| Message ID | 20220815131250.34603-1-tony@atomide.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Clean-up timer-ti-dm a bit | expand |
Hi Tony, On Monday, 15 August 2022 15:12:41 CEST Tony Lindgren wrote: > Hi all, > > This series of changes cleans up timer-ti-dm a bit. After this series we > can start replacing the custom PWM related functions with standard > Linux frameworks and use things like clk_set_duty_cycle(). > > I have only tested this on K3 and omap2+ devices, I don't have any > omap1 devices online right now. Aaro & Janusz, if you could give this > series a quick boot test for omap1 that would be great. AFAICS, OMAP1 timer-ti-dm compatible "omap_timer" device requires OMAP16xx at least, while I only have OMAP15xx. Then, my testing (successful) was limited to a single function -- omap_dm_timer_modify_idlect_mask() -- which is called on any OMAP1 as long as CONFIG_OMAP_DM_TIMER is set (requires CONFIG_COMPILE_TEST). However, I've reviewed the series and it looks good to me. I'm only not sure if we may expect any external users of omap_dm_timer_get_irq(), if not than we could make it local to the driver while being at it. For the whole series: Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Thanks, Janusz > > The patches are against v6.0-rc1. > > Regards, > > Tony > > > Tony Lindgren (9): > clocksource/drivers/timer-ti-dm: Drop unused functions > clocksource/drivers/timer-ti-dm: Simplify register reads with > dmtimer_read() > clocksource/drivers/timer-ti-dm: Simplify register writes with > dmtimer_write() > clocksource/drivers/timer-ti-dm: Simplify register access further > clocksource/drivers/timer-ti-dm: Move private defines to the driver > clocksource/drivers/timer-ti-dm: Use runtime PM directly and check > errors > clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to > driver > clocksource/drivers/timer-ti-dm: Add flag to detect omap1 > clocksource/drivers/timer-ti-dm: Get clock in probe with > devm_clk_get() > > drivers/clocksource/timer-ti-dm.c | 681 +++++++++++++++++++----------- > include/clocksource/timer-ti-dm.h | 112 ----- > 2 files changed, 429 insertions(+), 364 deletions(-) > >
* Janusz Krzysztofik <jmkrzyszt@gmail.com> [220822 22:22]: > Hi Tony, > > On Monday, 15 August 2022 15:12:41 CEST Tony Lindgren wrote: > > Hi all, > > > > This series of changes cleans up timer-ti-dm a bit. After this series we > > can start replacing the custom PWM related functions with standard > > Linux frameworks and use things like clk_set_duty_cycle(). > > > > I have only tested this on K3 and omap2+ devices, I don't have any > > omap1 devices online right now. Aaro & Janusz, if you could give this > > series a quick boot test for omap1 that would be great. > > AFAICS, OMAP1 timer-ti-dm compatible "omap_timer" device requires OMAP16xx > at least, while I only have OMAP15xx. Then, my testing (successful) was > limited to a single function -- omap_dm_timer_modify_idlect_mask() -- which > is called on any OMAP1 as long as CONFIG_OMAP_DM_TIMER is set (requires > CONFIG_COMPILE_TEST). However, I've reviewed the series and it looks good > to me. I'm only not sure if we may expect any external users of > omap_dm_timer_get_irq(), if not than we could make it local to the driver while > being at it. OK thanks for testing. And thanks for spotting that omap_dm_timer_get_irq() can be static, I'll post a separate patch for that. Regards, Tony
Hi all, This series of changes cleans up timer-ti-dm a bit. After this series we can start replacing the custom PWM related functions with standard Linux frameworks and use things like clk_set_duty_cycle(). I have only tested this on K3 and omap2+ devices, I don't have any omap1 devices online right now. Aaro & Janusz, if you could give this series a quick boot test for omap1 that would be great. The patches are against v6.0-rc1. Regards, Tony Tony Lindgren (9): clocksource/drivers/timer-ti-dm: Drop unused functions clocksource/drivers/timer-ti-dm: Simplify register reads with dmtimer_read() clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write() clocksource/drivers/timer-ti-dm: Simplify register access further clocksource/drivers/timer-ti-dm: Move private defines to the driver clocksource/drivers/timer-ti-dm: Use runtime PM directly and check errors clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver clocksource/drivers/timer-ti-dm: Add flag to detect omap1 clocksource/drivers/timer-ti-dm: Get clock in probe with devm_clk_get() drivers/clocksource/timer-ti-dm.c | 681 +++++++++++++++++++----------- include/clocksource/timer-ti-dm.h | 112 ----- 2 files changed, 429 insertions(+), 364 deletions(-)