diff mbox series

[3/4] arm64: dts: qcom: c630: Add Embedded Controller node

Message ID 20220810035424.2796777-4-bjorn.andersson@linaro.org (mailing list archive)
State Changes Requested
Headers show
Series arm64: dts: qcom: Lenovo Yoga battery and DP support | expand

Commit Message

Bjorn Andersson Aug. 10, 2022, 3:54 a.m. UTC
The Embedded Controller in the Lenovo Yoga C630 is accessible on &i2c1
and provides battery and adapter status, as well as altmode
notifications for the second USB Type-C port.

Add a definition for the EC.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 35 +++++++++++++++++++
 1 file changed, 35 insertions(+)

Comments

Krzysztof Kozlowski Aug. 10, 2022, 2:53 p.m. UTC | #1
On 10/08/2022 06:54, Bjorn Andersson wrote:
> The Embedded Controller in the Lenovo Yoga C630 is accessible on &i2c1
> and provides battery and adapter status, as well as altmode
> notifications for the second USB Type-C port.
> 
> Add a definition for the EC.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index a7af1bed4312..1b9b36faea27 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -352,6 +352,33 @@  zap-shader {
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
+
+	embedded-controller@70 {
+		compatible = "lenovo,yoga-c630-ec";
+		reg = <0x70>;
+
+		interrupts-extended = <&tlmm 20 IRQ_TYPE_LEVEL_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&ec_int_state>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "source";
+			data-role = "host";
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "source";
+			data-role = "host";
+		};
+	};
 };
 
 &i2c3 {
@@ -676,6 +703,14 @@  mode_pin_active: mode-pin {
 		input-enable;
 		bias-disable;
 	};
+
+	ec_int_state: ec-int-state {
+		pins = "gpio20";
+		function = "gpio";
+
+		input-enable;
+		bias-disable;
+	};
 };
 
 &uart6 {