| Message ID | 1662626705-13097-2-git-send-email-quic_taozha@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support to configure TPDM DSB subunit | expand |
On 08/09/2022 10:44, Tao Zhang wrote: > Add property "qcom,dsb-elem-size" to support DSB element for TPDA. > Specifies the DSB element size supported by each monitor connected > to the aggregator on each port. Should be specified in pairs (port, > dsb element size). > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > --- > Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > index eb9bfc5..1bb3fdf 100644 > --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > @@ -40,6 +40,13 @@ properties: > minItems: 1 > maxItems: 2 > > + qcom,dsb-elem-size: > + description: | > + Specifies the DSB element size supported by each monitor > + connected to the aggregator on each port. Should be specified > + in pairs (port, dsb element size). > + $ref: /schemas/types.yaml#/definitions/uint32-array So it is rather uint32-matrix (need to describe the items subschema). What about maxItems? Best regards, Krzysztof
On Thu, Sep 08, 2022 at 04:44:57PM +0800, Tao Zhang wrote: > Add property "qcom,dsb-elem-size" to support DSB element for TPDA. > Specifies the DSB element size supported by each monitor connected > to the aggregator on each port. Should be specified in pairs (port, > dsb element size). What is DSB? > > Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> > --- > Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > index eb9bfc5..1bb3fdf 100644 > --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml > @@ -40,6 +40,13 @@ properties: > minItems: 1 > maxItems: 2 > > + qcom,dsb-elem-size: > + description: | > + Specifies the DSB element size supported by each monitor > + connected to the aggregator on each port. Should be specified > + in pairs (port, dsb element size). > + $ref: /schemas/types.yaml#/definitions/uint32-array The binding (not yet upstream) says there is just 1 port (port 0). So why do you need more than a single uint32? Rob
在 9/8/2022 6:54 PM, Krzysztof Kozlowski 写道: > On 08/09/2022 10:44, Tao Zhang wrote: >> Add property "qcom,dsb-elem-size" to support DSB element for TPDA. >> Specifies the DSB element size supported by each monitor connected >> to the aggregator on each port. Should be specified in pairs (port, >> dsb element size). >> >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> --- >> Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml >> index eb9bfc5..1bb3fdf 100644 >> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml >> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml >> @@ -40,6 +40,13 @@ properties: >> minItems: 1 >> maxItems: 2 >> >> + qcom,dsb-elem-size: >> + description: | >> + Specifies the DSB element size supported by each monitor >> + connected to the aggregator on each port. Should be specified >> + in pairs (port, dsb element size). >> + $ref: /schemas/types.yaml#/definitions/uint32-array > So it is rather uint32-matrix (need to describe the items subschema). > What about maxItems? > > Best regards, > Krzysztof Yes, indeed it should be uint32-matrix here. I will update in the next release. The "maxItems" cannot be known explicitly because it depends on how many DSB subunit TPDMs are connected to the TPDA input ports. Usually the number of the items is 1 to several, but there is no limit to its maximum value. Best regards, Tao
在 9/13/2022 8:48 AM, Rob Herring 写道: > On Thu, Sep 08, 2022 at 04:44:57PM +0800, Tao Zhang wrote: >> Add property "qcom,dsb-elem-size" to support DSB element for TPDA. >> Specifies the DSB element size supported by each monitor connected >> to the aggregator on each port. Should be specified in pairs (port, >> dsb element size). > What is DSB? The full name of DSB is "Discrete Single Bit". The DSB element size supported by different DSB subunit TPDMs is different, so TPDA needs to be informed through configuration in device tree. >> Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> >> --- >> Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++ >> 1 file changed, 9 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml >> index eb9bfc5..1bb3fdf 100644 >> --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml >> +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml >> @@ -40,6 +40,13 @@ properties: >> minItems: 1 >> maxItems: 2 >> >> + qcom,dsb-elem-size: >> + description: | >> + Specifies the DSB element size supported by each monitor >> + connected to the aggregator on each port. Should be specified >> + in pairs (port, dsb element size). >> + $ref: /schemas/types.yaml#/definitions/uint32-array > The binding (not yet upstream) says there is just 1 port (port 0). So > why do you need more than a single uint32? > > Rob TPDA(Trace, Profiling and Diagnostics Aggregator) is to provide packetization, funneling and timestamping of TPDM data. Multiple monitors are connected to different input ports of TPDA. - - - - - - - - - - - - | TPDM 0| | TPDM 1 | | TPDM 2| - - - - - - - - - - - - | | | |_ _ _ _ _ _ | _ _ _ _ | | | | | | | ------------------ | TPDA | ------------------ There may be multiple DSB subunit TPDMs connected to different input ports of the same TPDA, so we need to use port here to define the distinction in device tree. Best regards, Tao
On 13/09/2022 09:00, Tao Zhang wrote: >>> + qcom,dsb-elem-size: >>> + description: | >>> + Specifies the DSB element size supported by each monitor >>> + connected to the aggregator on each port. Should be specified >>> + in pairs (port, dsb element size). >>> + $ref: /schemas/types.yaml#/definitions/uint32-array >> So it is rather uint32-matrix (need to describe the items subschema). >> What about maxItems? >> >> Best regards, >> Krzysztof > > Yes, indeed it should be uint32-matrix here. I will update in the next > release. > > The "maxItems" cannot be known explicitly because it depends on how many > DSB subunit TPDMs are connected to the TPDA input ports. > > Usually the number of the items is 1 to several, but there is no limit > to its maximum value. OK, thanks. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml index eb9bfc5..1bb3fdf 100644 --- a/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml @@ -40,6 +40,13 @@ properties: minItems: 1 maxItems: 2 + qcom,dsb-elem-size: + description: | + Specifies the DSB element size supported by each monitor + connected to the aggregator on each port. Should be specified + in pairs (port, dsb element size). + $ref: /schemas/types.yaml#/definitions/uint32-array + clocks: maxItems: 1 @@ -82,6 +89,8 @@ examples: compatible = "qcom,coresight-tpda", "arm,primecell"; reg = <0x6004000 0x1000>; + qcom,dsb-elem-size = <0 32>; + clocks = <&aoss_qmp>; clock-names = "apb_pclk";
Add property "qcom,dsb-elem-size" to support DSB element for TPDA. Specifies the DSB element size supported by each monitor connected to the aggregator on each port. Should be specified in pairs (port, dsb element size). Signed-off-by: Tao Zhang <quic_taozha@quicinc.com> --- Documentation/devicetree/bindings/arm/qcom,coresight-tpda.yaml | 9 +++++++++ 1 file changed, 9 insertions(+)