diff mbox series

[RFC,v3,net-next,05/10] dt-bindings: net: dsa: rzn1-a5psw: add missing CPU port phy-mode to example

Message ID 20220806141059.2498226-6-vladimir.oltean@nxp.com (mailing list archive)
State Superseded
Delegated to: Geert Uytterhoeven
Headers show
Series Validate OF nodes for DSA shared ports | expand

Commit Message

Vladimir Oltean Aug. 6, 2022, 2:10 p.m. UTC 
To prevent warnings during "make dt_bindings_check" after dsa-port.yaml
will make phylink properties mandatory, add phy-mode = "internal" to the
example.

This new property is taken straight out of the SoC dtsi at
arch/arm/boot/dts/r9a06g032.dtsi, so it seems likely that only the
example needs to be fixed, rather than DT blobs in circulation.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
v2->v3: patch is new

 .../devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml         | 2 ++
 1 file changed, 2 insertions(+)

Comments

Rob Herring (Arm) Aug. 9, 2022, 8:11 p.m. UTC | #1 
On Sat, 06 Aug 2022 17:10:54 +0300, Vladimir Oltean wrote:
> To prevent warnings during "make dt_bindings_check" after dsa-port.yaml
> will make phylink properties mandatory, add phy-mode = "internal" to the
> example.
> 
> This new property is taken straight out of the SoC dtsi at
> arch/arm/boot/dts/r9a06g032.dtsi, so it seems likely that only the
> example needs to be fixed, rather than DT blobs in circulation.
> 
> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
> ---
> v2->v3: patch is new
> 
>  .../devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml         | 2 ++
>  1 file changed, 2 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
index 4d428f5ad044..14a1f0b4c32b 100644
--- a/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/renesas,rzn1-a5psw.yaml
@@ -131,6 +131,8 @@  examples:
                 reg = <4>;
                 ethernet = <&gmac2>;
                 label = "cpu";
+                phy-mode = "internal";
+
                 fixed-link {
                   speed = <1000>;
                   full-duplex;