diff mbox series

[RFC,02/14] drm/qaic: Add uapi and core driver file

Message ID 1660588956-24027-3-git-send-email-quic_jhugo@quicinc.com (mailing list archive)
State New, archived
Headers show
Series QAIC DRM accelerator driver | expand

Commit Message

Jeffrey Hugo Aug. 15, 2022, 6:42 p.m. UTC
Add the QAIC driver uapi file and core driver file that binds to the PCIe
device.  The core driver file also creates the drm device and manages all
the interconnections between the different parts of the driver.

Change-Id: I28854e8a5dacda217439be2f65a4ab67d4dccd1e
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
---
 drivers/gpu/drm/qaic/qaic_drv.c | 825 ++++++++++++++++++++++++++++++++++++++++
 include/uapi/drm/qaic_drm.h     | 283 ++++++++++++++
 2 files changed, 1108 insertions(+)
 create mode 100644 drivers/gpu/drm/qaic/qaic_drv.c
 create mode 100644 include/uapi/drm/qaic_drm.h

Comments

Krzysztof Kozlowski Aug. 16, 2022, 11:06 a.m. UTC | #1
On 15/08/2022 21:42, Jeffrey Hugo wrote:
> Add the QAIC driver uapi file and core driver file that binds to the PCIe
> device.  The core driver file also creates the drm device and manages all
> the interconnections between the different parts of the driver.

Thank you for your patch. There is something to discuss/improve.


> 
> Change-Id: I28854e8a5dacda217439be2f65a4ab67d4dccd1e

This has to go...

(...)


> +static int qaic_pci_probe(struct pci_dev *pdev,
> +			  const struct pci_device_id *id)
> +{
> +	int ret;
> +	int i;
> +	int mhi_irq;
> +	struct qaic_device *qdev;
> +
> +	qdev = kzalloc(sizeof(*qdev), GFP_KERNEL);
> +	if (!qdev) {

return -ENOMEM;

> +		ret = -ENOMEM;
> +		goto qdev_fail;
> +	}
> +
> +	if (id->device == PCI_DEV_AIC100) {
> +		qdev->num_dbc = 16;
> +		qdev->dbc = kcalloc(qdev->num_dbc, sizeof(*qdev->dbc),
> +				    GFP_KERNEL);

Why not devm?

> +		if (!qdev->dbc) {
> +			ret = -ENOMEM;
> +			goto device_id_fail;
> +		}
> +	} else {
> +		pci_dbg(pdev, "%s: No matching device found for device id %d\n",
> +			__func__, id->device);

How this can happen?

> +		ret = -EINVAL;
> +		goto device_id_fail;
> +	}
> +
> +	qdev->cntl_wq = alloc_workqueue("qaic_cntl", WQ_UNBOUND, 0);
> +	if (!qdev->cntl_wq) {
> +		ret = -ENOMEM;
> +		goto wq_fail;
> +	}
> +	qdev->tele_wq = alloc_workqueue("qaic_tele", WQ_UNBOUND, 0);
> +	if (!qdev->tele_wq) {
> +		ret = -ENOMEM;
> +		goto tele_wq_fail;
> +	}
> +	qdev->ssr_wq = alloc_workqueue("qaic_ssr", WQ_UNBOUND, 0);
> +	if (!qdev->ssr_wq) {
> +		ret = -ENOMEM;
> +		goto ssr_wq_fail;
> +	}
> +	pci_set_drvdata(pdev, qdev);
> +	qdev->pdev = pdev;
> +	mutex_init(&qdev->cntl_mutex);
> +	INIT_LIST_HEAD(&qdev->cntl_xfer_list);
> +	init_srcu_struct(&qdev->dev_lock);
> +	mutex_init(&qdev->tele_mutex);
> +	INIT_LIST_HEAD(&qdev->tele_xfer_list);
> +	INIT_LIST_HEAD(&qdev->bootlog);
> +	mutex_init(&qdev->bootlog_mutex);
> +	INIT_LIST_HEAD(&qdev->qaic_drm_devices);
> +	mutex_init(&qdev->qaic_drm_devices_mutex);
> +	for (i = 0; i < qdev->num_dbc; ++i) {
> +		mutex_init(&qdev->dbc[i].handle_lock);
> +		spin_lock_init(&qdev->dbc[i].xfer_lock);
> +		idr_init(&qdev->dbc[i].buf_handles);
> +		qdev->dbc[i].qdev = qdev;
> +		qdev->dbc[i].id = i;
> +		INIT_LIST_HEAD(&qdev->dbc[i].xfer_list);
> +		init_srcu_struct(&qdev->dbc[i].ch_lock);
> +		init_waitqueue_head(&qdev->dbc[i].dbc_release);
> +		INIT_LIST_HEAD(&qdev->dbc[i].bo_lists);
> +	}
> +
> +	qdev->bars = pci_select_bars(pdev, IORESOURCE_MEM);
> +
> +	/* make sure the device has the expected BARs */
> +	if (qdev->bars != (BIT(0) | BIT(2) | BIT(4))) {
> +		pci_dbg(pdev, "%s: expected BARs 0, 2, and 4 not found in device.  Found 0x%x\n",
> +			__func__, qdev->bars);
> +		ret = -EINVAL;
> +		goto bar_fail;
> +	}
> +
> +	ret = pci_enable_device(pdev);
> +	if (ret)
> +		goto enable_fail;
> +
> +	ret = pci_request_selected_regions(pdev, qdev->bars, "aic100");
> +	if (ret)
> +		goto request_regions_fail;
> +
> +	pci_set_master(pdev);
> +
> +	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
> +	if (ret)
> +		goto dma_mask_fail;
> +	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
> +	if (ret)
> +		goto dma_mask_fail;
> +	ret = dma_set_max_seg_size(&pdev->dev, UINT_MAX);
> +	if (ret)
> +		goto dma_mask_fail;
> +
> +	qdev->bar_0 = pci_ioremap_bar(pdev, 0);
> +	if (!qdev->bar_0) {
> +		ret = -ENOMEM;
> +		goto ioremap_0_fail;
> +	}
> +
> +	qdev->bar_2 = pci_ioremap_bar(pdev, 2);
> +	if (!qdev->bar_2) {
> +		ret = -ENOMEM;
> +		goto ioremap_2_fail;
> +	}
> +
> +	for (i = 0; i < qdev->num_dbc; ++i)
> +		qdev->dbc[i].dbc_base = qdev->bar_2 + QAIC_DBC_OFF(i);
> +
> +	ret = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
> +	if (ret < 0)
> +		goto alloc_irq_fail;
> +
> +	if (ret < 32) {
> +		pci_err(pdev, "%s: Requested 32 MSIs.  Obtained %d MSIs which is less than the 32 required.\n",
> +			__func__, ret);
> +		ret = -ENODEV;
> +		goto invalid_msi_config;
> +	}
> +
> +	mhi_irq = pci_irq_vector(pdev, 0);
> +	if (mhi_irq < 0) {
> +		ret = mhi_irq;
> +		goto get_mhi_irq_fail;
> +	}
> +
> +	for (i = 0; i < qdev->num_dbc; ++i) {
> +		ret = devm_request_threaded_irq(&pdev->dev,
> +						pci_irq_vector(pdev, i + 1),
> +						dbc_irq_handler,
> +						dbc_irq_threaded_fn,
> +						IRQF_SHARED,
> +						"qaic_dbc",
> +						&qdev->dbc[i]);
> +		if (ret)
> +			goto get_dbc_irq_failed;
> +
> +		if (poll_datapath) {
> +			qdev->dbc[i].irq = pci_irq_vector(pdev, i + 1);
> +			disable_irq_nosync(qdev->dbc[i].irq);
> +			INIT_WORK(&qdev->dbc[i].poll_work, irq_polling_work);
> +		}
> +	}
> +
> +	qdev->mhi_cntl = qaic_mhi_register_controller(pdev, qdev->bar_0, mhi_irq);
> +	if (IS_ERR(qdev->mhi_cntl)) {
> +		ret = PTR_ERR(qdev->mhi_cntl);
> +		goto mhi_register_fail;
> +	}
> +
> +	return 0;
> +
> +mhi_register_fail:
> +get_dbc_irq_failed:
> +	for (i = 0; i < qdev->num_dbc; ++i)
> +		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
> +			      &qdev->dbc[i]);
> +get_mhi_irq_fail:
> +invalid_msi_config:
> +	pci_free_irq_vectors(pdev);
> +alloc_irq_fail:
> +	iounmap(qdev->bar_2);
> +ioremap_2_fail:
> +	iounmap(qdev->bar_0);
> +ioremap_0_fail:
> +dma_mask_fail:
> +	pci_clear_master(pdev);
> +	pci_release_selected_regions(pdev, qdev->bars);
> +request_regions_fail:
> +	pci_disable_device(pdev);
> +enable_fail:
> +	pci_set_drvdata(pdev, NULL);
> +bar_fail:
> +	for (i = 0; i < qdev->num_dbc; ++i) {
> +		cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
> +		idr_destroy(&qdev->dbc[i].buf_handles);
> +	}
> +	cleanup_srcu_struct(&qdev->dev_lock);
> +	destroy_workqueue(qdev->ssr_wq);
> +ssr_wq_fail:
> +	destroy_workqueue(qdev->tele_wq);
> +tele_wq_fail:
> +	destroy_workqueue(qdev->cntl_wq);
> +wq_fail:
> +	kfree(qdev->dbc);
> +device_id_fail:
> +	kfree(qdev);
> +qdev_fail:
> +	return ret;
> +}
> +
> +static void qaic_pci_remove(struct pci_dev *pdev)
> +{
> +	struct qaic_device *qdev = pci_get_drvdata(pdev);
> +	int i;
> +
> +	if (!qdev)
> +		return;
> +
> +	qaic_dev_reset_clean_local_state(qdev, false);
> +	qaic_mhi_free_controller(qdev->mhi_cntl, link_up);
> +	for (i = 0; i < qdev->num_dbc; ++i) {
> +		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
> +			      &qdev->dbc[i]);
> +		cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
> +		idr_destroy(&qdev->dbc[i].buf_handles);
> +	}
> +	destroy_workqueue(qdev->cntl_wq);
> +	destroy_workqueue(qdev->tele_wq);
> +	destroy_workqueue(qdev->ssr_wq);
> +	pci_free_irq_vectors(pdev);
> +	iounmap(qdev->bar_0);
> +	pci_clear_master(pdev);
> +	pci_release_selected_regions(pdev, qdev->bars);
> +	pci_disable_device(pdev);
> +	pci_set_drvdata(pdev, NULL);
> +	kfree(qdev->dbc);
> +	kfree(qdev);
> +}
> +
> +static void qaic_pci_shutdown(struct pci_dev *pdev)
> +{
> +	link_up = true;
> +	qaic_pci_remove(pdev);
> +}
> +
> +static pci_ers_result_t qaic_pci_error_detected(struct pci_dev *pdev,
> +						pci_channel_state_t error)
> +{
> +	return PCI_ERS_RESULT_NEED_RESET;
> +}
> +
> +static void qaic_pci_reset_prepare(struct pci_dev *pdev)
> +{
> +	struct qaic_device *qdev = pci_get_drvdata(pdev);
> +
> +	qaic_notify_reset(qdev);
> +	qaic_mhi_start_reset(qdev->mhi_cntl);
> +	qaic_dev_reset_clean_local_state(qdev, false);
> +}
> +
> +static void qaic_pci_reset_done(struct pci_dev *pdev)
> +{
> +	struct qaic_device *qdev = pci_get_drvdata(pdev);
> +
> +	qdev->in_reset = false;
> +	qaic_mhi_reset_done(qdev->mhi_cntl);
> +}
> +
> +static const struct mhi_device_id qaic_mhi_match_table[] = {
> +	{ .chan = "QAIC_CONTROL", },
> +	{},
> +};
> +
> +static struct mhi_driver qaic_mhi_driver = {
> +	.id_table = qaic_mhi_match_table,
> +	.remove = qaic_mhi_remove,
> +	.probe = qaic_mhi_probe,
> +	.ul_xfer_cb = qaic_mhi_ul_xfer_cb,
> +	.dl_xfer_cb = qaic_mhi_dl_xfer_cb,
> +	.driver = {
> +		.name = "qaic_mhi",
> +		.owner = THIS_MODULE,

Please run coccinelle/coccicheck and fix the warnings. Usually core sets
THIS_MODULE.

> +	},
> +};
> +
> +static const struct pci_device_id ids[] = {

qaic_ids

> +	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, PCI_DEV_AIC100), },
> +	{ 0, }

Just {}

> +};
> +MODULE_DEVICE_TABLE(pci, ids);
> +
> +static const struct pci_error_handlers qaic_pci_err_handler = {
> +	.error_detected = qaic_pci_error_detected,
> +	.reset_prepare = qaic_pci_reset_prepare,
> +	.reset_done = qaic_pci_reset_done,
> +};
> +
> +static struct pci_driver qaic_pci_driver = {
> +	.name = QAIC_NAME,
> +	.id_table = ids,
> +	.probe = qaic_pci_probe,
> +	.remove = qaic_pci_remove,
> +	.shutdown = qaic_pci_shutdown,
> +	.err_handler = &qaic_pci_err_handler,
> +};
> +
> +static int __init qaic_init(void)
> +{
> +	int ret;
> +
> +	if (datapath_polling) {
> +		poll_datapath = true;
> +		pr_info("qaic: driver initializing in datapath polling mode\n");

No pr() in normal path of init/exit.

> +	}
> +
> +	qaic_logging_register();
> +
> +	ret = mhi_driver_register(&qaic_mhi_driver);
> +	if (ret) {
> +		pr_debug("qaic: mhi_driver_register failed %d\n", ret);
> +		goto free_class;
> +	}
> +
> +	ret = pci_register_driver(&qaic_pci_driver);
> +

No need for such blank lines.

> +	if (ret) {
> +		pr_debug("qaic: pci_register_driver failed %d\n", ret);
> +		goto free_mhi;
> +	}
> +
> +	qaic_telemetry_register();
> +	qaic_ras_register();
> +	qaic_ssr_register();
> +	goto out;

return 0.

> +
> +free_mhi:
> +	mhi_driver_unregister(&qaic_mhi_driver);
> +free_class:
> +out:
> +	if (ret)
> +		qaic_logging_unregister();
> +
> +	return ret;
> +}
> +
> +static void __exit qaic_exit(void)
> +{
> +	pr_debug("qaic: exit\n");

No pr() in normal path of init/exit.

> +	link_up = true;

This is confusing...

> +	pci_unregister_driver(&qaic_pci_driver);
> +	mhi_driver_unregister(&qaic_mhi_driver);
> +	qaic_telemetry_unregister();
> +	qaic_ras_unregister();
> +	qaic_ssr_unregister();

Order of cleanup is usually reverse from init.

> +	qaic_logging_unregister();
> +}
> +
> +module_init(qaic_init);
> +module_exit(qaic_exit);

Best regards,
Krzysztof
Jeffrey Hugo Aug. 16, 2022, 5:47 p.m. UTC | #2
On 8/16/2022 5:06 AM, Krzysztof Kozlowski wrote:
> On 15/08/2022 21:42, Jeffrey Hugo wrote:
>> Add the QAIC driver uapi file and core driver file that binds to the PCIe
>> device.  The core driver file also creates the drm device and manages all
>> the interconnections between the different parts of the driver.
> 
> Thank you for your patch. There is something to discuss/improve.
> 
> 
>>
>> Change-Id: I28854e8a5dacda217439be2f65a4ab67d4dccd1e
> 
> This has to go...
> 

Yep, made this mistake in the entire series.  I have a note to do better 
next time.  It won't be necessary to continue pointing this out for the 
rest of the series.

Since this is RFC and not expected to be merged anyways, I'm hoping it's 
not necessary to respin just to enable further reviews.

> 
>> +static int qaic_pci_probe(struct pci_dev *pdev,
>> +			  const struct pci_device_id *id)
>> +{
>> +	int ret;
>> +	int i;
>> +	int mhi_irq;
>> +	struct qaic_device *qdev;
>> +
>> +	qdev = kzalloc(sizeof(*qdev), GFP_KERNEL);
>> +	if (!qdev) {
> 
> return -ENOMEM;

So, no centralized exit per the coding style?  Ok.

> 
>> +		ret = -ENOMEM;
>> +		goto qdev_fail;
>> +	}
>> +
>> +	if (id->device == PCI_DEV_AIC100) {
>> +		qdev->num_dbc = 16;
>> +		qdev->dbc = kcalloc(qdev->num_dbc, sizeof(*qdev->dbc),
>> +				    GFP_KERNEL);
> 
> Why not devm?

We were having issues with devm and the PCI stuff.  Looking at this 
again, I think we can apply that here.

> 
>> +		if (!qdev->dbc) {
>> +			ret = -ENOMEM;
>> +			goto device_id_fail;
>> +		}
>> +	} else {
>> +		pci_dbg(pdev, "%s: No matching device found for device id %d\n",
>> +			__func__, id->device);
> 
> How this can happen?

Badly functioning hardware.  That hardware has been removed from 
circulation.  Given that this is an init path and not performance 
critical, having this handle the scenario in a sane way instead of 
having the driver blow up in a weird way much later on makes me feel better.

> 
>> +		ret = -EINVAL;
>> +		goto device_id_fail;
>> +	}
>> +
>> +	qdev->cntl_wq = alloc_workqueue("qaic_cntl", WQ_UNBOUND, 0);
>> +	if (!qdev->cntl_wq) {
>> +		ret = -ENOMEM;
>> +		goto wq_fail;
>> +	}
>> +	qdev->tele_wq = alloc_workqueue("qaic_tele", WQ_UNBOUND, 0);
>> +	if (!qdev->tele_wq) {
>> +		ret = -ENOMEM;
>> +		goto tele_wq_fail;
>> +	}
>> +	qdev->ssr_wq = alloc_workqueue("qaic_ssr", WQ_UNBOUND, 0);
>> +	if (!qdev->ssr_wq) {
>> +		ret = -ENOMEM;
>> +		goto ssr_wq_fail;
>> +	}
>> +	pci_set_drvdata(pdev, qdev);
>> +	qdev->pdev = pdev;
>> +	mutex_init(&qdev->cntl_mutex);
>> +	INIT_LIST_HEAD(&qdev->cntl_xfer_list);
>> +	init_srcu_struct(&qdev->dev_lock);
>> +	mutex_init(&qdev->tele_mutex);
>> +	INIT_LIST_HEAD(&qdev->tele_xfer_list);
>> +	INIT_LIST_HEAD(&qdev->bootlog);
>> +	mutex_init(&qdev->bootlog_mutex);
>> +	INIT_LIST_HEAD(&qdev->qaic_drm_devices);
>> +	mutex_init(&qdev->qaic_drm_devices_mutex);
>> +	for (i = 0; i < qdev->num_dbc; ++i) {
>> +		mutex_init(&qdev->dbc[i].handle_lock);
>> +		spin_lock_init(&qdev->dbc[i].xfer_lock);
>> +		idr_init(&qdev->dbc[i].buf_handles);
>> +		qdev->dbc[i].qdev = qdev;
>> +		qdev->dbc[i].id = i;
>> +		INIT_LIST_HEAD(&qdev->dbc[i].xfer_list);
>> +		init_srcu_struct(&qdev->dbc[i].ch_lock);
>> +		init_waitqueue_head(&qdev->dbc[i].dbc_release);
>> +		INIT_LIST_HEAD(&qdev->dbc[i].bo_lists);
>> +	}
>> +
>> +	qdev->bars = pci_select_bars(pdev, IORESOURCE_MEM);
>> +
>> +	/* make sure the device has the expected BARs */
>> +	if (qdev->bars != (BIT(0) | BIT(2) | BIT(4))) {
>> +		pci_dbg(pdev, "%s: expected BARs 0, 2, and 4 not found in device.  Found 0x%x\n",
>> +			__func__, qdev->bars);
>> +		ret = -EINVAL;
>> +		goto bar_fail;
>> +	}
>> +
>> +	ret = pci_enable_device(pdev);
>> +	if (ret)
>> +		goto enable_fail;
>> +
>> +	ret = pci_request_selected_regions(pdev, qdev->bars, "aic100");
>> +	if (ret)
>> +		goto request_regions_fail;
>> +
>> +	pci_set_master(pdev);
>> +
>> +	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
>> +	if (ret)
>> +		goto dma_mask_fail;
>> +	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
>> +	if (ret)
>> +		goto dma_mask_fail;
>> +	ret = dma_set_max_seg_size(&pdev->dev, UINT_MAX);
>> +	if (ret)
>> +		goto dma_mask_fail;
>> +
>> +	qdev->bar_0 = pci_ioremap_bar(pdev, 0);
>> +	if (!qdev->bar_0) {
>> +		ret = -ENOMEM;
>> +		goto ioremap_0_fail;
>> +	}
>> +
>> +	qdev->bar_2 = pci_ioremap_bar(pdev, 2);
>> +	if (!qdev->bar_2) {
>> +		ret = -ENOMEM;
>> +		goto ioremap_2_fail;
>> +	}
>> +
>> +	for (i = 0; i < qdev->num_dbc; ++i)
>> +		qdev->dbc[i].dbc_base = qdev->bar_2 + QAIC_DBC_OFF(i);
>> +
>> +	ret = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
>> +	if (ret < 0)
>> +		goto alloc_irq_fail;
>> +
>> +	if (ret < 32) {
>> +		pci_err(pdev, "%s: Requested 32 MSIs.  Obtained %d MSIs which is less than the 32 required.\n",
>> +			__func__, ret);
>> +		ret = -ENODEV;
>> +		goto invalid_msi_config;
>> +	}
>> +
>> +	mhi_irq = pci_irq_vector(pdev, 0);
>> +	if (mhi_irq < 0) {
>> +		ret = mhi_irq;
>> +		goto get_mhi_irq_fail;
>> +	}
>> +
>> +	for (i = 0; i < qdev->num_dbc; ++i) {
>> +		ret = devm_request_threaded_irq(&pdev->dev,
>> +						pci_irq_vector(pdev, i + 1),
>> +						dbc_irq_handler,
>> +						dbc_irq_threaded_fn,
>> +						IRQF_SHARED,
>> +						"qaic_dbc",
>> +						&qdev->dbc[i]);
>> +		if (ret)
>> +			goto get_dbc_irq_failed;
>> +
>> +		if (poll_datapath) {
>> +			qdev->dbc[i].irq = pci_irq_vector(pdev, i + 1);
>> +			disable_irq_nosync(qdev->dbc[i].irq);
>> +			INIT_WORK(&qdev->dbc[i].poll_work, irq_polling_work);
>> +		}
>> +	}
>> +
>> +	qdev->mhi_cntl = qaic_mhi_register_controller(pdev, qdev->bar_0, mhi_irq);
>> +	if (IS_ERR(qdev->mhi_cntl)) {
>> +		ret = PTR_ERR(qdev->mhi_cntl);
>> +		goto mhi_register_fail;
>> +	}
>> +
>> +	return 0;
>> +
>> +mhi_register_fail:
>> +get_dbc_irq_failed:
>> +	for (i = 0; i < qdev->num_dbc; ++i)
>> +		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
>> +			      &qdev->dbc[i]);
>> +get_mhi_irq_fail:
>> +invalid_msi_config:
>> +	pci_free_irq_vectors(pdev);
>> +alloc_irq_fail:
>> +	iounmap(qdev->bar_2);
>> +ioremap_2_fail:
>> +	iounmap(qdev->bar_0);
>> +ioremap_0_fail:
>> +dma_mask_fail:
>> +	pci_clear_master(pdev);
>> +	pci_release_selected_regions(pdev, qdev->bars);
>> +request_regions_fail:
>> +	pci_disable_device(pdev);
>> +enable_fail:
>> +	pci_set_drvdata(pdev, NULL);
>> +bar_fail:
>> +	for (i = 0; i < qdev->num_dbc; ++i) {
>> +		cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
>> +		idr_destroy(&qdev->dbc[i].buf_handles);
>> +	}
>> +	cleanup_srcu_struct(&qdev->dev_lock);
>> +	destroy_workqueue(qdev->ssr_wq);
>> +ssr_wq_fail:
>> +	destroy_workqueue(qdev->tele_wq);
>> +tele_wq_fail:
>> +	destroy_workqueue(qdev->cntl_wq);
>> +wq_fail:
>> +	kfree(qdev->dbc);
>> +device_id_fail:
>> +	kfree(qdev);
>> +qdev_fail:
>> +	return ret;
>> +}
>> +
>> +static void qaic_pci_remove(struct pci_dev *pdev)
>> +{
>> +	struct qaic_device *qdev = pci_get_drvdata(pdev);
>> +	int i;
>> +
>> +	if (!qdev)
>> +		return;
>> +
>> +	qaic_dev_reset_clean_local_state(qdev, false);
>> +	qaic_mhi_free_controller(qdev->mhi_cntl, link_up);
>> +	for (i = 0; i < qdev->num_dbc; ++i) {
>> +		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
>> +			      &qdev->dbc[i]);
>> +		cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
>> +		idr_destroy(&qdev->dbc[i].buf_handles);
>> +	}
>> +	destroy_workqueue(qdev->cntl_wq);
>> +	destroy_workqueue(qdev->tele_wq);
>> +	destroy_workqueue(qdev->ssr_wq);
>> +	pci_free_irq_vectors(pdev);
>> +	iounmap(qdev->bar_0);
>> +	pci_clear_master(pdev);
>> +	pci_release_selected_regions(pdev, qdev->bars);
>> +	pci_disable_device(pdev);
>> +	pci_set_drvdata(pdev, NULL);
>> +	kfree(qdev->dbc);
>> +	kfree(qdev);
>> +}
>> +
>> +static void qaic_pci_shutdown(struct pci_dev *pdev)
>> +{
>> +	link_up = true;
>> +	qaic_pci_remove(pdev);
>> +}
>> +
>> +static pci_ers_result_t qaic_pci_error_detected(struct pci_dev *pdev,
>> +						pci_channel_state_t error)
>> +{
>> +	return PCI_ERS_RESULT_NEED_RESET;
>> +}
>> +
>> +static void qaic_pci_reset_prepare(struct pci_dev *pdev)
>> +{
>> +	struct qaic_device *qdev = pci_get_drvdata(pdev);
>> +
>> +	qaic_notify_reset(qdev);
>> +	qaic_mhi_start_reset(qdev->mhi_cntl);
>> +	qaic_dev_reset_clean_local_state(qdev, false);
>> +}
>> +
>> +static void qaic_pci_reset_done(struct pci_dev *pdev)
>> +{
>> +	struct qaic_device *qdev = pci_get_drvdata(pdev);
>> +
>> +	qdev->in_reset = false;
>> +	qaic_mhi_reset_done(qdev->mhi_cntl);
>> +}
>> +
>> +static const struct mhi_device_id qaic_mhi_match_table[] = {
>> +	{ .chan = "QAIC_CONTROL", },
>> +	{},
>> +};
>> +
>> +static struct mhi_driver qaic_mhi_driver = {
>> +	.id_table = qaic_mhi_match_table,
>> +	.remove = qaic_mhi_remove,
>> +	.probe = qaic_mhi_probe,
>> +	.ul_xfer_cb = qaic_mhi_ul_xfer_cb,
>> +	.dl_xfer_cb = qaic_mhi_dl_xfer_cb,
>> +	.driver = {
>> +		.name = "qaic_mhi",
>> +		.owner = THIS_MODULE,
> 
> Please run coccinelle/coccicheck and fix the warnings. Usually core sets
> THIS_MODULE.

Ah, thats right.  Legacy compatibility that should not be here.

> 
>> +	},
>> +};
>> +
>> +static const struct pci_device_id ids[] = {
> 
> qaic_ids

Fair.

> 
>> +	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, PCI_DEV_AIC100), },
>> +	{ 0, }
> 
> Just {}

Fair.

> 
>> +};
>> +MODULE_DEVICE_TABLE(pci, ids);
>> +
>> +static const struct pci_error_handlers qaic_pci_err_handler = {
>> +	.error_detected = qaic_pci_error_detected,
>> +	.reset_prepare = qaic_pci_reset_prepare,
>> +	.reset_done = qaic_pci_reset_done,
>> +};
>> +
>> +static struct pci_driver qaic_pci_driver = {
>> +	.name = QAIC_NAME,
>> +	.id_table = ids,
>> +	.probe = qaic_pci_probe,
>> +	.remove = qaic_pci_remove,
>> +	.shutdown = qaic_pci_shutdown,
>> +	.err_handler = &qaic_pci_err_handler,
>> +};
>> +
>> +static int __init qaic_init(void)
>> +{
>> +	int ret;
>> +
>> +	if (datapath_polling) {
>> +		poll_datapath = true;
>> +		pr_info("qaic: driver initializing in datapath polling mode\n");
> 
> No pr() in normal path of init/exit.

This is not the normal path.  datapath_polling is a module parameter. 
This is something the user can enable, and so it would be good to have 
the user informed that the option took effect.

> 
>> +	}
>> +
>> +	qaic_logging_register();
>> +
>> +	ret = mhi_driver_register(&qaic_mhi_driver);
>> +	if (ret) {
>> +		pr_debug("qaic: mhi_driver_register failed %d\n", ret);
>> +		goto free_class;
>> +	}
>> +
>> +	ret = pci_register_driver(&qaic_pci_driver);
>> +
> 
> No need for such blank lines.

Agreed.

> 
>> +	if (ret) {
>> +		pr_debug("qaic: pci_register_driver failed %d\n", ret);
>> +		goto free_mhi;
>> +	}
>> +
>> +	qaic_telemetry_register();
>> +	qaic_ras_register();
>> +	qaic_ssr_register();
>> +	goto out;
> 
> return 0.

Ok.

> 
>> +
>> +free_mhi:
>> +	mhi_driver_unregister(&qaic_mhi_driver);
>> +free_class:
>> +out:
>> +	if (ret)
>> +		qaic_logging_unregister();
>> +
>> +	return ret;
>> +}
>> +
>> +static void __exit qaic_exit(void)
>> +{
>> +	pr_debug("qaic: exit\n");
> 
> No pr() in normal path of init/exit.

Sure.

> 
>> +	link_up = true;
> 
> This is confusing...

Will add a comment.  This ties into MHI, and how it can tear down in two 
different ways, usually based on the link state.

In this case, we are doing a clean tear down where the link is still up, 
and so we should have MHI do the extra tear down that leaves the device 
in a good state, in the event the driver gets added again.

> 
>> +	pci_unregister_driver(&qaic_pci_driver);
>> +	mhi_driver_unregister(&qaic_mhi_driver);
>> +	qaic_telemetry_unregister();
>> +	qaic_ras_unregister();
>> +	qaic_ssr_unregister();
> 
> Order of cleanup is usually reverse from init.

Fair.

> 
>> +	qaic_logging_unregister();
>> +}
>> +
>> +module_init(qaic_init);
>> +module_exit(qaic_exit);
> 
> Best regards,
> Krzysztof
Krzysztof Kozlowski Aug. 16, 2022, 6 p.m. UTC | #3
On 16/08/2022 20:47, Jeffrey Hugo wrote:
>>> +static int qaic_pci_probe(struct pci_dev *pdev,
>>> +			  const struct pci_device_id *id)
>>> +{
>>> +	int ret;
>>> +	int i;
>>> +	int mhi_irq;
>>> +	struct qaic_device *qdev;
>>> +
>>> +	qdev = kzalloc(sizeof(*qdev), GFP_KERNEL);
>>> +	if (!qdev) {
>>
>> return -ENOMEM;
> 
> So, no centralized exit per the coding style?  Ok.

Centralized exit except for cases where it is simply return.

> 
>>
>>> +		ret = -ENOMEM;
>>> +		goto qdev_fail;
>>> +	}
>>> +
>>> +	if (id->device == PCI_DEV_AIC100) {
>>> +		qdev->num_dbc = 16;
>>> +		qdev->dbc = kcalloc(qdev->num_dbc, sizeof(*qdev->dbc),
>>> +				    GFP_KERNEL);
>>
>> Why not devm?
> 
> We were having issues with devm and the PCI stuff.  Looking at this 
> again, I think we can apply that here.
> 
>>
>>> +		if (!qdev->dbc) {
>>> +			ret = -ENOMEM;
>>> +			goto device_id_fail;
>>> +		}
>>> +	} else {
>>> +		pci_dbg(pdev, "%s: No matching device found for device id %d\n",
>>> +			__func__, id->device);
>>
>> How this can happen?
> 
> Badly functioning hardware.  That hardware has been removed from 
> circulation.  Given that this is an init path and not performance 
> critical, having this handle the scenario in a sane way instead of 
> having the driver blow up in a weird way much later on makes me feel better.

How badly functioning hardware can bind and then report some different
ID? If it reports different ID, it cannot bind...

(...)

>>> +static int __init qaic_init(void)
>>> +{
>>> +	int ret;
>>> +
>>> +	if (datapath_polling) {
>>> +		poll_datapath = true;
>>> +		pr_info("qaic: driver initializing in datapath polling mode\n");
>>
>> No pr() in normal path of init/exit.
> 
> This is not the normal path.  datapath_polling is a module parameter. 
> This is something the user can enable, and so it would be good to have 
> the user informed that the option took effect.

No, not really. User always can check via sysfs and there is no point in
polluting dmesg on module load. It might be printed (if someone has such
modprobe setting) on every system, even without the actual device.

> 
>>
>>> +	}
>>> +
>>> +	qaic_logging_register();
>>> +
>>> +	ret = mhi_driver_register(&qaic_mhi_driver);
>>> +	if (ret) {
>>> +		pr_debug("qaic: mhi_driver_register failed %d\n", ret);
>>> +		goto free_class;
>>> +	}
>>> +
>>> +	ret = pci_register_driver(&qaic_pci_driver);
>>> +
>>
>> No need for such blank lines.
> 
> Agreed.
> 
>>
>>> +	if (ret) {
>>> +		pr_debug("qaic: pci_register_driver failed %d\n", ret);
>>> +		goto free_mhi;
>>> +	}
>>> +
>>> +	qaic_telemetry_register();
>>> +	qaic_ras_register();
>>> +	qaic_ssr_register();
>>> +	goto out;
>>
>> return 0.
> 
> Ok.
> 
>>
>>> +
>>> +free_mhi:
>>> +	mhi_driver_unregister(&qaic_mhi_driver);
>>> +free_class:
>>> +out:
>>> +	if (ret)
>>> +		qaic_logging_unregister();
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static void __exit qaic_exit(void)
>>> +{
>>> +	pr_debug("qaic: exit\n");
>>
>> No pr() in normal path of init/exit.
> 
> Sure.
> 
>>
>>> +	link_up = true;
>>
>> This is confusing...
> 
> Will add a comment.  This ties into MHI, and how it can tear down in two 
> different ways, usually based on the link state.

Shouldn't this be link_up=false?

> 
> In this case, we are doing a clean tear down where the link is still up, 
> and so we should have MHI do the extra tear down that leaves the device 
> in a good state, in the event the driver gets added again.
> 
>>



Best regards,
Krzysztof
Jeffrey Hugo Aug. 16, 2022, 6:22 p.m. UTC | #4
On 8/16/2022 12:00 PM, Krzysztof Kozlowski wrote:
> On 16/08/2022 20:47, Jeffrey Hugo wrote:
>>>> +static int qaic_pci_probe(struct pci_dev *pdev,
>>>> +			  const struct pci_device_id *id)
>>>> +{
>>>> +	int ret;
>>>> +	int i;
>>>> +	int mhi_irq;
>>>> +	struct qaic_device *qdev;
>>>> +
>>>> +	qdev = kzalloc(sizeof(*qdev), GFP_KERNEL);
>>>> +	if (!qdev) {
>>>
>>> return -ENOMEM;
>>
>> So, no centralized exit per the coding style?  Ok.
> 
> Centralized exit except for cases where it is simply return. >
>>
>>>
>>>> +		ret = -ENOMEM;
>>>> +		goto qdev_fail;
>>>> +	}
>>>> +
>>>> +	if (id->device == PCI_DEV_AIC100) {
>>>> +		qdev->num_dbc = 16;
>>>> +		qdev->dbc = kcalloc(qdev->num_dbc, sizeof(*qdev->dbc),
>>>> +				    GFP_KERNEL);
>>>
>>> Why not devm?
>>
>> We were having issues with devm and the PCI stuff.  Looking at this
>> again, I think we can apply that here.
>>
>>>
>>>> +		if (!qdev->dbc) {
>>>> +			ret = -ENOMEM;
>>>> +			goto device_id_fail;
>>>> +		}
>>>> +	} else {
>>>> +		pci_dbg(pdev, "%s: No matching device found for device id %d\n",
>>>> +			__func__, id->device);
>>>
>>> How this can happen?
>>
>> Badly functioning hardware.  That hardware has been removed from
>> circulation.  Given that this is an init path and not performance
>> critical, having this handle the scenario in a sane way instead of
>> having the driver blow up in a weird way much later on makes me feel better.
> 
> How badly functioning hardware can bind and then report some different
> ID? If it reports different ID, it cannot bind...

It was one of those issues that was painful enough that I still remember 
it occurring, but long ago enough that I don't remember the specifics.

I don't think I'll be able to recreate the issue to re-debug it, so I'll 
just remove this.

>>>> +static int __init qaic_init(void)
>>>> +{
>>>> +	int ret;
>>>> +
>>>> +	if (datapath_polling) {
>>>> +		poll_datapath = true;
>>>> +		pr_info("qaic: driver initializing in datapath polling mode\n");
>>>
>>> No pr() in normal path of init/exit.
>>
>> This is not the normal path.  datapath_polling is a module parameter.
>> This is something the user can enable, and so it would be good to have
>> the user informed that the option took effect.
> 
> No, not really. User always can check via sysfs and there is no point in
> polluting dmesg on module load. It might be printed (if someone has such
> modprobe setting) on every system, even without the actual device.

So, I guess this is limited to platform devices?
I see GIC, IOMMU, and PCI doing the same
I guess, will remove.

> 
>>
>>>
>>>> +	}
>>>> +
>>>> +	qaic_logging_register();
>>>> +
>>>> +	ret = mhi_driver_register(&qaic_mhi_driver);
>>>> +	if (ret) {
>>>> +		pr_debug("qaic: mhi_driver_register failed %d\n", ret);
>>>> +		goto free_class;
>>>> +	}
>>>> +
>>>> +	ret = pci_register_driver(&qaic_pci_driver);
>>>> +
>>>
>>> No need for such blank lines.
>>
>> Agreed.
>>
>>>
>>>> +	if (ret) {
>>>> +		pr_debug("qaic: pci_register_driver failed %d\n", ret);
>>>> +		goto free_mhi;
>>>> +	}
>>>> +
>>>> +	qaic_telemetry_register();
>>>> +	qaic_ras_register();
>>>> +	qaic_ssr_register();
>>>> +	goto out;
>>>
>>> return 0.
>>
>> Ok.
>>
>>>
>>>> +
>>>> +free_mhi:
>>>> +	mhi_driver_unregister(&qaic_mhi_driver);
>>>> +free_class:
>>>> +out:
>>>> +	if (ret)
>>>> +		qaic_logging_unregister();
>>>> +
>>>> +	return ret;
>>>> +}
>>>> +
>>>> +static void __exit qaic_exit(void)
>>>> +{
>>>> +	pr_debug("qaic: exit\n");
>>>
>>> No pr() in normal path of init/exit.
>>
>> Sure.
>>
>>>
>>>> +	link_up = true;
>>>
>>> This is confusing...
>>
>> Will add a comment.  This ties into MHI, and how it can tear down in two
>> different ways, usually based on the link state.
> 
> Shouldn't this be link_up=false?

No.  module_exit() will be triggered on rmmod.  exit() will unregister 
the driver, which will cause qaic_pci_remove() to be called.  remove() 
calls qaic_mhi_free_controller() which uses the link state.

However, a hotplug event will also trigger qaic_pci_remove().

rmmod - link is up
hotplug - link is down

>> In this case, we are doing a clean tear down where the link is still up,
>> and so we should have MHI do the extra tear down that leaves the device
>> in a good state, in the event the driver gets added again.
>>
>>>
> 
> 
> 
> Best regards,
> Krzysztof
Krzysztof Kozlowski Aug. 17, 2022, 5:38 a.m. UTC | #5
On 16/08/2022 21:22, Jeffrey Hugo wrote:
>>>>> +	if (datapath_polling) {
>>>>> +		poll_datapath = true;
>>>>> +		pr_info("qaic: driver initializing in datapath polling mode\n");
>>>>
>>>> No pr() in normal path of init/exit.
>>>
>>> This is not the normal path.  datapath_polling is a module parameter.
>>> This is something the user can enable, and so it would be good to have
>>> the user informed that the option took effect.
>>
>> No, not really. User always can check via sysfs and there is no point in
>> polluting dmesg on module load. It might be printed (if someone has such
>> modprobe setting) on every system, even without the actual device.
> 
> So, I guess this is limited to platform devices?
> I see GIC, IOMMU, and PCI doing the same
> I guess, will remove.

None of regular drivers should print anything during init/exit. If one
is printing, I think a patch removing it will be accepted.

However you mention platform devices, so a "device" implies probe, not
init. This is a different case.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/drivers/gpu/drm/qaic/qaic_drv.c b/drivers/gpu/drm/qaic/qaic_drv.c
new file mode 100644
index 0000000..0e139e6
--- /dev/null
+++ b/drivers/gpu/drm/qaic/qaic_drv.c
@@ -0,0 +1,825 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */
+/* Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved. */
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/idr.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/kref.h>
+#include <linux/mhi.h>
+#include <linux/module.h>
+#include <linux/msi.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/wait.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_file.h>
+#include <drm/drm_gem.h>
+#include <drm/drm_ioctl.h>
+#include <uapi/drm/qaic_drm.h>
+
+#include "mhi_controller.h"
+#include "qaic.h"
+#include "qaic_debugfs.h"
+#include "qaic_ras.h"
+#include "qaic_ssr.h"
+#include "qaic_telemetry.h"
+#define CREATE_TRACE_POINTS
+#include "qaic_trace.h"
+
+MODULE_IMPORT_NS(DMA_BUF);
+
+#define PCI_DEV_AIC100			0xa100
+#define QAIC_NAME			"qaic"
+#define STR2(s)				#s
+#define STR(s)				STR2(s)
+#define MAJOR_VER			1
+#define MINOR_VER			0
+#define PATCH_VER			0
+#define QAIC_DESC			"Qualcomm Cloud AI Accelerators"
+
+static unsigned int datapath_polling;
+module_param(datapath_polling, uint, 0400);
+bool poll_datapath;
+
+static u16 cntl_major = 5;
+static u16 cntl_minor;/* 0 */
+static bool link_up;
+
+static int qaic_create_drm_device(struct qaic_device *qdev, s32 partition_id,
+				  struct qaic_user *owner);
+static void qaic_destroy_drm_device(struct qaic_device *qdev, s32 partition_id,
+				    struct qaic_user *owner);
+
+static void free_usr(struct kref *kref)
+{
+	struct qaic_user *usr = container_of(kref, struct qaic_user, ref_count);
+
+	cleanup_srcu_struct(&usr->qddev_lock);
+	kfree(usr);
+}
+
+static int qaic_open(struct drm_device *dev, struct drm_file *file)
+{
+	struct qaic_drm_device *qddev = dev->dev_private;
+	struct qaic_device *qdev = qddev->qdev;
+	struct qaic_user *usr;
+	int rcu_id;
+	int ret;
+
+	rcu_id = srcu_read_lock(&qdev->dev_lock);
+	if (qdev->in_reset) {
+		srcu_read_unlock(&qdev->dev_lock, rcu_id);
+		return -ENODEV;
+	}
+
+	usr = kmalloc(sizeof(*usr), GFP_KERNEL);
+	if (!usr) {
+		srcu_read_unlock(&qdev->dev_lock, rcu_id);
+		return -ENOMEM;
+	}
+
+	usr->handle = current->pid;
+	usr->qddev = qddev;
+	atomic_set(&usr->chunk_id, 0);
+	init_srcu_struct(&usr->qddev_lock);
+	kref_init(&usr->ref_count);
+
+	ret = mutex_lock_interruptible(&qddev->users_mutex);
+	if (ret) {
+		cleanup_srcu_struct(&usr->qddev_lock);
+		kfree(usr);
+		srcu_read_unlock(&qdev->dev_lock, rcu_id);
+		return ret;
+	}
+
+	list_add(&usr->node, &qddev->users);
+	mutex_unlock(&qddev->users_mutex);
+
+	file->driver_priv = usr;
+
+	srcu_read_unlock(&qdev->dev_lock, rcu_id);
+	return 0;
+}
+
+static void qaic_postclose(struct drm_device *dev, struct drm_file *file)
+{
+	struct qaic_user *usr = file->driver_priv;
+	struct qaic_drm_device *qddev;
+	struct qaic_device *qdev;
+	int qdev_rcu_id;
+	int usr_rcu_id;
+	int i;
+
+	qddev = usr->qddev;
+	usr_rcu_id = srcu_read_lock(&usr->qddev_lock);
+	if (qddev) {
+		qdev = qddev->qdev;
+		qdev_rcu_id = srcu_read_lock(&qdev->dev_lock);
+		if (!qdev->in_reset) {
+			qaic_release_usr(qdev, usr);
+			for (i = 0; i < qdev->num_dbc; ++i)
+				if (qdev->dbc[i].usr &&
+				    qdev->dbc[i].usr->handle == usr->handle)
+					release_dbc(qdev, i, true);
+
+			/* Remove child devices */
+			if (qddev->partition_id == QAIC_NO_PARTITION)
+				qaic_destroy_drm_device(qdev, QAIC_NO_PARTITION, usr);
+		}
+		srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id);
+
+		mutex_lock(&qddev->users_mutex);
+		if (!list_empty(&usr->node))
+			list_del_init(&usr->node);
+		mutex_unlock(&qddev->users_mutex);
+	}
+
+	srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
+	kref_put(&usr->ref_count, free_usr);
+
+	file->driver_priv = NULL;
+}
+
+static int qaic_part_dev_ioctl(struct drm_device *dev, void *data,
+			       struct drm_file *file_priv)
+{
+	struct qaic_device *qdev;
+	struct qaic_user *usr;
+	u32 partition_id;
+	int qdev_rcu_id;
+	int usr_rcu_id;
+	int ret = 0;
+	u16 remove;
+
+	usr = file_priv->driver_priv;
+	if (!usr)
+		return -EINVAL;
+
+	usr_rcu_id = srcu_read_lock(&usr->qddev_lock);
+	if (!usr->qddev) {
+		srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
+		return -ENODEV;
+	}
+
+	qdev = usr->qddev->qdev;
+	if (!qdev) {
+		srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
+		return -ENODEV;
+	}
+
+	qdev_rcu_id = srcu_read_lock(&qdev->dev_lock);
+	if (qdev->in_reset) {
+		ret = -ENODEV;
+		goto out;
+	}
+
+	/* This IOCTL is only supported for base devices. */
+	if (usr->qddev->partition_id != QAIC_NO_PARTITION) {
+		ret = -ENOTTY;
+		goto out;
+	}
+
+	ret = qaic_data_get_reservation(qdev, usr, data, &partition_id,
+					&remove);
+	if (ret)
+		goto out;
+
+	if (remove == 1)
+		qaic_destroy_drm_device(qdev, partition_id, usr);
+	else
+		ret = qaic_create_drm_device(qdev, partition_id, usr);
+
+out:
+	srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id);
+	srcu_read_unlock(&usr->qddev_lock, usr_rcu_id);
+
+	return ret;
+}
+
+DEFINE_DRM_GEM_FOPS(qaic_drm_fops);
+
+static const struct drm_ioctl_desc qaic_drm_ioctls[] = {
+	DRM_IOCTL_DEF_DRV(QAIC_MANAGE, qaic_manage_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_CREATE_BO, qaic_create_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_MMAP_BO, qaic_mmap_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_ATTACH_SLICE_BO, qaic_attach_slice_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_EXECUTE_BO, qaic_execute_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_PARTIAL_EXECUTE_BO, qaic_partial_execute_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_WAIT_BO, qaic_wait_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_PERF_STATS_BO, qaic_perf_stats_bo_ioctl, DRM_RENDER_ALLOW),
+	DRM_IOCTL_DEF_DRV(QAIC_PART_DEV, qaic_part_dev_ioctl, DRM_RENDER_ALLOW),
+};
+
+static const struct drm_driver qaic_drm_driver = {
+	.driver_features	= DRIVER_GEM | DRIVER_RENDER,
+
+	.name			= QAIC_NAME,
+	.desc			= QAIC_DESC,
+	.date			= "20190618",
+	.major			= MAJOR_VER,
+	.minor			= MINOR_VER,
+	.patchlevel		= PATCH_VER,
+
+	.fops			= &qaic_drm_fops,
+	.open			= qaic_open,
+	.postclose		= qaic_postclose,
+
+#if defined(CONFIG_DEBUG_FS)
+	.debugfs_init		= qaic_debugfs_init,
+#endif
+
+	.ioctls			= qaic_drm_ioctls,
+	.num_ioctls		= ARRAY_SIZE(qaic_drm_ioctls),
+	.prime_fd_to_handle	= drm_gem_prime_fd_to_handle,
+	.gem_prime_import	= qaic_gem_prime_import,
+};
+
+static int qaic_create_drm_device(struct qaic_device *qdev, s32 partition_id,
+				  struct qaic_user *owner)
+{
+	struct qaic_drm_device *qddev;
+	struct drm_device *ddev;
+	struct device *pdev;
+	int ret;
+
+	/*
+	 * Partition id QAIC_NO_PARTITION indicates that the device was created
+	 * on mhi_probe and id > QAIC_NO_PARTITION indicates a partition
+	 * created using IOCTL. So, pdev for primary device is the pci dev and
+	 * the parent for partition dev is the primary device.
+	 */
+	if (partition_id == QAIC_NO_PARTITION)
+		pdev = &qdev->pdev->dev;
+	else
+		pdev = qdev->base_dev->ddev->dev;
+
+	qddev = kzalloc(sizeof(*qddev), GFP_KERNEL);
+	if (!qddev) {
+		ret = -ENOMEM;
+		goto qddev_fail;
+	}
+
+	ddev = drm_dev_alloc(&qaic_drm_driver, pdev);
+	if (IS_ERR(ddev)) {
+		ret = PTR_ERR(ddev);
+		goto ddev_fail;
+	}
+
+	ddev->dev_private = qddev;
+	qddev->ddev = ddev;
+
+	if (partition_id == QAIC_NO_PARTITION)
+		qdev->base_dev = qddev;
+	qddev->qdev = qdev;
+	qddev->partition_id = partition_id;
+	qddev->owner = owner;
+	INIT_LIST_HEAD(&qddev->users);
+	mutex_init(&qddev->users_mutex);
+
+	mutex_lock(&qdev->qaic_drm_devices_mutex);
+	list_add(&qddev->node, &qdev->qaic_drm_devices);
+	mutex_unlock(&qdev->qaic_drm_devices_mutex);
+
+	ret = qaic_sysfs_init(qddev);
+	if (ret) {
+		pci_dbg(qdev->pdev, "%s: sysfs_init failed %d\n", __func__, ret);
+		goto sysfs_init_fail;
+	}
+
+	ret = drm_dev_register(ddev, 0);
+	if (ret) {
+		pci_dbg(qdev->pdev, "%s: drm_dev_register failed %d\n", __func__, ret);
+		goto drm_reg_fail;
+	}
+
+	return 0;
+
+drm_reg_fail:
+	qaic_sysfs_remove(qddev);
+sysfs_init_fail:
+	mutex_destroy(&qddev->users_mutex);
+	mutex_lock(&qdev->qaic_drm_devices_mutex);
+	list_del(&qddev->node);
+	mutex_unlock(&qdev->qaic_drm_devices_mutex);
+	if (partition_id == QAIC_NO_PARTITION)
+		qdev->base_dev = NULL;
+	drm_dev_put(ddev);
+ddev_fail:
+	kfree(qddev);
+qddev_fail:
+	return ret;
+}
+
+static void qaic_destroy_drm_device(struct qaic_device *qdev, s32 partition_id,
+				    struct qaic_user *owner)
+{
+	struct qaic_drm_device *qddev;
+	struct qaic_drm_device *q;
+	struct qaic_user *usr;
+
+	list_for_each_entry_safe(qddev, q, &qdev->qaic_drm_devices, node) {
+		/*
+		 * Skip devices in case we just want to remove devices
+		 * specific to a owner or reservation id.
+		 *
+		 * owner	partition_id	notes
+		 * ----------------------------------
+		 * NULL		NO_PARTITION	delete base + all derived (qdev
+		 *				reset)
+		 * !NULL	NO_PARTITION	delete derived devs created by
+		 *				owner.
+		 * !NULL	>NO_PARTITION	delete derived dev identified by
+		 *				the partition id and created by
+		 *				owner
+		 * NULL		>NO_PARTITION	invalid (no-op)
+		 *
+		 * if partition_id is any value < QAIC_NO_PARTITION this will be
+		 * a no-op.
+		 */
+		if (owner && owner != qddev->owner)
+			continue;
+
+		if (partition_id != QAIC_NO_PARTITION &&
+		    partition_id != qddev->partition_id && !owner)
+			continue;
+
+		/*
+		 * Existing users get unresolvable errors till they close FDs.
+		 * Need to sync carefully with users calling close().  The
+		 * list of users can be modified elsewhere when the lock isn't
+		 * held here, but the sync'ing the srcu with the mutex held
+		 * could deadlock.  Grab the mutex so that the list will be
+		 * unmodified.  The user we get will exist as long as the
+		 * lock is held.  Signal that the qcdev is going away, and
+		 * grab a reference to the user so they don't go away for
+		 * synchronize_srcu().  Then release the mutex to avoid
+		 * deadlock and make sure the user has observed the signal.
+		 * With the lock released, we cannot maintain any state of the
+		 * user list.
+		 */
+		mutex_lock(&qddev->users_mutex);
+		while (!list_empty(&qddev->users)) {
+			usr = list_first_entry(&qddev->users, struct qaic_user,
+					       node);
+			list_del_init(&usr->node);
+			kref_get(&usr->ref_count);
+			usr->qddev = NULL;
+			mutex_unlock(&qddev->users_mutex);
+			synchronize_srcu(&usr->qddev_lock);
+			kref_put(&usr->ref_count, free_usr);
+			mutex_lock(&qddev->users_mutex);
+		}
+		mutex_unlock(&qddev->users_mutex);
+
+		if (qddev->ddev) {
+			qaic_sysfs_remove(qddev);
+			drm_dev_unregister(qddev->ddev);
+			drm_dev_put(qddev->ddev);
+		}
+
+		list_del(&qddev->node);
+		kfree(qddev);
+	}
+}
+
+static int qaic_mhi_probe(struct mhi_device *mhi_dev,
+			  const struct mhi_device_id *id)
+{
+	struct qaic_device *qdev;
+	u16 major, minor;
+	int ret;
+
+	/*
+	 * Invoking this function indicates that the control channel to the
+	 * device is available.  We use that as a signal to indicate that
+	 * the device side firmware has booted.  The device side firmware
+	 * manages the device resources, so we need to communicate with it
+	 * via the control channel in order to utilize the device.  Therefore
+	 * we wait until this signal to create the drm dev that userspace will
+	 * use to control the device, because without the device side firmware,
+	 * userspace can't do anything useful.
+	 */
+
+	qdev = pci_get_drvdata(to_pci_dev(mhi_dev->mhi_cntrl->cntrl_dev));
+
+	qdev->in_reset = false;
+
+	dev_set_drvdata(&mhi_dev->dev, qdev);
+	qdev->cntl_ch = mhi_dev;
+
+	ret = qaic_control_open(qdev);
+	if (ret) {
+		pci_dbg(qdev->pdev, "%s: control_open failed %d\n", __func__, ret);
+		goto err;
+	}
+
+	ret = get_cntl_version(qdev, NULL, &major, &minor);
+	if (ret || major != cntl_major || minor > cntl_minor) {
+		pci_err(qdev->pdev, "%s: Control protocol version (%d.%d) not supported.  Supported version is (%d.%d). Ret: %d\n",
+			__func__, major, minor, cntl_major, cntl_minor, ret);
+		ret = -EINVAL;
+		goto close_control;
+	}
+
+	ret = qaic_create_drm_device(qdev, QAIC_NO_PARTITION, NULL);
+
+	return ret;
+
+close_control:
+	qaic_control_close(qdev);
+err:
+	return ret;
+}
+
+static void qaic_mhi_remove(struct mhi_device *mhi_dev)
+{
+}
+
+static void qaic_notify_reset(struct qaic_device *qdev)
+{
+	int i;
+
+	qdev->in_reset = true;
+	/* wake up any waiters to avoid waiting for timeouts at sync */
+	wake_all_cntl(qdev);
+	wake_all_telemetry(qdev);
+	for (i = 0; i < qdev->num_dbc; ++i)
+		wakeup_dbc(qdev, i);
+	synchronize_srcu(&qdev->dev_lock);
+}
+
+void qaic_dev_reset_clean_local_state(struct qaic_device *qdev, bool exit_reset)
+{
+	int i;
+
+	qaic_notify_reset(qdev);
+
+	/* remove drmdevs to prevent new users from coming in */
+	if (qdev->base_dev)
+		qaic_destroy_drm_device(qdev, QAIC_NO_PARTITION, NULL);
+
+	/* start tearing things down */
+	for (i = 0; i < qdev->num_dbc; ++i) {
+		release_dbc(qdev, i, false);
+		clean_up_ssr(qdev, i);
+	}
+
+	if (exit_reset)
+		qdev->in_reset = false;
+}
+
+static int qaic_pci_probe(struct pci_dev *pdev,
+			  const struct pci_device_id *id)
+{
+	int ret;
+	int i;
+	int mhi_irq;
+	struct qaic_device *qdev;
+
+	qdev = kzalloc(sizeof(*qdev), GFP_KERNEL);
+	if (!qdev) {
+		ret = -ENOMEM;
+		goto qdev_fail;
+	}
+
+	if (id->device == PCI_DEV_AIC100) {
+		qdev->num_dbc = 16;
+		qdev->dbc = kcalloc(qdev->num_dbc, sizeof(*qdev->dbc),
+				    GFP_KERNEL);
+		if (!qdev->dbc) {
+			ret = -ENOMEM;
+			goto device_id_fail;
+		}
+	} else {
+		pci_dbg(pdev, "%s: No matching device found for device id %d\n",
+			__func__, id->device);
+		ret = -EINVAL;
+		goto device_id_fail;
+	}
+
+	qdev->cntl_wq = alloc_workqueue("qaic_cntl", WQ_UNBOUND, 0);
+	if (!qdev->cntl_wq) {
+		ret = -ENOMEM;
+		goto wq_fail;
+	}
+	qdev->tele_wq = alloc_workqueue("qaic_tele", WQ_UNBOUND, 0);
+	if (!qdev->tele_wq) {
+		ret = -ENOMEM;
+		goto tele_wq_fail;
+	}
+	qdev->ssr_wq = alloc_workqueue("qaic_ssr", WQ_UNBOUND, 0);
+	if (!qdev->ssr_wq) {
+		ret = -ENOMEM;
+		goto ssr_wq_fail;
+	}
+	pci_set_drvdata(pdev, qdev);
+	qdev->pdev = pdev;
+	mutex_init(&qdev->cntl_mutex);
+	INIT_LIST_HEAD(&qdev->cntl_xfer_list);
+	init_srcu_struct(&qdev->dev_lock);
+	mutex_init(&qdev->tele_mutex);
+	INIT_LIST_HEAD(&qdev->tele_xfer_list);
+	INIT_LIST_HEAD(&qdev->bootlog);
+	mutex_init(&qdev->bootlog_mutex);
+	INIT_LIST_HEAD(&qdev->qaic_drm_devices);
+	mutex_init(&qdev->qaic_drm_devices_mutex);
+	for (i = 0; i < qdev->num_dbc; ++i) {
+		mutex_init(&qdev->dbc[i].handle_lock);
+		spin_lock_init(&qdev->dbc[i].xfer_lock);
+		idr_init(&qdev->dbc[i].buf_handles);
+		qdev->dbc[i].qdev = qdev;
+		qdev->dbc[i].id = i;
+		INIT_LIST_HEAD(&qdev->dbc[i].xfer_list);
+		init_srcu_struct(&qdev->dbc[i].ch_lock);
+		init_waitqueue_head(&qdev->dbc[i].dbc_release);
+		INIT_LIST_HEAD(&qdev->dbc[i].bo_lists);
+	}
+
+	qdev->bars = pci_select_bars(pdev, IORESOURCE_MEM);
+
+	/* make sure the device has the expected BARs */
+	if (qdev->bars != (BIT(0) | BIT(2) | BIT(4))) {
+		pci_dbg(pdev, "%s: expected BARs 0, 2, and 4 not found in device.  Found 0x%x\n",
+			__func__, qdev->bars);
+		ret = -EINVAL;
+		goto bar_fail;
+	}
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto enable_fail;
+
+	ret = pci_request_selected_regions(pdev, qdev->bars, "aic100");
+	if (ret)
+		goto request_regions_fail;
+
+	pci_set_master(pdev);
+
+	ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+	if (ret)
+		goto dma_mask_fail;
+	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+	if (ret)
+		goto dma_mask_fail;
+	ret = dma_set_max_seg_size(&pdev->dev, UINT_MAX);
+	if (ret)
+		goto dma_mask_fail;
+
+	qdev->bar_0 = pci_ioremap_bar(pdev, 0);
+	if (!qdev->bar_0) {
+		ret = -ENOMEM;
+		goto ioremap_0_fail;
+	}
+
+	qdev->bar_2 = pci_ioremap_bar(pdev, 2);
+	if (!qdev->bar_2) {
+		ret = -ENOMEM;
+		goto ioremap_2_fail;
+	}
+
+	for (i = 0; i < qdev->num_dbc; ++i)
+		qdev->dbc[i].dbc_base = qdev->bar_2 + QAIC_DBC_OFF(i);
+
+	ret = pci_alloc_irq_vectors(pdev, 1, 32, PCI_IRQ_MSI);
+	if (ret < 0)
+		goto alloc_irq_fail;
+
+	if (ret < 32) {
+		pci_err(pdev, "%s: Requested 32 MSIs.  Obtained %d MSIs which is less than the 32 required.\n",
+			__func__, ret);
+		ret = -ENODEV;
+		goto invalid_msi_config;
+	}
+
+	mhi_irq = pci_irq_vector(pdev, 0);
+	if (mhi_irq < 0) {
+		ret = mhi_irq;
+		goto get_mhi_irq_fail;
+	}
+
+	for (i = 0; i < qdev->num_dbc; ++i) {
+		ret = devm_request_threaded_irq(&pdev->dev,
+						pci_irq_vector(pdev, i + 1),
+						dbc_irq_handler,
+						dbc_irq_threaded_fn,
+						IRQF_SHARED,
+						"qaic_dbc",
+						&qdev->dbc[i]);
+		if (ret)
+			goto get_dbc_irq_failed;
+
+		if (poll_datapath) {
+			qdev->dbc[i].irq = pci_irq_vector(pdev, i + 1);
+			disable_irq_nosync(qdev->dbc[i].irq);
+			INIT_WORK(&qdev->dbc[i].poll_work, irq_polling_work);
+		}
+	}
+
+	qdev->mhi_cntl = qaic_mhi_register_controller(pdev, qdev->bar_0, mhi_irq);
+	if (IS_ERR(qdev->mhi_cntl)) {
+		ret = PTR_ERR(qdev->mhi_cntl);
+		goto mhi_register_fail;
+	}
+
+	return 0;
+
+mhi_register_fail:
+get_dbc_irq_failed:
+	for (i = 0; i < qdev->num_dbc; ++i)
+		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
+			      &qdev->dbc[i]);
+get_mhi_irq_fail:
+invalid_msi_config:
+	pci_free_irq_vectors(pdev);
+alloc_irq_fail:
+	iounmap(qdev->bar_2);
+ioremap_2_fail:
+	iounmap(qdev->bar_0);
+ioremap_0_fail:
+dma_mask_fail:
+	pci_clear_master(pdev);
+	pci_release_selected_regions(pdev, qdev->bars);
+request_regions_fail:
+	pci_disable_device(pdev);
+enable_fail:
+	pci_set_drvdata(pdev, NULL);
+bar_fail:
+	for (i = 0; i < qdev->num_dbc; ++i) {
+		cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
+		idr_destroy(&qdev->dbc[i].buf_handles);
+	}
+	cleanup_srcu_struct(&qdev->dev_lock);
+	destroy_workqueue(qdev->ssr_wq);
+ssr_wq_fail:
+	destroy_workqueue(qdev->tele_wq);
+tele_wq_fail:
+	destroy_workqueue(qdev->cntl_wq);
+wq_fail:
+	kfree(qdev->dbc);
+device_id_fail:
+	kfree(qdev);
+qdev_fail:
+	return ret;
+}
+
+static void qaic_pci_remove(struct pci_dev *pdev)
+{
+	struct qaic_device *qdev = pci_get_drvdata(pdev);
+	int i;
+
+	if (!qdev)
+		return;
+
+	qaic_dev_reset_clean_local_state(qdev, false);
+	qaic_mhi_free_controller(qdev->mhi_cntl, link_up);
+	for (i = 0; i < qdev->num_dbc; ++i) {
+		devm_free_irq(&pdev->dev, pci_irq_vector(pdev, i + 1),
+			      &qdev->dbc[i]);
+		cleanup_srcu_struct(&qdev->dbc[i].ch_lock);
+		idr_destroy(&qdev->dbc[i].buf_handles);
+	}
+	destroy_workqueue(qdev->cntl_wq);
+	destroy_workqueue(qdev->tele_wq);
+	destroy_workqueue(qdev->ssr_wq);
+	pci_free_irq_vectors(pdev);
+	iounmap(qdev->bar_0);
+	pci_clear_master(pdev);
+	pci_release_selected_regions(pdev, qdev->bars);
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	kfree(qdev->dbc);
+	kfree(qdev);
+}
+
+static void qaic_pci_shutdown(struct pci_dev *pdev)
+{
+	link_up = true;
+	qaic_pci_remove(pdev);
+}
+
+static pci_ers_result_t qaic_pci_error_detected(struct pci_dev *pdev,
+						pci_channel_state_t error)
+{
+	return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static void qaic_pci_reset_prepare(struct pci_dev *pdev)
+{
+	struct qaic_device *qdev = pci_get_drvdata(pdev);
+
+	qaic_notify_reset(qdev);
+	qaic_mhi_start_reset(qdev->mhi_cntl);
+	qaic_dev_reset_clean_local_state(qdev, false);
+}
+
+static void qaic_pci_reset_done(struct pci_dev *pdev)
+{
+	struct qaic_device *qdev = pci_get_drvdata(pdev);
+
+	qdev->in_reset = false;
+	qaic_mhi_reset_done(qdev->mhi_cntl);
+}
+
+static const struct mhi_device_id qaic_mhi_match_table[] = {
+	{ .chan = "QAIC_CONTROL", },
+	{},
+};
+
+static struct mhi_driver qaic_mhi_driver = {
+	.id_table = qaic_mhi_match_table,
+	.remove = qaic_mhi_remove,
+	.probe = qaic_mhi_probe,
+	.ul_xfer_cb = qaic_mhi_ul_xfer_cb,
+	.dl_xfer_cb = qaic_mhi_dl_xfer_cb,
+	.driver = {
+		.name = "qaic_mhi",
+		.owner = THIS_MODULE,
+	},
+};
+
+static const struct pci_device_id ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, PCI_DEV_AIC100), },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, ids);
+
+static const struct pci_error_handlers qaic_pci_err_handler = {
+	.error_detected = qaic_pci_error_detected,
+	.reset_prepare = qaic_pci_reset_prepare,
+	.reset_done = qaic_pci_reset_done,
+};
+
+static struct pci_driver qaic_pci_driver = {
+	.name = QAIC_NAME,
+	.id_table = ids,
+	.probe = qaic_pci_probe,
+	.remove = qaic_pci_remove,
+	.shutdown = qaic_pci_shutdown,
+	.err_handler = &qaic_pci_err_handler,
+};
+
+static int __init qaic_init(void)
+{
+	int ret;
+
+	if (datapath_polling) {
+		poll_datapath = true;
+		pr_info("qaic: driver initializing in datapath polling mode\n");
+	}
+
+	qaic_logging_register();
+
+	ret = mhi_driver_register(&qaic_mhi_driver);
+	if (ret) {
+		pr_debug("qaic: mhi_driver_register failed %d\n", ret);
+		goto free_class;
+	}
+
+	ret = pci_register_driver(&qaic_pci_driver);
+
+	if (ret) {
+		pr_debug("qaic: pci_register_driver failed %d\n", ret);
+		goto free_mhi;
+	}
+
+	qaic_telemetry_register();
+	qaic_ras_register();
+	qaic_ssr_register();
+	goto out;
+
+free_mhi:
+	mhi_driver_unregister(&qaic_mhi_driver);
+free_class:
+out:
+	if (ret)
+		qaic_logging_unregister();
+
+	return ret;
+}
+
+static void __exit qaic_exit(void)
+{
+	pr_debug("qaic: exit\n");
+	link_up = true;
+	pci_unregister_driver(&qaic_pci_driver);
+	mhi_driver_unregister(&qaic_mhi_driver);
+	qaic_telemetry_unregister();
+	qaic_ras_unregister();
+	qaic_ssr_unregister();
+	qaic_logging_unregister();
+}
+
+module_init(qaic_init);
+module_exit(qaic_exit);
+
+MODULE_AUTHOR(QAIC_DESC " Kernel Driver Team");
+MODULE_DESCRIPTION(QAIC_DESC " DRM driver");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(STR(MAJOR_VER) "." STR(MINOR_VER) "." STR(PATCH_VER));
diff --git a/include/uapi/drm/qaic_drm.h b/include/uapi/drm/qaic_drm.h
new file mode 100644
index 0000000..5fb3981
--- /dev/null
+++ b/include/uapi/drm/qaic_drm.h
@@ -0,0 +1,283 @@ 
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+ *
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#ifndef QAIC_DRM_H_
+#define QAIC_DRM_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include "drm.h"
+
+#if defined(__CPLUSPLUS)
+extern "C" {
+#endif
+
+#define QAIC_MANAGE_MAX_MSG_LENGTH 0x1000	/**<
+						  * The length(4K) includes len and
+						  * count fields of qaic_manage_msg
+						  */
+
+enum qaic_sem_flags {
+	SEM_INSYNCFENCE =	0x1,
+	SEM_OUTSYNCFENCE =	0x2,
+};
+
+enum qaic_sem_cmd {
+	SEM_NOP =		0,
+	SEM_INIT =		1,
+	SEM_INC =		2,
+	SEM_DEC =		3,
+	SEM_WAIT_EQUAL =	4,
+	SEM_WAIT_GT_EQ =	5, /**< Greater than or equal */
+	SEM_WAIT_GT_0 =		6, /**< Greater than 0 */
+};
+
+enum qaic_manage_transaction_type {
+	TRANS_UNDEFINED =			0,
+	TRANS_PASSTHROUGH_FROM_USR =		1,
+	TRANS_PASSTHROUGH_TO_USR =		2,
+	TRANS_PASSTHROUGH_FROM_DEV =		3,
+	TRANS_PASSTHROUGH_TO_DEV =		4,
+	TRANS_DMA_XFER_FROM_USR =		5,
+	TRANS_DMA_XFER_TO_DEV =			6,
+	TRANS_ACTIVATE_FROM_USR =		7,
+	TRANS_ACTIVATE_FROM_DEV =		8,
+	TRANS_ACTIVATE_TO_DEV =			9,
+	TRANS_DEACTIVATE_FROM_USR =		10,
+	TRANS_DEACTIVATE_FROM_DEV =		11,
+	TRANS_STATUS_FROM_USR =			12,
+	TRANS_STATUS_TO_USR =			13,
+	TRANS_STATUS_FROM_DEV =			14,
+	TRANS_STATUS_TO_DEV =			15,
+	TRANS_TERMINATE_FROM_DEV =		16,
+	TRANS_TERMINATE_TO_DEV =		17,
+	TRANS_DMA_XFER_CONT =			18,
+	TRANS_VALIDATE_PARTITION_FROM_DEV =	19,
+	TRANS_VALIDATE_PARTITION_TO_DEV =	20,
+	TRANS_MAX =				21
+};
+
+struct qaic_manage_trans_hdr {
+	__u32 type;	/**< in, value from enum manage_transaction_type */
+	__u32 len;	/**< in, length of this transaction, including the header */
+};
+
+struct qaic_manage_trans_passthrough {
+	struct qaic_manage_trans_hdr hdr;
+	__u8 data[];	/**< in, userspace must encode in little endian */
+};
+
+struct qaic_manage_trans_dma_xfer {
+	struct qaic_manage_trans_hdr hdr;
+	__u32 tag;	/**< in, device specific */
+	__u32 count;	/**< in */
+	__u64 addr;	/**< in, address of the data to transferred via DMA */
+	__u64 size;	/**< in, length of the data to transferred via DMA */
+};
+
+struct qaic_manage_trans_activate_to_dev {
+	struct qaic_manage_trans_hdr hdr;
+	__u32 queue_size;	/**<
+				  * in, number of elements in DBC request
+				  * and respose queue
+				  */
+	__u32 eventfd;		/**< in */
+	__u32 options;		/**< in, device specific */
+	__u32 pad;		/**< pad must be 0 */
+};
+
+struct qaic_manage_trans_activate_from_dev {
+	struct qaic_manage_trans_hdr hdr;
+	__u32 status;	/**< out, status of activate transaction */
+	__u32 dbc_id;	/**< out, Identifier of assigned DMA Bridge channel */
+	__u64 options;	/**< out */
+};
+
+struct qaic_manage_trans_deactivate {
+	struct qaic_manage_trans_hdr hdr;
+	__u32 dbc_id;	/**< in, Identifier of assigned DMA Bridge channel */
+	__u32 pad;	/**< pad must be 0 */
+};
+
+struct qaic_manage_trans_status_to_dev {
+	struct qaic_manage_trans_hdr hdr;
+};
+
+struct qaic_manage_trans_status_from_dev {
+	struct qaic_manage_trans_hdr hdr;
+	__u16 major;	/**< out, major vesrion of NNC protocol used by device */
+	__u16 minor;	/**< out, minor vesrion of NNC protocol used by device */
+	__u32 status;	/**< out, status of query transaction  */
+	__u64 status_flags;	/**<
+				  * out
+				  * 0    : If set then device has CRC check enabled
+				  * 1:63 : Unused
+				  */
+};
+
+struct qaic_manage_msg {
+	__u32 len;	/**< in, Length of valid data - ie sum of all transactions */
+	__u32 count;	/**< in, Number of transactions in message */
+	__u64 data;	/**< in, Pointer to array of transactions */
+};
+
+struct qaic_create_bo {
+	__u64 size;	/**< in, Size of BO in byte */
+	__u32 handle;	/**< out, Returned GEM handle for the BO */
+	__u32 pad;	/**< pad must be 0 */
+};
+
+struct qaic_mmap_bo {
+	__u32 handle;	/**< in, Handle for the BO being mapped. */
+	__u32 pad;	/**< pad must be 0 */
+	__u64 offset;	/**<
+			  * out, offset into the drm node to use for
+			  * subsequent mmap call
+			  */
+};
+
+/**
+ * @brief semaphore command
+ */
+struct qaic_sem {
+	__u16 val;	/**< in, Only lower 12 bits are valid */
+	__u8  index;	/**< in, Only lower 5 bits are valid */
+	__u8  presync;	/**< in, 1 if presync operation, 0 if postsync */
+	__u8  cmd;	/**< in, See enum sem_cmd */
+	__u8  flags;	/**< in, See sem_flags for valid bits.  All others must be 0 */
+	__u16 pad;	/**< pad must be 0 */
+};
+
+struct qaic_attach_slice_entry {
+	__u64 size;		/**< in, Size memory to allocate for this BO slice */
+	struct qaic_sem	sem0;	/**< in, Must be zero if not valid */
+	struct qaic_sem	sem1;	/**< in, Must be zero if not valid */
+	struct qaic_sem	sem2;	/**< in, Must be zero if not valid */
+	struct qaic_sem	sem3;	/**< in, Must be zero if not valid */
+	__u64 dev_addr;		/**< in, Address in device to/from which data is copied */
+	__u64 db_addr;		/**< in, Doorbell address */
+	__u32 db_data;		/**< in, Data to write to doorbell */
+	__u32 db_len;		/**<
+				  * in, Doorbell length - 32, 16, or 8 bits.
+				  * 0 means doorbell is inactive
+				  */
+	__u64 offset;		/**< in, Offset from start of buffer */
+};
+
+struct qaic_attach_slice_hdr {
+	__u32 count;	/**< in, Number of slices for this BO */
+	__u32 dbc_id;	/**< in, Associate this BO with this DMA Bridge channel */
+	__u32 handle;	/**< in, Handle of BO to which slicing information is to be attached */
+	__u32 dir;	/**< in, Direction of data: 1 = DMA_TO_DEVICE, 2 = DMA_FROM_DEVICE */
+	__u64 size;	/**<
+			  * in, Total length of BO
+			  * If BO is imported (DMABUF/PRIME) then this size
+			  * should not exceed the size of DMABUF provided.
+			  * If BO is allocated using DRM_IOCTL_QAIC_CREATE_BO
+			  * then this size should be exactly same as the size
+			  * provided during DRM_IOCTL_QAIC_CREATE_BO.
+			  */
+};
+
+struct qaic_attach_slice {
+	struct qaic_attach_slice_hdr hdr;
+	__u64 data;	/**<
+			  * in, Pointer to a buffer which is container of
+			  * struct qaic_attach_slice_entry[]
+			  */
+};
+
+struct qaic_execute_entry {
+	__u32 handle;	/**< in, buffer handle */
+	__u32 dir;	/**< in, 1 = to device, 2 = from device */
+};
+
+struct qaic_partial_execute_entry {
+	__u32 handle;	/**< in, buffer handle */
+	__u32 dir;	/**< in, 1 = to device, 2 = from device */
+	__u64 resize;	/**< in, 0 = no resize */
+};
+
+struct qaic_execute_hdr {
+	__u32 count;	/**< in, number of executes following this header */
+	__u32 dbc_id;	/**< in, Identifier of assigned DMA Bridge channel */
+};
+
+struct qaic_execute {
+	struct qaic_execute_hdr hdr;
+	__u64 data;	/**< in, qaic_execute_entry or qaic_partial_execute_entry container */
+};
+
+struct qaic_wait {
+	__u32 handle;	/**< in, handle to wait on until execute is complete */
+	__u32 timeout;	/**< in, timeout for wait(in ms) */
+	__u32 dbc_id;	/**< in, Identifier of assigned DMA Bridge channel */
+	__u32 pad;	/**< pad must be 0 */
+};
+
+struct qaic_perf_stats_hdr {
+	__u16 count;	/**< in, Total number BOs requested */
+	__u16 pad;	/**< pad must be 0 */
+	__u32 dbc_id;	/**< in, Identifier of assigned DMA Bridge channel */
+};
+
+struct qaic_perf_stats {
+	struct qaic_perf_stats_hdr hdr;
+	__u64 data;	/**< in, qaic_perf_stats_entry container */
+};
+
+struct qaic_perf_stats_entry {
+	__u32 handle;			/**< in, Handle of the memory request */
+	__u32 queue_level_before;	/**<
+					  * out, Number of elements in queue
+					  * before submission given memory request
+					  */
+	__u32 num_queue_element;	/**<
+					  * out, Number of elements to add in the
+					  * queue for given memory request
+					  */
+	__u32 submit_latency_us;	/**<
+					  * out, Time taken by kernel to submit
+					  * the request to device
+					  */
+	__u32 device_latency_us;	/**<
+					  * out, Time taken by device to execute the
+					  * request. 0 if request is not completed
+					  */
+	__u32 pad;			/**< pad must be 0 */
+};
+
+struct qaic_part_dev {
+	__u32 partition_id;	/**< in, reservation id */
+	__u16 remove;		/**< in, 1 - Remove device 0 - Create device */
+	__u16 pad;		/**< pad must be 0 */
+};
+
+#define DRM_QAIC_MANAGE				0x00
+#define DRM_QAIC_CREATE_BO			0x01
+#define DRM_QAIC_MMAP_BO			0x02
+#define DRM_QAIC_ATTACH_SLICE_BO		0x03
+#define DRM_QAIC_EXECUTE_BO			0x04
+#define DRM_QAIC_PARTIAL_EXECUTE_BO		0x05
+#define DRM_QAIC_WAIT_BO			0x06
+#define DRM_QAIC_PERF_STATS_BO			0x07
+#define DRM_QAIC_PART_DEV			0x08
+
+#define DRM_IOCTL_QAIC_MANAGE			DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MANAGE, struct qaic_manage_msg)
+#define DRM_IOCTL_QAIC_CREATE_BO		DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_CREATE_BO,	struct qaic_create_bo)
+#define DRM_IOCTL_QAIC_MMAP_BO			DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_MMAP_BO, struct qaic_mmap_bo)
+#define DRM_IOCTL_QAIC_ATTACH_SLICE_BO		DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_ATTACH_SLICE_BO, struct qaic_attach_slice)
+#define DRM_IOCTL_QAIC_EXECUTE_BO		DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_EXECUTE_BO,	struct qaic_execute)
+#define DRM_IOCTL_QAIC_PARTIAL_EXECUTE_BO	DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_PARTIAL_EXECUTE_BO,	struct qaic_execute)
+#define DRM_IOCTL_QAIC_WAIT_BO			DRM_IOW(DRM_COMMAND_BASE + DRM_QAIC_WAIT_BO, struct qaic_wait)
+#define DRM_IOCTL_QAIC_PERF_STATS_BO		DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_PERF_STATS_BO, struct qaic_perf_stats)
+#define DRM_IOCTL_QAIC_PART_DEV			DRM_IOWR(DRM_COMMAND_BASE + DRM_QAIC_PART_DEV, struct qaic_part_dev)
+
+#if defined(__CPLUSPLUS)
+}
+#endif
+
+#endif /* QAIC_DRM_H_ */