| Message ID | 20220725191314.19456-2-quic_amelende@quicinc.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | add support for PON GEN3 device | expand |
On 25/07/2022 21:13, Anjelique Melendez wrote: > From: David Collins <quic_collinsd@quicinc.com> > > Update the description of "reg" property to add the PON_PBS base > address along with PON_HLOS base address. Also add "reg-names" > property constraints. > > Signed-off-by: David Collins <quic_collinsd@quicinc.com> > Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> > --- > Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 50 +++++++++++++++++++++++++++--- > 1 file changed, 46 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > index 353f155d..d7b6b875 100644 > --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml > @@ -15,18 +15,27 @@ description: | > > This DT node has pwrkey and resin as sub nodes. > > -allOf: > - - $ref: reboot-mode.yaml# > - > properties: > compatible: > enum: > - qcom,pm8916-pon > - qcom,pms405-pon > - qcom,pm8998-pon > + - qcom,pmk8350-pon > > reg: > - maxItems: 1 > + description: | > + Specifies the SPMI base address for the PON (power-on) peripheral. For > + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS > + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS > + peripherals. In that case, the PON_PBS address needs to be specified to > + facilitate software debouncing on some PMIC. > + minItems: 1 > + maxItems: 2 > + > + reg-names: > + minItems: 1 > + maxItems: 2 > > pwrkey: > type: object > @@ -42,6 +51,39 @@ required: > > unevaluatedProperties: false > > +allOf: > + - $ref: reboot-mode.yaml# > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,pm8916-pon > + - qcom,pms405-pon > + - qcom,pm8998-pon > + then: > + properties: > + reg: > + maxItems: 1 > + reg-names: > + items: > + - const: pon All your previous patches were actually missing (in commit msg, in the code) that piece of information which you add here. You now add reg-names with "pon" for older devices. I assumed previous that it is somehow needed, so I gave you the hints how it should be coded. But I don't understand - why are you doing it? This should be explained in commit msg. To me it is not needed at all... unless you want to mark that first address space is entirely different for other devices? > + - if: > + properties: > + compatible: > + contains: > + const: qcom,pmk8350-pon > + then: > + properties: > + reg: > + minItems: 1 > + maxItems: 2 > + reg-names: > + minItems: 1 > + items: > + - const: hlos > + - const: pbs > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> Best regards, Krzysztof
Hi Krzysztof, First I would like to apologize for my lack of response to this patch series over these past few weeks. I have been out of office. On 7/26/2022 3:25 AM, Krzysztof Kozlowski wrote: > On 25/07/2022 21:13, Anjelique Melendez wrote: >> From: David Collins <quic_collinsd@quicinc.com> >> >> Update the description of "reg" property to add the PON_PBS base >> address along with PON_HLOS base address. Also add "reg-names" >> property constraints. >> >> Signed-off-by: David Collins <quic_collinsd@quicinc.com> >> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> >> --- >> Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 50 +++++++++++++++++++++++++++--- >> 1 file changed, 46 insertions(+), 4 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >> index 353f155d..d7b6b875 100644 >> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >> @@ -15,18 +15,27 @@ description: | >> >> This DT node has pwrkey and resin as sub nodes. >> >> -allOf: >> - - $ref: reboot-mode.yaml# >> - >> properties: >> compatible: >> enum: >> - qcom,pm8916-pon >> - qcom,pms405-pon >> - qcom,pm8998-pon >> + - qcom,pmk8350-pon >> >> reg: >> - maxItems: 1 >> + description: | >> + Specifies the SPMI base address for the PON (power-on) peripheral. For >> + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS >> + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS >> + peripherals. In that case, the PON_PBS address needs to be specified to >> + facilitate software debouncing on some PMIC. >> + minItems: 1 >> + maxItems: 2 >> + >> + reg-names: >> + minItems: 1 >> + maxItems: 2 >> >> pwrkey: >> type: object >> @@ -42,6 +51,39 @@ required: >> >> unevaluatedProperties: false >> >> +allOf: >> + - $ref: reboot-mode.yaml# >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,pm8916-pon >> + - qcom,pms405-pon >> + - qcom,pm8998-pon >> + then: >> + properties: >> + reg: >> + maxItems: 1 >> + reg-names: >> + items: >> + - const: pon > > All your previous patches were actually missing (in commit msg, in the > code) that piece of information which you add here. You now add > reg-names with "pon" for older devices. I assumed previous that it is > somehow needed, so I gave you the hints how it should be coded. But I > don't understand - why are you doing it > > This should be explained in commit msg. To me it is not needed at all... > unless you want to mark that first address space is entirely different > for other devices? Adding reg-names "pon" for older devices is simply to provide clarification about what the register relates to. Similar to reg-names "hlos" and "pbs" for gen3 children devices, reg-names is completely optional and is not consumed by any driver. Before adding the "qcom,pmk8350-pon" compatible string, the best way to differentiate between a "qcom,pm8998-pon" parent with a gen1/gen2 child vs a "qcom,pm8998-pon" parent with a gen3 child with only an hlos register was to include reg-names. i.e. pon_hlos@1300 { reg = <0x1300>; compatible = "qcom,pm8998-pon"; reg-names = "pon"; }; vs pon_hlos@1300 { reg = <0x1300>; compatible = "qcom,pm8998-pon"; reg-names = "hlos"; }; Adding the new "qcom,pmk8350-pon" compatible string would now be used to differentiate between gen1/gen2 vs gen3 children, so we could get rid of the addition of reg-names for older devices. Similarly we could get rid of reg-names and the "qcom,pmk8350-pon" compatible string as a whole like mentioned in https://lore.kernel.org/all/99a5d9ac-9c20-b441-44af-26772a0e989d@linaro.org/, if reg-names and the new compatible string is causing too much confusion. Thanks, Anjelique > >> + - if: >> + properties: >> + compatible: >> + contains: >> + const: qcom,pmk8350-pon >> + then: >> + properties: >> + reg: >> + minItems: 1 >> + maxItems: 2 >> + reg-names: >> + minItems: 1 >> + items: >> + - const: hlos >> + - const: pbs >> + >> examples: >> - | >> #include <dt-bindings/interrupt-controller/irq.h> > > > Best regards, > Krzysztof
Hi, Wanted to send a reminder for this patch conversation. Thanks, Anjelique On 8/19/2022 1:26 PM, Anjelique Melendez wrote: > > Hi Krzysztof, > First I would like to apologize for my lack of response to this patch series > over these past few weeks. I have been out of office. > > On 7/26/2022 3:25 AM, Krzysztof Kozlowski wrote: >> On 25/07/2022 21:13, Anjelique Melendez wrote: >>> From: David Collins <quic_collinsd@quicinc.com> >>> >>> Update the description of "reg" property to add the PON_PBS base >>> address along with PON_HLOS base address. Also add "reg-names" >>> property constraints. >>> >>> Signed-off-by: David Collins <quic_collinsd@quicinc.com> >>> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> >>> --- >>> Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 50 +++++++++++++++++++++++++++--- >>> 1 file changed, 46 insertions(+), 4 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>> index 353f155d..d7b6b875 100644 >>> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>> @@ -15,18 +15,27 @@ description: | >>> >>> This DT node has pwrkey and resin as sub nodes. >>> >>> -allOf: >>> - - $ref: reboot-mode.yaml# >>> - >>> properties: >>> compatible: >>> enum: >>> - qcom,pm8916-pon >>> - qcom,pms405-pon >>> - qcom,pm8998-pon >>> + - qcom,pmk8350-pon >>> >>> reg: >>> - maxItems: 1 >>> + description: | >>> + Specifies the SPMI base address for the PON (power-on) peripheral. For >>> + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS >>> + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS >>> + peripherals. In that case, the PON_PBS address needs to be specified to >>> + facilitate software debouncing on some PMIC. >>> + minItems: 1 >>> + maxItems: 2 >>> + >>> + reg-names: >>> + minItems: 1 >>> + maxItems: 2 >>> >>> pwrkey: >>> type: object >>> @@ -42,6 +51,39 @@ required: >>> >>> unevaluatedProperties: false >>> >>> +allOf: >>> + - $ref: reboot-mode.yaml# >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - qcom,pm8916-pon >>> + - qcom,pms405-pon >>> + - qcom,pm8998-pon >>> + then: >>> + properties: >>> + reg: >>> + maxItems: 1 >>> + reg-names: >>> + items: >>> + - const: pon >> >> All your previous patches were actually missing (in commit msg, in the >> code) that piece of information which you add here. You now add >> reg-names with "pon" for older devices. I assumed previous that it is >> somehow needed, so I gave you the hints how it should be coded. But I >> don't understand - why are you doing it >> >> This should be explained in commit msg. To me it is not needed at all... >> unless you want to mark that first address space is entirely different >> for other devices? > Adding reg-names "pon" for older devices is simply to provide clarification > about what the register relates to. Similar to reg-names "hlos" and "pbs" > for gen3 children devices, reg-names is completely optional and is not > consumed by any driver. > > Before adding the "qcom,pmk8350-pon" compatible string, the best way to > differentiate between a "qcom,pm8998-pon" parent with a gen1/gen2 child vs a > "qcom,pm8998-pon" parent with a gen3 child with only an hlos register was to > include reg-names. i.e. > > pon_hlos@1300 { > reg = <0x1300>; > compatible = "qcom,pm8998-pon"; > reg-names = "pon"; > }; > > vs > > pon_hlos@1300 { > reg = <0x1300>; > compatible = "qcom,pm8998-pon"; > reg-names = "hlos"; > }; > > Adding the new "qcom,pmk8350-pon" compatible string would now be used to > differentiate between gen1/gen2 vs gen3 children, so we could get rid of the > addition of reg-names for older devices. > > > Similarly we could get rid of reg-names and the "qcom,pmk8350-pon" compatible > string as a whole like mentioned in > https://lore.kernel.org/all/99a5d9ac-9c20-b441-44af-26772a0e989d@linaro.org/, > if reg-names and the new compatible string is causing too much confusion. > > > Thanks, > Anjelique >> > >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + const: qcom,pmk8350-pon >>> + then: >>> + properties: >>> + reg: >>> + minItems: 1 >>> + maxItems: 2 >>> + reg-names: >>> + minItems: 1 >>> + items: >>> + - const: hlos >>> + - const: pbs >>> + >>> examples: >>> - | >>> #include <dt-bindings/interrupt-controller/irq.h> >> >> >> Best regards, >> Krzysztof
On 19/08/2022 22:26, Anjelique Melendez wrote: > > Hi Krzysztof, > First I would like to apologize for my lack of response to this patch series > over these past few weeks. I have been out of office. > > On 7/26/2022 3:25 AM, Krzysztof Kozlowski wrote: >> On 25/07/2022 21:13, Anjelique Melendez wrote: >>> From: David Collins <quic_collinsd@quicinc.com> >>> >>> Update the description of "reg" property to add the PON_PBS base >>> address along with PON_HLOS base address. Also add "reg-names" >>> property constraints. >>> >>> Signed-off-by: David Collins <quic_collinsd@quicinc.com> >>> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> >>> --- >>> Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 50 +++++++++++++++++++++++++++--- >>> 1 file changed, 46 insertions(+), 4 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>> index 353f155d..d7b6b875 100644 >>> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>> @@ -15,18 +15,27 @@ description: | >>> >>> This DT node has pwrkey and resin as sub nodes. >>> >>> -allOf: >>> - - $ref: reboot-mode.yaml# >>> - >>> properties: >>> compatible: >>> enum: >>> - qcom,pm8916-pon >>> - qcom,pms405-pon >>> - qcom,pm8998-pon >>> + - qcom,pmk8350-pon >>> >>> reg: >>> - maxItems: 1 >>> + description: | >>> + Specifies the SPMI base address for the PON (power-on) peripheral. For >>> + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS >>> + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS >>> + peripherals. In that case, the PON_PBS address needs to be specified to >>> + facilitate software debouncing on some PMIC. >>> + minItems: 1 >>> + maxItems: 2 >>> + >>> + reg-names: >>> + minItems: 1 >>> + maxItems: 2 >>> >>> pwrkey: >>> type: object >>> @@ -42,6 +51,39 @@ required: >>> >>> unevaluatedProperties: false >>> >>> +allOf: >>> + - $ref: reboot-mode.yaml# >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - qcom,pm8916-pon >>> + - qcom,pms405-pon >>> + - qcom,pm8998-pon >>> + then: >>> + properties: >>> + reg: >>> + maxItems: 1 >>> + reg-names: >>> + items: >>> + - const: pon >> >> All your previous patches were actually missing (in commit msg, in the >> code) that piece of information which you add here. You now add >> reg-names with "pon" for older devices. I assumed previous that it is >> somehow needed, so I gave you the hints how it should be coded. But I >> don't understand - why are you doing it >> >> This should be explained in commit msg. To me it is not needed at all... >> unless you want to mark that first address space is entirely different >> for other devices? > Adding reg-names "pon" for older devices is simply to provide clarification > about what the register relates to. Similar to reg-names "hlos" and "pbs" > for gen3 children devices, reg-names is completely optional and is not > consumed by any driver. OK, can be. Include it in the commit msg, please. Best regards, Krzysztof
On 9/8/2022 7:55 AM, Krzysztof Kozlowski wrote: > On 19/08/2022 22:26, Anjelique Melendez wrote: >> >> Hi Krzysztof, >> First I would like to apologize for my lack of response to this patch series >> over these past few weeks. I have been out of office. >> >> On 7/26/2022 3:25 AM, Krzysztof Kozlowski wrote: >>> On 25/07/2022 21:13, Anjelique Melendez wrote: >>>> From: David Collins <quic_collinsd@quicinc.com> >>>> >>>> Update the description of "reg" property to add the PON_PBS base >>>> address along with PON_HLOS base address. Also add "reg-names" >>>> property constraints. >>>> >>>> Signed-off-by: David Collins <quic_collinsd@quicinc.com> >>>> Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com> >>>> --- >>>> Documentation/devicetree/bindings/power/reset/qcom,pon.yaml | 50 +++++++++++++++++++++++++++--- >>>> 1 file changed, 46 insertions(+), 4 deletions(-) >>>> >>>> diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>>> index 353f155d..d7b6b875 100644 >>>> --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>>> +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml >>>> @@ -15,18 +15,27 @@ description: | >>>> >>>> This DT node has pwrkey and resin as sub nodes. >>>> >>>> -allOf: >>>> - - $ref: reboot-mode.yaml# >>>> - >>>> properties: >>>> compatible: >>>> enum: >>>> - qcom,pm8916-pon >>>> - qcom,pms405-pon >>>> - qcom,pm8998-pon >>>> + - qcom,pmk8350-pon >>>> >>>> reg: >>>> - maxItems: 1 >>>> + description: | >>>> + Specifies the SPMI base address for the PON (power-on) peripheral. For >>>> + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS >>>> + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS >>>> + peripherals. In that case, the PON_PBS address needs to be specified to >>>> + facilitate software debouncing on some PMIC. >>>> + minItems: 1 >>>> + maxItems: 2 >>>> + >>>> + reg-names: >>>> + minItems: 1 >>>> + maxItems: 2 >>>> >>>> pwrkey: >>>> type: object >>>> @@ -42,6 +51,39 @@ required: >>>> >>>> unevaluatedProperties: false >>>> >>>> +allOf: >>>> + - $ref: reboot-mode.yaml# >>>> + - if: >>>> + properties: >>>> + compatible: >>>> + contains: >>>> + enum: >>>> + - qcom,pm8916-pon >>>> + - qcom,pms405-pon >>>> + - qcom,pm8998-pon >>>> + then: >>>> + properties: >>>> + reg: >>>> + maxItems: 1 >>>> + reg-names: >>>> + items: >>>> + - const: pon >>> >>> All your previous patches were actually missing (in commit msg, in the >>> code) that piece of information which you add here. You now add >>> reg-names with "pon" for older devices. I assumed previous that it is >>> somehow needed, so I gave you the hints how it should be coded. But I >>> don't understand - why are you doing it >>> >>> This should be explained in commit msg. To me it is not needed at all... >>> unless you want to mark that first address space is entirely different >>> for other devices? >> Adding reg-names "pon" for older devices is simply to provide clarification >> about what the register relates to. Similar to reg-names "hlos" and "pbs" >> for gen3 children devices, reg-names is completely optional and is not >> consumed by any driver. > > OK, can be. Include it in the commit msg, please. ACK > > > Best regards, > Krzysztof
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml index 353f155d..d7b6b875 100644 --- a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml @@ -15,18 +15,27 @@ description: | This DT node has pwrkey and resin as sub nodes. -allOf: - - $ref: reboot-mode.yaml# - properties: compatible: enum: - qcom,pm8916-pon - qcom,pms405-pon - qcom,pm8998-pon + - qcom,pmk8350-pon reg: - maxItems: 1 + description: | + Specifies the SPMI base address for the PON (power-on) peripheral. For + PMICs that have the PON peripheral (GEN3) split into PON_HLOS and PON_PBS + (e.g. PMK8350), this can hold addresses of both PON_HLOS and PON_PBS + peripherals. In that case, the PON_PBS address needs to be specified to + facilitate software debouncing on some PMIC. + minItems: 1 + maxItems: 2 + + reg-names: + minItems: 1 + maxItems: 2 pwrkey: type: object @@ -42,6 +51,39 @@ required: unevaluatedProperties: false +allOf: + - $ref: reboot-mode.yaml# + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8916-pon + - qcom,pms405-pon + - qcom,pm8998-pon + then: + properties: + reg: + maxItems: 1 + reg-names: + items: + - const: pon + - if: + properties: + compatible: + contains: + const: qcom,pmk8350-pon + then: + properties: + reg: + minItems: 1 + maxItems: 2 + reg-names: + minItems: 1 + items: + - const: hlos + - const: pbs + examples: - | #include <dt-bindings/interrupt-controller/irq.h>