diff mbox series

[RESEND] net: ethernet: ti: davinci_mdio: Add workaround for errata i2329

Message ID 20220808111229.11951-1-r-gunasekaran@ti.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series [RESEND] net: ethernet: ti: davinci_mdio: Add workaround for errata i2329 | expand

Checks

Context Check Description
netdev/tree_selection success Guessed tree name to be net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 4 maintainers not CCed: keescook@chromium.org gustavoars@kernel.org chi.minghao@zte.com.cn grygorii.strashko@ti.com
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch warning WARNING: line length of 81 exceeds 80 columns
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Ravi Gunasekaran Aug. 8, 2022, 11:12 a.m. UTC 
On the CPSW and ICSS peripherals, there is a possibility that the MDIO
interface returns corrupt data on MDIO reads or writes incorrect data
on MDIO writes. There is also a possibility for the MDIO interface to
become unavailable until the next peripheral reset.

The workaround is to configure the MDIO in manual mode and disable the
MDIO state machine and emulate the MDIO protocol by reading and writing
appropriate fields in MDIO_MANUAL_IF_REG register of the MDIO controller
to manipulate the MDIO clock and data pins.

More details about the errata i2329 and the workaround is available in:
https://www.ti.com/lit/er/sprz487a/sprz487a.pdf

Add implementation to disable MDIO state machine, configure MDIO in manual
mode and achieve MDIO read and writes via software instructions

Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
---
 drivers/net/ethernet/ti/davinci_mdio.c | 336 ++++++++++++++++++++++++-
 1 file changed, 331 insertions(+), 5 deletions(-)

Comments

Andrew Lunn Aug. 8, 2022, 8:13 p.m. UTC | #1 
> +static int davinci_mdio_sw_read(struct mii_bus *bus, int phy_id, int phy_reg)
> +{
> +	struct davinci_mdio_data *data = bus->priv;
> +	u32 reg, i;
> +	int ret;
> +	u8 ack;
> +
> +	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
> +		return -EINVAL;
> +
> +	ret = pm_runtime_get_sync(data->dev);
> +	if (ret < 0) {
> +		pm_runtime_put_noidle(data->dev);
> +		return ret;
> +	}
> +
> +	davinci_mdio_disable(data);
> +	davinci_mdio_enable_manual_mode(data);
> +	davinci_mdio_sw_preamble(data);
> +
> +	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
> +	davinci_mdio_sw_set_bit(data, MDIO_OE);
> +
> +	 /* Issue clause 22 MII read function {0,1,1,0} */
> +	davinci_mdio_man_send_pattern(data, C22_BITRANGE, C22_READ_PATTERN);
> +
> +	/* Send the device number MSB first */
> +	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_id);
> +
> +	/* Send the register number MSB first */
> +	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_reg);
> +
> +	/* Send turn around cycles */
> +	davinci_mdio_sw_clr_bit(data, MDIO_OE);
> +
> +	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
> +
> +	ack = davinci_mdio_test_man_bit(data, MDIO_PIN);
> +	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
> +
> +	reg = 0;
> +	if (ack == 0) {
> +		for (i = MDIO_BITRANGE; i; i = i >> 1) {
> +			if (davinci_mdio_test_man_bit(data, MDIO_PIN))
> +				reg |= i;
> +
> +			davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
> +		}
> +	} else {
> +		for (i = MDIO_BITRANGE; i; i = i >> 1)
> +			davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
> +
> +		reg = 0xFFFF;
> +	}
> +
> +	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
> +	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
> +	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
> +	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);

You appear to of re-invented drivers/net/mdio/mdio-bitbang.c

If there is a reason this cannot be used, please at least state it in
the commit message.

    Andrew
Ravi Gunasekaran Aug. 9, 2022, 11:30 a.m. UTC | #2 
Hello Andrew,

On 09/08/22 1:43 am, Andrew Lunn wrote:
>> +static int davinci_mdio_sw_read(struct mii_bus *bus, int phy_id, int phy_reg)
>> +{
>> +	struct davinci_mdio_data *data = bus->priv;
>> +	u32 reg, i;
>> +	int ret;
>> +	u8 ack;
>> +
>> +	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
>> +		return -EINVAL;
>> +
>> +	ret = pm_runtime_get_sync(data->dev);
>> +	if (ret < 0) {
>> +		pm_runtime_put_noidle(data->dev);
>> +		return ret;
>> +	}
>> +
>> +	davinci_mdio_disable(data);
>> +	davinci_mdio_enable_manual_mode(data);
>> +	davinci_mdio_sw_preamble(data);
>> +
>> +	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
>> +	davinci_mdio_sw_set_bit(data, MDIO_OE);
>> +
>> +	 /* Issue clause 22 MII read function {0,1,1,0} */
>> +	davinci_mdio_man_send_pattern(data, C22_BITRANGE, C22_READ_PATTERN);
>> +
>> +	/* Send the device number MSB first */
>> +	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_id);
>> +
>> +	/* Send the register number MSB first */
>> +	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_reg);
>> +
>> +	/* Send turn around cycles */
>> +	davinci_mdio_sw_clr_bit(data, MDIO_OE);
>> +
>> +	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
>> +
>> +	ack = davinci_mdio_test_man_bit(data, MDIO_PIN);
>> +	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
>> +
>> +	reg = 0;
>> +	if (ack == 0) {
>> +		for (i = MDIO_BITRANGE; i; i = i >> 1) {
>> +			if (davinci_mdio_test_man_bit(data, MDIO_PIN))
>> +				reg |= i;
>> +
>> +			davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
>> +		}
>> +	} else {
>> +		for (i = MDIO_BITRANGE; i; i = i >> 1)
>> +			davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
>> +
>> +		reg = 0xFFFF;
>> +	}
>> +
>> +	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
>> +	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
>> +	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
>> +	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
> 
> You appear to of re-invented drivers/net/mdio/mdio-bitbang.c
> 
> If there is a reason this cannot be used, please at least state it in
> the commit message.
>
Thanks for reviewing the patch. Since mdiobb_{read,write}() are exported, I can 
invoke these in my mdio read/write implementation. I will rework and send the v2 patch

>      Andrew
Andrew Lunn Aug. 9, 2022, 5:10 p.m. UTC | #3 
> Thanks for reviewing the patch. Since mdiobb_{read,write}() are exported, I
> can invoke these in my mdio read/write implementation. I will rework and
> send the v2 patch

What you should do is fill a struct mdiobb_ops and pass it to
alloc_mdio_bitbang(). It looks like you can provide:

struct mdiobb_ops {
	struct module *owner;

	/* Set the Management Data Clock high if level is one,
	 * low if level is zero.
	 */
	void (*set_mdc)(struct mdiobb_ctrl *ctrl, int level);

	/* Configure the Management Data I/O pin as an input if
	 * "output" is zero, or an output if "output" is one.
	 */
	void (*set_mdio_dir)(struct mdiobb_ctrl *ctrl, int output);

	/* Set the Management Data I/O pin high if value is one,
	 * low if "value" is zero.  This may only be called
	 * when the MDIO pin is configured as an output.
	 */
	void (*set_mdio_data)(struct mdiobb_ctrl *ctrl, int value);

	/* Retrieve the state Management Data I/O pin. */
	int (*get_mdio_data)(struct mdiobb_ctrl *ctrl);
};

Look at ravb_mdio_init() for an example, and there are a few others.

     Andrew
diff mbox series

Patch

diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index ea3772618043..20f979ef1faf 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -26,6 +26,7 @@ 
 #include <linux/of_device.h>
 #include <linux/of_mdio.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/sys_soc.h>
 
 /*
  * This timeout definition is a worst-case ultra defensive measure against
@@ -39,8 +40,16 @@ 
 
 #define DEF_OUT_FREQ		2200000		/* 2.2 MHz */
 
+#define MDIO_BITRANGE		0x8000
+#define C22_READ_PATTERN	0x6
+#define C22_WRITE_PATTERN	0x5
+#define C22_BITRANGE		0x8
+#define PHY_BITRANGE		0x10
+#define PHY_DATA_BITRANGE	0x8000
+
 struct davinci_mdio_of_param {
 	int autosuspend_delay_ms;
+	bool manual_mode;
 };
 
 struct davinci_mdio_regs {
@@ -49,6 +58,12 @@  struct davinci_mdio_regs {
 #define CONTROL_IDLE		BIT(31)
 #define CONTROL_ENABLE		BIT(30)
 #define CONTROL_MAX_DIV		(0xffff)
+#define CONTROL_CLKDIV		GENMASK(15, 0)
+
+#define MDIO_MAN_MDCLK_O	BIT(2)
+#define MDIO_MAN_OE		BIT(1)
+#define MDIO_MAN_PIN		BIT(0)
+#define MDIO_MANUALMODE		BIT(31)
 
 	u32	alive;
 	u32	link;
@@ -59,7 +74,9 @@  struct davinci_mdio_regs {
 	u32	userintmasked;
 	u32	userintmaskset;
 	u32	userintmaskclr;
-	u32	__reserved_1[20];
+	u32	manualif;
+	u32	poll;
+	u32	__reserved_1[18];
 
 	struct {
 		u32	access;
@@ -73,6 +90,11 @@  struct davinci_mdio_regs {
 	}	user[];
 };
 
+enum davinci_mdio_manual {
+	MDIO_PIN = 0,
+	MDIO_OE,
+	MDIO_MDCLK,
+};
 static const struct mdio_platform_data default_pdata = {
 	.bus_freq = DEF_OUT_FREQ,
 };
@@ -90,6 +112,8 @@  struct davinci_mdio_data {
 	 */
 	bool		skip_scan;
 	u32		clk_div;
+	u32		mdio_manualif;
+	bool		manual_mode;
 };
 
 static void davinci_mdio_init_clk(struct davinci_mdio_data *data)
@@ -122,12 +146,257 @@  static void davinci_mdio_init_clk(struct davinci_mdio_data *data)
 		data->access_time = 1;
 }
 
+static void davinci_mdio_disable(struct davinci_mdio_data *data)
+{
+	u32 reg;
+
+	/* Disable MDIO state machine */
+	reg = readl(&data->regs->control);
+
+	reg &= ~CONTROL_CLKDIV;
+	reg |= data->clk_div;
+
+	reg &= ~CONTROL_ENABLE;
+	writel(reg, &data->regs->control);
+}
+
+static void davinci_mdio_enable_manual_mode(struct davinci_mdio_data *data)
+{
+	u32 reg;
+	/* set manual mode */
+	reg = readl(&data->regs->poll);
+	reg |= MDIO_MANUALMODE;
+	writel(reg, &data->regs->poll);
+
+	data->mdio_manualif = readl(&data->regs->manualif);
+}
+
 static void davinci_mdio_enable(struct davinci_mdio_data *data)
 {
 	/* set enable and clock divider */
 	writel(data->clk_div | CONTROL_ENABLE, &data->regs->control);
 }
 
+static void davinci_mdio_sw_set_bit(struct davinci_mdio_data *data,
+				    enum davinci_mdio_manual bit)
+{
+	u32 man_reg;
+
+	switch (bit) {
+	case MDIO_OE:
+		data->mdio_manualif |= MDIO_MAN_OE;
+		writel(data->mdio_manualif, &data->regs->manualif);
+		break;
+	case MDIO_PIN:
+		data->mdio_manualif |= MDIO_MAN_PIN;
+		writel(data->mdio_manualif, &data->regs->manualif);
+		break;
+	case MDIO_MDCLK:
+		man_reg = readl(&data->regs->manualif);
+		man_reg |= MDIO_MAN_MDCLK_O;
+		writel(man_reg, &data->regs->manualif);
+		data->mdio_manualif = readl(&data->regs->manualif);
+		break;
+	default:
+		break;
+	};
+}
+
+static void davinci_mdio_sw_clr_bit(struct davinci_mdio_data *data,
+				    enum davinci_mdio_manual bit)
+{
+	u32 man_reg;
+
+	switch (bit) {
+	case MDIO_OE:
+		data->mdio_manualif &= ~MDIO_MAN_OE;
+		writel(data->mdio_manualif, &data->regs->manualif);
+		break;
+	case MDIO_PIN:
+		data->mdio_manualif &= ~MDIO_MAN_PIN;
+		writel(data->mdio_manualif, &data->regs->manualif);
+		break;
+	case MDIO_MDCLK:
+		man_reg = readl(&data->regs->manualif);
+		man_reg &= ~MDIO_MAN_MDCLK_O;
+		writel(man_reg, &data->regs->manualif);
+		data->mdio_manualif = readl(&data->regs->manualif);
+		break;
+	default:
+		break;
+	};
+}
+
+static int davinci_mdio_test_man_bit(struct davinci_mdio_data *data,
+				     enum davinci_mdio_manual bit)
+{
+	unsigned long reg;
+
+	reg = readl(&data->regs->manualif);
+	return test_bit(bit, &reg);
+}
+
+static void davinci_mdio_toggle_man_bit(struct davinci_mdio_data *data,
+					enum davinci_mdio_manual bit)
+{
+	davinci_mdio_sw_clr_bit(data, bit);
+	davinci_mdio_sw_set_bit(data, bit);
+}
+
+static void davinci_mdio_man_send_pattern(struct davinci_mdio_data *data,
+					  u32 bitrange, u32 val)
+{
+	u32 i;
+
+	for (i = bitrange; i; i = i >> 1) {
+		if (i & val)
+			davinci_mdio_sw_set_bit(data, MDIO_PIN);
+		else
+			davinci_mdio_sw_clr_bit(data, MDIO_PIN);
+
+		davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+	}
+}
+
+static void davinci_mdio_sw_preamble(struct davinci_mdio_data *data)
+{
+	u32 i;
+
+	davinci_mdio_sw_clr_bit(data, MDIO_OE);
+
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
+
+	for (i = 0; i < 32; i++) {
+		davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+		davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+		davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+		davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+	}
+}
+
+static int davinci_mdio_sw_read(struct mii_bus *bus, int phy_id, int phy_reg)
+{
+	struct davinci_mdio_data *data = bus->priv;
+	u32 reg, i;
+	int ret;
+	u8 ack;
+
+	if (phy_reg & ~PHY_REG_MASK || phy_id & ~PHY_ID_MASK)
+		return -EINVAL;
+
+	ret = pm_runtime_get_sync(data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(data->dev);
+		return ret;
+	}
+
+	davinci_mdio_disable(data);
+	davinci_mdio_enable_manual_mode(data);
+	davinci_mdio_sw_preamble(data);
+
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_set_bit(data, MDIO_OE);
+
+	 /* Issue clause 22 MII read function {0,1,1,0} */
+	davinci_mdio_man_send_pattern(data, C22_BITRANGE, C22_READ_PATTERN);
+
+	/* Send the device number MSB first */
+	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_id);
+
+	/* Send the register number MSB first */
+	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_reg);
+
+	/* Send turn around cycles */
+	davinci_mdio_sw_clr_bit(data, MDIO_OE);
+
+	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+
+	ack = davinci_mdio_test_man_bit(data, MDIO_PIN);
+	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+
+	reg = 0;
+	if (ack == 0) {
+		for (i = MDIO_BITRANGE; i; i = i >> 1) {
+			if (davinci_mdio_test_man_bit(data, MDIO_PIN))
+				reg |= i;
+
+			davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+		}
+	} else {
+		for (i = MDIO_BITRANGE; i; i = i >> 1)
+			davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+
+		reg = 0xFFFF;
+	}
+
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_set_bit(data, MDIO_MDCLK);
+	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+
+	pm_runtime_mark_last_busy(data->dev);
+	pm_runtime_put_autosuspend(data->dev);
+
+	return reg;
+}
+
+static int davinci_mdio_sw_write(struct mii_bus *bus, int phy_id,
+				 int phy_reg, u16 phy_data)
+{
+	struct davinci_mdio_data *data = bus->priv;
+	int ret;
+
+	if ((phy_reg & ~PHY_REG_MASK) || (phy_id & ~PHY_ID_MASK))
+		return -EINVAL;
+
+	ret = pm_runtime_get_sync(data->dev);
+	if (ret < 0) {
+		pm_runtime_put_noidle(data->dev);
+		return ret;
+	}
+
+	davinci_mdio_disable(data);
+	davinci_mdio_enable_manual_mode(data);
+	davinci_mdio_sw_preamble(data);
+
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_set_bit(data, MDIO_OE);
+
+	/* Issue clause 22 MII write function {0,1,0,1} */
+	davinci_mdio_man_send_pattern(data, C22_BITRANGE, C22_WRITE_PATTERN);
+
+	/* Send the device number MSB first */
+	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_id);
+
+	/* Send the register number MSB first */
+	davinci_mdio_man_send_pattern(data, PHY_BITRANGE, phy_reg);
+
+	/* set turn-around cycles */
+	davinci_mdio_sw_set_bit(data, MDIO_PIN);
+	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_clr_bit(data, MDIO_PIN);
+	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+
+	/* Send Register data MSB first */
+	davinci_mdio_man_send_pattern(data, PHY_DATA_BITRANGE, phy_data);
+	davinci_mdio_sw_clr_bit(data, MDIO_OE);
+
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_sw_clr_bit(data, MDIO_MDCLK);
+	davinci_mdio_toggle_man_bit(data, MDIO_MDCLK);
+
+	pm_runtime_mark_last_busy(data->dev);
+	pm_runtime_put_autosuspend(data->dev);
+
+	ret = 0;
+
+	return ret;
+}
+
 static int davinci_mdio_reset(struct mii_bus *bus)
 {
 	struct davinci_mdio_data *data = bus->priv;
@@ -138,6 +407,12 @@  static int davinci_mdio_reset(struct mii_bus *bus)
 	if (ret < 0)
 		return ret;
 
+	if (data->manual_mode) {
+		davinci_mdio_disable(data);
+		davinci_mdio_enable_manual_mode(data);
+		davinci_mdio_sw_preamble(data);
+	}
+
 	/* wait for scan logic to settle */
 	msleep(PHY_MAX_ADDR * data->access_time);
 
@@ -319,6 +594,28 @@  static int davinci_mdio_probe_dt(struct mdio_platform_data *data,
 }
 
 #if IS_ENABLED(CONFIG_OF)
+struct k3_mdio_soc_data {
+	bool manual_mode;
+};
+
+static const struct k3_mdio_soc_data am65_mdio_soc_data = {
+	.manual_mode = true,
+};
+
+static const struct soc_device_attribute k3_mdio_socinfo[] = {
+	{ .family = "AM62X", .revision = "SR1.0", .data = &am65_mdio_soc_data },
+	{ .family = "AM64X", .revision = "SR1.0", .data = &am65_mdio_soc_data },
+	{ .family = "AM64X", .revision = "SR2.0", .data = &am65_mdio_soc_data },
+	{ .family = "AM65X", .revision = "SR1.0", .data = &am65_mdio_soc_data },
+	{ .family = "AM65X", .revision = "SR2.0", .data = &am65_mdio_soc_data },
+	{ .family = "J7200", .revision = "SR1.0", .data = &am65_mdio_soc_data },
+	{ .family = "J7200", .revision = "SR2.0", .data = &am65_mdio_soc_data },
+	{ .family = "J721E", .revision = "SR1.0", .data = &am65_mdio_soc_data },
+	{ .family = "J721E", .revision = "SR2.0", .data = &am65_mdio_soc_data },
+	{ .family = "J721S2", .revision = "SR1.0", .data = &am65_mdio_soc_data },
+	{ /* sentinel */ },
+};
+
 static const struct davinci_mdio_of_param of_cpsw_mdio_data = {
 	.autosuspend_delay_ms = 100,
 };
@@ -340,6 +637,7 @@  static int davinci_mdio_probe(struct platform_device *pdev)
 	struct phy_device *phy;
 	int ret, addr;
 	int autosuspend_delay_ms = -1;
+	const struct soc_device_attribute *soc_match_data;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -351,6 +649,8 @@  static int davinci_mdio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	data->manual_mode = false;
+
 	if (IS_ENABLED(CONFIG_OF) && dev->of_node) {
 		const struct davinci_mdio_of_param *of_mdio_data;
 
@@ -364,6 +664,15 @@  static int davinci_mdio_probe(struct platform_device *pdev)
 			autosuspend_delay_ms =
 					of_mdio_data->autosuspend_delay_ms;
 		}
+
+		soc_match_data = soc_device_match(k3_mdio_socinfo);
+		if (soc_match_data && soc_match_data->data) {
+			const struct k3_mdio_soc_data *socdata =
+						soc_match_data->data;
+
+			data->manual_mode = socdata->manual_mode;
+		}
+
 	} else {
 		data->pdata = pdata ? (*pdata) : default_pdata;
 		snprintf(data->bus->id, MII_BUS_ID_SIZE, "%s-%x",
@@ -371,8 +680,16 @@  static int davinci_mdio_probe(struct platform_device *pdev)
 	}
 
 	data->bus->name		= dev_name(dev);
-	data->bus->read		= davinci_mdio_read;
-	data->bus->write	= davinci_mdio_write;
+
+	if (data->manual_mode) {
+		data->bus->read		= davinci_mdio_sw_read;
+		data->bus->write	= davinci_mdio_sw_write;
+		dev_info(dev, "Configuring MDIO in manual mode\n");
+	} else {
+		data->bus->read		= davinci_mdio_read;
+		data->bus->write	= davinci_mdio_write;
+	}
+
 	data->bus->reset	= davinci_mdio_reset;
 	data->bus->parent	= dev;
 	data->bus->priv		= data;
@@ -452,7 +769,9 @@  static int davinci_mdio_runtime_suspend(struct device *dev)
 	ctrl = readl(&data->regs->control);
 	ctrl &= ~CONTROL_ENABLE;
 	writel(ctrl, &data->regs->control);
-	wait_for_idle(data);
+
+	if (!data->manual_mode)
+		wait_for_idle(data);
 
 	return 0;
 }
@@ -461,7 +780,14 @@  static int davinci_mdio_runtime_resume(struct device *dev)
 {
 	struct davinci_mdio_data *data = dev_get_drvdata(dev);
 
-	davinci_mdio_enable(data);
+	if (data->manual_mode) {
+		davinci_mdio_disable(data);
+		davinci_mdio_enable_manual_mode(data);
+		davinci_mdio_sw_preamble(data);
+	} else {
+		davinci_mdio_enable(data);
+	}
+
 	return 0;
 }
 #endif