Message ID | 20220811140738.96348-1-dev@pschenker.ch (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v2] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy | expand |
On Thu, Aug 11, 2022 at 04:07:38PM +0200, Philippe Schenker wrote: > From: Philippe Schenker <philippe.schenker@toradex.com> > > The Verdin iMX8M Mini System on Module does not have USB-ID signal > connected on Verdin USB_2 (usbotg2). On Verdin Development board this is > no problem, as we have connected a USB-Hub that is always connected. > > However, if Verdin USB_2 is desired to be used as a single USB-Host port > the chipidea driver does not detect if a USB device is plugged into this > port, due to runtime pm shutting down the PHY. > > Add the power-domain &pgc_otg2 to &usbphynop2 in order to detect > plugging events and enumerate the usb device. > > Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini") > Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi index d1b4582f44c4..34808aa36c2b 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi @@ -745,6 +745,7 @@ &usbphynop1 { }; &usbphynop2 { + power-domains = <&pgc_otg2>; vcc-supply = <®_vdd_3v3>; };