Message ID | 20220831161736.749932-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
---|---|
State | Rejected |
Headers | show |
Series | remoteproc: report firmware name on load failures | expand |
hi, On 8/31/2022 9:47 PM, Krzysztof Kozlowski wrote: > remoteproc error messages like: > remoteproc remoteproc0: request_firmware failed: -2 > remoteproc remoteproc1: request_firmware failed: -2 > are difficult to debug as one actually have no clue which device > reported it and which firmware is missing. Be verbose and print the > name of the failed firmware. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > drivers/remoteproc/remoteproc_core.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index e5279ed9a8d7..71cd7ed7a970 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -1923,7 +1923,8 @@ int rproc_trigger_recovery(struct rproc *rproc) > /* load firmware */ > ret = request_firmware(&firmware_p, rproc->firmware, dev); > if (ret < 0) { > - dev_err(dev, "request_firmware failed: %d\n", ret); > + dev_err(dev, "request_firmware %s failed: %d\n", > + rproc->firmware, ret); > goto unlock_mutex; > } > > @@ -2023,7 +2024,8 @@ int rproc_boot(struct rproc *rproc) > /* load firmware */ > ret = request_firmware(&firmware_p, rproc->firmware, dev); > if (ret < 0) { > - dev_err(dev, "request_firmware failed: %d\n", ret); > + dev_err(dev, "request_firmware %s failed: %d\n", > + rproc->firmware, ret); Good to have this. Acked-by: Mukesh Ojha <quic_mojha@quicinc.com> > goto downref_rproc; > } > -Mukesh
On Wed, Aug 31, 2022 at 07:17:36PM +0300, Krzysztof Kozlowski wrote: > remoteproc error messages like: > remoteproc remoteproc0: request_firmware failed: -2 > remoteproc remoteproc1: request_firmware failed: -2 > are difficult to debug as one actually have no clue which device > reported it and which firmware is missing. Be verbose and print the > name of the failed firmware. > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > drivers/remoteproc/remoteproc_core.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c > index e5279ed9a8d7..71cd7ed7a970 100644 > --- a/drivers/remoteproc/remoteproc_core.c > +++ b/drivers/remoteproc/remoteproc_core.c > @@ -1923,7 +1923,8 @@ int rproc_trigger_recovery(struct rproc *rproc) > /* load firmware */ > ret = request_firmware(&firmware_p, rproc->firmware, dev); > if (ret < 0) { > - dev_err(dev, "request_firmware failed: %d\n", ret); > + dev_err(dev, "request_firmware %s failed: %d\n", > + rproc->firmware, ret); > goto unlock_mutex; > } > > @@ -2023,7 +2024,8 @@ int rproc_boot(struct rproc *rproc) > /* load firmware */ > ret = request_firmware(&firmware_p, rproc->firmware, dev); > if (ret < 0) { > - dev_err(dev, "request_firmware failed: %d\n", ret); > + dev_err(dev, "request_firmware %s failed: %d\n", > + rproc->firmware, ret); That information is already available in sysfs but if you are really keen on it please do the same for rproc_trigger_auto_boot(). Thanks, Mathieu > goto downref_rproc; > } > > -- > 2.34.1 >
On 06/09/2022 21:46, Mathieu Poirier wrote: > On Wed, Aug 31, 2022 at 07:17:36PM +0300, Krzysztof Kozlowski wrote: >> remoteproc error messages like: >> remoteproc remoteproc0: request_firmware failed: -2 >> remoteproc remoteproc1: request_firmware failed: -2 >> are difficult to debug as one actually have no clue which device >> reported it and which firmware is missing. Be verbose and print the >> name of the failed firmware. >> >> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >> --- >> drivers/remoteproc/remoteproc_core.c | 6 ++++-- >> 1 file changed, 4 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c >> index e5279ed9a8d7..71cd7ed7a970 100644 >> --- a/drivers/remoteproc/remoteproc_core.c >> +++ b/drivers/remoteproc/remoteproc_core.c >> @@ -1923,7 +1923,8 @@ int rproc_trigger_recovery(struct rproc *rproc) >> /* load firmware */ >> ret = request_firmware(&firmware_p, rproc->firmware, dev); >> if (ret < 0) { >> - dev_err(dev, "request_firmware failed: %d\n", ret); >> + dev_err(dev, "request_firmware %s failed: %d\n", >> + rproc->firmware, ret); >> goto unlock_mutex; >> } >> >> @@ -2023,7 +2024,8 @@ int rproc_boot(struct rproc *rproc) >> /* load firmware */ >> ret = request_firmware(&firmware_p, rproc->firmware, dev); >> if (ret < 0) { >> - dev_err(dev, "request_firmware failed: %d\n", ret); >> + dev_err(dev, "request_firmware %s failed: %d\n", >> + rproc->firmware, ret); > > That information is already available in sysfs Hm, it's not in deferred probe reasons, so where can I find it in sysfs? > but if you are really keen on it > please do the same for rproc_trigger_auto_boot(). Sure. Best regards, Krzysztof
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index e5279ed9a8d7..71cd7ed7a970 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -1923,7 +1923,8 @@ int rproc_trigger_recovery(struct rproc *rproc) /* load firmware */ ret = request_firmware(&firmware_p, rproc->firmware, dev); if (ret < 0) { - dev_err(dev, "request_firmware failed: %d\n", ret); + dev_err(dev, "request_firmware %s failed: %d\n", + rproc->firmware, ret); goto unlock_mutex; } @@ -2023,7 +2024,8 @@ int rproc_boot(struct rproc *rproc) /* load firmware */ ret = request_firmware(&firmware_p, rproc->firmware, dev); if (ret < 0) { - dev_err(dev, "request_firmware failed: %d\n", ret); + dev_err(dev, "request_firmware %s failed: %d\n", + rproc->firmware, ret); goto downref_rproc; }
remoteproc error messages like: remoteproc remoteproc0: request_firmware failed: -2 remoteproc remoteproc1: request_firmware failed: -2 are difficult to debug as one actually have no clue which device reported it and which firmware is missing. Be verbose and print the name of the failed firmware. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- drivers/remoteproc/remoteproc_core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)