[v5,0/5] RK3568 PCIe V3 support

Message

Frank Wunderlich Aug. 25, 2022, 7:38 p.m. UTC

From: Frank Wunderlich <[e-mail]>

This series adds Rockchip PCIe V3 support found on rk3568 SOC.

Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
PCI-phy.

Frank Wunderlich (4):
  dt-bindings: phy: rockchip: add PCIe v3 phy
  dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
  arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
  arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro

Shawn Lin (1):
  phy: rockchip: Support PCIe v3

 .../bindings/phy/rockchip,pcie3-phy.yaml      |  80 +++++
 .../devicetree/bindings/soc/rockchip/grf.yaml |   3 +
 .../boot/dts/rockchip/rk3568-bpi-r2-pro.dts   | 117 +++++++
 arch/arm64/boot/dts/rockchip/rk3568.dtsi      | 122 +++++++
 drivers/phy/rockchip/Kconfig                  |   9 +
 drivers/phy/rockchip/Makefile                 |   1 +
 .../phy/rockchip/phy-rockchip-snps-pcie3.c    | 319 ++++++++++++++++++
 include/linux/phy/pcie.h                      |  12 +
 8 files changed, 663 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
 create mode 100644 drivers/phy/rockchip/phy-rockchip-snps-pcie3.c
 create mode 100644 include/linux/phy/pcie.h

Comments

Heiko Stübner Sept. 4, 2022, 5:22 p.m. UTC | #1

On Thu, 25 Aug 2022 21:38:31 +0200, Frank Wunderlich wrote:
> This series adds Rockchip PCIe V3 support found on rk3568 SOC.
> 
> Compared to PCIeV2 which uses the Naneng combphy, PCIe v3 uses a dedicated
> PCI-phy.
> 
> Frank Wunderlich (4):
>   dt-bindings: phy: rockchip: add PCIe v3 phy
>   dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
>   arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
>   arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
> 
> [...]

Applied, thanks!

[2/5] dt-bindings: soc: grf: add pcie30-{phy,pipe}-grf
      commit: 4e441643b32249b4dac89be063255957f3d2938c
[4/5] arm64: dts: rockchip: rk3568: Add PCIe v3 nodes
      commit: faedfa5b40f095d09040c3a040e2f8dee4a36b4b
[5/5] arm64: dts: rockchip: Add PCIe v3 nodes to BPI-R2-Pro
      commit: 86973ae0355bc302d5e4c10fa382f6801feb4b90

As stated in the separate mail, I've added the -regulator
suffixes to the regulator node names.


Best regards,