: Add DOE mailbox support functions .clang-format | 1 + Documentation/ABI/testing/sysfs-bus-cxl | 10 + drivers/cxl/Kconfig | 1 + drivers/cxl/core/pci.c | 173 ++++++++ drivers/cxl/cxl.h | 7 + drivers/cxl/cxlmem.h | 3 + drivers/cxl/cxlpci.h | 1 + drivers/cxl/pci.c | 44 ++ drivers/cxl/port.c | 53 +++ drivers/pci/Kconfig | 3 + drivers/pci/Makefile | 1 + drivers/pci/doe.c | 536 ++++++++++++++++++++++++ drivers/pci/probe.c | 2 +- include/linux/pci-doe.h | 77 ++++ include/linux/pci_ids.h | 1 + include/linux/sysfs.h | 16 + include/uapi/linux/pci_regs.h | 29 +- 17 files changed, 956 insertions(+), 2 deletions(-) create mode 100644 drivers/pci/doe.c create mode 100644 include/linux/pci-doe.h base-commit: b060edfd8cdd52bc8648392500bf152a8dd6d4c5