Message ID | 20220819145018.35732-4-manivannan.sadhasivam@linaro.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | pci_endpoint_test: Fix the return value of IOCTLs | expand |
On Fri, Aug 19, 2022 at 08:20:16PM +0530, Manivannan Sadhasivam wrote: > "pci_endpoint_test" driver now returns 0 for success and negative error > code for failure. So adapt to the change by reporting FAILURE if the > return value is < 0, and SUCCESS otherwise. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Fixes: tag and cc: stable? thanks, greg k-h
On Fri, Aug 19, 2022 at 05:27:24PM +0200, Greg KH wrote: > On Fri, Aug 19, 2022 at 08:20:16PM +0530, Manivannan Sadhasivam wrote: > > "pci_endpoint_test" driver now returns 0 for success and negative error > > code for failure. So adapt to the change by reporting FAILURE if the > > return value is < 0, and SUCCESS otherwise. > > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > > Fixes: tag and cc: stable? > Okay, then the same needs to be done for pci_endpoint_test and Documentation. Thanks, Mani > thanks, > > greg k-h
2022年8月19日(金) 23:50 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>: > > "pci_endpoint_test" driver now returns 0 for success and negative error > code for failure. So adapt to the change by reporting FAILURE if the > return value is < 0, and SUCCESS otherwise. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > tools/pci/pcitest.c | 41 +++++++++++++++++++++-------------------- > 1 file changed, 21 insertions(+), 20 deletions(-) > > diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c > index 441b54234635..a4e5b17cc3b5 100644 > --- a/tools/pci/pcitest.c > +++ b/tools/pci/pcitest.c > @@ -18,7 +18,6 @@ > > #define BILLION 1E9 > > -static char *result[] = { "NOT OKAY", "OKAY" }; > static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; > > struct pci_test { > @@ -54,9 +53,9 @@ static int run_test(struct pci_test *test) > ret = ioctl(fd, PCITEST_BAR, test->barnum); > fprintf(stdout, "BAR%d:\t\t", test->barnum); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->set_irqtype) { > @@ -65,16 +64,18 @@ static int run_test(struct pci_test *test) > if (ret < 0) > fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->get_irqtype) { > ret = ioctl(fd, PCITEST_GET_IRQTYPE); > fprintf(stdout, "GET IRQ TYPE:\t\t"); > - if (ret < 0) > + if (ret < 0) { > fprintf(stdout, "FAILED\n"); > - else > + } else { > fprintf(stdout, "%s\n", irq[ret]); > + ret = 0; > + } > } > > if (test->clear_irq) { > @@ -83,34 +84,34 @@ static int run_test(struct pci_test *test) > if (ret < 0) > fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->legacyirq) { > ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); > fprintf(stdout, "LEGACY IRQ:\t"); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->msinum > 0 && test->msinum <= 32) { > ret = ioctl(fd, PCITEST_MSI, test->msinum); > fprintf(stdout, "MSI%d:\t\t", test->msinum); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->msixnum > 0 && test->msixnum <= 2048) { > ret = ioctl(fd, PCITEST_MSIX, test->msixnum); > fprintf(stdout, "MSI-X%d:\t\t", test->msixnum); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->write) { > @@ -120,9 +121,9 @@ static int run_test(struct pci_test *test) > ret = ioctl(fd, PCITEST_WRITE, ¶m); > fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->read) { > @@ -132,9 +133,9 @@ static int run_test(struct pci_test *test) > ret = ioctl(fd, PCITEST_READ, ¶m); > fprintf(stdout, "READ (%7ld bytes):\t\t", test->size); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > if (test->copy) { > @@ -144,14 +145,14 @@ static int run_test(struct pci_test *test) > ret = ioctl(fd, PCITEST_COPY, ¶m); > fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size); > if (ret < 0) > - fprintf(stdout, "TEST FAILED\n"); > + fprintf(stdout, "FAILED\n"); > else > - fprintf(stdout, "%s\n", result[ret]); > + fprintf(stdout, "SUCCESS\n"); > } > > fflush(stdout); > close(fd); > - return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */ > + return ret; > } > > int main(int argc, char **argv) > -- > 2.25.1 > Don't you use the errno of ioctl? Thanks, Shunsuke
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c index 441b54234635..a4e5b17cc3b5 100644 --- a/tools/pci/pcitest.c +++ b/tools/pci/pcitest.c @@ -18,7 +18,6 @@ #define BILLION 1E9 -static char *result[] = { "NOT OKAY", "OKAY" }; static char *irq[] = { "LEGACY", "MSI", "MSI-X" }; struct pci_test { @@ -54,9 +53,9 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_BAR, test->barnum); fprintf(stdout, "BAR%d:\t\t", test->barnum); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->set_irqtype) { @@ -65,16 +64,18 @@ static int run_test(struct pci_test *test) if (ret < 0) fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->get_irqtype) { ret = ioctl(fd, PCITEST_GET_IRQTYPE); fprintf(stdout, "GET IRQ TYPE:\t\t"); - if (ret < 0) + if (ret < 0) { fprintf(stdout, "FAILED\n"); - else + } else { fprintf(stdout, "%s\n", irq[ret]); + ret = 0; + } } if (test->clear_irq) { @@ -83,34 +84,34 @@ static int run_test(struct pci_test *test) if (ret < 0) fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->legacyirq) { ret = ioctl(fd, PCITEST_LEGACY_IRQ, 0); fprintf(stdout, "LEGACY IRQ:\t"); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->msinum > 0 && test->msinum <= 32) { ret = ioctl(fd, PCITEST_MSI, test->msinum); fprintf(stdout, "MSI%d:\t\t", test->msinum); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->msixnum > 0 && test->msixnum <= 2048) { ret = ioctl(fd, PCITEST_MSIX, test->msixnum); fprintf(stdout, "MSI-X%d:\t\t", test->msixnum); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->write) { @@ -120,9 +121,9 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_WRITE, ¶m); fprintf(stdout, "WRITE (%7ld bytes):\t\t", test->size); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->read) { @@ -132,9 +133,9 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_READ, ¶m); fprintf(stdout, "READ (%7ld bytes):\t\t", test->size); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } if (test->copy) { @@ -144,14 +145,14 @@ static int run_test(struct pci_test *test) ret = ioctl(fd, PCITEST_COPY, ¶m); fprintf(stdout, "COPY (%7ld bytes):\t\t", test->size); if (ret < 0) - fprintf(stdout, "TEST FAILED\n"); + fprintf(stdout, "FAILED\n"); else - fprintf(stdout, "%s\n", result[ret]); + fprintf(stdout, "SUCCESS\n"); } fflush(stdout); close(fd); - return (ret < 0) ? ret : 1 - ret; /* return 0 if test succeeded */ + return ret; } int main(int argc, char **argv)
"pci_endpoint_test" driver now returns 0 for success and negative error code for failure. So adapt to the change by reporting FAILURE if the return value is < 0, and SUCCESS otherwise. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- tools/pci/pcitest.c | 41 +++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 20 deletions(-)