| Message ID | 20220802153434.v3.6.I969118a35934a0e5007fe4f80e3e28e9c0b7602a@changeid (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | drm/msm/dsi regulator improvements | expand |
On 03/08/2022 01:37, Douglas Anderson wrote: > The dsi_phy_driver_probe() function has a "goto fail" for no > reason. Change it to just always return directly when it sees an > error. Make this simpler by leveraging dev_err_probe() which is > designed to make code like this shorter / simpler. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Minor nit below. > --- > > Changes in v3: > - ("Improve dsi_phy_driver_probe() probe error handling") new for v3. > > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 74 ++++++++++----------------- > 1 file changed, 27 insertions(+), 47 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > index 0a00f9b73fc5..57cd525de7a1 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > @@ -621,12 +621,9 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) > phy->pdev = pdev; > > phy->id = dsi_phy_get_id(phy); > - if (phy->id < 0) { > - ret = phy->id; > - DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n", > - __func__, ret); > - goto fail; > - } > + if (phy->id < 0) > + return dev_err_probe(dev, phy->id, > + "Couldn't identify PHY index\n"); > > phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, > "qcom,dsi-phy-regulator-ldo-mode"); > @@ -634,88 +631,71 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) > phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); > > phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); > - if (IS_ERR(phy->base)) { > - DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); > - ret = -ENOMEM; Here (and in a few cases later) this changes the error code from crafted -ENOMEM to the proper one returned by msm_ioremap_size(). This should be mentioned in the commit message. > - goto fail; > - } > + if (IS_ERR(phy->base)) > + return dev_err_probe(dev, PTR_ERR(phy->base), > + "Failed to map phy base\n"); > > phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size); > - if (IS_ERR(phy->pll_base)) { > - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->pll_base)) > + return dev_err_probe(dev, PTR_ERR(phy->pll_base), > + "Failed to map pll base\n"); > > if (phy->cfg->has_phy_lane) { > phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size); > - if (IS_ERR(phy->lane_base)) { > - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->lane_base)) > + return dev_err_probe(dev, PTR_ERR(phy->lane_base), > + "Failed to map phy lane base\n"); > } > > if (phy->cfg->has_phy_regulator) { > phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size); > - if (IS_ERR(phy->reg_base)) { > - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->reg_base)) > + return dev_err_probe(dev, PTR_ERR(phy->reg_base), > + "Failed to map phy regulator base\n"); > } > > if (phy->cfg->ops.parse_dt_properties) { > ret = phy->cfg->ops.parse_dt_properties(phy); > if (ret) > - goto fail; > + return ret; > } > > ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators, > phy->cfg->regulator_data, > &phy->supplies); > if (ret) > - goto fail; > + return ret; > > phy->ahb_clk = msm_clk_get(pdev, "iface"); > - if (IS_ERR(phy->ahb_clk)) { > - DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__); > - ret = PTR_ERR(phy->ahb_clk); > - goto fail; > - } > + if (IS_ERR(phy->ahb_clk)) > + return dev_err_probe(dev, PTR_ERR(phy->ahb_clk), > + "Unable to get ahb clk\n"); > > /* PLL init will call into clk_register which requires > * register access, so we need to enable power and ahb clock. > */ > ret = dsi_phy_enable_resource(phy); > if (ret) > - goto fail; > + return ret; > > if (phy->cfg->ops.pll_init) { > ret = phy->cfg->ops.pll_init(phy); > - if (ret) { > - DRM_DEV_INFO(dev, > - "%s: pll init failed: %d, need separate pll clk driver\n", > - __func__, ret); > - goto fail; > - } > + if (ret) > + return dev_err_probe(dev, ret, > + "PLL init failed; need separate clk driver\n"); > } > > ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > phy->provided_clocks); > - if (ret) { > - DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret); > - goto fail; > - } > + if (ret) > + return dev_err_probe(dev, ret, > + "Failed to register clk provider\n"); > > dsi_phy_disable_resource(phy); > > platform_set_drvdata(pdev, phy); > > return 0; > - > -fail: > - return ret; > } > > static struct platform_driver dsi_phy_platform_driver = {
Hi, On Wed, Aug 3, 2022 at 12:32 AM Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote: > > > @@ -634,88 +631,71 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) > > phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); > > > > phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); > > - if (IS_ERR(phy->base)) { > > - DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); > > - ret = -ENOMEM; > > Here (and in a few cases later) this changes the error code from crafted > -ENOMEM to the proper one returned by msm_ioremap_size(). This should be > mentioned in the commit message. Good point. Unless something comes up I'll plan to spin a v4 with this change to the commit message tomorrow. -Doug
On 8/2/2022 3:37 PM, Douglas Anderson wrote: > The dsi_phy_driver_probe() function has a "goto fail" for no > reason. Change it to just always return directly when it sees an > error. Make this simpler by leveraging dev_err_probe() which is > designed to make code like this shorter / simpler. > > Signed-off-by: Douglas Anderson <dianders@chromium.org> Yes, apart from Dmitry's suggestion of updating the commit text about the return value change, this is: Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> > --- > > Changes in v3: > - ("Improve dsi_phy_driver_probe() probe error handling") new for v3. > > drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 74 ++++++++++----------------- > 1 file changed, 27 insertions(+), 47 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > index 0a00f9b73fc5..57cd525de7a1 100644 > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c > @@ -621,12 +621,9 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) > phy->pdev = pdev; > > phy->id = dsi_phy_get_id(phy); > - if (phy->id < 0) { > - ret = phy->id; > - DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n", > - __func__, ret); > - goto fail; > - } > + if (phy->id < 0) > + return dev_err_probe(dev, phy->id, > + "Couldn't identify PHY index\n"); > > phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, > "qcom,dsi-phy-regulator-ldo-mode"); > @@ -634,88 +631,71 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) > phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); > > phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); > - if (IS_ERR(phy->base)) { > - DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->base)) > + return dev_err_probe(dev, PTR_ERR(phy->base), > + "Failed to map phy base\n"); > > phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size); > - if (IS_ERR(phy->pll_base)) { > - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->pll_base)) > + return dev_err_probe(dev, PTR_ERR(phy->pll_base), > + "Failed to map pll base\n"); > > if (phy->cfg->has_phy_lane) { > phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size); > - if (IS_ERR(phy->lane_base)) { > - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->lane_base)) > + return dev_err_probe(dev, PTR_ERR(phy->lane_base), > + "Failed to map phy lane base\n"); > } > > if (phy->cfg->has_phy_regulator) { > phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size); > - if (IS_ERR(phy->reg_base)) { > - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__); > - ret = -ENOMEM; > - goto fail; > - } > + if (IS_ERR(phy->reg_base)) > + return dev_err_probe(dev, PTR_ERR(phy->reg_base), > + "Failed to map phy regulator base\n"); > } > > if (phy->cfg->ops.parse_dt_properties) { > ret = phy->cfg->ops.parse_dt_properties(phy); > if (ret) > - goto fail; > + return ret; > } > > ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators, > phy->cfg->regulator_data, > &phy->supplies); > if (ret) > - goto fail; > + return ret; > > phy->ahb_clk = msm_clk_get(pdev, "iface"); > - if (IS_ERR(phy->ahb_clk)) { > - DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__); > - ret = PTR_ERR(phy->ahb_clk); > - goto fail; > - } > + if (IS_ERR(phy->ahb_clk)) > + return dev_err_probe(dev, PTR_ERR(phy->ahb_clk), > + "Unable to get ahb clk\n"); > > /* PLL init will call into clk_register which requires > * register access, so we need to enable power and ahb clock. > */ > ret = dsi_phy_enable_resource(phy); > if (ret) > - goto fail; > + return ret; > > if (phy->cfg->ops.pll_init) { > ret = phy->cfg->ops.pll_init(phy); > - if (ret) { > - DRM_DEV_INFO(dev, > - "%s: pll init failed: %d, need separate pll clk driver\n", > - __func__, ret); > - goto fail; > - } > + if (ret) > + return dev_err_probe(dev, ret, > + "PLL init failed; need separate clk driver\n"); > } > > ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, > phy->provided_clocks); > - if (ret) { > - DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret); > - goto fail; > - } > + if (ret) > + return dev_err_probe(dev, ret, > + "Failed to register clk provider\n"); > > dsi_phy_disable_resource(phy); > > platform_set_drvdata(pdev, phy); > > return 0; > - > -fail: > - return ret; > } > > static struct platform_driver dsi_phy_platform_driver = {
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 0a00f9b73fc5..57cd525de7a1 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -621,12 +621,9 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) phy->pdev = pdev; phy->id = dsi_phy_get_id(phy); - if (phy->id < 0) { - ret = phy->id; - DRM_DEV_ERROR(dev, "%s: couldn't identify PHY index, %d\n", - __func__, ret); - goto fail; - } + if (phy->id < 0) + return dev_err_probe(dev, phy->id, + "Couldn't identify PHY index\n"); phy->regulator_ldo_mode = of_property_read_bool(dev->of_node, "qcom,dsi-phy-regulator-ldo-mode"); @@ -634,88 +631,71 @@ static int dsi_phy_driver_probe(struct platform_device *pdev) phy->cphy_mode = (phy_type == PHY_TYPE_CPHY); phy->base = msm_ioremap_size(pdev, "dsi_phy", &phy->base_size); - if (IS_ERR(phy->base)) { - DRM_DEV_ERROR(dev, "%s: failed to map phy base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->base)) + return dev_err_probe(dev, PTR_ERR(phy->base), + "Failed to map phy base\n"); phy->pll_base = msm_ioremap_size(pdev, "dsi_pll", &phy->pll_size); - if (IS_ERR(phy->pll_base)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map pll base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->pll_base)) + return dev_err_probe(dev, PTR_ERR(phy->pll_base), + "Failed to map pll base\n"); if (phy->cfg->has_phy_lane) { phy->lane_base = msm_ioremap_size(pdev, "dsi_phy_lane", &phy->lane_size); - if (IS_ERR(phy->lane_base)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy lane base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->lane_base)) + return dev_err_probe(dev, PTR_ERR(phy->lane_base), + "Failed to map phy lane base\n"); } if (phy->cfg->has_phy_regulator) { phy->reg_base = msm_ioremap_size(pdev, "dsi_phy_regulator", &phy->reg_size); - if (IS_ERR(phy->reg_base)) { - DRM_DEV_ERROR(&pdev->dev, "%s: failed to map phy regulator base\n", __func__); - ret = -ENOMEM; - goto fail; - } + if (IS_ERR(phy->reg_base)) + return dev_err_probe(dev, PTR_ERR(phy->reg_base), + "Failed to map phy regulator base\n"); } if (phy->cfg->ops.parse_dt_properties) { ret = phy->cfg->ops.parse_dt_properties(phy); if (ret) - goto fail; + return ret; } ret = devm_regulator_bulk_get_const(dev, phy->cfg->num_regulators, phy->cfg->regulator_data, &phy->supplies); if (ret) - goto fail; + return ret; phy->ahb_clk = msm_clk_get(pdev, "iface"); - if (IS_ERR(phy->ahb_clk)) { - DRM_DEV_ERROR(dev, "%s: Unable to get ahb clk\n", __func__); - ret = PTR_ERR(phy->ahb_clk); - goto fail; - } + if (IS_ERR(phy->ahb_clk)) + return dev_err_probe(dev, PTR_ERR(phy->ahb_clk), + "Unable to get ahb clk\n"); /* PLL init will call into clk_register which requires * register access, so we need to enable power and ahb clock. */ ret = dsi_phy_enable_resource(phy); if (ret) - goto fail; + return ret; if (phy->cfg->ops.pll_init) { ret = phy->cfg->ops.pll_init(phy); - if (ret) { - DRM_DEV_INFO(dev, - "%s: pll init failed: %d, need separate pll clk driver\n", - __func__, ret); - goto fail; - } + if (ret) + return dev_err_probe(dev, ret, + "PLL init failed; need separate clk driver\n"); } ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, phy->provided_clocks); - if (ret) { - DRM_DEV_ERROR(dev, "%s: failed to register clk provider: %d\n", __func__, ret); - goto fail; - } + if (ret) + return dev_err_probe(dev, ret, + "Failed to register clk provider\n"); dsi_phy_disable_resource(phy); platform_set_drvdata(pdev, phy); return 0; - -fail: - return ret; } static struct platform_driver dsi_phy_platform_driver = {
The dsi_phy_driver_probe() function has a "goto fail" for no reason. Change it to just always return directly when it sees an error. Make this simpler by leveraging dev_err_probe() which is designed to make code like this shorter / simpler. Signed-off-by: Douglas Anderson <dianders@chromium.org> --- Changes in v3: - ("Improve dsi_phy_driver_probe() probe error handling") new for v3. drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 74 ++++++++++----------------- 1 file changed, 27 insertions(+), 47 deletions(-)