Message ID | tencent_ED01C585DBD86EFB91CD8074FB0460C3BA06@qq.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [1/2] dts/amlogic: Add MagicBox M16S support | expand |
Hi, first of all: thank you for your patches! On Sat, Jul 23, 2022 at 5:56 PM Zhang Ning <zhangn1985@qq.com> wrote: > I am not sure if the media subsystem requires it but most subsystem maintainers want a description here. See for example commit 7bb53f361c59b ("media: rc: add keymap for Tanix TX5 max remote") which has been accepted previously. > Signed-off-by: Zhang Ning <zhangn1985@qq.com> > --- > .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++ This should be part of the .dts patch (patch #1) > drivers/media/rc/keymaps/Makefile | 1 + > drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++ > include/media/rc-map.h | 1 + Additionally we need a dt-bindings patch so the new value is recognized by the .dts validation. See commit d2fccf94495e57 ("media: dt-bindings: media: add new rc map name") for an example. dt-binding patches typically go first in the series. [...] > +static struct rc_map_table magicbox[] = { > + { 40791, KEY_POWER }, > + { 40842, KEY_MUTE }, // M > + > + { 40771, KEY_UP }, > + { 40714, KEY_DOWN }, > + { 40710, KEY_LEFT }, > + { 40718, KEY_RIGHT }, > + { 40706, KEY_OK }, > + > + { 40775, KEY_HOME }, > + { 40783, KEY_BACK }, > + { 40726, KEY_MENU }, > + > + { 40959, KEY_VOLUMEDOWN }, > + { 40797, KEY_VOLUMEUP }, I checked a few other keymaps and they're using hex values for the key code. That said, I am not familiar with the keymap code, so let's see what the media maintainers think. Best regards, Martin
On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote: > Signed-off-by: Zhang Ning <zhangn1985@qq.com> > --- > .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++ > drivers/media/rc/keymaps/Makefile | 1 + > drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++ > include/media/rc-map.h | 1 + > 4 files changed, 61 insertions(+) > create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts > index 464de73d2f0f..69e72687ac9c 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts > @@ -34,3 +34,7 @@ ðmac { > &sdio_pwrseq { > reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>; > }; > + > +&ir { > + linux,rc-map-name = "rc-magicbox"; > +}; As has been pointed out already, this should go a in a different patch. > diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile > index f513ff5caf4e..02c1c2150f03 100644 > --- a/drivers/media/rc/keymaps/Makefile > +++ b/drivers/media/rc/keymaps/Makefile > @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \ > rc-kworld-plus-tv-analog.o \ > rc-leadtek-y04g0051.o \ > rc-lme2510.o \ > + rc-magicbox.o \ > rc-manli.o \ > rc-mecool-kiii-pro.o \ > rc-mecool-kii-pro.o \ > diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c > new file mode 100644 > index 000000000000..7dd3afd8a42c > --- /dev/null > +++ b/drivers/media/rc/keymaps/rc-magicbox.c > @@ -0,0 +1,55 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +// > +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com> > + > +/* > + * Keytable for the MagicBox M16S remote control > + */ > + > +#include <media/rc-map.h> > +#include <linux/module.h> > + > + > +static struct rc_map_table magicbox[] = { > + { 40791, KEY_POWER }, > + { 40842, KEY_MUTE }, // M This comment needs elaboration. What does M mean? > + { 40771, KEY_UP }, > + { 40714, KEY_DOWN }, > + { 40710, KEY_LEFT }, > + { 40718, KEY_RIGHT }, > + { 40706, KEY_OK }, > + > + { 40775, KEY_HOME }, > + { 40783, KEY_BACK }, > + { 40726, KEY_MENU }, > + > + { 40959, KEY_VOLUMEDOWN }, > + { 40797, KEY_VOLUMEUP }, Please use hex values here, they make much more sense for nec protocol. > + Remove blank line. > +}; > + > +static struct rc_map_list magicbox_map = { > + .map = { > + .scan = magicbox, > + .size = ARRAY_SIZE(magicbox), > + .rc_proto = RC_PROTO_NEC, > + .name = RC_MAP_MAGICBOX, > + } > +}; > + > +static int __init init_rc_map_magicbox(void) > +{ > + return rc_map_register(&magicbox_map); > +} > + > +static void __exit exit_rc_map_magicbox(void) > +{ > + rc_map_unregister(&magicbox_map); > +} > + > +module_init(init_rc_map_magicbox) > +module_exit(exit_rc_map_magicbox) > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>"); > diff --git a/include/media/rc-map.h b/include/media/rc-map.h > index 793b54342dff..656217b8e91b 100644 > --- a/include/media/rc-map.h > +++ b/include/media/rc-map.h > @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name); > #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" > #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" > #define RC_MAP_LME2510 "rc-lme2510" > +#define RC_MAP_MAGICBOX "rc-magicbox" > #define RC_MAP_MANLI "rc-manli" > #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro" > #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro" You should update Documentation/devicetree/bindings/media/rc.yaml as well. Thanks, Sean
Hi Sean thank you for review. I sent v4 before see your review. On Sun, Jul 24, 2022 at 02:44:28PM +0100, Sean Young wrote: > On Sat, Jul 23, 2022 at 11:55:02PM +0800, Zhang Ning wrote: > > Signed-off-by: Zhang Ning <zhangn1985@qq.com> > > --- > > .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++ > > drivers/media/rc/keymaps/Makefile | 1 + > > drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++ > > include/media/rc-map.h | 1 + > > 4 files changed, 61 insertions(+) > > create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c > > > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts > > index 464de73d2f0f..69e72687ac9c 100644 > > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts > > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts > > @@ -34,3 +34,7 @@ ðmac { > > &sdio_pwrseq { > > reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>; > > }; > > + > > +&ir { > > + linux,rc-map-name = "rc-magicbox"; > > +}; > > As has been pointed out already, this should go a in a different patch. already do it in v4 > > > diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile > > index f513ff5caf4e..02c1c2150f03 100644 > > --- a/drivers/media/rc/keymaps/Makefile > > +++ b/drivers/media/rc/keymaps/Makefile > > @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \ > > rc-kworld-plus-tv-analog.o \ > > rc-leadtek-y04g0051.o \ > > rc-lme2510.o \ > > + rc-magicbox.o \ > > rc-manli.o \ > > rc-mecool-kiii-pro.o \ > > rc-mecool-kii-pro.o \ > > diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c > > new file mode 100644 > > index 000000000000..7dd3afd8a42c > > --- /dev/null > > +++ b/drivers/media/rc/keymaps/rc-magicbox.c > > @@ -0,0 +1,55 @@ > > +// SPDX-License-Identifier: GPL-2.0+ > > +// > > +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com> > > + > > +/* > > + * Keytable for the MagicBox M16S remote control > > + */ > > + > > +#include <media/rc-map.h> > > +#include <linux/module.h> > > + > > + > > +static struct rc_map_table magicbox[] = { > > + { 40791, KEY_POWER }, > > + { 40842, KEY_MUTE }, // M > > This comment needs elaboration. What does M mean? this is answered in v4. a key labeled with "M" as Magic key in vendor OS. > > > + { 40771, KEY_UP }, > > + { 40714, KEY_DOWN }, > > + { 40710, KEY_LEFT }, > > + { 40718, KEY_RIGHT }, > > + { 40706, KEY_OK }, > > + > > + { 40775, KEY_HOME }, > > + { 40783, KEY_BACK }, > > + { 40726, KEY_MENU }, > > + > > + { 40959, KEY_VOLUMEDOWN }, > > + { 40797, KEY_VOLUMEUP }, > > Please use hex values here, they make much more sense for nec protocol. in v4. > > > + > > Remove blank line. will do it in v5. > > > +}; > > + > > +static struct rc_map_list magicbox_map = { > > + .map = { > > + .scan = magicbox, > > + .size = ARRAY_SIZE(magicbox), > > + .rc_proto = RC_PROTO_NEC, > > + .name = RC_MAP_MAGICBOX, > > + } > > +}; > > + > > +static int __init init_rc_map_magicbox(void) > > +{ > > + return rc_map_register(&magicbox_map); > > +} > > + > > +static void __exit exit_rc_map_magicbox(void) > > +{ > > + rc_map_unregister(&magicbox_map); > > +} > > + > > +module_init(init_rc_map_magicbox) > > +module_exit(exit_rc_map_magicbox) > > + > > +MODULE_LICENSE("GPL"); > > +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>"); > > diff --git a/include/media/rc-map.h b/include/media/rc-map.h > > index 793b54342dff..656217b8e91b 100644 > > --- a/include/media/rc-map.h > > +++ b/include/media/rc-map.h > > @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name); > > #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" > > #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" > > #define RC_MAP_LME2510 "rc-lme2510" > > +#define RC_MAP_MAGICBOX "rc-magicbox" > > #define RC_MAP_MANLI "rc-manli" > > #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro" > > #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro" > > You should update Documentation/devicetree/bindings/media/rc.yaml as well. alread do it in v4. > > Thanks, > > Sean
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts index 464de73d2f0f..69e72687ac9c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts @@ -34,3 +34,7 @@ ðmac { &sdio_pwrseq { reset-gpios = <&gpio GPIODV_2 GPIO_ACTIVE_LOW>; }; + +&ir { + linux,rc-map-name = "rc-magicbox"; +}; diff --git a/drivers/media/rc/keymaps/Makefile b/drivers/media/rc/keymaps/Makefile index f513ff5caf4e..02c1c2150f03 100644 --- a/drivers/media/rc/keymaps/Makefile +++ b/drivers/media/rc/keymaps/Makefile @@ -71,6 +71,7 @@ obj-$(CONFIG_RC_MAP) += \ rc-kworld-plus-tv-analog.o \ rc-leadtek-y04g0051.o \ rc-lme2510.o \ + rc-magicbox.o \ rc-manli.o \ rc-mecool-kiii-pro.o \ rc-mecool-kii-pro.o \ diff --git a/drivers/media/rc/keymaps/rc-magicbox.c b/drivers/media/rc/keymaps/rc-magicbox.c new file mode 100644 index 000000000000..7dd3afd8a42c --- /dev/null +++ b/drivers/media/rc/keymaps/rc-magicbox.c @@ -0,0 +1,55 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2022 Zhang Ning <zhangn1985@qq.com> + +/* + * Keytable for the MagicBox M16S remote control + */ + +#include <media/rc-map.h> +#include <linux/module.h> + + +static struct rc_map_table magicbox[] = { + { 40791, KEY_POWER }, + { 40842, KEY_MUTE }, // M + + { 40771, KEY_UP }, + { 40714, KEY_DOWN }, + { 40710, KEY_LEFT }, + { 40718, KEY_RIGHT }, + { 40706, KEY_OK }, + + { 40775, KEY_HOME }, + { 40783, KEY_BACK }, + { 40726, KEY_MENU }, + + { 40959, KEY_VOLUMEDOWN }, + { 40797, KEY_VOLUMEUP }, + +}; + +static struct rc_map_list magicbox_map = { + .map = { + .scan = magicbox, + .size = ARRAY_SIZE(magicbox), + .rc_proto = RC_PROTO_NEC, + .name = RC_MAP_MAGICBOX, + } +}; + +static int __init init_rc_map_magicbox(void) +{ + return rc_map_register(&magicbox_map); +} + +static void __exit exit_rc_map_magicbox(void) +{ + rc_map_unregister(&magicbox_map); +} + +module_init(init_rc_map_magicbox) +module_exit(exit_rc_map_magicbox) + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Zhang Ning <zhangn1985@qq.com>"); diff --git a/include/media/rc-map.h b/include/media/rc-map.h index 793b54342dff..656217b8e91b 100644 --- a/include/media/rc-map.h +++ b/include/media/rc-map.h @@ -277,6 +277,7 @@ struct rc_map *rc_map_get(const char *name); #define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" #define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" #define RC_MAP_LME2510 "rc-lme2510" +#define RC_MAP_MAGICBOX "rc-magicbox" #define RC_MAP_MANLI "rc-manli" #define RC_MAP_MECOOL_KII_PRO "rc-mecool-kii-pro" #define RC_MAP_MECOOL_KIII_PRO "rc-mecool-kiii-pro"
Signed-off-by: Zhang Ning <zhangn1985@qq.com> --- .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 4 ++ drivers/media/rc/keymaps/Makefile | 1 + drivers/media/rc/keymaps/rc-magicbox.c | 55 +++++++++++++++++++ include/media/rc-map.h | 1 + 4 files changed, 61 insertions(+) create mode 100644 drivers/media/rc/keymaps/rc-magicbox.c