diff mbox series

[V2,2/3] arm64: dts: broadcom: bcm4908: add LEDs controller block

Message ID 20220718132100.13277-2-zajec5@gmail.com (mailing list archive)
State New, archived
Headers show
Series [V2,1/3] arm64: dts: broadcom: bcm4908: add remaining LED pins | expand

Commit Message

Rafał Miłecki July 18, 2022, 1:20 p.m. UTC 
From: Rafał Miłecki <rafal@milecki.pl>

BCM4908 includes LEDs controller that supports multiple brightness
levels & hardware blinking.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Florian Fainelli July 21, 2022, 11:16 p.m. UTC | #1 
On Mon, 18 Jul 2022 15:20:59 +0200, Rafał Miłecki <zajec5@gmail.com> wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
> 
> BCM4908 includes LEDs controller that supports multiple brightness
> levels & hardware blinking.
> 
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---

Applied to https://github.com/Broadcom/stblinux/commits/devicetree-arm64/next, thanks!
--
Florian
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index db9f3d8e2bc8..981a0eb9da6f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -515,6 +515,14 @@  uart0: serial@640 {
 			status = "okay";
 		};
 
+		leds: leds@800 {
+			compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
+			reg = <0x800 0xdc>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		nand-controller@1800 {
 			#address-cells = <1>;
 			#size-cells = <0>;