| Message ID | 20220912175058.280386-2-vladimir.oltean@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Remove label = "cpu" from DSA dt-bindings | expand |
On 9/12/22 10:50, Vladimir Oltean wrote: > The fact that some DSA device trees use 'label = "cpu"' for the CPU port > is nothing but blind cargo cult copying. The 'label' property was never > part of the DSA DT bindings for anything except the user ports, where it > provided a hint as to what name the created netdevs should use. > > DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), > but this is only for non-OF code paths (platform data). > > The proper way to identify a CPU port is to look at whether the > 'ethernet' phandle is present. > > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
On 12.09.2022 20:50, Vladimir Oltean wrote: > The fact that some DSA device trees use 'label = "cpu"' for the CPU port > is nothing but blind cargo cult copying. The 'label' property was never > part of the DSA DT bindings for anything except the user ports, where it > provided a hint as to what name the created netdevs should use. > > DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), > but this is only for non-OF code paths (platform data). > > The proper way to identify a CPU port is to look at whether the > 'ethernet' phandle is present. > > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Arınç ÜNAL <arinc.unal@arinc9.com> Arınç > --- > .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 12 +++--------- > 1 file changed, 3 insertions(+), 9 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > index f9e7b6e20b35..fa271ee16b5e 100644 > --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml > @@ -163,9 +163,7 @@ patternProperties: > allOf: > - $ref: dsa-port.yaml# > - if: > - properties: > - label: > - const: cpu > + required: [ ethernet ] > then: > required: > - phy-mode > @@ -187,9 +185,7 @@ $defs: > patternProperties: > "^(ethernet-)?port@[0-9]+$": > if: > - properties: > - label: > - const: cpu > + required: [ ethernet ] > then: > if: > properties: > @@ -215,9 +211,7 @@ $defs: > patternProperties: > "^(ethernet-)?port@[0-9]+$": > if: > - properties: > - label: > - const: cpu > + required: [ ethernet ] > then: > if: > properties:
On Mon, 12 Sep 2022 20:50:56 +0300, Vladimir Oltean wrote: > The fact that some DSA device trees use 'label = "cpu"' for the CPU port > is nothing but blind cargo cult copying. The 'label' property was never > part of the DSA DT bindings for anything except the user ports, where it > provided a hint as to what name the created netdevs should use. > > DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), > but this is only for non-OF code paths (platform data). > > The proper way to identify a CPU port is to look at whether the > 'ethernet' phandle is present. > > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> > --- > .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 12 +++--------- > 1 file changed, 3 insertions(+), 9 deletions(-) > Acked-by: Rob Herring <robh@kernel.org>
On 12.09.2022 20:50, Vladimir Oltean wrote: > The fact that some DSA device trees use 'label = "cpu"' for the CPU port > is nothing but blind cargo cult copying. The 'label' property was never > part of the DSA DT bindings for anything except the user ports, where it > provided a hint as to what name the created netdevs should use. > > DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), > but this is only for non-OF code paths (platform data). > > The proper way to identify a CPU port is to look at whether the > 'ethernet' phandle is present. > > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> I realised "dt-bindings: net: dsa: mt7530:" prefix is used here instead of the usual "dt-bindings: net: dsa: mediatek,mt7530:". Does this matter? Arınç
On Tue, Sep 13, 2022 at 06:55:05PM +0300, Arınç ÜNAL wrote: > On 12.09.2022 20:50, Vladimir Oltean wrote: > > The fact that some DSA device trees use 'label = "cpu"' for the CPU port > > is nothing but blind cargo cult copying. The 'label' property was never > > part of the DSA DT bindings for anything except the user ports, where it > > provided a hint as to what name the created netdevs should use. > > > > DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), > > but this is only for non-OF code paths (platform data). > > > > The proper way to identify a CPU port is to look at whether the > > 'ethernet' phandle is present. > > > > Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> > > I realised "dt-bindings: net: dsa: mt7530:" prefix is used here instead of > the usual "dt-bindings: net: dsa: mediatek,mt7530:". Does this matter? Since "mt7530" implies "mediatek", I preferred to skip it.
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index f9e7b6e20b35..fa271ee16b5e 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -163,9 +163,7 @@ patternProperties: allOf: - $ref: dsa-port.yaml# - if: - properties: - label: - const: cpu + required: [ ethernet ] then: required: - phy-mode @@ -187,9 +185,7 @@ $defs: patternProperties: "^(ethernet-)?port@[0-9]+$": if: - properties: - label: - const: cpu + required: [ ethernet ] then: if: properties: @@ -215,9 +211,7 @@ $defs: patternProperties: "^(ethernet-)?port@[0-9]+$": if: - properties: - label: - const: cpu + required: [ ethernet ] then: if: properties:
The fact that some DSA device trees use 'label = "cpu"' for the CPU port is nothing but blind cargo cult copying. The 'label' property was never part of the DSA DT bindings for anything except the user ports, where it provided a hint as to what name the created netdevs should use. DSA does use the "cpu" port label to identify a CPU port in dsa_port_parse(), but this is only for non-OF code paths (platform data). The proper way to identify a CPU port is to look at whether the 'ethernet' phandle is present. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- .../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)