| Message ID | 20220715122903.332535-5-nuno.sa@analog.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | make iio inkern interface firmware agnostic | expand |
On Fri, 15 Jul 2022 14:28:52 +0200 Nuno Sá <nuno.sa@analog.com> wrote: > This change splits of_iio_channel_get_by_name() so that it decouples > looking for channels in the current node from looking in it's parents > nodes. This will be helpful when moving to fwnode properties where we > need to release the handles when looking for channels in parent's nodes. > > No functional change intended... > > Signed-off-by: Nuno Sá <nuno.sa@analog.com> > Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> A few things from a build test (after hand applying this because of issues with the comment thing following through the series). Seem obvious so I fixed them up. > --- > drivers/iio/inkern.c | 109 ++++++++++++++++++++++++++----------------- > 1 file changed, 65 insertions(+), 44 deletions(-) > > diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c > index c6f1cfe09bd3..f97b7967d3d9 100644 > --- a/drivers/iio/inkern.c > +++ b/drivers/iio/inkern.c > @@ -211,61 +211,82 @@ static struct iio_channel *of_iio_channel_get(struct device_node *np, int index) > return ERR_PTR(err); > } > > +struct iio_channel *__of_iio_channel_get_by_name(struct device_node *np, static > + const char *name) > +{ > + struct iio_channel *chan; > + int index = 0; > + > + /* > + * For named iio channels, first look up the name in the > + * "io-channel-names" property. If it cannot be found, the > + * index will be an error code, and of_iio_channel_get() > + * will fail. > + */ > + if (name) > + index = of_property_match_string(np, "io-channel-names", name); > + > + chan = of_iio_channel_get(np, index); > + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) > + return chan; > + if (name) { > + if (index >= 0) { > + pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", > + np, name, index); > + /* > + * In this case, we found 'name' in 'io-channel-names' > + * but somehow we still fail so that we should not proceed > + * with any other lookup. Hence, explicitly return -EINVAL > + * (maybe not the better error code) so that the caller > + * won't do a system lookup. > + */ > + return ERR_PTR(-EINVAL); > + } > + /* If index < 0, then of_parse_phandle_with_args() fails > + * with -EINVAL which is expected. We should not proceed > + * if we get any other error. > + */ > + if (PTR_ERR(chan) != -EINVAL) > + return chan; > + } else if (PTR_ERR(chan) != -ENOENT) { > + /* > + * if !name, then we should only proceed the lookup if > + * of_parse_phandle_with_args() returns -ENOENT. > + */ > + return chan; > + } > + > + /* so we continue the lookup */ > + return ERR_PTR(-ENODEV); > +} > + > struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, > const char *name) > { > struct iio_channel *chan; > > /* Walk up the tree of devices looking for a matching iio channel */ > + chan = __of_iio_channel_get_by_name(np, name); > + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) > + return chan; > + > + /* > + * No matching IIO channel found on this node. > + * If the parent node has a "io-channel-ranges" property, > + * then we can try one of its channels. > + */ > + np = np->parent; > while (np) { > int index = 0; Not used. > > - /* > - * For named iio channels, first look up the name in the > - * "io-channel-names" property. If it cannot be found, the > - * index will be an error code, and of_iio_channel_get() > - * will fail. > - */ > - if (name) > - index = of_property_match_string(np, "io-channel-names", > - name); > - chan = of_iio_channel_get(np, index); > - if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) > - return chan; > - if (name) { > - if (index >= 0) { > - pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", > - np, name, index); > - /* > - * In this case, we found 'name' in 'io-channel-names' > - * but somehow we still fail so that we should not proceed > - * with any other lookup. Hence, explicitly return -EINVAL > - * (maybe not the better error code) so that the caller > - * won't do a system lookup. > - */ > - return ERR_PTR(-EINVAL); > - } > - /* If index < 0, then of_parse_phandle_with_args() fails > - * with -EINVAL which is expected. We should not proceed > - * if we get any other error. > - */ > - if (PTR_ERR(chan) != -EINVAL) > - return chan; > - } else if (PTR_ERR(chan) != -ENOENT) { > - /* > - * if !name, then we should only proceed the lookup if > - * of_parse_phandle_with_args() returns -ENOENT. > - */ > + if (!of_get_property(np, "io-channel-ranges", NULL)) > + return ERR_PTR(-ENODEV); > + > + chan = __of_iio_channel_get_by_name(np, name); > + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) > return chan; > - } > - /* > - * No matching IIO channel found on this node. > - * If the parent node has a "io-channel-ranges" property, > - * then we can try one of its channels. > - */ > + > np = np->parent; > - if (np && !of_get_property(np, "io-channel-ranges", NULL)) > - return ERR_PTR(-ENODEV); > } > > return ERR_PTR(-ENODEV);
diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index c6f1cfe09bd3..f97b7967d3d9 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -211,61 +211,82 @@ static struct iio_channel *of_iio_channel_get(struct device_node *np, int index) return ERR_PTR(err); } +struct iio_channel *__of_iio_channel_get_by_name(struct device_node *np, + const char *name) +{ + struct iio_channel *chan; + int index = 0; + + /* + * For named iio channels, first look up the name in the + * "io-channel-names" property. If it cannot be found, the + * index will be an error code, and of_iio_channel_get() + * will fail. + */ + if (name) + index = of_property_match_string(np, "io-channel-names", name); + + chan = of_iio_channel_get(np, index); + if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) + return chan; + if (name) { + if (index >= 0) { + pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", + np, name, index); + /* + * In this case, we found 'name' in 'io-channel-names' + * but somehow we still fail so that we should not proceed + * with any other lookup. Hence, explicitly return -EINVAL + * (maybe not the better error code) so that the caller + * won't do a system lookup. + */ + return ERR_PTR(-EINVAL); + } + /* If index < 0, then of_parse_phandle_with_args() fails + * with -EINVAL which is expected. We should not proceed + * if we get any other error. + */ + if (PTR_ERR(chan) != -EINVAL) + return chan; + } else if (PTR_ERR(chan) != -ENOENT) { + /* + * if !name, then we should only proceed the lookup if + * of_parse_phandle_with_args() returns -ENOENT. + */ + return chan; + } + + /* so we continue the lookup */ + return ERR_PTR(-ENODEV); +} + struct iio_channel *of_iio_channel_get_by_name(struct device_node *np, const char *name) { struct iio_channel *chan; /* Walk up the tree of devices looking for a matching iio channel */ + chan = __of_iio_channel_get_by_name(np, name); + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) + return chan; + + /* + * No matching IIO channel found on this node. + * If the parent node has a "io-channel-ranges" property, + * then we can try one of its channels. + */ + np = np->parent; while (np) { int index = 0; - /* - * For named iio channels, first look up the name in the - * "io-channel-names" property. If it cannot be found, the - * index will be an error code, and of_iio_channel_get() - * will fail. - */ - if (name) - index = of_property_match_string(np, "io-channel-names", - name); - chan = of_iio_channel_get(np, index); - if (!IS_ERR(chan) || PTR_ERR(chan) == -EPROBE_DEFER) - return chan; - if (name) { - if (index >= 0) { - pr_err("ERROR: could not get IIO channel %pOF:%s(%i)\n", - np, name, index); - /* - * In this case, we found 'name' in 'io-channel-names' - * but somehow we still fail so that we should not proceed - * with any other lookup. Hence, explicitly return -EINVAL - * (maybe not the better error code) so that the caller - * won't do a system lookup. - */ - return ERR_PTR(-EINVAL); - } - /* If index < 0, then of_parse_phandle_with_args() fails - * with -EINVAL which is expected. We should not proceed - * if we get any other error. - */ - if (PTR_ERR(chan) != -EINVAL) - return chan; - } else if (PTR_ERR(chan) != -ENOENT) { - /* - * if !name, then we should only proceed the lookup if - * of_parse_phandle_with_args() returns -ENOENT. - */ + if (!of_get_property(np, "io-channel-ranges", NULL)) + return ERR_PTR(-ENODEV); + + chan = __of_iio_channel_get_by_name(np, name); + if (!IS_ERR(chan) || PTR_ERR(chan) != -ENODEV) return chan; - } - /* - * No matching IIO channel found on this node. - * If the parent node has a "io-channel-ranges" property, - * then we can try one of its channels. - */ + np = np->parent; - if (np && !of_get_property(np, "io-channel-ranges", NULL)) - return ERR_PTR(-ENODEV); } return ERR_PTR(-ENODEV);