| Message ID | 20220829080830.5378-2-chunfeng.yun@mediatek.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2,1/7] dt-bindings: phy: mediatek,tphy: add support type of SGMII | expand |
On 29/08/2022 11:08, Chunfeng Yun wrote: > Add a property to set usb2 phy's pre-emphasis, which used to widen eye > opening and boost eye swing. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v2: Add more description suggested by Krzysztof > --- > .../devicetree/bindings/phy/mediatek,tphy.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > index 848edfb1f677..e0754fb44451 100644 > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > @@ -219,6 +219,16 @@ patternProperties: > minimum: 1 > maximum: 15 > > + mediatek,pre-emphasis: > + description: > + The level of pre-emphasis which used to widen the eye opening and > + boost eye swing, the unit step is about 4.16% increment; e.g. the > + level 1 means amplitude increases about 4.16%, the level 2 is about > + 8.3% etc. (U2 phy) > + $ref: /schemas/types.yaml#/definitions/uint32 As I proposed - use instead common units. Since only three values are allowed - make it an enum. These bindings are expected to be usable/applicable on several devices, so units, not register values which can change between devices, are the proper and reliable way to describe a feature. Best regards, Krzysztof
On Tue, 2022-08-30 at 20:38 +0300, Krzysztof Kozlowski wrote: > On 29/08/2022 11:08, Chunfeng Yun wrote: > > Add a property to set usb2 phy's pre-emphasis, which used to widen > > eye > > opening and boost eye swing. > > > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > --- > > v2: Add more description suggested by Krzysztof > > --- > > .../devicetree/bindings/phy/mediatek,tphy.yaml | 10 > > ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > index 848edfb1f677..e0754fb44451 100644 > > --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml > > @@ -219,6 +219,16 @@ patternProperties: > > minimum: 1 > > maximum: 15 > > > > + mediatek,pre-emphasis: > > + description: > > + The level of pre-emphasis which used to widen the eye > > opening and > > + boost eye swing, the unit step is about 4.16% increment; > > e.g. the > > + level 1 means amplitude increases about 4.16%, the level > > 2 is about > > + 8.3% etc. (U2 phy) > > + $ref: /schemas/types.yaml#/definitions/uint32 > > As I proposed - use instead common units. As explained before, no units for these value. > Since only three values are > allowed - make it an enum. Ok, > These bindings are expected to be > usable/applicable on several devices, so units, not register values > which can change between devices, are the proper and reliable way to > describe a feature. I prefer to use exact level values, but not the inexact values with units (e.g. -percent, -microvolt). Thanks a lot > > > Best regards, > Krzysztof
On 31/08/2022 06:14, Chunfeng Yun wrote: >> These bindings are expected to be >> usable/applicable on several devices, so units, not register values >> which can change between devices, are the proper and reliable way to >> describe a feature. > I prefer to use exact level values, but not the inexact values with > units (e.g. -percent, -microvolt). What stops you from using exact values - bp? Best regards, Krzysztof
On Wed, 2022-08-31 at 09:02 +0300, Krzysztof Kozlowski wrote: > On 31/08/2022 06:14, Chunfeng Yun wrote: > > > These bindings are expected to be > > > usable/applicable on several devices, so units, not register > > > values > > > which can change between devices, are the proper and reliable way > > > to > > > describe a feature. > > > > I prefer to use exact level values, but not the inexact values with > > units (e.g. -percent, -microvolt). > > What stops you from using exact values - bp? See reply for the first series, thanks > > Best regards, > Krzysztof
On 09/09/2022 05:07, Chunfeng Yun wrote: > On Wed, 2022-08-31 at 09:02 +0300, Krzysztof Kozlowski wrote: >> On 31/08/2022 06:14, Chunfeng Yun wrote: >>>> These bindings are expected to be >>>> usable/applicable on several devices, so units, not register >>>> values >>>> which can change between devices, are the proper and reliable way >>>> to >>>> describe a feature. >>> >>> I prefer to use exact level values, but not the inexact values with >>> units (e.g. -percent, -microvolt). >> >> What stops you from using exact values - bp? > See reply for the first series, thanks Not in my inbox anymore. Best regards, Krzysztof
On 29/08/2022 10:08, Chunfeng Yun wrote: > Add a property to set usb2 phy's pre-emphasis, which used to widen eye > opening and boost eye swing. > > Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > --- > v2: Add more description suggested by Krzysztof > --- > .../devicetree/bindings/phy/mediatek,tphy.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 848edfb1f677..e0754fb44451 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -219,6 +219,16 @@ patternProperties: minimum: 1 maximum: 15 + mediatek,pre-emphasis: + description: + The level of pre-emphasis which used to widen the eye opening and + boost eye swing, the unit step is about 4.16% increment; e.g. the + level 1 means amplitude increases about 4.16%, the level 2 is about + 8.3% etc. (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 3 + mediatek,bc12: description: Specify the flag to enable BC1.2 if support it
Add a property to set usb2 phy's pre-emphasis, which used to widen eye opening and boost eye swing. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- v2: Add more description suggested by Krzysztof --- .../devicetree/bindings/phy/mediatek,tphy.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)