| Message ID | 20220818050900.30062-1-zajec5@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | nvmem: sort config symbols alphabetically | expand |
Thanks Rafał, On 18/08/2022 06:09, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > 1. Match what most subsystems do > 2. Simplify maintenance a bit > 3. Reduce amount of conflicts for new drivers patches > > While at it unify indent level in Makefile. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > drivers/nvmem/Kconfig | 342 +++++++++++++++++++++-------------------- > drivers/nvmem/Makefile | 120 +++++++-------- > 2 files changed, 232 insertions(+), 230 deletions(-) > > diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig > index bab8a29c9861..cb4036f81a25 100644 > --- a/drivers/nvmem/Kconfig > +++ b/drivers/nvmem/Kconfig > @@ -21,6 +21,90 @@ config NVMEM_SYSFS > This interface is mostly used by userspace applications to > read/write directly into nvmem. > > +# Devices > + > +config JZ4780_EFUSE > + tristate "JZ4780 EFUSE Memory Support" > + depends on MACH_INGENIC || COMPILE_TEST > + depends on HAS_IOMEM > + depends on OF > + select REGMAP_MMIO > + help > + Say Y here to include support for JZ4780 efuse memory found on > + all JZ4780 SoC based devices. > + To compile this driver as a module, choose M here: the module > + will be called nvmem_jz4780_efuse. > + > +config MESON_EFUSE > + tristate "Amlogic Meson GX eFuse Support" > + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM > + help > + This is a driver to retrieve specific values from the eFuse found on > + the Amlogic Meson GX SoCs. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_meson_efuse. > + > +config MESON_MX_EFUSE > + tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" > + depends on ARCH_MESON || COMPILE_TEST > + help > + This is a driver to retrieve specific values from the eFuse found on > + the Amlogic Meson6, Meson8 and Meson8b SoCs. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_meson_mx_efuse. > + > +config MICROCHIP_OTPC > + tristate "Microchip OTPC support" > + depends on ARCH_AT91 || COMPILE_TEST > + help > + This driver enable the OTP controller available on Microchip SAMA7G5 > + SoCs. It controlls the access to the OTP memory connected to it. > + > +config MTK_EFUSE > + tristate "Mediatek SoCs EFUSE support" > + depends on ARCH_MEDIATEK || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a driver to access hardware related data like sensor > + calibration, HDMI impedance etc. > + > + This driver can also be built as a module. If so, the module > + will be called efuse-mtk. > + Looks like we ended up with mix two styles of Kconfig symbols here, Pefered way is it prefix the mwith NVMEM_. While you are at it, can you clean this as well. --srini > +config NVMEM_APPLE_EFUSES > + tristate "Apple eFuse support" > + depends on ARCH_APPLE || COMPILE_TEST > + default ARCH_APPLE > + help > + Say y here to enable support for reading eFuses on Apple SoCs > + such as the M1. These are e.g. used to store factory programmed > + calibration data required for the PCIe or the USB-C PHY. > + > + This driver can also be built as a module. If so, the module will > + be called nvmem-apple-efuses. > + > +config NVMEM_BCM_OCOTP > + tristate "Broadcom On-Chip OTP Controller support" > + depends on ARCH_BCM_IPROC || COMPILE_TEST > + depends on HAS_IOMEM > + default ARCH_BCM_IPROC > + help > + Say y here to enable read/write access to the Broadcom OTP > + controller. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem-bcm-ocotp. > + > +config NVMEM_BRCM_NVRAM > + tristate "Broadcom's NVRAM support" > + depends on ARCH_BCM_5301X || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This driver provides support for Broadcom's NVRAM that can be accessed > + using I/O mapping. > + > config NVMEM_IMX_IIM > tristate "i.MX IC Identification Module support" > depends on ARCH_MXC || COMPILE_TEST > @@ -52,17 +136,18 @@ config NVMEM_IMX_OCOTP_SCU > This is a driver for the SCU On-Chip OTP Controller (OCOTP) > available on i.MX8 SoCs. > > -config JZ4780_EFUSE > - tristate "JZ4780 EFUSE Memory Support" > - depends on MACH_INGENIC || COMPILE_TEST > +config NVMEM_LAYERSCAPE_SFP > + tristate "Layerscape SFP (Security Fuse Processor) support" > + depends on ARCH_LAYERSCAPE || COMPILE_TEST > depends on HAS_IOMEM > - depends on OF > select REGMAP_MMIO > help > - Say Y here to include support for JZ4780 efuse memory found on > - all JZ4780 SoC based devices. > - To compile this driver as a module, choose M here: the module > - will be called nvmem_jz4780_efuse. > + This driver provides support to read the eFuses on Freescale > + Layerscape SoC's. For example, the vendor provides a per part > + unique ID there. > + > + This driver can also be built as a module. If so, the module > + will be called layerscape-sfp. > > config NVMEM_LPC18XX_EEPROM > tristate "NXP LPC18XX EEPROM Memory Support" > @@ -96,24 +181,6 @@ config NVMEM_MXS_OCOTP > This driver can also be built as a module. If so, the module > will be called nvmem-mxs-ocotp. > > -config MTK_EFUSE > - tristate "Mediatek SoCs EFUSE support" > - depends on ARCH_MEDIATEK || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This is a driver to access hardware related data like sensor > - calibration, HDMI impedance etc. > - > - This driver can also be built as a module. If so, the module > - will be called efuse-mtk. > - > -config MICROCHIP_OTPC > - tristate "Microchip OTPC support" > - depends on ARCH_AT91 || COMPILE_TEST > - help > - This driver enable the OTP controller available on Microchip SAMA7G5 > - SoCs. It controlls the access to the OTP memory connected to it. > - > config NVMEM_NINTENDO_OTP > tristate "Nintendo Wii and Wii U OTP Support" > depends on WII || COMPILE_TEST > @@ -126,16 +193,25 @@ config NVMEM_NINTENDO_OTP > This driver can also be built as a module. If so, the module > will be called nvmem-nintendo-otp. > > -config QCOM_QFPROM > - tristate "QCOM QFPROM Support" > - depends on ARCH_QCOM || COMPILE_TEST > +config NVMEM_RMEM > + tristate "Reserved Memory Based Driver Support" > depends on HAS_IOMEM > help > - Say y here to enable QFPROM support. The QFPROM provides access > - functions for QFPROM data to rest of the drivers via nvmem interface. > + This driver maps reserved memory into an nvmem device. It might be > + useful to expose information left by firmware in memory. > > This driver can also be built as a module. If so, the module > - will be called nvmem_qfprom. > + will be called nvmem-rmem. > + > +config NVMEM_SNVS_LPGPR > + tristate "Support for Low Power General Purpose Register" > + depends on ARCH_MXC || COMPILE_TEST > + help > + This is a driver for Low Power General Purpose Register (LPGPR) available on > + i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem-snvs-lpgpr. > > config NVMEM_SPMI_SDAM > tristate "SPMI SDAM Support" > @@ -145,40 +221,6 @@ config NVMEM_SPMI_SDAM > Qualcomm Technologies, Inc. PMICs. It provides the clients > an interface to read/write to the SDAM module's shared memory. > > -config ROCKCHIP_EFUSE > - tristate "Rockchip eFuse Support" > - depends on ARCH_ROCKCHIP || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This is a simple drive to dump specified values of Rockchip SoC > - from eFuse, such as cpu-leakage. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem_rockchip_efuse. > - > -config ROCKCHIP_OTP > - tristate "Rockchip OTP controller support" > - depends on ARCH_ROCKCHIP || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This is a simple drive to dump specified values of Rockchip SoC > - from otp, such as cpu-leakage. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem_rockchip_otp. > - > -config NVMEM_BCM_OCOTP > - tristate "Broadcom On-Chip OTP Controller support" > - depends on ARCH_BCM_IPROC || COMPILE_TEST > - depends on HAS_IOMEM > - default ARCH_BCM_IPROC > - help > - Say y here to enable read/write access to the Broadcom OTP > - controller. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem-bcm-ocotp. > - > config NVMEM_STM32_ROMEM > tristate "STMicroelectronics STM32 factory-programmed memory support" > depends on ARCH_STM32 || COMPILE_TEST > @@ -189,6 +231,18 @@ config NVMEM_STM32_ROMEM > This driver can also be built as a module. If so, the module > will be called nvmem-stm32-romem. > > +config NVMEM_SUNPLUS_OCOTP > + tristate "Sunplus SoC OTP support" > + depends on SOC_SP7021 || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a driver for the On-chip OTP controller (OCOTP) available > + on Sunplus SoCs. It provides access to 128 bytes of one-time > + programmable eFuse. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem-sunplus-ocotp. > + > config NVMEM_SUNXI_SID > tristate "Allwinner SoCs SID support" > depends on ARCH_SUNXI > @@ -199,16 +253,18 @@ config NVMEM_SUNXI_SID > This driver can also be built as a module. If so, the module > will be called nvmem_sunxi_sid. > > -config UNIPHIER_EFUSE > - tristate "UniPhier SoCs eFuse support" > - depends on ARCH_UNIPHIER || COMPILE_TEST > - depends on HAS_IOMEM > +config NVMEM_U_BOOT_ENV > + tristate "U-Boot environment variables support" > + depends on OF && MTD > + select CRC32 > help > - This is a simple driver to dump specified values of UniPhier SoC > - from eFuse. > + U-Boot stores its setup as environment variables. This driver adds > + support for verifying & exporting such data. It also exposes variables > + as NVMEM cells so they can be referenced by other drivers. > > - This driver can also be built as a module. If so, the module > - will be called nvmem-uniphier-efuse. > + Currently this drivers works only with env variables on top of MTD. > + > + If compiled as module it will be called nvmem_u-boot-env. > > config NVMEM_VF610_OCOTP > tristate "VF610 SoC OCOTP support" > @@ -221,35 +277,26 @@ config NVMEM_VF610_OCOTP > This driver can also be build as a module. If so, the module will > be called nvmem-vf610-ocotp. > > -config MESON_EFUSE > - tristate "Amlogic Meson GX eFuse Support" > - depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM > - help > - This is a driver to retrieve specific values from the eFuse found on > - the Amlogic Meson GX SoCs. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem_meson_efuse. > - > -config MESON_MX_EFUSE > - tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" > - depends on ARCH_MESON || COMPILE_TEST > +config NVMEM_ZYNQMP > + bool "Xilinx ZYNQMP SoC nvmem firmware support" > + depends on ARCH_ZYNQMP > help > - This is a driver to retrieve specific values from the eFuse found on > - the Amlogic Meson6, Meson8 and Meson8b SoCs. > + This is a driver to access hardware related data like > + soc revision, IDCODE... etc by using the firmware > + interface. > > - This driver can also be built as a module. If so, the module > - will be called nvmem_meson_mx_efuse. > + If sure, say yes. If unsure, say no. > > -config NVMEM_SNVS_LPGPR > - tristate "Support for Low Power General Purpose Register" > - depends on ARCH_MXC || COMPILE_TEST > +config QCOM_QFPROM > + tristate "QCOM QFPROM Support" > + depends on ARCH_QCOM || COMPILE_TEST > + depends on HAS_IOMEM > help > - This is a driver for Low Power General Purpose Register (LPGPR) available on > - i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. > + Say y here to enable QFPROM support. The QFPROM provides access > + functions for QFPROM data to rest of the drivers via nvmem interface. > > This driver can also be built as a module. If so, the module > - will be called nvmem-snvs-lpgpr. > + will be called nvmem_qfprom. > > config RAVE_SP_EEPROM > tristate "Rave SP EEPROM Support" > @@ -257,6 +304,28 @@ config RAVE_SP_EEPROM > help > Say y here to enable Rave SP EEPROM support. > > +config ROCKCHIP_EFUSE > + tristate "Rockchip eFuse Support" > + depends on ARCH_ROCKCHIP || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a simple drive to dump specified values of Rockchip SoC > + from eFuse, such as cpu-leakage. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_rockchip_efuse. > + > +config ROCKCHIP_OTP > + tristate "Rockchip OTP controller support" > + depends on ARCH_ROCKCHIP || COMPILE_TEST > + depends on HAS_IOMEM > + help > + This is a simple drive to dump specified values of Rockchip SoC > + from otp, such as cpu-leakage. > + > + This driver can also be built as a module. If so, the module > + will be called nvmem_rockchip_otp. > + > config SC27XX_EFUSE > tristate "Spreadtrum SC27XX eFuse Support" > depends on MFD_SC27XX_PMIC || COMPILE_TEST > @@ -268,16 +337,6 @@ config SC27XX_EFUSE > This driver can also be built as a module. If so, the module > will be called nvmem-sc27xx-efuse. > > -config NVMEM_ZYNQMP > - bool "Xilinx ZYNQMP SoC nvmem firmware support" > - depends on ARCH_ZYNQMP > - help > - This is a driver to access hardware related data like > - soc revision, IDCODE... etc by using the firmware > - interface. > - > - If sure, say yes. If unsure, say no. > - > config SPRD_EFUSE > tristate "Spreadtrum SoC eFuse Support" > depends on ARCH_SPRD || COMPILE_TEST > @@ -289,72 +348,15 @@ config SPRD_EFUSE > This driver can also be built as a module. If so, the module > will be called nvmem-sprd-efuse. > > -config NVMEM_RMEM > - tristate "Reserved Memory Based Driver Support" > - depends on HAS_IOMEM > - help > - This driver maps reserved memory into an nvmem device. It might be > - useful to expose information left by firmware in memory. > - > - This driver can also be built as a module. If so, the module > - will be called nvmem-rmem. > - > -config NVMEM_BRCM_NVRAM > - tristate "Broadcom's NVRAM support" > - depends on ARCH_BCM_5301X || COMPILE_TEST > - depends on HAS_IOMEM > - help > - This driver provides support for Broadcom's NVRAM that can be accessed > - using I/O mapping. > - > -config NVMEM_LAYERSCAPE_SFP > - tristate "Layerscape SFP (Security Fuse Processor) support" > - depends on ARCH_LAYERSCAPE || COMPILE_TEST > - depends on HAS_IOMEM > - select REGMAP_MMIO > - help > - This driver provides support to read the eFuses on Freescale > - Layerscape SoC's. For example, the vendor provides a per part > - unique ID there. > - > - This driver can also be built as a module. If so, the module > - will be called layerscape-sfp. > - > -config NVMEM_SUNPLUS_OCOTP > - tristate "Sunplus SoC OTP support" > - depends on SOC_SP7021 || COMPILE_TEST > +config UNIPHIER_EFUSE > + tristate "UniPhier SoCs eFuse support" > + depends on ARCH_UNIPHIER || COMPILE_TEST > depends on HAS_IOMEM > help > - This is a driver for the On-chip OTP controller (OCOTP) available > - on Sunplus SoCs. It provides access to 128 bytes of one-time > - programmable eFuse. > + This is a simple driver to dump specified values of UniPhier SoC > + from eFuse. > > This driver can also be built as a module. If so, the module > - will be called nvmem-sunplus-ocotp. > - > -config NVMEM_APPLE_EFUSES > - tristate "Apple eFuse support" > - depends on ARCH_APPLE || COMPILE_TEST > - default ARCH_APPLE > - help > - Say y here to enable support for reading eFuses on Apple SoCs > - such as the M1. These are e.g. used to store factory programmed > - calibration data required for the PCIe or the USB-C PHY. > - > - This driver can also be built as a module. If so, the module will > - be called nvmem-apple-efuses. > - > -config NVMEM_U_BOOT_ENV > - tristate "U-Boot environment variables support" > - depends on OF && MTD > - select CRC32 > - help > - U-Boot stores its setup as environment variables. This driver adds > - support for verifying & exporting such data. It also exposes variables > - as NVMEM cells so they can be referenced by other drivers. > - > - Currently this drivers works only with env variables on top of MTD. > - > - If compiled as module it will be called nvmem_u-boot-env. > + will be called nvmem-uniphier-efuse. > > endif > diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile > index 399f9972d45b..53a6ca1d0e01 100644 > --- a/drivers/nvmem/Makefile > +++ b/drivers/nvmem/Makefile > @@ -7,67 +7,67 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o > nvmem_core-y := core.o > > # Devices > -obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o > -nvmem-bcm-ocotp-y := bcm-ocotp.o > -obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o > -nvmem-imx-iim-y := imx-iim.o > -obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > -nvmem-imx-ocotp-y := imx-ocotp.o > -obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o > -nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o > obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o > -nvmem_jz4780_efuse-y := jz4780-efuse.o > +nvmem_jz4780_efuse-y := jz4780-efuse.o > +obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o > +nvmem_meson_efuse-y := meson-efuse.o > +obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o > +nvmem_meson_mx_efuse-y := meson-mx-efuse.o > +obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o > +nvmem-microchip-otpc-y := microchip-otpc.o > +obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o > +nvmem_mtk-efuse-y := mtk-efuse.o > +obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o > +nvmem-apple-efuses-y := apple-efuses.o > +obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o > +nvmem-bcm-ocotp-y := bcm-ocotp.o > +obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o > +nvmem_brcm_nvram-y := brcm_nvram.o > +obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o > +nvmem-imx-iim-y := imx-iim.o > +obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o > +nvmem-imx-ocotp-y := imx-ocotp.o > +obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o > +nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o > +obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o > +nvmem-layerscape-sfp-y := layerscape-sfp.o > obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o > -nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o > -obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o > -nvmem_lpc18xx_otp-y := lpc18xx_otp.o > -obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o > -nvmem-mxs-ocotp-y := mxs-ocotp.o > +nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o > +obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o > +nvmem_lpc18xx_otp-y := lpc18xx_otp.o > +obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o > +nvmem-mxs-ocotp-y := mxs-ocotp.o > obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o > -nvmem-nintendo-otp-y := nintendo-otp.o > -obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o > -nvmem_mtk-efuse-y := mtk-efuse.o > -obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o > -nvmem_qfprom-y := qfprom.o > -obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o > -nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o > -obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o > -nvmem_rockchip_efuse-y := rockchip-efuse.o > -obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o > -nvmem-rockchip-otp-y := rockchip-otp.o > -obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o > -nvmem_stm32_romem-y := stm32-romem.o > -obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o > -nvmem_sunxi_sid-y := sunxi_sid.o > -obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o > -nvmem-uniphier-efuse-y := uniphier-efuse.o > -obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o > -nvmem-vf610-ocotp-y := vf610-ocotp.o > -obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o > -nvmem_meson_efuse-y := meson-efuse.o > -obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o > -nvmem_meson_mx_efuse-y := meson-mx-efuse.o > -obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o > -nvmem_snvs_lpgpr-y := snvs_lpgpr.o > -obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o > -nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o > -obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o > -nvmem-sc27xx-efuse-y := sc27xx-efuse.o > -obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o > -nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o > -obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o > -nvmem_sprd_efuse-y := sprd-efuse.o > -obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o > -nvmem-rmem-y := rmem.o > -obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o > -nvmem_brcm_nvram-y := brcm_nvram.o > -obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o > -nvmem-layerscape-sfp-y := layerscape-sfp.o > +nvmem-nintendo-otp-y := nintendo-otp.o > +obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o > +nvmem-rmem-y := rmem.o > +obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o > +nvmem_snvs_lpgpr-y := snvs_lpgpr.o > +obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o > +nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o > +obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o > +nvmem_stm32_romem-y := stm32-romem.o > obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o > -nvmem_sunplus_ocotp-y := sunplus-ocotp.o > -obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o > -nvmem-apple-efuses-y := apple-efuses.o > -obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o > -nvmem-microchip-otpc-y := microchip-otpc.o > -obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o > -nvmem_u-boot-env-y := u-boot-env.o > +nvmem_sunplus_ocotp-y := sunplus-ocotp.o > +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o > +nvmem_sunxi_sid-y := sunxi_sid.o > +obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o > +nvmem_u-boot-env-y := u-boot-env.o > +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o > +nvmem-vf610-ocotp-y := vf610-ocotp.o > +obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o > +nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o > +obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o > +nvmem_qfprom-y := qfprom.o > +obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o > +nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o > +obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o > +nvmem_rockchip_efuse-y := rockchip-efuse.o > +obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o > +nvmem-rockchip-otp-y := rockchip-otp.o > +obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o > +nvmem-sc27xx-efuse-y := sc27xx-efuse.o > +obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o > +nvmem_sprd_efuse-y := sprd-efuse.o > +obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o > +nvmem-uniphier-efuse-y := uniphier-efuse.o
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig index bab8a29c9861..cb4036f81a25 100644 --- a/drivers/nvmem/Kconfig +++ b/drivers/nvmem/Kconfig @@ -21,6 +21,90 @@ config NVMEM_SYSFS This interface is mostly used by userspace applications to read/write directly into nvmem. +# Devices + +config JZ4780_EFUSE + tristate "JZ4780 EFUSE Memory Support" + depends on MACH_INGENIC || COMPILE_TEST + depends on HAS_IOMEM + depends on OF + select REGMAP_MMIO + help + Say Y here to include support for JZ4780 efuse memory found on + all JZ4780 SoC based devices. + To compile this driver as a module, choose M here: the module + will be called nvmem_jz4780_efuse. + +config MESON_EFUSE + tristate "Amlogic Meson GX eFuse Support" + depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson GX SoCs. + + This driver can also be built as a module. If so, the module + will be called nvmem_meson_efuse. + +config MESON_MX_EFUSE + tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" + depends on ARCH_MESON || COMPILE_TEST + help + This is a driver to retrieve specific values from the eFuse found on + the Amlogic Meson6, Meson8 and Meson8b SoCs. + + This driver can also be built as a module. If so, the module + will be called nvmem_meson_mx_efuse. + +config MICROCHIP_OTPC + tristate "Microchip OTPC support" + depends on ARCH_AT91 || COMPILE_TEST + help + This driver enable the OTP controller available on Microchip SAMA7G5 + SoCs. It controlls the access to the OTP memory connected to it. + +config MTK_EFUSE + tristate "Mediatek SoCs EFUSE support" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_IOMEM + help + This is a driver to access hardware related data like sensor + calibration, HDMI impedance etc. + + This driver can also be built as a module. If so, the module + will be called efuse-mtk. + +config NVMEM_APPLE_EFUSES + tristate "Apple eFuse support" + depends on ARCH_APPLE || COMPILE_TEST + default ARCH_APPLE + help + Say y here to enable support for reading eFuses on Apple SoCs + such as the M1. These are e.g. used to store factory programmed + calibration data required for the PCIe or the USB-C PHY. + + This driver can also be built as a module. If so, the module will + be called nvmem-apple-efuses. + +config NVMEM_BCM_OCOTP + tristate "Broadcom On-Chip OTP Controller support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM + default ARCH_BCM_IPROC + help + Say y here to enable read/write access to the Broadcom OTP + controller. + + This driver can also be built as a module. If so, the module + will be called nvmem-bcm-ocotp. + +config NVMEM_BRCM_NVRAM + tristate "Broadcom's NVRAM support" + depends on ARCH_BCM_5301X || COMPILE_TEST + depends on HAS_IOMEM + help + This driver provides support for Broadcom's NVRAM that can be accessed + using I/O mapping. + config NVMEM_IMX_IIM tristate "i.MX IC Identification Module support" depends on ARCH_MXC || COMPILE_TEST @@ -52,17 +136,18 @@ config NVMEM_IMX_OCOTP_SCU This is a driver for the SCU On-Chip OTP Controller (OCOTP) available on i.MX8 SoCs. -config JZ4780_EFUSE - tristate "JZ4780 EFUSE Memory Support" - depends on MACH_INGENIC || COMPILE_TEST +config NVMEM_LAYERSCAPE_SFP + tristate "Layerscape SFP (Security Fuse Processor) support" + depends on ARCH_LAYERSCAPE || COMPILE_TEST depends on HAS_IOMEM - depends on OF select REGMAP_MMIO help - Say Y here to include support for JZ4780 efuse memory found on - all JZ4780 SoC based devices. - To compile this driver as a module, choose M here: the module - will be called nvmem_jz4780_efuse. + This driver provides support to read the eFuses on Freescale + Layerscape SoC's. For example, the vendor provides a per part + unique ID there. + + This driver can also be built as a module. If so, the module + will be called layerscape-sfp. config NVMEM_LPC18XX_EEPROM tristate "NXP LPC18XX EEPROM Memory Support" @@ -96,24 +181,6 @@ config NVMEM_MXS_OCOTP This driver can also be built as a module. If so, the module will be called nvmem-mxs-ocotp. -config MTK_EFUSE - tristate "Mediatek SoCs EFUSE support" - depends on ARCH_MEDIATEK || COMPILE_TEST - depends on HAS_IOMEM - help - This is a driver to access hardware related data like sensor - calibration, HDMI impedance etc. - - This driver can also be built as a module. If so, the module - will be called efuse-mtk. - -config MICROCHIP_OTPC - tristate "Microchip OTPC support" - depends on ARCH_AT91 || COMPILE_TEST - help - This driver enable the OTP controller available on Microchip SAMA7G5 - SoCs. It controlls the access to the OTP memory connected to it. - config NVMEM_NINTENDO_OTP tristate "Nintendo Wii and Wii U OTP Support" depends on WII || COMPILE_TEST @@ -126,16 +193,25 @@ config NVMEM_NINTENDO_OTP This driver can also be built as a module. If so, the module will be called nvmem-nintendo-otp. -config QCOM_QFPROM - tristate "QCOM QFPROM Support" - depends on ARCH_QCOM || COMPILE_TEST +config NVMEM_RMEM + tristate "Reserved Memory Based Driver Support" depends on HAS_IOMEM help - Say y here to enable QFPROM support. The QFPROM provides access - functions for QFPROM data to rest of the drivers via nvmem interface. + This driver maps reserved memory into an nvmem device. It might be + useful to expose information left by firmware in memory. This driver can also be built as a module. If so, the module - will be called nvmem_qfprom. + will be called nvmem-rmem. + +config NVMEM_SNVS_LPGPR + tristate "Support for Low Power General Purpose Register" + depends on ARCH_MXC || COMPILE_TEST + help + This is a driver for Low Power General Purpose Register (LPGPR) available on + i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. + + This driver can also be built as a module. If so, the module + will be called nvmem-snvs-lpgpr. config NVMEM_SPMI_SDAM tristate "SPMI SDAM Support" @@ -145,40 +221,6 @@ config NVMEM_SPMI_SDAM Qualcomm Technologies, Inc. PMICs. It provides the clients an interface to read/write to the SDAM module's shared memory. -config ROCKCHIP_EFUSE - tristate "Rockchip eFuse Support" - depends on ARCH_ROCKCHIP || COMPILE_TEST - depends on HAS_IOMEM - help - This is a simple drive to dump specified values of Rockchip SoC - from eFuse, such as cpu-leakage. - - This driver can also be built as a module. If so, the module - will be called nvmem_rockchip_efuse. - -config ROCKCHIP_OTP - tristate "Rockchip OTP controller support" - depends on ARCH_ROCKCHIP || COMPILE_TEST - depends on HAS_IOMEM - help - This is a simple drive to dump specified values of Rockchip SoC - from otp, such as cpu-leakage. - - This driver can also be built as a module. If so, the module - will be called nvmem_rockchip_otp. - -config NVMEM_BCM_OCOTP - tristate "Broadcom On-Chip OTP Controller support" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM - default ARCH_BCM_IPROC - help - Say y here to enable read/write access to the Broadcom OTP - controller. - - This driver can also be built as a module. If so, the module - will be called nvmem-bcm-ocotp. - config NVMEM_STM32_ROMEM tristate "STMicroelectronics STM32 factory-programmed memory support" depends on ARCH_STM32 || COMPILE_TEST @@ -189,6 +231,18 @@ config NVMEM_STM32_ROMEM This driver can also be built as a module. If so, the module will be called nvmem-stm32-romem. +config NVMEM_SUNPLUS_OCOTP + tristate "Sunplus SoC OTP support" + depends on SOC_SP7021 || COMPILE_TEST + depends on HAS_IOMEM + help + This is a driver for the On-chip OTP controller (OCOTP) available + on Sunplus SoCs. It provides access to 128 bytes of one-time + programmable eFuse. + + This driver can also be built as a module. If so, the module + will be called nvmem-sunplus-ocotp. + config NVMEM_SUNXI_SID tristate "Allwinner SoCs SID support" depends on ARCH_SUNXI @@ -199,16 +253,18 @@ config NVMEM_SUNXI_SID This driver can also be built as a module. If so, the module will be called nvmem_sunxi_sid. -config UNIPHIER_EFUSE - tristate "UniPhier SoCs eFuse support" - depends on ARCH_UNIPHIER || COMPILE_TEST - depends on HAS_IOMEM +config NVMEM_U_BOOT_ENV + tristate "U-Boot environment variables support" + depends on OF && MTD + select CRC32 help - This is a simple driver to dump specified values of UniPhier SoC - from eFuse. + U-Boot stores its setup as environment variables. This driver adds + support for verifying & exporting such data. It also exposes variables + as NVMEM cells so they can be referenced by other drivers. - This driver can also be built as a module. If so, the module - will be called nvmem-uniphier-efuse. + Currently this drivers works only with env variables on top of MTD. + + If compiled as module it will be called nvmem_u-boot-env. config NVMEM_VF610_OCOTP tristate "VF610 SoC OCOTP support" @@ -221,35 +277,26 @@ config NVMEM_VF610_OCOTP This driver can also be build as a module. If so, the module will be called nvmem-vf610-ocotp. -config MESON_EFUSE - tristate "Amlogic Meson GX eFuse Support" - depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM - help - This is a driver to retrieve specific values from the eFuse found on - the Amlogic Meson GX SoCs. - - This driver can also be built as a module. If so, the module - will be called nvmem_meson_efuse. - -config MESON_MX_EFUSE - tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support" - depends on ARCH_MESON || COMPILE_TEST +config NVMEM_ZYNQMP + bool "Xilinx ZYNQMP SoC nvmem firmware support" + depends on ARCH_ZYNQMP help - This is a driver to retrieve specific values from the eFuse found on - the Amlogic Meson6, Meson8 and Meson8b SoCs. + This is a driver to access hardware related data like + soc revision, IDCODE... etc by using the firmware + interface. - This driver can also be built as a module. If so, the module - will be called nvmem_meson_mx_efuse. + If sure, say yes. If unsure, say no. -config NVMEM_SNVS_LPGPR - tristate "Support for Low Power General Purpose Register" - depends on ARCH_MXC || COMPILE_TEST +config QCOM_QFPROM + tristate "QCOM QFPROM Support" + depends on ARCH_QCOM || COMPILE_TEST + depends on HAS_IOMEM help - This is a driver for Low Power General Purpose Register (LPGPR) available on - i.MX6 and i.MX7 SoCs in Secure Non-Volatile Storage (SNVS) of this chip. + Say y here to enable QFPROM support. The QFPROM provides access + functions for QFPROM data to rest of the drivers via nvmem interface. This driver can also be built as a module. If so, the module - will be called nvmem-snvs-lpgpr. + will be called nvmem_qfprom. config RAVE_SP_EEPROM tristate "Rave SP EEPROM Support" @@ -257,6 +304,28 @@ config RAVE_SP_EEPROM help Say y here to enable Rave SP EEPROM support. +config ROCKCHIP_EFUSE + tristate "Rockchip eFuse Support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on HAS_IOMEM + help + This is a simple drive to dump specified values of Rockchip SoC + from eFuse, such as cpu-leakage. + + This driver can also be built as a module. If so, the module + will be called nvmem_rockchip_efuse. + +config ROCKCHIP_OTP + tristate "Rockchip OTP controller support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + depends on HAS_IOMEM + help + This is a simple drive to dump specified values of Rockchip SoC + from otp, such as cpu-leakage. + + This driver can also be built as a module. If so, the module + will be called nvmem_rockchip_otp. + config SC27XX_EFUSE tristate "Spreadtrum SC27XX eFuse Support" depends on MFD_SC27XX_PMIC || COMPILE_TEST @@ -268,16 +337,6 @@ config SC27XX_EFUSE This driver can also be built as a module. If so, the module will be called nvmem-sc27xx-efuse. -config NVMEM_ZYNQMP - bool "Xilinx ZYNQMP SoC nvmem firmware support" - depends on ARCH_ZYNQMP - help - This is a driver to access hardware related data like - soc revision, IDCODE... etc by using the firmware - interface. - - If sure, say yes. If unsure, say no. - config SPRD_EFUSE tristate "Spreadtrum SoC eFuse Support" depends on ARCH_SPRD || COMPILE_TEST @@ -289,72 +348,15 @@ config SPRD_EFUSE This driver can also be built as a module. If so, the module will be called nvmem-sprd-efuse. -config NVMEM_RMEM - tristate "Reserved Memory Based Driver Support" - depends on HAS_IOMEM - help - This driver maps reserved memory into an nvmem device. It might be - useful to expose information left by firmware in memory. - - This driver can also be built as a module. If so, the module - will be called nvmem-rmem. - -config NVMEM_BRCM_NVRAM - tristate "Broadcom's NVRAM support" - depends on ARCH_BCM_5301X || COMPILE_TEST - depends on HAS_IOMEM - help - This driver provides support for Broadcom's NVRAM that can be accessed - using I/O mapping. - -config NVMEM_LAYERSCAPE_SFP - tristate "Layerscape SFP (Security Fuse Processor) support" - depends on ARCH_LAYERSCAPE || COMPILE_TEST - depends on HAS_IOMEM - select REGMAP_MMIO - help - This driver provides support to read the eFuses on Freescale - Layerscape SoC's. For example, the vendor provides a per part - unique ID there. - - This driver can also be built as a module. If so, the module - will be called layerscape-sfp. - -config NVMEM_SUNPLUS_OCOTP - tristate "Sunplus SoC OTP support" - depends on SOC_SP7021 || COMPILE_TEST +config UNIPHIER_EFUSE + tristate "UniPhier SoCs eFuse support" + depends on ARCH_UNIPHIER || COMPILE_TEST depends on HAS_IOMEM help - This is a driver for the On-chip OTP controller (OCOTP) available - on Sunplus SoCs. It provides access to 128 bytes of one-time - programmable eFuse. + This is a simple driver to dump specified values of UniPhier SoC + from eFuse. This driver can also be built as a module. If so, the module - will be called nvmem-sunplus-ocotp. - -config NVMEM_APPLE_EFUSES - tristate "Apple eFuse support" - depends on ARCH_APPLE || COMPILE_TEST - default ARCH_APPLE - help - Say y here to enable support for reading eFuses on Apple SoCs - such as the M1. These are e.g. used to store factory programmed - calibration data required for the PCIe or the USB-C PHY. - - This driver can also be built as a module. If so, the module will - be called nvmem-apple-efuses. - -config NVMEM_U_BOOT_ENV - tristate "U-Boot environment variables support" - depends on OF && MTD - select CRC32 - help - U-Boot stores its setup as environment variables. This driver adds - support for verifying & exporting such data. It also exposes variables - as NVMEM cells so they can be referenced by other drivers. - - Currently this drivers works only with env variables on top of MTD. - - If compiled as module it will be called nvmem_u-boot-env. + will be called nvmem-uniphier-efuse. endif diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile index 399f9972d45b..53a6ca1d0e01 100644 --- a/drivers/nvmem/Makefile +++ b/drivers/nvmem/Makefile @@ -7,67 +7,67 @@ obj-$(CONFIG_NVMEM) += nvmem_core.o nvmem_core-y := core.o # Devices -obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o -nvmem-bcm-ocotp-y := bcm-ocotp.o -obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o -nvmem-imx-iim-y := imx-iim.o -obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o -nvmem-imx-ocotp-y := imx-ocotp.o -obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o -nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o obj-$(CONFIG_JZ4780_EFUSE) += nvmem_jz4780_efuse.o -nvmem_jz4780_efuse-y := jz4780-efuse.o +nvmem_jz4780_efuse-y := jz4780-efuse.o +obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o +nvmem_meson_efuse-y := meson-efuse.o +obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o +nvmem_meson_mx_efuse-y := meson-mx-efuse.o +obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o +nvmem-microchip-otpc-y := microchip-otpc.o +obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o +nvmem_mtk-efuse-y := mtk-efuse.o +obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o +nvmem-apple-efuses-y := apple-efuses.o +obj-$(CONFIG_NVMEM_BCM_OCOTP) += nvmem-bcm-ocotp.o +nvmem-bcm-ocotp-y := bcm-ocotp.o +obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o +nvmem_brcm_nvram-y := brcm_nvram.o +obj-$(CONFIG_NVMEM_IMX_IIM) += nvmem-imx-iim.o +nvmem-imx-iim-y := imx-iim.o +obj-$(CONFIG_NVMEM_IMX_OCOTP) += nvmem-imx-ocotp.o +nvmem-imx-ocotp-y := imx-ocotp.o +obj-$(CONFIG_NVMEM_IMX_OCOTP_SCU) += nvmem-imx-ocotp-scu.o +nvmem-imx-ocotp-scu-y := imx-ocotp-scu.o +obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o +nvmem-layerscape-sfp-y := layerscape-sfp.o obj-$(CONFIG_NVMEM_LPC18XX_EEPROM) += nvmem_lpc18xx_eeprom.o -nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o -obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o -nvmem_lpc18xx_otp-y := lpc18xx_otp.o -obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o -nvmem-mxs-ocotp-y := mxs-ocotp.o +nvmem_lpc18xx_eeprom-y := lpc18xx_eeprom.o +obj-$(CONFIG_NVMEM_LPC18XX_OTP) += nvmem_lpc18xx_otp.o +nvmem_lpc18xx_otp-y := lpc18xx_otp.o +obj-$(CONFIG_NVMEM_MXS_OCOTP) += nvmem-mxs-ocotp.o +nvmem-mxs-ocotp-y := mxs-ocotp.o obj-$(CONFIG_NVMEM_NINTENDO_OTP) += nvmem-nintendo-otp.o -nvmem-nintendo-otp-y := nintendo-otp.o -obj-$(CONFIG_MTK_EFUSE) += nvmem_mtk-efuse.o -nvmem_mtk-efuse-y := mtk-efuse.o -obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o -nvmem_qfprom-y := qfprom.o -obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o -nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o -obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o -nvmem_rockchip_efuse-y := rockchip-efuse.o -obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o -nvmem-rockchip-otp-y := rockchip-otp.o -obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o -nvmem_stm32_romem-y := stm32-romem.o -obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o -nvmem_sunxi_sid-y := sunxi_sid.o -obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o -nvmem-uniphier-efuse-y := uniphier-efuse.o -obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o -nvmem-vf610-ocotp-y := vf610-ocotp.o -obj-$(CONFIG_MESON_EFUSE) += nvmem_meson_efuse.o -nvmem_meson_efuse-y := meson-efuse.o -obj-$(CONFIG_MESON_MX_EFUSE) += nvmem_meson_mx_efuse.o -nvmem_meson_mx_efuse-y := meson-mx-efuse.o -obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o -nvmem_snvs_lpgpr-y := snvs_lpgpr.o -obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o -nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o -obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o -nvmem-sc27xx-efuse-y := sc27xx-efuse.o -obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o -nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o -obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o -nvmem_sprd_efuse-y := sprd-efuse.o -obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o -nvmem-rmem-y := rmem.o -obj-$(CONFIG_NVMEM_BRCM_NVRAM) += nvmem_brcm_nvram.o -nvmem_brcm_nvram-y := brcm_nvram.o -obj-$(CONFIG_NVMEM_LAYERSCAPE_SFP) += nvmem-layerscape-sfp.o -nvmem-layerscape-sfp-y := layerscape-sfp.o +nvmem-nintendo-otp-y := nintendo-otp.o +obj-$(CONFIG_NVMEM_RMEM) += nvmem-rmem.o +nvmem-rmem-y := rmem.o +obj-$(CONFIG_NVMEM_SNVS_LPGPR) += nvmem_snvs_lpgpr.o +nvmem_snvs_lpgpr-y := snvs_lpgpr.o +obj-$(CONFIG_NVMEM_SPMI_SDAM) += nvmem_qcom-spmi-sdam.o +nvmem_qcom-spmi-sdam-y += qcom-spmi-sdam.o +obj-$(CONFIG_NVMEM_STM32_ROMEM) += nvmem_stm32_romem.o +nvmem_stm32_romem-y := stm32-romem.o obj-$(CONFIG_NVMEM_SUNPLUS_OCOTP) += nvmem_sunplus_ocotp.o -nvmem_sunplus_ocotp-y := sunplus-ocotp.o -obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o -nvmem-apple-efuses-y := apple-efuses.o -obj-$(CONFIG_MICROCHIP_OTPC) += nvmem-microchip-otpc.o -nvmem-microchip-otpc-y := microchip-otpc.o -obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o -nvmem_u-boot-env-y := u-boot-env.o +nvmem_sunplus_ocotp-y := sunplus-ocotp.o +obj-$(CONFIG_NVMEM_SUNXI_SID) += nvmem_sunxi_sid.o +nvmem_sunxi_sid-y := sunxi_sid.o +obj-$(CONFIG_NVMEM_U_BOOT_ENV) += nvmem_u-boot-env.o +nvmem_u-boot-env-y := u-boot-env.o +obj-$(CONFIG_NVMEM_VF610_OCOTP) += nvmem-vf610-ocotp.o +nvmem-vf610-ocotp-y := vf610-ocotp.o +obj-$(CONFIG_NVMEM_ZYNQMP) += nvmem_zynqmp_nvmem.o +nvmem_zynqmp_nvmem-y := zynqmp_nvmem.o +obj-$(CONFIG_QCOM_QFPROM) += nvmem_qfprom.o +nvmem_qfprom-y := qfprom.o +obj-$(CONFIG_RAVE_SP_EEPROM) += nvmem-rave-sp-eeprom.o +nvmem-rave-sp-eeprom-y := rave-sp-eeprom.o +obj-$(CONFIG_ROCKCHIP_EFUSE) += nvmem_rockchip_efuse.o +nvmem_rockchip_efuse-y := rockchip-efuse.o +obj-$(CONFIG_ROCKCHIP_OTP) += nvmem-rockchip-otp.o +nvmem-rockchip-otp-y := rockchip-otp.o +obj-$(CONFIG_SC27XX_EFUSE) += nvmem-sc27xx-efuse.o +nvmem-sc27xx-efuse-y := sc27xx-efuse.o +obj-$(CONFIG_SPRD_EFUSE) += nvmem_sprd_efuse.o +nvmem_sprd_efuse-y := sprd-efuse.o +obj-$(CONFIG_UNIPHIER_EFUSE) += nvmem-uniphier-efuse.o +nvmem-uniphier-efuse-y := uniphier-efuse.o