| Message ID | 20220608144516.172460444@infradead.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | cpuidle,rcu: Cleanup the mess | expand |
On Wed, Jun 8, 2022 at 4:47 PM Peter Zijlstra <peterz@infradead.org> wrote: > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > Xeons") wrecked intel_idle in two ways: > > - must not have tracing in idle functions > - must return with IRQs disabled > > Additionally, it added a branch for no good reason. > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> And do I think correctly that this can be applied without the rest of the series? > --- > drivers/idle/intel_idle.c | 48 +++++++++++++++++++++++++++++++++++----------- > 1 file changed, 37 insertions(+), 11 deletions(-) > > --- a/drivers/idle/intel_idle.c > +++ b/drivers/idle/intel_idle.c > @@ -129,21 +137,37 @@ static unsigned int mwait_substates __in > * > * Must be called under local_irq_disable(). > */ > + > -static __cpuidle int intel_idle(struct cpuidle_device *dev, > - struct cpuidle_driver *drv, int index) > +static __always_inline int __intel_idle(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int index) > { > struct cpuidle_state *state = &drv->states[index]; > unsigned long eax = flg2MWAIT(state->flags); > unsigned long ecx = 1; /* break on interrupt flag */ > > - if (state->flags & CPUIDLE_FLAG_IRQ_ENABLE) > - local_irq_enable(); > - > mwait_idle_with_hints(eax, ecx); > > return index; > } > > +static __cpuidle int intel_idle(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int index) > +{ > + return __intel_idle(dev, drv, index); > +} > + > +static __cpuidle int intel_idle_irq(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int index) > +{ > + int ret; > + > + raw_local_irq_enable(); > + ret = __intel_idle(dev, drv, index); > + raw_local_irq_disable(); > + > + return ret; > +} > + > /** > * intel_idle_s2idle - Ask the processor to enter the given idle state. > * @dev: cpuidle device of the target CPU. > @@ -1801,6 +1824,9 @@ static void __init intel_idle_init_cstat > /* Structure copy. */ > drv->states[drv->state_count] = cpuidle_state_table[cstate]; > > + if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_IRQ_ENABLE) > + drv->states[drv->state_count].enter = intel_idle_irq; > + > if ((disabled_states_mask & BIT(drv->state_count)) || > ((icpu->use_acpi || force_use_acpi) && > intel_idle_off_by_default(mwait_hint) && > >
On Wed, Jun 08, 2022 at 05:01:05PM +0200, Rafael J. Wysocki wrote: > On Wed, Jun 8, 2022 at 4:47 PM Peter Zijlstra <peterz@infradead.org> wrote: > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > Xeons") wrecked intel_idle in two ways: > > > > - must not have tracing in idle functions > > - must return with IRQs disabled > > > > Additionally, it added a branch for no good reason. > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > And do I think correctly that this can be applied without the rest of > the series? Yeah, I don't think this relies on any of the preceding patches. If you want to route this through the pm/fixes tree that's fine. Thanks!
On Wed, Jun 8, 2022 at 5:48 PM Peter Zijlstra <peterz@infradead.org> wrote: > > On Wed, Jun 08, 2022 at 05:01:05PM +0200, Rafael J. Wysocki wrote: > > On Wed, Jun 8, 2022 at 4:47 PM Peter Zijlstra <peterz@infradead.org> wrote: > > > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > Xeons") wrecked intel_idle in two ways: > > > > > > - must not have tracing in idle functions > > > - must return with IRQs disabled > > > > > > Additionally, it added a branch for no good reason. > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> > > > > And do I think correctly that this can be applied without the rest of > > the series? > > Yeah, I don't think this relies on any of the preceding patches. If you > want to route this through the pm/fixes tree that's fine. OK, thanks, applied (and I moved the intel_idle() kerneldoc so it is next to the function to avoid the docs build warning).
Hi Peter, On Wed, 08 Jun 2022 16:27:27 +0200, Peter Zijlstra <peterz@infradead.org> wrote: > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > Xeons") wrecked intel_idle in two ways: > > - must not have tracing in idle functions > - must return with IRQs disabled > > Additionally, it added a branch for no good reason. > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > --- > drivers/idle/intel_idle.c | 48 > +++++++++++++++++++++++++++++++++++----------- 1 file changed, 37 > insertions(+), 11 deletions(-) > > --- a/drivers/idle/intel_idle.c > +++ b/drivers/idle/intel_idle.c > @@ -129,21 +137,37 @@ static unsigned int mwait_substates __in > * > * Must be called under local_irq_disable(). > */ nit: this comment is no long true, right? > + > -static __cpuidle int intel_idle(struct cpuidle_device *dev, > - struct cpuidle_driver *drv, int index) > +static __always_inline int __intel_idle(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int > index) { > struct cpuidle_state *state = &drv->states[index]; > unsigned long eax = flg2MWAIT(state->flags); > unsigned long ecx = 1; /* break on interrupt flag */ > > - if (state->flags & CPUIDLE_FLAG_IRQ_ENABLE) > - local_irq_enable(); > - > mwait_idle_with_hints(eax, ecx); > > return index; > } > > +static __cpuidle int intel_idle(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int index) > +{ > + return __intel_idle(dev, drv, index); > +} > + > +static __cpuidle int intel_idle_irq(struct cpuidle_device *dev, > + struct cpuidle_driver *drv, int > index) +{ > + int ret; > + > + raw_local_irq_enable(); > + ret = __intel_idle(dev, drv, index); > + raw_local_irq_disable(); > + > + return ret; > +} > + > /** > * intel_idle_s2idle - Ask the processor to enter the given idle state. > * @dev: cpuidle device of the target CPU. > @@ -1801,6 +1824,9 @@ static void __init intel_idle_init_cstat > /* Structure copy. */ > drv->states[drv->state_count] = > cpuidle_state_table[cstate]; > + if (cpuidle_state_table[cstate].flags & > CPUIDLE_FLAG_IRQ_ENABLE) > + drv->states[drv->state_count].enter = > intel_idle_irq; + > if ((disabled_states_mask & BIT(drv->state_count)) || > ((icpu->use_acpi || force_use_acpi) && > intel_idle_off_by_default(mwait_hint) && > > Thanks, Jacob
On Thu, Jun 09, 2022 at 04:49:21PM -0700, Jacob Pan wrote: > Hi Peter, > > On Wed, 08 Jun 2022 16:27:27 +0200, Peter Zijlstra <peterz@infradead.org> > wrote: > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > Xeons") wrecked intel_idle in two ways: > > > > - must not have tracing in idle functions > > - must return with IRQs disabled > > > > Additionally, it added a branch for no good reason. > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > --- > > drivers/idle/intel_idle.c | 48 > > +++++++++++++++++++++++++++++++++++----------- 1 file changed, 37 > > insertions(+), 11 deletions(-) > > > > --- a/drivers/idle/intel_idle.c > > +++ b/drivers/idle/intel_idle.c > > @@ -129,21 +137,37 @@ static unsigned int mwait_substates __in > > * > > * Must be called under local_irq_disable(). > > */ > nit: this comment is no long true, right? It still is, all the idle routines are called with interrupts disabled, but must also exit with interrupts disabled. If the idle method requires interrupts to be enabled, it must be sure to disable them again before returning. Given all the RCU/tracing concerns it must use raw_local_irq_*() for this though.
Hi Peter, On Mon, 13 Jun 2022 10:44:22 +0200, Peter Zijlstra <peterz@infradead.org> wrote: > On Thu, Jun 09, 2022 at 04:49:21PM -0700, Jacob Pan wrote: > > Hi Peter, > > > > On Wed, 08 Jun 2022 16:27:27 +0200, Peter Zijlstra > > <peterz@infradead.org> wrote: > > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > Xeons") wrecked intel_idle in two ways: > > > > > > - must not have tracing in idle functions > > > - must return with IRQs disabled > > > > > > Additionally, it added a branch for no good reason. > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on > > > Xeons") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > --- > > > drivers/idle/intel_idle.c | 48 > > > +++++++++++++++++++++++++++++++++++----------- 1 file changed, 37 > > > insertions(+), 11 deletions(-) > > > > > > --- a/drivers/idle/intel_idle.c > > > +++ b/drivers/idle/intel_idle.c > > > @@ -129,21 +137,37 @@ static unsigned int mwait_substates __in > > > * > > > * Must be called under local_irq_disable(). > > > */ > > nit: this comment is no long true, right? > > It still is, all the idle routines are called with interrupts disabled, > but must also exit with interrupts disabled. > > If the idle method requires interrupts to be enabled, it must be sure to > disable them again before returning. Given all the RCU/tracing concerns > it must use raw_local_irq_*() for this though. Makes sense, it is just little confusing when the immediate caller does raw_local_irq_enable() which does not cancel out local_irq_disable(). Thanks, Jacob
On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > Xeons") wrecked intel_idle in two ways: > > - must not have tracing in idle functions > - must return with IRQs disabled > > Additionally, it added a branch for no good reason. > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> After this change was introduced, I am seeing "WARNING: suspicious RCU usage" when booting a kernel with debug options compiled in. Please see the attached dmesg output. The issue starts with commit 32d4fd5751ea and is still present in v5.19-rc8. I'm not sure, is this too late to fix or revert in v5.19 final ? Thanks, -- Michel "walken" Lespinasse [ 0.000000] microcode: microcode updated early to revision 0x2006d05, date = 2021-11-13 [ 0.000000] Linux version 5.19.0-rc8-test-00003-ge3a8d97e6a35 (walken@zeus) (gcc (Debian 8.3.0-6) 8.3.0, GNU ld (GNU Binutils for Debian) 2.31.1) #1 SMP PREEMPT_DYNAMIC Mon Jul 25 00:32:16 PDT 2022 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.19.0-rc8-test-00003-ge3a8d97e6a35 root=/dev/mapper/budai--vg-root ro consoleblank=600 quiet [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 [ 0.000000] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64 [ 0.000000] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512 [ 0.000000] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024 [ 0.000000] x86/fpu: Enabled xstate features 0xff, context size is 2560 bytes, using 'compacted' format. [ 0.000000] signal: max sigframe size: 3632 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000062a8efff] usable [ 0.000000] BIOS-e820: [mem 0x0000000062a8f000-0x000000006aef4fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006aef5000-0x000000006b0c2fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000006b0c3000-0x000000006be0dfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000006be0e000-0x000000006c7f1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006c7f2000-0x000000006c8e5fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000006c8e6000-0x000000006c8e6fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000006c8e7000-0x000000006c9a7fff] type 20 [ 0.000000] BIOS-e820: [mem 0x000000006c9a8000-0x000000006e6fffff] usable [ 0.000000] BIOS-e820: [mem 0x000000006e700000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000fe010fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000107fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.70 by American Megatrends [ 0.000000] efi: TPMFinalLog=0x6bd97000 ACPI=0x6b0c2000 ACPI 2.0=0x6b0c2014 SMBIOS=0x6c47b000 SMBIOS 3.0=0x6c47a000 MEMATTR=0x5d04d018 ESRT=0x604e0718 [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 0.000000] tsc: Detected 3700.000 MHz processor [ 0.000000] tsc: Detected 3699.850 MHz TSC [ 0.000278] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000281] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000289] last_pfn = 0x1080000 max_arch_pfn = 0x400000000 [ 0.000397] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001626] e820: update [mem 0x7e000000-0xffffffff] usable ==> reserved [ 0.001632] last_pfn = 0x6e700 max_arch_pfn = 0x400000000 [ 0.007772] esrt: Reserving ESRT space from 0x00000000604e0718 to 0x00000000604e0778. [ 0.007776] e820: update [mem 0x604e0000-0x604e0fff] usable ==> reserved [ 0.118600] Secure boot could not be determined [ 0.118602] RAMDISK: [mem 0x3629b000-0x37144fff] [ 0.118605] ACPI: Early table checksum verification disabled [ 0.118608] ACPI: RSDP 0x000000006B0C2014 000024 (v02 LENOVO) [ 0.118612] ACPI: XSDT 0x000000006B0C1728 00013C (v01 LENOVO TC-S03 00001330 AMI 01000013) [ 0.118617] ACPI: FACP 0x000000006B0C0000 000114 (v06 LENOVO TC-S03 00001330 AMI 00010013) [ 0.118622] ACPI: DSDT 0x000000006AFFF000 0C0B0C (v02 LENOVO TC-S03 00001330 INTL 20160422) [ 0.118625] ACPI: FACS 0x000000006BD96000 000040 [ 0.118628] ACPI: FIDT 0x000000006AFFE000 00009C (v01 LENOVO TC-S03 00001330 AMI 00010013) [ 0.118631] ACPI: MCFG 0x000000006AFFD000 00003C (v01 LENOVO TC-S03 00001330 MSFT 00000097) [ 0.118634] ACPI: HPET 0x000000006AFFC000 000038 (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118637] ACPI: APIC 0x000000006AFFB000 00071E (v03 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118640] ACPI: MIGT 0x000000006AFFA000 000040 (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118643] ACPI: MSCT 0x000000006AFF9000 00004E (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118646] ACPI: PCAT 0x000000006AFF8000 000068 (v02 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118649] ACPI: PCCT 0x000000006AFF7000 00006E (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118652] ACPI: RASF 0x000000006AFF6000 000030 (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118655] ACPI: SLIT 0x000000006AFF5000 00006C (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118657] ACPI: SRAT 0x000000006AFF4000 000B70 (v03 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118660] ACPI: SVOS 0x000000006AFF3000 000032 (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118663] ACPI: WDDT 0x000000006AFF2000 000040 (v01 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118666] ACPI: OEM4 0x000000006AFC8000 029A72 (v02 INTEL CPU CST 00003000 INTL 20160422) [ 0.118669] ACPI: OEM1 0x000000006AFBD000 00ABCB (v02 INTEL CPU EIST 00003000 INTL 20160422) [ 0.118672] ACPI: OEM2 0x000000006AFAB000 011208 (v02 INTEL CPU HWP 00003000 INTL 20160422) [ 0.118675] ACPI: SSDT 0x000000006AF9D000 00D427 (v02 LENOVO TC-S03 00001330 INTL 20160422) [ 0.118678] ACPI: NITR 0x000000006AF9C000 000071 (v02 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118681] ACPI: LPIT 0x000000006AF9A000 000094 (v01 LENOVO TC-S03 00001330 MSFT 0000005F) [ 0.118684] ACPI: WDAT 0x000000006AF98000 000134 (v01 LENOVO TC-S03 00001330 MSFT 0000005F) [ 0.118687] ACPI: SSDT 0x000000006AF94000 003002 (v02 LENOVO TC-S03 00001330 INTL 20160422) [ 0.118690] ACPI: DBGP 0x000000006AF93000 000034 (v01 LENOVO TC-S03 00001330 MSFT 0000005F) [ 0.118693] ACPI: DBG2 0x000000006AF92000 000054 (v00 LENOVO TC-S03 00001330 MSFT 0000005F) [ 0.118696] ACPI: BGRT 0x000000006AF91000 000038 (v01 LENOVO TC-S03 00001330 AMI 00010013) [ 0.118699] ACPI: TPM2 0x000000006AF90000 00004C (v03 LENOVO TC-S03 00001330 AMI 00000000) [ 0.118701] ACPI: LUFT 0x000000006AF5B000 0349E2 (v01 LENOVO TC-S03 00001330 AMI 00010013) [ 0.118704] ACPI: HEST 0x000000006AF5A000 0000A8 (v01 LENOVO TC-S03 00001330 INTL 00000001) [ 0.118707] ACPI: BERT 0x000000006AF59000 000030 (v01 LENOVO TC-S03 00001330 INTL 00000001) [ 0.118710] ACPI: ERST 0x000000006AF58000 000230 (v01 LENOVO TC-S03 00001330 INTL 00000001) [ 0.118713] ACPI: EINJ 0x000000006AF57000 000150 (v01 LENOVO TC-S03 00001330 INTL 00000001) [ 0.118716] ACPI: ASF! 0x000000006AF56000 0000A0 (v32 LENOVO TC-S03 00001330 TFSM 000F4240) [ 0.118719] ACPI: WSMT 0x000000006AF99000 000028 (v01 LENOVO TC-S03 00001330 AMI 00010013) [ 0.118722] ACPI: SSDT 0x000000006AF9B000 000ACE (v02 LENOVO TC-S03 00001330 INTL 20091013) [ 0.118725] ACPI: FPDT 0x000000006AF54000 000044 (v01 LENOVO TC-S03 00001330 AMI 01000013) [ 0.118727] ACPI: Reserving FACP table memory at [mem 0x6b0c0000-0x6b0c0113] [ 0.118729] ACPI: Reserving DSDT table memory at [mem 0x6afff000-0x6b0bfb0b] [ 0.118730] ACPI: Reserving FACS table memory at [mem 0x6bd96000-0x6bd9603f] [ 0.118731] ACPI: Reserving FIDT table memory at [mem 0x6affe000-0x6affe09b] [ 0.118732] ACPI: Reserving MCFG table memory at [mem 0x6affd000-0x6affd03b] [ 0.118733] ACPI: Reserving HPET table memory at [mem 0x6affc000-0x6affc037] [ 0.118734] ACPI: Reserving APIC table memory at [mem 0x6affb000-0x6affb71d] [ 0.118735] ACPI: Reserving MIGT table memory at [mem 0x6affa000-0x6affa03f] [ 0.118736] ACPI: Reserving MSCT table memory at [mem 0x6aff9000-0x6aff904d] [ 0.118737] ACPI: Reserving PCAT table memory at [mem 0x6aff8000-0x6aff8067] [ 0.118737] ACPI: Reserving PCCT table memory at [mem 0x6aff7000-0x6aff706d] [ 0.118738] ACPI: Reserving RASF table memory at [mem 0x6aff6000-0x6aff602f] [ 0.118739] ACPI: Reserving SLIT table memory at [mem 0x6aff5000-0x6aff506b] [ 0.118740] ACPI: Reserving SRAT table memory at [mem 0x6aff4000-0x6aff4b6f] [ 0.118741] ACPI: Reserving SVOS table memory at [mem 0x6aff3000-0x6aff3031] [ 0.118742] ACPI: Reserving WDDT table memory at [mem 0x6aff2000-0x6aff203f] [ 0.118743] ACPI: Reserving OEM4 table memory at [mem 0x6afc8000-0x6aff1a71] [ 0.118744] ACPI: Reserving OEM1 table memory at [mem 0x6afbd000-0x6afc7bca] [ 0.118745] ACPI: Reserving OEM2 table memory at [mem 0x6afab000-0x6afbc207] [ 0.118746] ACPI: Reserving SSDT table memory at [mem 0x6af9d000-0x6afaa426] [ 0.118747] ACPI: Reserving NITR table memory at [mem 0x6af9c000-0x6af9c070] [ 0.118748] ACPI: Reserving LPIT table memory at [mem 0x6af9a000-0x6af9a093] [ 0.118749] ACPI: Reserving WDAT table memory at [mem 0x6af98000-0x6af98133] [ 0.118750] ACPI: Reserving SSDT table memory at [mem 0x6af94000-0x6af97001] [ 0.118751] ACPI: Reserving DBGP table memory at [mem 0x6af93000-0x6af93033] [ 0.118752] ACPI: Reserving DBG2 table memory at [mem 0x6af92000-0x6af92053] [ 0.118753] ACPI: Reserving BGRT table memory at [mem 0x6af91000-0x6af91037] [ 0.118754] ACPI: Reserving TPM2 table memory at [mem 0x6af90000-0x6af9004b] [ 0.118755] ACPI: Reserving LUFT table memory at [mem 0x6af5b000-0x6af8f9e1] [ 0.118756] ACPI: Reserving HEST table memory at [mem 0x6af5a000-0x6af5a0a7] [ 0.118757] ACPI: Reserving BERT table memory at [mem 0x6af59000-0x6af5902f] [ 0.118758] ACPI: Reserving ERST table memory at [mem 0x6af58000-0x6af5822f] [ 0.118759] ACPI: Reserving EINJ table memory at [mem 0x6af57000-0x6af5714f] [ 0.118760] ACPI: Reserving ASF! table memory at [mem 0x6af56000-0x6af5609f] [ 0.118760] ACPI: Reserving WSMT table memory at [mem 0x6af99000-0x6af99027] [ 0.118762] ACPI: Reserving SSDT table memory at [mem 0x6af9b000-0x6af9bacd] [ 0.118763] ACPI: Reserving FPDT table memory at [mem 0x6af54000-0x6af54043] [ 0.194241] Zone ranges: [ 0.194243] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.194245] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.194247] Normal [mem 0x0000000100000000-0x000000107fffffff] [ 0.194248] Movable zone start for each node [ 0.194249] Early memory node ranges [ 0.194250] node 0: [mem 0x0000000000001000-0x000000000003efff] [ 0.194251] node 0: [mem 0x0000000000040000-0x000000000009ffff] [ 0.194252] node 0: [mem 0x0000000000100000-0x0000000062a8efff] [ 0.194253] node 0: [mem 0x000000006c9a8000-0x000000006e6fffff] [ 0.194254] node 0: [mem 0x0000000100000000-0x000000107fffffff] [ 0.194258] Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff] [ 0.194261] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.194263] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.194283] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.196467] On node 0, zone DMA32: 40729 pages in unavailable ranges [ 0.272303] On node 0, zone Normal: 6400 pages in unavailable ranges [ 0.272414] ACPI: PM-Timer IO Port: 0x1808 [ 0.272422] ACPI: X2APIC_NMI (uid[0xffffffff] high level lint[0x1]) [ 0.272424] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.272453] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.272458] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-31 [ 0.272463] IOAPIC[2]: apic_id 10, version 32, address 0xfec08000, GSI 32-39 [ 0.272467] IOAPIC[3]: apic_id 11, version 32, address 0xfec10000, GSI 40-47 [ 0.272471] IOAPIC[4]: apic_id 12, version 32, address 0xfec18000, GSI 48-55 [ 0.272474] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.272475] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.272480] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.272482] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.272485] TSC deadline timer available [ 0.272486] smpboot: Allowing 12 CPUs, 0 hotplug CPUs [ 0.272510] [mem 0x90000000-0xfcffffff] available for PCI devices [ 0.272513] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.275727] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:12 nr_node_ids:1 [ 0.276015] percpu: Embedded 55 pages/cpu s187744 r8192 d29344 u262144 [ 0.276021] pcpu-alloc: s187744 r8192 d29344 u262144 alloc=1*2097152 [ 0.276023] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- [ 0.276055] Built 1 zonelists, mobility grouping on. Total pages: 16403655 [ 0.276063] Kernel command line: BOOT_IMAGE=/vmlinuz-5.19.0-rc8-test-00003-ge3a8d97e6a35 root=/dev/mapper/budai--vg-root ro consoleblank=600 quiet [ 0.276122] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-5.19.0-rc8-test-00003-ge3a8d97e6a35", will be passed to user space. [ 0.279040] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) [ 0.280503] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.280599] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.280600] Stack Depot early init allocating hash table with memblock_alloc, 8388608 bytes [ 0.674510] Memory: 65128856K/66657812K available (12295K kernel code, 3277K rwdata, 3732K rodata, 1600K init, 14120K bss, 1528696K reserved, 0K cma-reserved) [ 0.674513] ********************************************************** [ 0.674514] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.674514] ** ** [ 0.674515] ** This system shows unhashed kernel memory addresses ** [ 0.674515] ** via the console, logs, and other interfaces. This ** [ 0.674516] ** might reduce the security of your system. ** [ 0.674517] ** ** [ 0.674517] ** If you see this message and you are not debugging ** [ 0.674518] ** the kernel, report this immediately to your system ** [ 0.674518] ** administrator! ** [ 0.674519] ** ** [ 0.674519] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.674520] ********************************************************** [ 0.675102] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 [ 0.675135] Kernel/User page tables isolation: enabled [ 0.675384] ftrace: allocating 35586 entries in 140 pages [ 0.681271] ftrace: allocated 140 pages with 3 groups [ 0.682664] Dynamic Preempt: voluntary [ 0.682867] Running RCU self tests [ 0.682876] rcu: Preemptible hierarchical RCU implementation. [ 0.682876] rcu: RCU lockdep checking is enabled. [ 0.682877] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=12. [ 0.682878] Trampoline variant of Tasks RCU enabled. [ 0.682879] Rude variant of Tasks RCU enabled. [ 0.682880] Tracing variant of Tasks RCU enabled. [ 0.682880] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.682881] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 [ 0.694108] NR_IRQS: 4352, nr_irqs: 1064, preallocated irqs: 16 [ 0.694404] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.694526] random: crng init done [ 0.694636] Console: colour dummy device 80x25 [ 0.694668] printk: console [tty0] enabled [ 0.694671] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.694672] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.694673] ... MAX_LOCK_DEPTH: 48 [ 0.694674] ... MAX_LOCKDEP_KEYS: 8192 [ 0.694675] ... CLASSHASH_SIZE: 4096 [ 0.694676] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.694676] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.694677] ... CHAINHASH_SIZE: 32768 [ 0.694678] memory used by lock dependency info: 6365 kB [ 0.694679] memory used for stack traces: 4224 kB [ 0.694680] per task-struct memory footprint: 1920 bytes [ 0.694693] ACPI: Core revision 20220331 [ 0.696202] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns [ 0.696324] APIC: Switch to symmetric I/O mode setup [ 0.696609] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.696681] Switched APIC routing to physical flat. [ 0.698015] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.716231] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns [ 0.716245] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=14799400) [ 0.716248] pid_max: default: 32768 minimum: 301 [ 0.733242] LSM: Security Framework initializing [ 0.733269] Yama: becoming mindful. [ 0.733430] AppArmor: AppArmor initialized [ 0.733636] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.733720] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.734821] CPU0: Thermal monitoring enabled (TM1) [ 0.734913] process: using mwait in idle threads [ 0.734915] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.734917] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.734925] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.734927] Spectre V2 : Mitigation: IBRS [ 0.734928] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.734929] RETBleed: Mitigation: IBRS [ 0.734931] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.734932] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.734948] MDS: Mitigation: Clear CPU buffers [ 0.734949] TAA: Mitigation: Clear CPU buffers [ 0.734949] MMIO Stale Data: Mitigation: Clear CPU buffers [ 0.747944] debug: unmapping init [mem 0xffffffffbaa2e000-0xffffffffbaa35fff] [ 0.748520] smpboot: CPU0: Intel(R) Xeon(R) W-2135 CPU @ 3.70GHz (family: 0x6, model: 0x55, stepping: 0x4) [ 0.749364] cblist_init_generic: Setting adjustable number of callback queues. [ 0.749380] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.749478] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.749570] cblist_init_generic: Setting shift to 4 and lim to 1. [ 0.749654] Running RCU-tasks wait API self tests [ 0.852469] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. [ 0.852601] ... version: 4 [ 0.852603] ... bit width: 48 [ 0.852605] ... generic registers: 4 [ 0.852606] ... value mask: 0000ffffffffffff [ 0.852608] ... max period: 00007fffffffffff [ 0.852609] ... fixed-purpose events: 3 [ 0.852611] ... event mask: 000000070000000f [ 0.852875] Estimated ratio of average max frequency by base frequency (times 1024): 1217 [ 0.853014] rcu: Hierarchical SRCU implementation. [ 0.853015] rcu: Max phase no-delay instances is 1000. [ 0.855147] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.855959] smp: Bringing up secondary CPUs ... [ 0.856688] x86: Booting SMP configuration: [ 0.856693] .... node #0, CPUs: #1 #2 #3 [ 0.870268] Callback from call_rcu_tasks_trace() invoked. [ 0.870268] #4 #5 #6 [ 0.880500] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.880500] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.880500] MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details. [ 0.880909] #7 #8 #9 #10 #11 [ 0.888406] smp: Brought up 1 node, 12 CPUs [ 0.888406] smpboot: Max logical packages: 1 [ 0.888406] smpboot: Total of 12 processors activated (88796.40 BogoMIPS) [ 0.898028] devtmpfs: initialized [ 0.903767] DMA-API: preallocated 65536 debug entries [ 0.903771] DMA-API: debugging enabled by kernel config [ 0.903774] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.903786] futex hash table entries: 4096 (order: 7, 524288 bytes, linear) [ 0.904810] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.905930] audit: initializing netlink subsys (disabled) [ 0.905975] audit: type=2000 audit(1658734470.212:1): state=initialized audit_enabled=0 res=1 [ 0.905975] thermal_sys: Registered thermal governor 'fair_share' [ 0.905975] thermal_sys: Registered thermal governor 'step_wise' [ 0.905975] thermal_sys: Registered thermal governor 'user_space' [ 0.905975] thermal_sys: Registered thermal governor 'power_allocator' [ 0.905975] cpuidle: using governor menu [ 0.905975] Detected 1 PCC Subspaces [ 0.905975] Registering PCC driver as Mailbox controller [ 0.905975] HugeTLB: can optimize 4095 vmemmap pages for hugepages-1048576kB [ 0.905975] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.905975] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.905975] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.905975] pmd_set_huge: Cannot satisfy [mem 0x80000000-0x80200000] with a huge-page mapping due to MTRR override. [ 0.905975] PCI: Using configuration type 1 for base access [ 0.909880] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.927108] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.927129] HugeTLB: can optimize 7 vmemmap pages for hugepages-2048kB [ 0.927129] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.927129] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.928547] cryptd: max_cpu_qlen set to 1000 [ 0.928740] ACPI: Added _OSI(Module Device) [ 0.928743] ACPI: Added _OSI(Processor Device) [ 0.928746] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.928748] ACPI: Added _OSI(Processor Aggregator Device) [ 0.928758] ACPI: Added _OSI(Linux-Dell-Video) [ 0.928766] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.928774] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.956903] Callback from call_rcu_tasks_rude() invoked. [ 1.639894] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 1.794837] ACPI: Dynamic OEM Table Load: [ 1.951626] ACPI: Dynamic OEM Table Load: [ 2.126419] ACPI: Dynamic OEM Table Load: [ 3.004573] ACPI: Interpreter enabled [ 3.004632] ACPI: PM: (supports S0 S5) [ 3.004641] ACPI: Using IOAPIC for interrupt routing [ 3.005237] HEST: Table parsing has been initialized. [ 3.007163] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 3.007167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 3.007169] PCI: Using E820 reservations for host bridge windows [ 3.069726] ACPI: Enabled 8 GPEs in block 00 to 7F [ 3.570026] ACPI: PCI Root Bridge [PC00] (domain 0000 [bus 00-15]) [ 3.570053] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.571652] acpi PNP0A08:00: _OSC: platform does not support [AER LTR] [ 3.574618] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 3.574621] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.578025] acpi PNP0A08:00: host bridge window expanded to [mem 0xfd000000-0xfe7fffff window]; [mem 0xfd000000-0xfe7fffff window] ignored [ 3.580936] PCI host bridge to bus 0000:00 [ 3.580942] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 3.580949] pci_bus 0000:00: root bus resource [io 0x1000-0x3fff window] [ 3.580954] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] [ 3.580960] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] [ 3.580965] pci_bus 0000:00: root bus resource [mem 0x90000000-0xa33fffff window] [ 3.580971] pci_bus 0000:00: root bus resource [mem 0x40000000000-0x43fffffffff window] [ 3.580977] pci_bus 0000:00: root bus resource [bus 00-15] [ 3.581138] pci 0000:00:00.0: [8086:2020] type 00 class 0x060000 [ 3.581983] pci 0000:00:04.0: [8086:2021] type 00 class 0x088000 [ 3.582004] pci 0000:00:04.0: reg 0x10: [mem 0x43ffff2c000-0x43ffff2ffff 64bit] [ 3.582666] pci 0000:00:04.1: [8086:2021] type 00 class 0x088000 [ 3.582686] pci 0000:00:04.1: reg 0x10: [mem 0x43ffff28000-0x43ffff2bfff 64bit] [ 3.583378] pci 0000:00:04.2: [8086:2021] type 00 class 0x088000 [ 3.583398] pci 0000:00:04.2: reg 0x10: [mem 0x43ffff24000-0x43ffff27fff 64bit] [ 3.584070] pci 0000:00:04.3: [8086:2021] type 00 class 0x088000 [ 3.584090] pci 0000:00:04.3: reg 0x10: [mem 0x43ffff20000-0x43ffff23fff 64bit] [ 3.584745] pci 0000:00:04.4: [8086:2021] type 00 class 0x088000 [ 3.584765] pci 0000:00:04.4: reg 0x10: [mem 0x43ffff1c000-0x43ffff1ffff 64bit] [ 3.585443] pci 0000:00:04.5: [8086:2021] type 00 class 0x088000 [ 3.585463] pci 0000:00:04.5: reg 0x10: [mem 0x43ffff18000-0x43ffff1bfff 64bit] [ 3.586126] pci 0000:00:04.6: [8086:2021] type 00 class 0x088000 [ 3.586146] pci 0000:00:04.6: reg 0x10: [mem 0x43ffff14000-0x43ffff17fff 64bit] [ 3.586813] pci 0000:00:04.7: [8086:2021] type 00 class 0x088000 [ 3.586833] pci 0000:00:04.7: reg 0x10: [mem 0x43ffff10000-0x43ffff13fff 64bit] [ 3.587498] pci 0000:00:05.0: [8086:2024] type 00 class 0x088000 [ 3.588170] pci 0000:00:05.2: [8086:2025] type 00 class 0x088000 [ 3.588519] pci 0000:00:05.4: [8086:2026] type 00 class 0x080020 [ 3.588537] pci 0000:00:05.4: reg 0x10: [mem 0xa3324000-0xa3324fff] [ 3.588906] pci 0000:00:08.0: [8086:2014] type 00 class 0x088000 [ 3.589557] pci 0000:00:08.1: [8086:2015] type 00 class 0x110100 [ 3.589856] pci 0000:00:08.2: [8086:2016] type 00 class 0x088000 [ 3.590221] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 [ 3.590252] pci 0000:00:14.0: reg 0x10: [mem 0x43ffff00000-0x43ffff0ffff 64bit] [ 3.590378] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 3.593485] pci 0000:00:14.2: [8086:a2b1] type 00 class 0x118000 [ 3.593516] pci 0000:00:14.2: reg 0x10: [mem 0x43ffff33000-0x43ffff33fff 64bit] [ 3.594219] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 [ 3.594250] pci 0000:00:16.0: reg 0x10: [mem 0x43ffff32000-0x43ffff32fff 64bit] [ 3.594370] pci 0000:00:16.0: PME# supported from D3hot [ 3.594977] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 [ 3.595111] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 3.601892] pci 0000:00:1d.2: [8086:a29a] type 01 class 0x060400 [ 3.602032] pci 0000:00:1d.2: PME# supported from D0 D3hot D3cold [ 3.608943] pci 0000:00:1e.0: [8086:a2a7] type 00 class 0x118000 [ 3.609152] pci 0000:00:1e.0: reg 0x10: [mem 0x43ffff31000-0x43ffff31fff 64bit] [ 3.612199] pci 0000:00:1f.0: [8086:a2d3] type 00 class 0x060100 [ 3.614707] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 [ 3.614727] pci 0000:00:1f.2: reg 0x10: [mem 0xa3320000-0xa3323fff] [ 3.617240] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 [ 3.617299] pci 0000:00:1f.4: reg 0x10: [mem 0x43ffff30000-0x43ffff300ff 64bit] [ 3.617372] pci 0000:00:1f.4: reg 0x20: [io 0x3000-0x301f] [ 3.618036] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000 [ 3.618066] pci 0000:00:1f.6: reg 0x10: [mem 0xa3300000-0xa331ffff] [ 3.618244] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 3.620825] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 3.621099] pci 0000:02:00.0: [12d8:e113] type 01 class 0x060400 [ 3.621183] pci 0000:02:00.0: enabling Extended Tags [ 3.621331] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 3.622040] pci 0000:00:1d.2: PCI bridge to [bus 02-03] [ 3.622099] pci_bus 0000:03: extended config space not accessible [ 3.622285] pci 0000:02:00.0: PCI bridge to [bus 03] [ 3.622330] pci_bus 0000:00: on NUMA node 0 [ 3.634450] ACPI: PCI Root Bridge [PC01] (domain 0000 [bus 16-63]) [ 3.634468] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.636259] acpi PNP0A08:01: _OSC: platform does not support [AER LTR] [ 3.639640] acpi PNP0A08:01: _OSC: OS now controls [PME PCIeCapability] [ 3.639642] acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.644870] PCI host bridge to bus 0000:16 [ 3.644877] pci_bus 0000:16: root bus resource [io 0x4000-0x7fff window] [ 3.644883] pci_bus 0000:16: root bus resource [mem 0xa3400000-0xbe3fffff window] [ 3.644888] pci_bus 0000:16: root bus resource [mem 0x44000000000-0x47fffffffff window] [ 3.644891] pci_bus 0000:16: root bus resource [bus 16-63] [ 3.644989] pci 0000:16:02.0: [8086:2032] type 01 class 0x060400 [ 3.645038] pci 0000:16:02.0: enabling Extended Tags [ 3.645125] pci 0000:16:02.0: PME# supported from D0 D3hot D3cold [ 3.645784] pci 0000:16:05.0: [8086:2034] type 00 class 0x088000 [ 3.646136] pci 0000:16:05.2: [8086:2035] type 00 class 0x088000 [ 3.646482] pci 0000:16:05.4: [8086:2036] type 00 class 0x080020 [ 3.646500] pci 0000:16:05.4: reg 0x10: [mem 0xbe300000-0xbe300fff] [ 3.646861] pci 0000:16:08.0: [8086:208d] type 00 class 0x088000 [ 3.647468] pci 0000:16:08.1: [8086:208d] type 00 class 0x088000 [ 3.647758] pci 0000:16:08.2: [8086:208d] type 00 class 0x088000 [ 3.648046] pci 0000:16:08.3: [8086:208d] type 00 class 0x088000 [ 3.648336] pci 0000:16:08.4: [8086:208d] type 00 class 0x088000 [ 3.648624] pci 0000:16:08.5: [8086:208d] type 00 class 0x088000 [ 3.648915] pci 0000:16:08.6: [8086:208d] type 00 class 0x088000 [ 3.649203] pci 0000:16:08.7: [8086:208d] type 00 class 0x088000 [ 3.649504] pci 0000:16:09.0: [8086:208d] type 00 class 0x088000 [ 3.650109] pci 0000:16:09.1: [8086:208d] type 00 class 0x088000 [ 3.650410] pci 0000:16:0e.0: [8086:208e] type 00 class 0x088000 [ 3.651007] pci 0000:16:0e.1: [8086:208e] type 00 class 0x088000 [ 3.651299] pci 0000:16:0e.2: [8086:208e] type 00 class 0x088000 [ 3.651582] pci 0000:16:0e.3: [8086:208e] type 00 class 0x088000 [ 3.651872] pci 0000:16:0e.4: [8086:208e] type 00 class 0x088000 [ 3.652159] pci 0000:16:0e.5: [8086:208e] type 00 class 0x088000 [ 3.652451] pci 0000:16:0e.6: [8086:208e] type 00 class 0x088000 [ 3.652737] pci 0000:16:0e.7: [8086:208e] type 00 class 0x088000 [ 3.653026] pci 0000:16:0f.0: [8086:208e] type 00 class 0x088000 [ 3.653638] pci 0000:16:0f.1: [8086:208e] type 00 class 0x088000 [ 3.653946] pci 0000:16:1d.0: [8086:2054] type 00 class 0x088000 [ 3.654546] pci 0000:16:1d.1: [8086:2055] type 00 class 0x088000 [ 3.654835] pci 0000:16:1d.2: [8086:2056] type 00 class 0x088000 [ 3.655122] pci 0000:16:1d.3: [8086:2057] type 00 class 0x088000 [ 3.655413] pci 0000:16:1e.0: [8086:2080] type 00 class 0x088000 [ 3.656023] pci 0000:16:1e.1: [8086:2081] type 00 class 0x088000 [ 3.656314] pci 0000:16:1e.2: [8086:2082] type 00 class 0x088000 [ 3.656604] pci 0000:16:1e.3: [8086:2083] type 00 class 0x088000 [ 3.656897] pci 0000:16:1e.4: [8086:2084] type 00 class 0x088000 [ 3.657186] pci 0000:16:1e.5: [8086:2085] type 00 class 0x088000 [ 3.657478] pci 0000:16:1e.6: [8086:2086] type 00 class 0x088000 [ 3.658060] pci 0000:17:00.0: [144d:a808] type 00 class 0x010802 [ 3.658089] pci 0000:17:00.0: reg 0x10: [mem 0xbe200000-0xbe203fff 64bit] [ 3.658949] pci 0000:16:02.0: PCI bridge to [bus 17] [ 3.658954] pci 0000:16:02.0: bridge window [mem 0xbe200000-0xbe2fffff] [ 3.658971] pci_bus 0000:16: on NUMA node 0 [ 3.660567] ACPI: PCI Root Bridge [PC02] (domain 0000 [bus 64-b1]) [ 3.660584] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.662395] acpi PNP0A08:02: _OSC: platform does not support [AER LTR] [ 3.665795] acpi PNP0A08:02: _OSC: OS now controls [PME PCIeCapability] [ 3.665798] acpi PNP0A08:02: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.670594] PCI host bridge to bus 0000:64 [ 3.670600] pci_bus 0000:64: root bus resource [mem 0x000a0000-0x000bffff window] [ 3.670606] pci_bus 0000:64: root bus resource [io 0x8000-0xbfff window] [ 3.670611] pci_bus 0000:64: root bus resource [io 0x03b0-0x03bb window] [ 3.670617] pci_bus 0000:64: root bus resource [io 0x03c0-0x03df window] [ 3.670625] pci_bus 0000:64: root bus resource [mem 0xbe400000-0xe0ffffff window] [ 3.670631] pci_bus 0000:64: root bus resource [mem 0x48000000000-0x4bfffffffff window] [ 3.670634] pci_bus 0000:64: root bus resource [bus 64-b1] [ 3.670724] pci 0000:64:00.0: [8086:2030] type 01 class 0x060400 [ 3.670852] pci 0000:64:00.0: PME# supported from D0 D3hot D3cold [ 3.671509] pci 0000:64:05.0: [8086:2034] type 00 class 0x088000 [ 3.671859] pci 0000:64:05.2: [8086:2035] type 00 class 0x088000 [ 3.672203] pci 0000:64:05.4: [8086:2036] type 00 class 0x080020 [ 3.672221] pci 0000:64:05.4: reg 0x10: [mem 0xe0100000-0xe0100fff] [ 3.672586] pci 0000:64:08.0: [8086:2066] type 00 class 0x088000 [ 3.673250] pci 0000:64:09.0: [8086:2066] type 00 class 0x088000 [ 3.673907] pci 0000:64:0a.0: [8086:2040] type 00 class 0x088000 [ 3.674560] pci 0000:64:0a.1: [8086:2041] type 00 class 0x088000 [ 3.674898] pci 0000:64:0a.2: [8086:2042] type 00 class 0x088000 [ 3.675227] pci 0000:64:0a.3: [8086:2043] type 00 class 0x088000 [ 3.675561] pci 0000:64:0a.4: [8086:2044] type 00 class 0x088000 [ 3.675899] pci 0000:64:0a.5: [8086:2045] type 00 class 0x088000 [ 3.676231] pci 0000:64:0a.6: [8086:2046] type 00 class 0x088000 [ 3.676562] pci 0000:64:0a.7: [8086:2047] type 00 class 0x088000 [ 3.676894] pci 0000:64:0b.0: [8086:2048] type 00 class 0x088000 [ 3.677548] pci 0000:64:0b.1: [8086:2049] type 00 class 0x088000 [ 3.677889] pci 0000:64:0b.2: [8086:204a] type 00 class 0x088000 [ 3.678218] pci 0000:64:0b.3: [8086:204b] type 00 class 0x088000 [ 3.678557] pci 0000:64:0c.0: [8086:2040] type 00 class 0x088000 [ 3.679201] pci 0000:64:0c.1: [8086:2041] type 00 class 0x088000 [ 3.679537] pci 0000:64:0c.2: [8086:2042] type 00 class 0x088000 [ 3.679874] pci 0000:64:0c.3: [8086:2043] type 00 class 0x088000 [ 3.680207] pci 0000:64:0c.4: [8086:2044] type 00 class 0x088000 [ 3.680539] pci 0000:64:0c.5: [8086:2045] type 00 class 0x088000 [ 3.680874] pci 0000:64:0c.6: [8086:2046] type 00 class 0x088000 [ 3.681215] pci 0000:64:0c.7: [8086:2047] type 00 class 0x088000 [ 3.681555] pci 0000:64:0d.0: [8086:2048] type 00 class 0x088000 [ 3.682197] pci 0000:64:0d.1: [8086:2049] type 00 class 0x088000 [ 3.682536] pci 0000:64:0d.2: [8086:204a] type 00 class 0x088000 [ 3.682866] pci 0000:64:0d.3: [8086:204b] type 00 class 0x088000 [ 3.683510] pci 0000:65:00.0: [10de:1cb1] type 00 class 0x030000 [ 3.683533] pci 0000:65:00.0: reg 0x10: [mem 0xdf000000-0xdfffffff] [ 3.683553] pci 0000:65:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 3.683573] pci 0000:65:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 3.683587] pci 0000:65:00.0: reg 0x24: [io 0xb000-0xb07f] [ 3.683601] pci 0000:65:00.0: reg 0x30: [mem 0xe0000000-0xe007ffff pref] [ 3.683689] pci 0000:65:00.0: BAR 1: assigned to efifb [ 3.683812] pci 0000:65:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x16 link at 0000:64:00.0 (capable of 126.016 Gb/s with 8.0 GT/s PCIe x16 link) [ 3.684420] pci 0000:65:00.1: [10de:0fb9] type 00 class 0x040300 [ 3.684439] pci 0000:65:00.1: reg 0x10: [mem 0xe0080000-0xe0083fff] [ 3.684914] pci 0000:64:00.0: PCI bridge to [bus 65] [ 3.684918] pci 0000:64:00.0: bridge window [io 0xb000-0xbfff] [ 3.684922] pci 0000:64:00.0: bridge window [mem 0xdf000000-0xe00fffff] [ 3.684926] pci 0000:64:00.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 3.684940] pci_bus 0000:64: on NUMA node 0 [ 3.686316] ACPI: PCI Root Bridge [PC03] (domain 0000 [bus b2-ff]) [ 3.686332] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 3.688137] acpi PNP0A08:03: _OSC: platform does not support [AER LTR] [ 3.691526] acpi PNP0A08:03: _OSC: OS now controls [PME PCIeCapability] [ 3.691528] acpi PNP0A08:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 3.696303] PCI host bridge to bus 0000:b2 [ 3.696310] pci_bus 0000:b2: root bus resource [io 0xc000-0xffff window] [ 3.696316] pci_bus 0000:b2: root bus resource [mem 0xe1000000-0xfbffffff window] [ 3.696321] pci_bus 0000:b2: root bus resource [mem 0x4c000000000-0x4ffffffffff window] [ 3.696324] pci_bus 0000:b2: root bus resource [bus b2-ff] [ 3.696416] pci 0000:b2:00.0: [8086:2030] type 01 class 0x060400 [ 3.696467] pci 0000:b2:00.0: enabling Extended Tags [ 3.696552] pci 0000:b2:00.0: PME# supported from D0 D3hot D3cold [ 3.697209] pci 0000:b2:05.0: [8086:2034] type 00 class 0x088000 [ 3.697564] pci 0000:b2:05.2: [8086:2035] type 00 class 0x088000 [ 3.697907] pci 0000:b2:05.4: [8086:2036] type 00 class 0x080020 [ 3.697925] pci 0000:b2:05.4: reg 0x10: [mem 0xfbf00000-0xfbf00fff] [ 3.698300] pci 0000:b2:12.0: [8086:204c] type 00 class 0x110100 [ 3.698940] pci 0000:b2:12.1: [8086:204d] type 00 class 0x110100 [ 3.699233] pci 0000:b2:12.2: [8086:204e] type 00 class 0x088000 [ 3.699528] pci 0000:b2:15.0: [8086:2018] type 00 class 0x088000 [ 3.700142] pci 0000:b2:16.0: [8086:2018] type 00 class 0x088000 [ 3.700749] pci 0000:b2:16.4: [8086:2018] type 00 class 0x088000 [ 3.701314] pci 0000:b2:00.0: PCI bridge to [bus b3] [ 3.701333] pci_bus 0000:b2: on NUMA node 0 [ 3.703967] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 3.704806] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 3.705619] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 3.706427] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 3.707234] ACPI: PCI: Interrupt link LNKE configured for IRQ 11 [ 3.708040] ACPI: PCI: Interrupt link LNKF configured for IRQ 11 [ 3.708849] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 3.709659] ACPI: PCI: Interrupt link LNKH configured for IRQ 15 [ 3.712367] iommu: Default domain type: Translated [ 3.712369] iommu: DMA domain TLB invalidation policy: lazy mode [ 3.713049] SCSI subsystem initialized [ 3.713147] libata version 3.00 loaded. [ 3.713346] ACPI: bus type USB registered [ 3.713526] usbcore: registered new interface driver usbfs [ 3.713614] usbcore: registered new interface driver hub [ 3.713681] usbcore: registered new device driver usb [ 3.713821] EDAC MC: Ver: 3.0.0 [ 3.716473] Registered efivars operations [ 3.716473] PCI: Using ACPI for IRQ routing [ 3.722717] PCI: pci_cache_line_size set to 64 bytes [ 3.722899] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff] [ 3.722914] e820: reserve RAM buffer [mem 0x604e0000-0x63ffffff] [ 3.722920] e820: reserve RAM buffer [mem 0x62a8f000-0x63ffffff] [ 3.722926] e820: reserve RAM buffer [mem 0x6e700000-0x6fffffff] [ 3.725276] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 3.725291] hpet0: 8 comparators, 64-bit 24.000000 MHz counter [ 3.729573] clocksource: Switched to clocksource tsc-early [ 3.730662] VFS: Disk quotas dquot_6.6.0 [ 3.730718] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 3.732169] AppArmor: AppArmor Filesystem Enabled [ 3.732169] pnp: PnP ACPI init [ 3.783368] system 00:01: [io 0x0500-0x05fe] has been reserved [ 3.783387] system 00:01: [io 0x0400-0x047f] could not be reserved [ 3.783397] system 00:01: [io 0x0600-0x061f] has been reserved [ 3.783406] system 00:01: [io 0x0ca0-0x0ca5] has been reserved [ 3.783415] system 00:01: [io 0x0880-0x0883] has been reserved [ 3.783423] system 00:01: [io 0x0800-0x081f] has been reserved [ 3.783440] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 3.783466] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 3.783476] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 3.783490] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved [ 3.783500] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 3.783510] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 3.783519] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 3.785913] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 3.785927] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 3.785936] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 3.789763] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 3.790576] system 00:04: [mem 0xfd000000-0xfdabffff] has been reserved [ 3.790587] system 00:04: [mem 0xfdad0000-0xfdadffff] has been reserved [ 3.790601] system 00:04: [mem 0xfdb00000-0xfdffffff] could not be reserved [ 3.790611] system 00:04: [mem 0xfe000000-0xfe00ffff] has been reserved [ 3.790621] system 00:04: [mem 0xfe011000-0xfe01ffff] has been reserved [ 3.790630] system 00:04: [mem 0xfe036000-0xfe03bfff] has been reserved [ 3.790640] system 00:04: [mem 0xfe03d000-0xfe3fffff] has been reserved [ 3.790650] system 00:04: [mem 0xfe410000-0xfe7fffff] has been reserved [ 3.792356] system 00:05: [io 0x0f00-0x0ffe] has been reserved [ 3.792359] Callback from call_rcu_tasks() invoked. [ 3.804833] system 00:06: [mem 0xfdaf0000-0xfdafffff] has been reserved [ 3.804845] system 00:06: [mem 0xfdae0000-0xfdaeffff] has been reserved [ 3.804855] system 00:06: [mem 0xfdac0000-0xfdacffff] has been reserved [ 3.815354] pnp: PnP ACPI: found 7 devices [ 3.831021] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 3.831205] NET: Registered PF_INET protocol family [ 3.831487] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 3.834382] tcp_listen_portaddr_hash hash table entries: 32768 (order: 9, 2359296 bytes, linear) [ 3.835017] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.835141] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 3.835545] TCP bind hash table entries: 65536 (order: 10, 4718592 bytes, vmalloc hugepage) [ 3.836824] TCP: Hash tables configured (established 524288 bind 65536) [ 3.837174] UDP hash table entries: 32768 (order: 10, 5242880 bytes, vmalloc hugepage) [ 3.838508] UDP-Lite hash table entries: 32768 (order: 10, 5242880 bytes, vmalloc hugepage) [ 3.840096] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.840147] pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 3.840155] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 3.840162] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 3.840189] clipped [mem size 0x00004000] to [mem size 0xfffffffffffc8000] for e820 entry [mem 0x000a0000-0x000fffff] [ 3.840201] pci 0000:00:1d.0: BAR 14: assigned [mem 0x90000000-0x901fffff] [ 3.840205] clipped [mem size 0x00000000 64bit pref] to [mem size 0xfffffffffffc4000 64bit pref] for e820 entry [mem 0x000a0000-0x000fffff] [ 3.840210] pci 0000:00:1d.0: BAR 15: assigned [mem 0x40000000000-0x400001fffff 64bit pref] [ 3.840216] pci 0000:00:1d.0: BAR 13: assigned [io 0x1000-0x1fff] [ 3.840248] pci 0000:00:1d.0: PCI bridge to [bus 01] [ 3.840251] pci 0000:00:1d.0: bridge window [io 0x1000-0x1fff] [ 3.840259] pci 0000:00:1d.0: bridge window [mem 0x90000000-0x901fffff] [ 3.840265] pci 0000:00:1d.0: bridge window [mem 0x40000000000-0x400001fffff 64bit pref] [ 3.840276] pci 0000:02:00.0: PCI bridge to [bus 03] [ 3.840302] pci 0000:00:1d.2: PCI bridge to [bus 02-03] [ 3.840323] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 3.840325] pci_bus 0000:00: resource 5 [io 0x1000-0x3fff window] [ 3.840327] pci_bus 0000:00: resource 6 [mem 0x000c4000-0x000c7fff window] [ 3.840329] pci_bus 0000:00: resource 7 [mem 0xfd000000-0xfe7fffff window] [ 3.840331] pci_bus 0000:00: resource 8 [mem 0x90000000-0xa33fffff window] [ 3.840333] pci_bus 0000:00: resource 9 [mem 0x40000000000-0x43fffffffff window] [ 3.840335] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 3.840337] pci_bus 0000:01: resource 1 [mem 0x90000000-0x901fffff] [ 3.840339] pci_bus 0000:01: resource 2 [mem 0x40000000000-0x400001fffff 64bit pref] [ 3.841375] pci 0000:16:02.0: PCI bridge to [bus 17] [ 3.841383] pci 0000:16:02.0: bridge window [mem 0xbe200000-0xbe2fffff] [ 3.841398] pci_bus 0000:16: resource 4 [io 0x4000-0x7fff window] [ 3.841400] pci_bus 0000:16: resource 5 [mem 0xa3400000-0xbe3fffff window] [ 3.841402] pci_bus 0000:16: resource 6 [mem 0x44000000000-0x47fffffffff window] [ 3.841404] pci_bus 0000:17: resource 1 [mem 0xbe200000-0xbe2fffff] [ 3.841655] pci 0000:64:00.0: PCI bridge to [bus 65] [ 3.841658] pci 0000:64:00.0: bridge window [io 0xb000-0xbfff] [ 3.841665] pci 0000:64:00.0: bridge window [mem 0xdf000000-0xe00fffff] [ 3.841671] pci 0000:64:00.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref] [ 3.841682] pci_bus 0000:64: resource 4 [mem 0x000a0000-0x000bffff window] [ 3.841684] pci_bus 0000:64: resource 5 [io 0x8000-0xbfff window] [ 3.841686] pci_bus 0000:64: resource 6 [io 0x03b0-0x03bb window] [ 3.841688] pci_bus 0000:64: resource 7 [io 0x03c0-0x03df window] [ 3.841690] pci_bus 0000:64: resource 8 [mem 0xbe400000-0xe0ffffff window] [ 3.841692] pci_bus 0000:64: resource 9 [mem 0x48000000000-0x4bfffffffff window] [ 3.841694] pci_bus 0000:65: resource 0 [io 0xb000-0xbfff] [ 3.841696] pci_bus 0000:65: resource 1 [mem 0xdf000000-0xe00fffff] [ 3.841698] pci_bus 0000:65: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref] [ 3.841880] pci 0000:b2:00.0: PCI bridge to [bus b3] [ 3.841899] pci_bus 0000:b2: resource 4 [io 0xc000-0xffff window] [ 3.841901] pci_bus 0000:b2: resource 5 [mem 0xe1000000-0xfbffffff window] [ 3.841903] pci_bus 0000:b2: resource 6 [mem 0x4c000000000-0x4ffffffffff window] [ 3.845645] pci 0000:16:05.0: disabled boot interrupts on device [8086:2034] [ 3.845709] pci 0000:17:00.0: CLS mismatch (64 != 32), using 64 bytes [ 3.845715] pci 0000:64:05.0: disabled boot interrupts on device [8086:2034] [ 3.846039] pci 0000:65:00.1: D0 power state depends on 0000:65:00.0 [ 3.846068] pci 0000:b2:05.0: disabled boot interrupts on device [8086:2034] [ 3.846219] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 3.846221] software IO TLB: mapped [mem 0x000000005904d000-0x000000005d04d000] (64MB) [ 3.846703] Unpacking initramfs... [ 3.864401] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 3.864405] RAPL PMU: hw unit of domain package 2^-14 Joules [ 3.864407] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 3.876379] workingset: timestamp_bits=46 max_order=24 bucket_order=0 [ 3.908228] NET: Registered PF_ALG protocol family [ 3.908349] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 3.908558] io scheduler mq-deadline registered [ 3.908917] cryptomgr_test (104) used greatest stack depth: 14576 bytes left [ 3.912953] pcieport 0000:00:1d.0: PME: Signaling with IRQ 24 [ 3.915186] pcieport 0000:00:1d.2: PME: Signaling with IRQ 25 [ 3.917945] pcieport 0000:16:02.0: PME: Signaling with IRQ 27 [ 3.919998] pcieport 0000:64:00.0: PME: Signaling with IRQ 29 [ 3.921814] pcieport 0000:b2:00.0: PME: Signaling with IRQ 31 [ 3.923560] Monitor-Mwait will be used to enter C-1 state [ 3.923585] Monitor-Mwait will be used to enter C-2 state [ 3.923599] ACPI: \_SB_.SCK0.CP00: Found 2 idle states [ 3.928506] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 3.928555] ACPI: button: Sleep Button [SLPB] [ 3.928964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 3.928974] ACPI: button: Power Button [PWRF] [ 3.944003] ERST: Error Record Serialization Table (ERST) support is initialized. [ 3.944059] pstore: Registered erst as persistent store backend [ 3.946100] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 3.948521] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 3.956270] nvme nvme0: pci function 0000:17:00.0 [ 3.958564] e1000e: Intel(R) PRO/1000 Network Driver [ 3.958566] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.960404] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.965082] nvme nvme0: Shutdown timeout set to 8 seconds [ 3.972253] ------------[ cut here ]------------ [ 3.972255] ============================= [ 3.972255] WARNING: suspicious RCU usage [ 3.972256] 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 Not tainted [ 3.972257] ----------------------------- [ 3.972257] include/trace/events/lock.h:48 suspicious rcu_dereference_check() usage! [ 3.972258] other info that might help us debug this: [ 3.972258] rcu_scheduler_active = 2, debug_locks = 1 [ 3.972259] RCU used illegally from extended quiescent state! [ 3.972260] no locks held by swapper/0/0. [ 3.972261] stack backtrace: [ 3.972261] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 [ 3.972263] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 3.972264] Call Trace: [ 3.972265] <TASK> [ 3.972267] dump_stack_lvl+0x44/0x5b [ 3.972273] lock_acquire.cold.74+0x1f/0x24 [ 3.972286] _raw_spin_lock_irqsave+0x38/0x60 [ 3.972290] ? down_trylock+0xf/0x40 [ 3.972296] down_trylock+0xf/0x40 [ 3.972298] ? vprintk_emit+0x7b/0x2c0 [ 3.972301] __down_trylock_console_sem+0x23/0x90 [ 3.972304] console_trylock+0x13/0x70 [ 3.972306] vprintk_emit+0x7b/0x2c0 [ 3.972314] _printk+0x58/0x73 [ 3.972324] ? rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972325] report_bug.cold.2+0xc/0x4c [ 3.972331] handle_bug+0x3f/0x70 [ 3.972335] exc_invalid_op+0x13/0x60 [ 3.972339] asm_exc_invalid_op+0x16/0x20 [ 3.972341] RIP: 0010:rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972343] Code: 12 ba 48 8b 83 40 01 00 00 48 85 c0 74 20 48 83 c0 01 48 89 83 40 01 00 00 5b c3 cc cc cc cc 65 8b 05 8c 48 63 46 85 c0 74 c2 <0f> 0b eb be e8 93 ff ff ff 48 83 bb 48 01 00 00 00 8b 83 50 01 00 [ 3.972344] RSP: 0000:ffffffffba203e28 EFLAGS: 00010002 [ 3.972346] RAX: 0000000000000001 RBX: ffffd358bfa07010 RCX: 0000000000000001 [ 3.972347] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 [ 3.972348] RBP: 0000000000000001 R08: ffffffffffc40c55 R09: 000000000002be80 [ 3.972349] R10: 000004b18007d4f2 R11: ffff9f467802b7a4 R12: ffffffffba4a9d80 [ 3.972349] R13: ffffffffba4a9d00 R14: 0000000000000001 R15: 0000000000000000 [ 3.972367] cpuidle_enter_state+0x2f4/0x4b0 [ 3.972375] cpuidle_enter+0x29/0x40 [ 3.972378] do_idle+0x1d8/0x210 [ 3.972385] cpu_startup_entry+0x19/0x20 [ 3.972387] rest_init+0x117/0x1a0 [ 3.972390] arch_call_rest_init+0xa/0x14 [ 3.972394] start_kernel+0x6d8/0x703 [ 3.972402] secondary_startup_64_no_verify+0xce/0xdb [ 3.972421] </TASK> [ 3.972422] ============================= [ 3.972422] WARNING: suspicious RCU usage [ 3.972422] 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 Not tainted [ 3.972423] ----------------------------- [ 3.972423] include/trace/events/lock.h:74 suspicious rcu_dereference_check() usage! [ 3.972424] other info that might help us debug this: [ 3.972424] rcu_scheduler_active = 2, debug_locks = 1 [ 3.972425] RCU used illegally from extended quiescent state! [ 3.972425] 1 lock held by swapper/0/0: [ 3.972426] #0: ffffffffba420cd8 ((console_sem).lock){....}-{2:2}, at: down_trylock+0xf/0x40 [ 3.972430] stack backtrace: [ 3.972431] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 [ 3.972432] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 3.972433] Call Trace: [ 3.972433] <TASK> [ 3.972434] dump_stack_lvl+0x44/0x5b [ 3.972438] lock_release.cold.73+0x1f/0x24 [ 3.972446] _raw_spin_unlock_irqrestore+0x1b/0x60 [ 3.972450] down_trylock+0x25/0x40 [ 3.972453] ? vprintk_emit+0x7b/0x2c0 [ 3.972454] __down_trylock_console_sem+0x23/0x90 [ 3.972457] console_trylock+0x13/0x70 [ 3.972460] vprintk_emit+0x7b/0x2c0 [ 3.972468] _printk+0x58/0x73 [ 3.972478] ? rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972479] report_bug.cold.2+0xc/0x4c [ 3.972485] handle_bug+0x3f/0x70 [ 3.972488] exc_invalid_op+0x13/0x60 [ 3.972492] asm_exc_invalid_op+0x16/0x20 [ 3.972493] RIP: 0010:rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972495] Code: 12 ba 48 8b 83 40 01 00 00 48 85 c0 74 20 48 83 c0 01 48 89 83 40 01 00 00 5b c3 cc cc cc cc 65 8b 05 8c 48 63 46 85 c0 74 c2 <0f> 0b eb be e8 93 ff ff ff 48 83 bb 48 01 00 00 00 8b 83 50 01 00 [ 3.972496] RSP: 0000:ffffffffba203e28 EFLAGS: 00010002 [ 3.972497] RAX: 0000000000000001 RBX: ffffd358bfa07010 RCX: 0000000000000001 [ 3.972498] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 [ 3.972499] RBP: 0000000000000001 R08: ffffffffffc40c55 R09: 000000000002be80 [ 3.972499] R10: 000004b18007d4f2 R11: ffff9f467802b7a4 R12: ffffffffba4a9d80 [ 3.972500] R13: ffffffffba4a9d00 R14: 0000000000000001 R15: 0000000000000000 [ 3.972519] cpuidle_enter_state+0x2f4/0x4b0 [ 3.972526] cpuidle_enter+0x29/0x40 [ 3.972529] do_idle+0x1d8/0x210 [ 3.972536] cpu_startup_entry+0x19/0x20 [ 3.972538] rest_init+0x117/0x1a0 [ 3.972541] arch_call_rest_init+0xa/0x14 [ 3.972542] start_kernel+0x6d8/0x703 [ 3.972551] secondary_startup_64_no_verify+0xce/0xdb [ 3.972569] </TASK> [ 3.972577] WARNING: CPU: 0 PID: 0 at kernel/rcu/tree.c:864 rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972580] Modules linked in: [ 3.972582] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 [ 3.972584] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 3.972585] RIP: 0010:rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972587] Code: 12 ba 48 8b 83 40 01 00 00 48 85 c0 74 20 48 83 c0 01 48 89 83 40 01 00 00 5b c3 cc cc cc cc 65 8b 05 8c 48 63 46 85 c0 74 c2 <0f> 0b eb be e8 93 ff ff ff 48 83 bb 48 01 00 00 00 8b 83 50 01 00 [ 3.972588] RSP: 0000:ffffffffba203e28 EFLAGS: 00010002 [ 3.972591] RAX: 0000000000000001 RBX: ffffd358bfa07010 RCX: 0000000000000001 [ 3.972592] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 [ 3.972593] RBP: 0000000000000001 R08: ffffffffffc40c55 R09: 000000000002be80 [ 3.972595] R10: 000004b18007d4f2 R11: ffff9f467802b7a4 R12: ffffffffba4a9d80 [ 3.972596] R13: ffffffffba4a9d00 R14: 0000000000000001 R15: 0000000000000000 [ 3.972598] FS: 0000000000000000(0000) GS:ffff9f4678000000(0000) knlGS:0000000000000000 [ 3.972599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.972601] CR2: ffff9f46b81ff000 CR3: 0000000c6d212001 CR4: 00000000003706f0 [ 3.972603] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.972604] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.972605] Call Trace: [ 3.972607] <TASK> [ 3.972608] cpuidle_enter_state+0x2f4/0x4b0 [ 3.972616] cpuidle_enter+0x29/0x40 [ 3.972620] do_idle+0x1d8/0x210 [ 3.972627] cpu_startup_entry+0x19/0x20 [ 3.972630] rest_init+0x117/0x1a0 [ 3.972633] arch_call_rest_init+0xa/0x14 [ 3.972635] start_kernel+0x6d8/0x703 [ 3.972644] secondary_startup_64_no_verify+0xce/0xdb [ 3.972662] </TASK> [ 3.972663] irq event stamp: 196057 [ 3.972664] hardirqs last enabled at (196057): [<ffffffffb9a00d06>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 3.972667] hardirqs last disabled at (196055): [<ffffffffb9c003f4>] __do_softirq+0x3f4/0x49c [ 3.972669] softirqs last enabled at (196056): [<ffffffffb9c00332>] __do_softirq+0x332/0x49c [ 3.972671] softirqs last disabled at (196045): [<ffffffffb90cb5df>] irq_exit_rcu+0xaf/0xf0 [ 3.972674] ---[ end trace 0000000000000000 ]--- [ 3.972676] ============================= [ 3.972677] WARNING: suspicious RCU usage [ 3.972678] 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 Not tainted [ 3.972679] ----------------------------- [ 3.972680] include/trace/events/error_report.h:71 suspicious rcu_dereference_check() usage! [ 3.972682] other info that might help us debug this: [ 3.972683] rcu_scheduler_active = 2, debug_locks = 1 [ 3.972684] RCU used illegally from extended quiescent state! [ 3.972685] no locks held by swapper/0/0. [ 3.972686] stack backtrace: [ 3.972687] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 [ 3.972689] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 3.972690] Call Trace: [ 3.972691] <TASK> [ 3.972693] dump_stack_lvl+0x44/0x5b [ 3.972697] __warn.cold.12+0x105/0x107 [ 3.972700] ? rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972705] report_bug+0xc1/0x100 [ 3.972713] handle_bug+0x3f/0x70 [ 3.972716] exc_invalid_op+0x13/0x60 [ 3.972721] asm_exc_invalid_op+0x16/0x20 [ 3.972722] RIP: 0010:rcu_eqs_exit.constprop.87+0x54/0xa0 [ 3.972724] Code: 12 ba 48 8b 83 40 01 00 00 48 85 c0 74 20 48 83 c0 01 48 89 83 40 01 00 00 5b c3 cc cc cc cc 65 8b 05 8c 48 63 46 85 c0 74 c2 <0f> 0b eb be e8 93 ff ff ff 48 83 bb 48 01 00 00 00 8b 83 50 01 00 [ 3.972726] RSP: 0000:ffffffffba203e28 EFLAGS: 00010002 [ 3.972728] RAX: 0000000000000001 RBX: ffffd358bfa07010 RCX: 0000000000000001 [ 3.972730] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001 [ 3.972731] RBP: 0000000000000001 R08: ffffffffffc40c55 R09: 000000000002be80 [ 3.972732] R10: 000004b18007d4f2 R11: ffff9f467802b7a4 R12: ffffffffba4a9d80 [ 3.972734] R13: ffffffffba4a9d00 R14: 0000000000000001 R15: 0000000000000000 [ 3.972752] cpuidle_enter_state+0x2f4/0x4b0 [ 3.972759] cpuidle_enter+0x29/0x40 [ 3.972763] do_idle+0x1d8/0x210 [ 3.972770] cpu_startup_entry+0x19/0x20 [ 3.972773] rest_init+0x117/0x1a0 [ 3.972776] arch_call_rest_init+0xa/0x14 [ 3.972778] start_kernel+0x6d8/0x703 [ 3.972787] secondary_startup_64_no_verify+0xce/0xdb [ 3.972805] </TASK> [ 3.972807] ------------[ cut here ]------------ [ 3.972808] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x2b/0x60 [ 3.972811] Modules linked in: [ 3.972813] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.19.0-rc8-test-00003-ge3a8d97e6a35 #1 [ 3.972815] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 3.972817] RIP: 0010:sched_clock_tick+0x2b/0x60 [ 3.972818] Code: eb 06 5b c3 cc cc cc cc 66 90 8b 05 fb 48 40 01 85 c0 74 18 65 8b 05 ec 10 ef 46 85 c0 75 0d 65 8b 05 35 0e ef 46 85 c0 74 02 <0f> 0b e8 fe cb 8b 00 48 c7 c3 40 d5 02 00 89 c0 48 03 1c c5 c0 98 [ 3.972820] RSP: 0000:ffffffffba203e28 EFLAGS: 00010002 [ 3.972823] RAX: 0000000000000001 RBX: ffffd358bfa07010 RCX: 0000000000000001 [ 3.972824] RDX: 0000000000000000 RSI: ffffffffba08e941 RDI: ffffffffba09b733 [ 3.972825] RBP: 0000000000000001 R08: ffffffffffc40c55 R09: 000000000002be80 [ 3.972827] R10: 000004b18007d4f2 R11: ffff9f467802b7a4 R12: ffffffffba4a9d80 [ 3.972829] R13: ffffffffba4a9d00 R14: 0000000000000001 R15: 0000000000000000 [ 3.972830] FS: 0000000000000000(0000) GS:ffff9f4678000000(0000) knlGS:0000000000000000 [ 3.972832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.972834] CR2: ffff9f46b81ff000 CR3: 0000000c6d212001 CR4: 00000000003706f0 [ 3.972835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.972837] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.972838] Call Trace: [ 3.972839] <TASK> [ 3.972841] cpuidle_enter_state+0xb7/0x4b0 [ 3.972849] cpuidle_enter+0x29/0x40 [ 3.972853] do_idle+0x1d8/0x210 [ 3.972860] cpu_startup_entry+0x19/0x20 [ 3.972862] rest_init+0x117/0x1a0 [ 3.972866] arch_call_rest_init+0xa/0x14 [ 3.972868] start_kernel+0x6d8/0x703 [ 3.972876] secondary_startup_64_no_verify+0xce/0xdb [ 3.972893] </TASK> [ 3.972895] irq event stamp: 196057 [ 3.972896] hardirqs last enabled at (196057): [<ffffffffb9a00d06>] asm_sysvec_apic_timer_interrupt+0x16/0x20 [ 3.972898] hardirqs last disabled at (196055): [<ffffffffb9c003f4>] __do_softirq+0x3f4/0x49c [ 3.972900] softirqs last enabled at (196056): [<ffffffffb9c00332>] __do_softirq+0x332/0x49c [ 3.972903] softirqs last disabled at (196045): [<ffffffffb90cb5df>] irq_exit_rcu+0xaf/0xf0 [ 3.972905] ---[ end trace 0000000000000000 ]--- [ 3.978985] nvme nvme0: 12/0/0 default/read/poll queues [ 3.991754] nvme0n1: p1 p2 p3 [ 4.042581] debug: unmapping init [mem 0xffff9f367629b000-0xffff9f3677144fff] [ 4.104839] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) a4:ae:11:14:fc:bd [ 4.104844] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection [ 4.104949] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF [ 4.105276] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.105278] ehci-pci: EHCI PCI platform driver [ 4.107288] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.107396] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 4.108843] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 4.110564] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 4.110587] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 4.110599] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 4.111029] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.19 [ 4.111035] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.111038] usb usb1: Product: xHCI Host Controller [ 4.111040] usb usb1: Manufacturer: Linux 5.19.0-rc8-test-00003-ge3a8d97e6a35 xhci-hcd [ 4.111042] usb usb1: SerialNumber: 0000:00:14.0 [ 4.112211] hub 1-0:1.0: USB hub found [ 4.112314] hub 1-0:1.0: 16 ports detected [ 4.161426] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.19 [ 4.161430] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.161433] usb usb2: Product: xHCI Host Controller [ 4.161435] usb usb2: Manufacturer: Linux 5.19.0-rc8-test-00003-ge3a8d97e6a35 xhci-hcd [ 4.161437] usb usb2: SerialNumber: 0000:00:14.0 [ 4.162266] hub 2-0:1.0: USB hub found [ 4.162323] hub 2-0:1.0: 10 ports detected [ 4.196355] mousedev: PS/2 mouse device common for all mice [ 4.196802] rtc_cmos 00:00: RTC can wake from S4 [ 4.197938] rtc_cmos 00:00: registered as rtc0 [ 4.198087] rtc_cmos 00:00: setting system clock to 2022-07-25T07:34:33 UTC (1658734473) [ 4.198237] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.200008] i801_smbus 0000:00:1f.4: SPD Write Disable is set [ 4.200105] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt [ 4.241068] i2c i2c-0: 4/8 memory slots populated (from DMI) [ 4.241071] i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD [ 4.245778] device-mapper: ioctl: 4.46.0-ioctl (2022-02-22) initialised: dm-devel@redhat.com [ 4.246751] EDAC MC0: Giving out device to module skx_edac controller Skylake Socket#0 IMC#0: DEV 0000:64:0a.0 (INTERRUPT) [ 4.247229] EDAC MC1: Giving out device to module skx_edac controller Skylake Socket#0 IMC#1: DEV 0000:64:0c.0 (INTERRUPT) [ 4.247235] intel_pstate: Intel P-state driver initializing [ 4.249932] intel_pstate: HWP enabled [ 4.254032] efifb: probing for efifb [ 4.254118] efifb: framebuffer at 0xc0000000, using 9600k, total 9600k [ 4.254121] efifb: mode is 1920x1200x32, linelength=8192, pages=1 [ 4.254123] efifb: scrolling: redraw [ 4.254124] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 4.255002] Console: switching to colour frame buffer device 240x75 [ 4.258668] fb0: EFI VGA frame buffer device [ 4.258716] EFI Variables Facility v0.08 2004-May-17 [ 4.289201] pstore: ignoring unexpected backend 'efi' [ 4.289327] hid: raw HID events driver (C) Jiri Kosina [ 4.289510] usbcore: registered new interface driver usbhid [ 4.289512] usbhid: USB HID core driver [ 4.291432] NET: Registered PF_INET6 protocol family [ 4.294216] Segment Routing with IPv6 [ 4.294266] In-situ OAM (IOAM) with IPv6 [ 4.294333] NET: Registered PF_PACKET protocol family [ 4.304194] microcode: sig=0x50654, pf=0x2, revision=0x2006d05 [ 4.304656] microcode: Microcode Update Driver: v2.2. [ 4.304664] IPI shorthand broadcast: enabled [ 4.304700] AVX2 version of gcm_enc/dec engaged. [ 4.304931] AES CTR mode by8 optimization enabled [ 4.307293] sched_clock: Marking stable (4309428437, -2264104)->(4313172469, -6008136) [ 4.312720] registered taskstats version 1 [ 4.312823] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 4.416262] usb 1-11: new high-speed USB device number 2 using xhci_hcd [ 4.502031] page_owner is disabled [ 4.502486] AppArmor: AppArmor sha1 policy hashing enabled [ 4.517910] debug: unmapping init [mem 0xffffffffba89e000-0xffffffffbaa2dfff] [ 4.536485] Write protecting the kernel read-only data: 18432k [ 4.537232] debug: unmapping init [mem 0xffffffffb9c02000-0xffffffffb9dfffff] [ 4.537413] debug: unmapping init [mem 0xffffffffba1a5000-0xffffffffba1fffff] [ 4.572753] usb 1-11: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3 [ 4.572763] usb 1-11: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.578033] hub 1-11:1.0: USB hub found [ 4.578206] hub 1-11:1.0: 3 ports detected [ 4.708260] usb 1-13: new high-speed USB device number 3 using xhci_hcd [ 4.857347] usb 1-13: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 4.857352] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.857355] usb 1-13: Product: USB2.0-CRW [ 4.857357] usb 1-13: Manufacturer: Generic [ 4.857360] usb 1-13: SerialNumber: 20100201396000000 [ 4.884325] tsc: Refined TSC clocksource calibration: 3695.999 MHz [ 4.884344] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns [ 5.062316] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.062319] x86/mm: Checking user space page tables [ 5.062338] usb 1-11.1: new high-speed USB device number 4 using xhci_hcd [ 5.062370] clocksource: Switched to clocksource tsc [ 5.062512] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 5.062523] Run /init as init process [ 5.062525] with arguments: [ 5.062527] /init [ 5.062528] with environment: [ 5.062530] HOME=/ [ 5.062532] TERM=linux [ 5.062533] BOOT_IMAGE=/vmlinuz-5.19.0-rc8-test-00003-ge3a8d97e6a35 [ 5.068518] mkdir (144) used greatest stack depth: 13688 bytes left [ 5.165152] usb 1-11.1: New USB device found, idVendor=0424, idProduct=2640, bcdDevice= 0.00 [ 5.165164] usb 1-11.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.167990] hub 1-11.1:1.0: USB hub found [ 5.168242] hub 1-11.1:1.0: 3 ports detected [ 5.200272] all_generic_ide (157) used greatest stack depth: 13672 bytes left [ 5.386694] setupcon (161) used greatest stack depth: 13640 bytes left [ 5.424678] systemd-udevd (166) used greatest stack depth: 13536 bytes left [ 5.460544] usb 1-11.1.1: new high-speed USB device number 5 using xhci_hcd [ 5.505409] udevadm (168) used greatest stack depth: 13384 bytes left [ 5.615936] usb 1-11.1.1: New USB device found, idVendor=0424, idProduct=4060, bcdDevice= 1.82 [ 5.615950] usb 1-11.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.615958] usb 1-11.1.1: Product: Ultra Fast Media Reader [ 5.615965] usb 1-11.1.1: Manufacturer: Generic [ 5.615972] usb 1-11.1.1: SerialNumber: 000000264001 [ 5.633841] usb-storage 1-11.1.1:1.0: USB Mass Storage device detected [ 5.635351] scsi host0: usb-storage 1-11.1.1:1.0 [ 5.637795] usbcore: registered new interface driver usb-storage [ 5.641102] usbcore: registered new interface driver uas [ 5.700534] usb 1-11.1.2: new low-speed USB device number 6 using xhci_hcd [ 5.809537] usb 1-11.1.2: New USB device found, idVendor=17ef, idProduct=6099, bcdDevice= 1.14 [ 5.809550] usb 1-11.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.809558] usb 1-11.1.2: Product: Lenovo Traditional USB Keyboard [ 5.809565] usb 1-11.1.2: Manufacturer: LiteOn [ 5.825535] input: LiteOn Lenovo Traditional USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1.2/1-11.1.2:1.0/0003:17EF:6099.0001/input/input2 [ 5.891349] hid-generic 0003:17EF:6099.0001: input,hidraw0: USB HID v1.11 Keyboard [LiteOn Lenovo Traditional USB Keyboard] on usb-0000:00:14.0-11.1.2/input0 [ 5.900145] input: LiteOn Lenovo Traditional USB Keyboard System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1.2/1-11.1.2:1.1/0003:17EF:6099.0002/input/input3 [ 5.959333] input: LiteOn Lenovo Traditional USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11.1/1-11.1.2/1-11.1.2:1.1/0003:17EF:6099.0002/input/input4 [ 5.961410] hid-generic 0003:17EF:6099.0002: input,hidraw1: USB HID v1.11 Device [LiteOn Lenovo Traditional USB Keyboard] on usb-0000:00:14.0-11.1.2/input1 [ 6.001527] e1000e 0000:00:1f.6 eno1: renamed from eth0 [ 6.052630] udev (165) used greatest stack depth: 13288 bytes left [ 6.155901] process '/usr/bin/ipconfig' started with executable stack [ 6.292529] lvm (220) used greatest stack depth: 13176 bytes left [ 6.653179] scsi 0:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0 [ 6.666794] sd 0:0:0:0: [sda] Media removed, stopped polling [ 6.676026] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.499125] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 9.499487] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 10.751097] readlink (290) used greatest stack depth: 12984 bytes left [ 10.828828] systemd-udevd (179) used greatest stack depth: 12408 bytes left [ 17.791051] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none. [ 18.054819] e1000e 0000:00:1f.6 eno1: NIC Link is Down [ 18.713278] modprobe (841) used greatest stack depth: 12152 bytes left [ 18.729375] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 18.731182] systemd[1]: Detected architecture x86-64. [ 18.766343] systemd[1]: Set hostname to <budai>. [ 19.099821] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 19.100498] systemd[1]: Listening on Journal Socket (/dev/log). [ 19.100850] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 19.106316] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 19.106334] systemd[1]: Reached target Remote File Systems. [ 19.106347] systemd[1]: Reached target System Time Synchronized. [ 19.106829] systemd[1]: Listening on udev Control Socket. [ 19.222364] EXT4-fs (dm-1): re-mounted. Quota mode: none. [ 19.539657] systemd-journald[867]: Received request to flush runtime journal from PID 1 [ 20.771373] Adding 62496764k swap on /dev/mapper/budai--vg-swap. Priority:-2 extents:1 across:62496764k SS [ 20.909147] EXT4-fs (nvme0n1p2): mounting ext2 file system using the ext4 subsystem [ 20.915903] EXT4-fs (nvme0n1p2): mounted filesystem without journal. Quota mode: none. [ 20.915941] ext2 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff) [ 20.997050] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Quota mode: none. [ 21.197502] audit: type=1400 audit(1658734490.496:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1019 comm="apparmor_parser" [ 21.197554] audit: type=1400 audit(1658734490.496:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1019 comm="apparmor_parser" [ 21.197596] audit: type=1400 audit(1658734490.496:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1019 comm="apparmor_parser" [ 21.199362] audit: type=1400 audit(1658734490.496:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=1018 comm="apparmor_parser" [ 21.199412] audit: type=1400 audit(1658734490.496:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=1018 comm="apparmor_parser" [ 21.202827] audit: type=1400 audit(1658734490.500:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/chronyd" pid=1017 comm="apparmor_parser" [ 24.686989] e1000e 0000:00:1f.6 eno1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 24.687075] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready [ 323.629427] kworker/dying (22) used greatest stack depth: 10960 bytes left
On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > Xeons") wrecked intel_idle in two ways: > > > > - must not have tracing in idle functions > > - must return with IRQs disabled > > > > Additionally, it added a branch for no good reason. > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > After this change was introduced, I am seeing "WARNING: suspicious RCU > usage" when booting a kernel with debug options compiled in. Please > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > and is still present in v5.19-rc8. > > I'm not sure, is this too late to fix or revert in v5.19 final ? I finally got a chance to take a quick look at this. The rcu_eqs_exit() function is making a lockdep complaint about being invoked with interrupts enabled. This function is called from rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables interrupts before invoking rcu_eqs_exit(). The only other call to rcu_idle_exit() does not disable interrupts, but it is via rcu_user_exit(), which would be a very odd choice for cpuidle_enter_state(). It seems unlikely, but it might be that it is the use of local_irq_save() instead of raw_local_irq_save() within rcu_idle_exit() that is causing the trouble. If this is the case, then the commit shown below would help. Note that this commit removes the warning from lockdep, so it is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable equivalent debugging. Could you please try your test with the -rce commit shown below applied? Thanx, Paul ------------------------------------------------------------------------ commit ed4ae5eff4b38797607cbdd80da394149110fb37 Author: Paul E. McKenney <paulmck@kernel.org> Date: Tue May 17 21:00:04 2022 -0700 rcu: Apply noinstr to rcu_idle_enter() and rcu_idle_exit() This commit applies the "noinstr" tag to the rcu_idle_enter() and rcu_idle_exit() functions, which are invoked from portions of the idle loop that cannot be instrumented. These tags require reworking the rcu_eqs_enter() and rcu_eqs_exit() functions that these two functions invoke in order to cause them to use normal assertions rather than lockdep. In addition, within rcu_idle_exit(), the raw versions of local_irq_save() and local_irq_restore() are used, again to avoid issues with lockdep in uninstrumented code. This patch is based in part on an earlier patch by Jiri Olsa, discussions with Peter Zijlstra and Frederic Weisbecker, earlier changes by Thomas Gleixner, and off-list discussions with Yonghong Song. Link: https://lore.kernel.org/lkml/20220515203653.4039075-1-jolsa@kernel.org/ Reported-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Alexei Starovoitov <ast@kernel.org> Reported-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Yonghong Song <yhs@fb.com> diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c index c25ba442044a6..9a5edab5558c9 100644 --- a/kernel/rcu/tree.c +++ b/kernel/rcu/tree.c @@ -631,8 +631,8 @@ static noinstr void rcu_eqs_enter(bool user) return; } - lockdep_assert_irqs_disabled(); instrumentation_begin(); + lockdep_assert_irqs_disabled(); trace_rcu_dyntick(TPS("Start"), rdp->dynticks_nesting, 0, atomic_read(&rdp->dynticks)); WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !user && !is_idle_task(current)); rcu_preempt_deferred_qs(current); @@ -659,9 +659,9 @@ static noinstr void rcu_eqs_enter(bool user) * If you add or remove a call to rcu_idle_enter(), be sure to test with * CONFIG_RCU_EQS_DEBUG=y. */ -void rcu_idle_enter(void) +void noinstr rcu_idle_enter(void) { - lockdep_assert_irqs_disabled(); + WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled()); rcu_eqs_enter(false); } EXPORT_SYMBOL_GPL(rcu_idle_enter); @@ -861,7 +861,7 @@ static void noinstr rcu_eqs_exit(bool user) struct rcu_data *rdp; long oldval; - lockdep_assert_irqs_disabled(); + WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled()); rdp = this_cpu_ptr(&rcu_data); oldval = rdp->dynticks_nesting; WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && oldval < 0); @@ -896,13 +896,13 @@ static void noinstr rcu_eqs_exit(bool user) * If you add or remove a call to rcu_idle_exit(), be sure to test with * CONFIG_RCU_EQS_DEBUG=y. */ -void rcu_idle_exit(void) +void noinstr rcu_idle_exit(void) { unsigned long flags; - local_irq_save(flags); + raw_local_irq_save(flags); rcu_eqs_exit(false); - local_irq_restore(flags); + raw_local_irq_restore(flags); } EXPORT_SYMBOL_GPL(rcu_idle_exit);
On Thu, Jul 28, 2022 at 10:20:53AM -0700, Paul E. McKenney wrote: > On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > Xeons") wrecked intel_idle in two ways: > > > > > > - must not have tracing in idle functions > > > - must return with IRQs disabled > > > > > > Additionally, it added a branch for no good reason. > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > After this change was introduced, I am seeing "WARNING: suspicious RCU > > usage" when booting a kernel with debug options compiled in. Please > > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > > and is still present in v5.19-rc8. > > > > I'm not sure, is this too late to fix or revert in v5.19 final ? > > I finally got a chance to take a quick look at this. > > The rcu_eqs_exit() function is making a lockdep complaint about > being invoked with interrupts enabled. This function is called from > rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() > via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables > interrupts before invoking rcu_eqs_exit(). > > The only other call to rcu_idle_exit() does not disable interrupts, > but it is via rcu_user_exit(), which would be a very odd choice for > cpuidle_enter_state(). > > It seems unlikely, but it might be that it is the use of local_irq_save() > instead of raw_local_irq_save() within rcu_idle_exit() that is causing > the trouble. If this is the case, then the commit shown below would > help. Note that this commit removes the warning from lockdep, so it > is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable > equivalent debugging. > > Could you please try your test with the -rce commit shown below applied? Thanks for looking into it. After checking out Peter's commit 32d4fd5751ea, cherry picking your commit ed4ae5eff4b3, and setting CONFIG_RCU_EQS_DEBUG=y in addition of my usual debug config, I am now seeing this a few seconds into the boot: [ 3.010650] ------------[ cut here ]------------ [ 3.010651] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x27/0x60 [ 3.010657] Modules linked in: [ 3.010660] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc1-test-00005-g1be22fea0611 #1 [ 3.010662] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 [ 3.010663] RIP: 0010:sched_clock_tick+0x27/0x60 [ 3.010665] Code: 1f 40 00 53 eb 02 5b c3 66 90 8b 05 2f c3 40 01 85 c0 74 18 65 8b 05 60 88 8f 4e 85 c0 75 0d 65 8b 05 a9 85 8f 4e 85 c0 74 02 <0f> 0b e8 e2 6c 89 00 48 c7 c3 40 d5 02 00 89 c0 48 03 1c c5 c0 98 [ 3.010667] RSP: 0000:ffffffffb2803e28 EFLAGS: 00010002 [ 3.010670] RAX: 0000000000000001 RBX: ffffc8ce7fa07060 RCX: 0000000000000001 [ 3.010671] RDX: 0000000000000000 RSI: ffffffffb268dd21 RDI: ffffffffb269ab13 [ 3.010673] RBP: 0000000000000001 R08: ffffffffffc300d5 R09: 000000000002be80 [ 3.010674] R10: 000003625b53183a R11: ffffa012b802b7a4 R12: ffffffffb2aa9e80 [ 3.010675] R13: ffffffffb2aa9e00 R14: 0000000000000001 R15: 0000000000000000 [ 3.010677] FS: 0000000000000000(0000) GS:ffffa012b8000000(0000) knlGS:0000000000000000 [ 3.010678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.010680] CR2: ffffa012f81ff000 CR3: 0000000c99612001 CR4: 00000000003706f0 [ 3.010681] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.010682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.010683] Call Trace: [ 3.010685] <TASK> [ 3.010688] cpuidle_enter_state+0xb7/0x4b0 [ 3.010694] cpuidle_enter+0x29/0x40 [ 3.010697] do_idle+0x1d4/0x210 [ 3.010702] cpu_startup_entry+0x19/0x20 [ 3.010704] rest_init+0x117/0x1a0 [ 3.010708] arch_call_rest_init+0xa/0x10 [ 3.010711] start_kernel+0x6d8/0x6ff [ 3.010716] secondary_startup_64_no_verify+0xce/0xdb [ 3.010728] </TASK> [ 3.010729] irq event stamp: 44179 [ 3.010730] hardirqs last enabled at (44179): [<ffffffffb2000ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 3.010734] hardirqs last disabled at (44177): [<ffffffffb22003f0>] __do_softirq+0x3f0/0x498 [ 3.010736] softirqs last enabled at (44178): [<ffffffffb2200332>] __do_softirq+0x332/0x498 [ 3.010738] softirqs last disabled at (44171): [<ffffffffb16c760b>] irq_exit_rcu+0xab/0xf0 [ 3.010741] ---[ end trace 0000000000000000 ]---
On Fri, Jul 29, 2022 at 12:25 PM Michel Lespinasse <michel@lespinasse.org> wrote: > > On Thu, Jul 28, 2022 at 10:20:53AM -0700, Paul E. McKenney wrote: > > On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > > > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > > Xeons") wrecked intel_idle in two ways: > > > > > > > > - must not have tracing in idle functions > > > > - must return with IRQs disabled > > > > > > > > Additionally, it added a branch for no good reason. > > > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > After this change was introduced, I am seeing "WARNING: suspicious RCU > > > usage" when booting a kernel with debug options compiled in. Please > > > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > > > and is still present in v5.19-rc8. > > > > > > I'm not sure, is this too late to fix or revert in v5.19 final ? > > > > I finally got a chance to take a quick look at this. > > > > The rcu_eqs_exit() function is making a lockdep complaint about > > being invoked with interrupts enabled. This function is called from > > rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() > > via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables > > interrupts before invoking rcu_eqs_exit(). > > > > The only other call to rcu_idle_exit() does not disable interrupts, > > but it is via rcu_user_exit(), which would be a very odd choice for > > cpuidle_enter_state(). > > > > It seems unlikely, but it might be that it is the use of local_irq_save() > > instead of raw_local_irq_save() within rcu_idle_exit() that is causing > > the trouble. If this is the case, then the commit shown below would > > help. Note that this commit removes the warning from lockdep, so it > > is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable > > equivalent debugging. > > > > Could you please try your test with the -rce commit shown below applied? > > Thanks for looking into it. > > After checking out Peter's commit 32d4fd5751ea, > cherry picking your commit ed4ae5eff4b3, > and setting CONFIG_RCU_EQS_DEBUG=y in addition of my usual debug config, > I am now seeing this a few seconds into the boot: > > [ 3.010650] ------------[ cut here ]------------ > [ 3.010651] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x27/0x60 > [ 3.010657] Modules linked in: > [ 3.010660] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc1-test-00005-g1be22fea0611 #1 > [ 3.010662] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 > [ 3.010663] RIP: 0010:sched_clock_tick+0x27/0x60 > [ 3.010665] Code: 1f 40 00 53 eb 02 5b c3 66 90 8b 05 2f c3 40 01 85 c0 74 18 65 8b 05 60 88 8f 4e 85 c0 75 0d 65 8b 05 a9 85 8f 4e 85 c0 74 02 <0f> 0b e8 e2 6c 89 00 48 c7 c3 40 d5 02 00 > 89 c0 48 03 1c c5 c0 98 > [ 3.010667] RSP: 0000:ffffffffb2803e28 EFLAGS: 00010002 > [ 3.010670] RAX: 0000000000000001 RBX: ffffc8ce7fa07060 RCX: 0000000000000001 > [ 3.010671] RDX: 0000000000000000 RSI: ffffffffb268dd21 RDI: ffffffffb269ab13 > [ 3.010673] RBP: 0000000000000001 R08: ffffffffffc300d5 R09: 000000000002be80 > [ 3.010674] R10: 000003625b53183a R11: ffffa012b802b7a4 R12: ffffffffb2aa9e80 > [ 3.010675] R13: ffffffffb2aa9e00 R14: 0000000000000001 R15: 0000000000000000 > [ 3.010677] FS: 0000000000000000(0000) GS:ffffa012b8000000(0000) knlGS:0000000000000000 > [ 3.010678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 3.010680] CR2: ffffa012f81ff000 CR3: 0000000c99612001 CR4: 00000000003706f0 > [ 3.010681] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 3.010682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 3.010683] Call Trace: > [ 3.010685] <TASK> > [ 3.010688] cpuidle_enter_state+0xb7/0x4b0 > [ 3.010694] cpuidle_enter+0x29/0x40 > [ 3.010697] do_idle+0x1d4/0x210 > [ 3.010702] cpu_startup_entry+0x19/0x20 > [ 3.010704] rest_init+0x117/0x1a0 > [ 3.010708] arch_call_rest_init+0xa/0x10 > [ 3.010711] start_kernel+0x6d8/0x6ff > [ 3.010716] secondary_startup_64_no_verify+0xce/0xdb > [ 3.010728] </TASK> > [ 3.010729] irq event stamp: 44179 > [ 3.010730] hardirqs last enabled at (44179): [<ffffffffb2000ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 > [ 3.010734] hardirqs last disabled at (44177): [<ffffffffb22003f0>] __do_softirq+0x3f0/0x498 > [ 3.010736] softirqs last enabled at (44178): [<ffffffffb2200332>] __do_softirq+0x332/0x498 > [ 3.010738] softirqs last disabled at (44171): [<ffffffffb16c760b>] irq_exit_rcu+0xab/0xf0 > [ 3.010741] ---[ end trace 0000000000000000 ]--- Can you please give this patch a go: https://patchwork.kernel.org/project/linux-pm/patch/Yt/AxPFi88neW7W5@e126311.manchester.arm.com/ ?
On Fri, Jul 29, 2022 at 03:24:58AM -0700, Michel Lespinasse wrote: > On Thu, Jul 28, 2022 at 10:20:53AM -0700, Paul E. McKenney wrote: > > On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > > > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > > Xeons") wrecked intel_idle in two ways: > > > > > > > > - must not have tracing in idle functions > > > > - must return with IRQs disabled > > > > > > > > Additionally, it added a branch for no good reason. > > > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > After this change was introduced, I am seeing "WARNING: suspicious RCU > > > usage" when booting a kernel with debug options compiled in. Please > > > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > > > and is still present in v5.19-rc8. > > > > > > I'm not sure, is this too late to fix or revert in v5.19 final ? > > > > I finally got a chance to take a quick look at this. > > > > The rcu_eqs_exit() function is making a lockdep complaint about > > being invoked with interrupts enabled. This function is called from > > rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() > > via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables > > interrupts before invoking rcu_eqs_exit(). > > > > The only other call to rcu_idle_exit() does not disable interrupts, > > but it is via rcu_user_exit(), which would be a very odd choice for > > cpuidle_enter_state(). > > > > It seems unlikely, but it might be that it is the use of local_irq_save() > > instead of raw_local_irq_save() within rcu_idle_exit() that is causing > > the trouble. If this is the case, then the commit shown below would > > help. Note that this commit removes the warning from lockdep, so it > > is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable > > equivalent debugging. > > > > Could you please try your test with the -rce commit shown below applied? > > Thanks for looking into it. And thank you for trying this shot in the dark! > After checking out Peter's commit 32d4fd5751ea, > cherry picking your commit ed4ae5eff4b3, > and setting CONFIG_RCU_EQS_DEBUG=y in addition of my usual debug config, > I am now seeing this a few seconds into the boot: > > [ 3.010650] ------------[ cut here ]------------ > [ 3.010651] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x27/0x60 And this is again a complaint about interrupts not being disabled. But it does appear that the problem was the lockdep complaint, and eliminating that did take care of part of the problem. But lockdep remained enabled, and you therefore hit the next complaint. > [ 3.010657] Modules linked in: > [ 3.010660] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc1-test-00005-g1be22fea0611 #1 > [ 3.010662] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 > [ 3.010663] RIP: 0010:sched_clock_tick+0x27/0x60 The most straightforward way to get to sched_clock_tick() from cpuidle_enter_state() is via the call to sched_clock_idle_wakeup_event(). Except that it disables interrupts before invoking sched_clock_tick(). > [ 3.010665] Code: 1f 40 00 53 eb 02 5b c3 66 90 8b 05 2f c3 40 01 85 c0 74 18 65 8b 05 60 88 8f 4e 85 c0 75 0d 65 8b 05 a9 85 8f 4e 85 c0 74 02 <0f> 0b e8 e2 6c 89 00 48 c7 c3 40 d5 02 00 > 89 c0 48 03 1c c5 c0 98 > [ 3.010667] RSP: 0000:ffffffffb2803e28 EFLAGS: 00010002 > [ 3.010670] RAX: 0000000000000001 RBX: ffffc8ce7fa07060 RCX: 0000000000000001 > [ 3.010671] RDX: 0000000000000000 RSI: ffffffffb268dd21 RDI: ffffffffb269ab13 > [ 3.010673] RBP: 0000000000000001 R08: ffffffffffc300d5 R09: 000000000002be80 > [ 3.010674] R10: 000003625b53183a R11: ffffa012b802b7a4 R12: ffffffffb2aa9e80 > [ 3.010675] R13: ffffffffb2aa9e00 R14: 0000000000000001 R15: 0000000000000000 > [ 3.010677] FS: 0000000000000000(0000) GS:ffffa012b8000000(0000) knlGS:0000000000000000 > [ 3.010678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 3.010680] CR2: ffffa012f81ff000 CR3: 0000000c99612001 CR4: 00000000003706f0 > [ 3.010681] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > [ 3.010682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > [ 3.010683] Call Trace: > [ 3.010685] <TASK> > [ 3.010688] cpuidle_enter_state+0xb7/0x4b0 > [ 3.010694] cpuidle_enter+0x29/0x40 > [ 3.010697] do_idle+0x1d4/0x210 > [ 3.010702] cpu_startup_entry+0x19/0x20 > [ 3.010704] rest_init+0x117/0x1a0 > [ 3.010708] arch_call_rest_init+0xa/0x10 > [ 3.010711] start_kernel+0x6d8/0x6ff > [ 3.010716] secondary_startup_64_no_verify+0xce/0xdb > [ 3.010728] </TASK> > [ 3.010729] irq event stamp: 44179 > [ 3.010730] hardirqs last enabled at (44179): [<ffffffffb2000ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 > [ 3.010734] hardirqs last disabled at (44177): [<ffffffffb22003f0>] __do_softirq+0x3f0/0x498 > [ 3.010736] softirqs last enabled at (44178): [<ffffffffb2200332>] __do_softirq+0x332/0x498 > [ 3.010738] softirqs last disabled at (44171): [<ffffffffb16c760b>] irq_exit_rcu+0xab/0xf0 > [ 3.010741] ---[ end trace 0000000000000000 ]--- Would you be willing to try another shot in the dark, but untested this time? I freely admit that this is getting strange. Thanx, Paul ------------------------------------------------------------------------ diff --git a/kernel/sched/clock.c b/kernel/sched/clock.c index e374c0c923dae..279f557bf60bb 100644 --- a/kernel/sched/clock.c +++ b/kernel/sched/clock.c @@ -394,7 +394,7 @@ notrace void sched_clock_tick(void) if (!static_branch_likely(&sched_clock_running)) return; - lockdep_assert_irqs_disabled(); + WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled()); scd = this_scd(); __scd_stamp(scd);
Or better yet, try the patch that Rafael proposed. ;-) Thanx, Paul On Fri, Jul 29, 2022 at 08:26:22AM -0700, Paul E. McKenney wrote: > On Fri, Jul 29, 2022 at 03:24:58AM -0700, Michel Lespinasse wrote: > > On Thu, Jul 28, 2022 at 10:20:53AM -0700, Paul E. McKenney wrote: > > > On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > > > > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > > > Xeons") wrecked intel_idle in two ways: > > > > > > > > > > - must not have tracing in idle functions > > > > > - must return with IRQs disabled > > > > > > > > > > Additionally, it added a branch for no good reason. > > > > > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > After this change was introduced, I am seeing "WARNING: suspicious RCU > > > > usage" when booting a kernel with debug options compiled in. Please > > > > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > > > > and is still present in v5.19-rc8. > > > > > > > > I'm not sure, is this too late to fix or revert in v5.19 final ? > > > > > > I finally got a chance to take a quick look at this. > > > > > > The rcu_eqs_exit() function is making a lockdep complaint about > > > being invoked with interrupts enabled. This function is called from > > > rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() > > > via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables > > > interrupts before invoking rcu_eqs_exit(). > > > > > > The only other call to rcu_idle_exit() does not disable interrupts, > > > but it is via rcu_user_exit(), which would be a very odd choice for > > > cpuidle_enter_state(). > > > > > > It seems unlikely, but it might be that it is the use of local_irq_save() > > > instead of raw_local_irq_save() within rcu_idle_exit() that is causing > > > the trouble. If this is the case, then the commit shown below would > > > help. Note that this commit removes the warning from lockdep, so it > > > is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable > > > equivalent debugging. > > > > > > Could you please try your test with the -rce commit shown below applied? > > > > Thanks for looking into it. > > And thank you for trying this shot in the dark! > > > After checking out Peter's commit 32d4fd5751ea, > > cherry picking your commit ed4ae5eff4b3, > > and setting CONFIG_RCU_EQS_DEBUG=y in addition of my usual debug config, > > I am now seeing this a few seconds into the boot: > > > > [ 3.010650] ------------[ cut here ]------------ > > [ 3.010651] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x27/0x60 > > And this is again a complaint about interrupts not being disabled. > > But it does appear that the problem was the lockdep complaint, and > eliminating that did take care of part of the problem. But lockdep > remained enabled, and you therefore hit the next complaint. > > > [ 3.010657] Modules linked in: > > [ 3.010660] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc1-test-00005-g1be22fea0611 #1 > > [ 3.010662] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 > > [ 3.010663] RIP: 0010:sched_clock_tick+0x27/0x60 > > The most straightforward way to get to sched_clock_tick() from > cpuidle_enter_state() is via the call to sched_clock_idle_wakeup_event(). > > Except that it disables interrupts before invoking sched_clock_tick(). > > > [ 3.010665] Code: 1f 40 00 53 eb 02 5b c3 66 90 8b 05 2f c3 40 01 85 c0 74 18 65 8b 05 60 88 8f 4e 85 c0 75 0d 65 8b 05 a9 85 8f 4e 85 c0 74 02 <0f> 0b e8 e2 6c 89 00 48 c7 c3 40 d5 02 00 > > 89 c0 48 03 1c c5 c0 98 > > [ 3.010667] RSP: 0000:ffffffffb2803e28 EFLAGS: 00010002 > > [ 3.010670] RAX: 0000000000000001 RBX: ffffc8ce7fa07060 RCX: 0000000000000001 > > [ 3.010671] RDX: 0000000000000000 RSI: ffffffffb268dd21 RDI: ffffffffb269ab13 > > [ 3.010673] RBP: 0000000000000001 R08: ffffffffffc300d5 R09: 000000000002be80 > > [ 3.010674] R10: 000003625b53183a R11: ffffa012b802b7a4 R12: ffffffffb2aa9e80 > > [ 3.010675] R13: ffffffffb2aa9e00 R14: 0000000000000001 R15: 0000000000000000 > > [ 3.010677] FS: 0000000000000000(0000) GS:ffffa012b8000000(0000) knlGS:0000000000000000 > > [ 3.010678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 3.010680] CR2: ffffa012f81ff000 CR3: 0000000c99612001 CR4: 00000000003706f0 > > [ 3.010681] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > [ 3.010682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > [ 3.010683] Call Trace: > > [ 3.010685] <TASK> > > [ 3.010688] cpuidle_enter_state+0xb7/0x4b0 > > [ 3.010694] cpuidle_enter+0x29/0x40 > > [ 3.010697] do_idle+0x1d4/0x210 > > [ 3.010702] cpu_startup_entry+0x19/0x20 > > [ 3.010704] rest_init+0x117/0x1a0 > > [ 3.010708] arch_call_rest_init+0xa/0x10 > > [ 3.010711] start_kernel+0x6d8/0x6ff > > [ 3.010716] secondary_startup_64_no_verify+0xce/0xdb > > [ 3.010728] </TASK> > > [ 3.010729] irq event stamp: 44179 > > [ 3.010730] hardirqs last enabled at (44179): [<ffffffffb2000ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 > > [ 3.010734] hardirqs last disabled at (44177): [<ffffffffb22003f0>] __do_softirq+0x3f0/0x498 > > [ 3.010736] softirqs last enabled at (44178): [<ffffffffb2200332>] __do_softirq+0x332/0x498 > > [ 3.010738] softirqs last disabled at (44171): [<ffffffffb16c760b>] irq_exit_rcu+0xab/0xf0 > > [ 3.010741] ---[ end trace 0000000000000000 ]--- > > Would you be willing to try another shot in the dark, but untested > this time? I freely admit that this is getting strange. > > Thanx, Paul > > ------------------------------------------------------------------------ > > diff --git a/kernel/sched/clock.c b/kernel/sched/clock.c > index e374c0c923dae..279f557bf60bb 100644 > --- a/kernel/sched/clock.c > +++ b/kernel/sched/clock.c > @@ -394,7 +394,7 @@ notrace void sched_clock_tick(void) > if (!static_branch_likely(&sched_clock_running)) > return; > > - lockdep_assert_irqs_disabled(); > + WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled()); > > scd = this_scd(); > __scd_stamp(scd);
On Fri, Jul 29, 2022 at 08:26:22AM -0700, Paul E. McKenney wrote:> Would you be willing to try another shot in the dark, but untested > this time? I freely admit that this is getting strange. > > Thanx, Paul Yes, adding this second change got rid of the boot time warning for me. > ------------------------------------------------------------------------ > > diff --git a/kernel/sched/clock.c b/kernel/sched/clock.c > index e374c0c923dae..279f557bf60bb 100644 > --- a/kernel/sched/clock.c > +++ b/kernel/sched/clock.c > @@ -394,7 +394,7 @@ notrace void sched_clock_tick(void) > if (!static_branch_likely(&sched_clock_running)) > return; > > - lockdep_assert_irqs_disabled(); > + WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled()); > > scd = this_scd(); > __scd_stamp(scd);
On Fri, Jul 29, 2022 at 04:59:50PM +0200, Rafael J. Wysocki wrote: > On Fri, Jul 29, 2022 at 12:25 PM Michel Lespinasse > <michel@lespinasse.org> wrote: > > > > On Thu, Jul 28, 2022 at 10:20:53AM -0700, Paul E. McKenney wrote: > > > On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > > > > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > > > Xeons") wrecked intel_idle in two ways: > > > > > > > > > > - must not have tracing in idle functions > > > > > - must return with IRQs disabled > > > > > > > > > > Additionally, it added a branch for no good reason. > > > > > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > After this change was introduced, I am seeing "WARNING: suspicious RCU > > > > usage" when booting a kernel with debug options compiled in. Please > > > > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > > > > and is still present in v5.19-rc8. > > > > > > > > I'm not sure, is this too late to fix or revert in v5.19 final ? > > > > > > I finally got a chance to take a quick look at this. > > > > > > The rcu_eqs_exit() function is making a lockdep complaint about > > > being invoked with interrupts enabled. This function is called from > > > rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() > > > via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables > > > interrupts before invoking rcu_eqs_exit(). > > > > > > The only other call to rcu_idle_exit() does not disable interrupts, > > > but it is via rcu_user_exit(), which would be a very odd choice for > > > cpuidle_enter_state(). > > > > > > It seems unlikely, but it might be that it is the use of local_irq_save() > > > instead of raw_local_irq_save() within rcu_idle_exit() that is causing > > > the trouble. If this is the case, then the commit shown below would > > > help. Note that this commit removes the warning from lockdep, so it > > > is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable > > > equivalent debugging. > > > > > > Could you please try your test with the -rce commit shown below applied? > > > > Thanks for looking into it. > > > > After checking out Peter's commit 32d4fd5751ea, > > cherry picking your commit ed4ae5eff4b3, > > and setting CONFIG_RCU_EQS_DEBUG=y in addition of my usual debug config, > > I am now seeing this a few seconds into the boot: > > > > [ 3.010650] ------------[ cut here ]------------ > > [ 3.010651] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x27/0x60 > > [ 3.010657] Modules linked in: > > [ 3.010660] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc1-test-00005-g1be22fea0611 #1 > > [ 3.010662] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 > > [ 3.010663] RIP: 0010:sched_clock_tick+0x27/0x60 > > [ 3.010665] Code: 1f 40 00 53 eb 02 5b c3 66 90 8b 05 2f c3 40 01 85 c0 74 18 65 8b 05 60 88 8f 4e 85 c0 75 0d 65 8b 05 a9 85 8f 4e 85 c0 74 02 <0f> 0b e8 e2 6c 89 00 48 c7 c3 40 d5 02 00 > > 89 c0 48 03 1c c5 c0 98 > > [ 3.010667] RSP: 0000:ffffffffb2803e28 EFLAGS: 00010002 > > [ 3.010670] RAX: 0000000000000001 RBX: ffffc8ce7fa07060 RCX: 0000000000000001 > > [ 3.010671] RDX: 0000000000000000 RSI: ffffffffb268dd21 RDI: ffffffffb269ab13 > > [ 3.010673] RBP: 0000000000000001 R08: ffffffffffc300d5 R09: 000000000002be80 > > [ 3.010674] R10: 000003625b53183a R11: ffffa012b802b7a4 R12: ffffffffb2aa9e80 > > [ 3.010675] R13: ffffffffb2aa9e00 R14: 0000000000000001 R15: 0000000000000000 > > [ 3.010677] FS: 0000000000000000(0000) GS:ffffa012b8000000(0000) knlGS:0000000000000000 > > [ 3.010678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > [ 3.010680] CR2: ffffa012f81ff000 CR3: 0000000c99612001 CR4: 00000000003706f0 > > [ 3.010681] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > [ 3.010682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > [ 3.010683] Call Trace: > > [ 3.010685] <TASK> > > [ 3.010688] cpuidle_enter_state+0xb7/0x4b0 > > [ 3.010694] cpuidle_enter+0x29/0x40 > > [ 3.010697] do_idle+0x1d4/0x210 > > [ 3.010702] cpu_startup_entry+0x19/0x20 > > [ 3.010704] rest_init+0x117/0x1a0 > > [ 3.010708] arch_call_rest_init+0xa/0x10 > > [ 3.010711] start_kernel+0x6d8/0x6ff > > [ 3.010716] secondary_startup_64_no_verify+0xce/0xdb > > [ 3.010728] </TASK> > > [ 3.010729] irq event stamp: 44179 > > [ 3.010730] hardirqs last enabled at (44179): [<ffffffffb2000ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 > > [ 3.010734] hardirqs last disabled at (44177): [<ffffffffb22003f0>] __do_softirq+0x3f0/0x498 > > [ 3.010736] softirqs last enabled at (44178): [<ffffffffb2200332>] __do_softirq+0x332/0x498 > > [ 3.010738] softirqs last disabled at (44171): [<ffffffffb16c760b>] irq_exit_rcu+0xab/0xf0 > > [ 3.010741] ---[ end trace 0000000000000000 ]--- > > Can you please give this patch a go: > https://patchwork.kernel.org/project/linux-pm/patch/Yt/AxPFi88neW7W5@e126311.manchester.arm.com/ > ? I tried, but it didn't change the picture for me. I'm not sure if that was the patch you meant to send though, as it seems it's only adding a tracepoint so shouldn't make any difference if I'm not actually using the tracepoint ?
On Sat, Jul 30, 2022 at 02:40:32AM -0700, Michel Lespinasse wrote: > On Fri, Jul 29, 2022 at 08:26:22AM -0700, Paul E. McKenney wrote:> Would you be willing to try another shot in the dark, but untested > > this time? I freely admit that this is getting strange. > > > > Thanx, Paul > > Yes, adding this second change got rid of the boot time warning for me. OK, I will make a real patch. May I have your Tested-by? Thanx, Paul > > ------------------------------------------------------------------------ > > > > diff --git a/kernel/sched/clock.c b/kernel/sched/clock.c > > index e374c0c923dae..279f557bf60bb 100644 > > --- a/kernel/sched/clock.c > > +++ b/kernel/sched/clock.c > > @@ -394,7 +394,7 @@ notrace void sched_clock_tick(void) > > if (!static_branch_likely(&sched_clock_running)) > > return; > > > > - lockdep_assert_irqs_disabled(); > > + WARN_ON_ONCE(IS_ENABLED(CONFIG_RCU_EQS_DEBUG) && !raw_irqs_disabled()); > > > > scd = this_scd(); > > __scd_stamp(scd);
On Sat, Jul 30, 2022 at 11:48 AM Michel Lespinasse <michel@lespinasse.org> wrote: > > On Fri, Jul 29, 2022 at 04:59:50PM +0200, Rafael J. Wysocki wrote: > > On Fri, Jul 29, 2022 at 12:25 PM Michel Lespinasse > > <michel@lespinasse.org> wrote: > > > > > > On Thu, Jul 28, 2022 at 10:20:53AM -0700, Paul E. McKenney wrote: > > > > On Mon, Jul 25, 2022 at 12:43:06PM -0700, Michel Lespinasse wrote: > > > > > On Wed, Jun 08, 2022 at 04:27:27PM +0200, Peter Zijlstra wrote: > > > > > > Commit c227233ad64c ("intel_idle: enable interrupts before C1 on > > > > > > Xeons") wrecked intel_idle in two ways: > > > > > > > > > > > > - must not have tracing in idle functions > > > > > > - must return with IRQs disabled > > > > > > > > > > > > Additionally, it added a branch for no good reason. > > > > > > > > > > > > Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") > > > > > > Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> > > > > > > > > > > After this change was introduced, I am seeing "WARNING: suspicious RCU > > > > > usage" when booting a kernel with debug options compiled in. Please > > > > > see the attached dmesg output. The issue starts with commit 32d4fd5751ea > > > > > and is still present in v5.19-rc8. > > > > > > > > > > I'm not sure, is this too late to fix or revert in v5.19 final ? > > > > > > > > I finally got a chance to take a quick look at this. > > > > > > > > The rcu_eqs_exit() function is making a lockdep complaint about > > > > being invoked with interrupts enabled. This function is called from > > > > rcu_idle_exit(), which is an expected code path from cpuidle_enter_state() > > > > via its call to rcu_idle_exit(). Except that rcu_idle_exit() disables > > > > interrupts before invoking rcu_eqs_exit(). > > > > > > > > The only other call to rcu_idle_exit() does not disable interrupts, > > > > but it is via rcu_user_exit(), which would be a very odd choice for > > > > cpuidle_enter_state(). > > > > > > > > It seems unlikely, but it might be that it is the use of local_irq_save() > > > > instead of raw_local_irq_save() within rcu_idle_exit() that is causing > > > > the trouble. If this is the case, then the commit shown below would > > > > help. Note that this commit removes the warning from lockdep, so it > > > > is necessary to build the kernel with CONFIG_RCU_EQS_DEBUG=y to enable > > > > equivalent debugging. > > > > > > > > Could you please try your test with the -rce commit shown below applied? > > > > > > Thanks for looking into it. > > > > > > After checking out Peter's commit 32d4fd5751ea, > > > cherry picking your commit ed4ae5eff4b3, > > > and setting CONFIG_RCU_EQS_DEBUG=y in addition of my usual debug config, > > > I am now seeing this a few seconds into the boot: > > > > > > [ 3.010650] ------------[ cut here ]------------ > > > [ 3.010651] WARNING: CPU: 0 PID: 0 at kernel/sched/clock.c:397 sched_clock_tick+0x27/0x60 > > > [ 3.010657] Modules linked in: > > > [ 3.010660] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc1-test-00005-g1be22fea0611 #1 > > > [ 3.010662] Hardware name: LENOVO 30BFS44D00/1036, BIOS S03KT51A 01/17/2022 > > > [ 3.010663] RIP: 0010:sched_clock_tick+0x27/0x60 > > > [ 3.010665] Code: 1f 40 00 53 eb 02 5b c3 66 90 8b 05 2f c3 40 01 85 c0 74 18 65 8b 05 60 88 8f 4e 85 c0 75 0d 65 8b 05 a9 85 8f 4e 85 c0 74 02 <0f> 0b e8 e2 6c 89 00 48 c7 c3 40 d5 02 00 > > > 89 c0 48 03 1c c5 c0 98 > > > [ 3.010667] RSP: 0000:ffffffffb2803e28 EFLAGS: 00010002 > > > [ 3.010670] RAX: 0000000000000001 RBX: ffffc8ce7fa07060 RCX: 0000000000000001 > > > [ 3.010671] RDX: 0000000000000000 RSI: ffffffffb268dd21 RDI: ffffffffb269ab13 > > > [ 3.010673] RBP: 0000000000000001 R08: ffffffffffc300d5 R09: 000000000002be80 > > > [ 3.010674] R10: 000003625b53183a R11: ffffa012b802b7a4 R12: ffffffffb2aa9e80 > > > [ 3.010675] R13: ffffffffb2aa9e00 R14: 0000000000000001 R15: 0000000000000000 > > > [ 3.010677] FS: 0000000000000000(0000) GS:ffffa012b8000000(0000) knlGS:0000000000000000 > > > [ 3.010678] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > > > [ 3.010680] CR2: ffffa012f81ff000 CR3: 0000000c99612001 CR4: 00000000003706f0 > > > [ 3.010681] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > > > [ 3.010682] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 > > > [ 3.010683] Call Trace: > > > [ 3.010685] <TASK> > > > [ 3.010688] cpuidle_enter_state+0xb7/0x4b0 > > > [ 3.010694] cpuidle_enter+0x29/0x40 > > > [ 3.010697] do_idle+0x1d4/0x210 > > > [ 3.010702] cpu_startup_entry+0x19/0x20 > > > [ 3.010704] rest_init+0x117/0x1a0 > > > [ 3.010708] arch_call_rest_init+0xa/0x10 > > > [ 3.010711] start_kernel+0x6d8/0x6ff > > > [ 3.010716] secondary_startup_64_no_verify+0xce/0xdb > > > [ 3.010728] </TASK> > > > [ 3.010729] irq event stamp: 44179 > > > [ 3.010730] hardirqs last enabled at (44179): [<ffffffffb2000ccb>] asm_sysvec_apic_timer_interrupt+0x1b/0x20 > > > [ 3.010734] hardirqs last disabled at (44177): [<ffffffffb22003f0>] __do_softirq+0x3f0/0x498 > > > [ 3.010736] softirqs last enabled at (44178): [<ffffffffb2200332>] __do_softirq+0x332/0x498 > > > [ 3.010738] softirqs last disabled at (44171): [<ffffffffb16c760b>] irq_exit_rcu+0xab/0xf0 > > > [ 3.010741] ---[ end trace 0000000000000000 ]--- > > > > Can you please give this patch a go: > > https://patchwork.kernel.org/project/linux-pm/patch/Yt/AxPFi88neW7W5@e126311.manchester.arm.com/ > > ? > > I tried, but it didn't change the picture for me. > > I'm not sure if that was the patch you meant to send though, as it > seems it's only adding a tracepoint so shouldn't make any difference > if I'm not actually using the tracepoint ? You are right, it looks like I pasted a link to a different patch by mistake. Sorry about that. I meant this one: https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/commit/?h=pm&id=d295ad34f236c3518634fb6403d4c0160456e470 which will appear in the final 5.19.
On Sat, Jul 30, 2022 at 09:52:34PM +0200, Rafael J. Wysocki wrote: > On Sat, Jul 30, 2022 at 11:48 AM Michel Lespinasse > <michel@lespinasse.org> wrote: > > I'm not sure if that was the patch you meant to send though, as it > > seems it's only adding a tracepoint so shouldn't make any difference > > if I'm not actually using the tracepoint ? > > You are right, it looks like I pasted a link to a different patch by > mistake. Sorry about that. > > I meant this one: > > https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/commit/?h=pm&id=d295ad34f236c3518634fb6403d4c0160456e470 > > which will appear in the final 5.19. Thanks. I can confirm that this patch fixes the boot time debug warnings for me. And I see that linus already merged it, nice! -- Michel "walken" Lespinasse.
--- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -129,21 +137,37 @@ static unsigned int mwait_substates __in * * Must be called under local_irq_disable(). */ + -static __cpuidle int intel_idle(struct cpuidle_device *dev, - struct cpuidle_driver *drv, int index) +static __always_inline int __intel_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) { struct cpuidle_state *state = &drv->states[index]; unsigned long eax = flg2MWAIT(state->flags); unsigned long ecx = 1; /* break on interrupt flag */ - if (state->flags & CPUIDLE_FLAG_IRQ_ENABLE) - local_irq_enable(); - mwait_idle_with_hints(eax, ecx); return index; } +static __cpuidle int intel_idle(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + return __intel_idle(dev, drv, index); +} + +static __cpuidle int intel_idle_irq(struct cpuidle_device *dev, + struct cpuidle_driver *drv, int index) +{ + int ret; + + raw_local_irq_enable(); + ret = __intel_idle(dev, drv, index); + raw_local_irq_disable(); + + return ret; +} + /** * intel_idle_s2idle - Ask the processor to enter the given idle state. * @dev: cpuidle device of the target CPU. @@ -1801,6 +1824,9 @@ static void __init intel_idle_init_cstat /* Structure copy. */ drv->states[drv->state_count] = cpuidle_state_table[cstate]; + if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_IRQ_ENABLE) + drv->states[drv->state_count].enter = intel_idle_irq; + if ((disabled_states_mask & BIT(drv->state_count)) || ((icpu->use_acpi || force_use_acpi) && intel_idle_off_by_default(mwait_hint) &&
Commit c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") wrecked intel_idle in two ways: - must not have tracing in idle functions - must return with IRQs disabled Additionally, it added a branch for no good reason. Fixes: c227233ad64c ("intel_idle: enable interrupts before C1 on Xeons") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> --- drivers/idle/intel_idle.c | 48 +++++++++++++++++++++++++++++++++++----------- 1 file changed, 37 insertions(+), 11 deletions(-)