| Message ID | 20220810030500.2793882-3-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | power: supply: Lenovo Yoga C630 EC | expand |
On Tue, Aug 09, 2022 at 10:05:00PM -0500, Bjorn Andersson wrote: > The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC > providing AC-adapter and battery status, as well as USB Type-C altmode > notifications for Displayport operation. There's a couple of minor review comments but before we get to that: woo hoo! > The Yoga C630 ships with Windows, where these operations primarily are > implemented in ACPI, but due to various issues with the hardware > representation therein it's not possible to run Linux on this > information. As such this is a best-effort re-implementation of these > operations, based on the register map expressed in ACPI and a fair > amount of trial and error. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Reported-by: kernel test robot <lkp@intel.com> > --- > drivers/power/supply/Kconfig | 11 + > drivers/power/supply/Makefile | 1 + > drivers/power/supply/yoga-c630-ec.c | 547 ++++++++++++++++++++++++++++ > 3 files changed, 559 insertions(+) > create mode 100644 drivers/power/supply/yoga-c630-ec.c > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > index 1aa8323ad9f6..6e706e948ad2 100644 > --- a/drivers/power/supply/Kconfig > +++ b/drivers/power/supply/Kconfig > @@ -897,4 +897,15 @@ config BATTERY_UG3105 > device is off or suspended, the functionality of this driver is > limited to reporting capacity only. > > +config LENOVO_YOGA_C630_EC > + tristate "Lenovo Yoga C630 EC battery driver" > + depends on DRM > + depends on I2C This needs a "depends on TYPEC" in order to avoid linker errors. > + help > + Driver for the Embedded Controller in the Qualcomm Snapdragon-based > + Lenovo Yoga C630, which provides battery information and USB Type-C > + altmode notifications. > + > + Say M or Y here to include this support. > + > endif # POWER_SUPPLY > diff --git a/drivers/power/supply/yoga-c630-ec.c b/drivers/power/supply/yoga-c630-ec.c > new file mode 100644 > index 000000000000..1fa0b5844e01 > --- /dev/null > +++ b/drivers/power/supply/yoga-c630-ec.c > @@ -0,0 +1,547 @@ > <snip> > +static int yoga_c630_ec_bat_get_property(struct power_supply *psy, > + enum power_supply_property psp, > + union power_supply_propval *val) > +{ > + struct yoga_c630_ec *ec = power_supply_get_drvdata(psy); > + int rc = 0; > + > + if (ec->bat_present) > + yoga_c630_ec_maybe_update_bat_status(ec); > + else if (psp != POWER_SUPPLY_PROP_PRESENT) > + return -ENODEV; > + > + switch (psp) { > <snip> > + case POWER_SUPPLY_PROP_TECHNOLOGY: > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > + break; > + case POWER_SUPPLY_PROP_MODEL_NAME: > + val->strval = "PABAS0241231"; > + break; > + case POWER_SUPPLY_PROP_MANUFACTURER: > + val->strval = "Compal"; > + break; > + case POWER_SUPPLY_PROP_SERIAL_NUMBER: > + val->strval = "05072018"; > + break; I'm a little sceptical that hardcoding a serial number into the driver provides anybody any benefit (regardless of whether the AML code does this). AFAICT this is not a commonly implemented property in other power supplies so I'm not clear why this is needed. Daniel.
On Mon, Sep 12, 2022 at 05:00:17PM +0000, Daniel Thompson wrote: > On Tue, Aug 09, 2022 at 10:05:00PM -0500, Bjorn Andersson wrote: > > The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC > > providing AC-adapter and battery status, as well as USB Type-C altmode > > notifications for Displayport operation. > > There's a couple of minor review comments but before we get to that: > woo hoo! ... and now with the correct address for Bjorn too (comments still below and indented > one level). Daniel. > > The Yoga C630 ships with Windows, where these operations primarily are > > implemented in ACPI, but due to various issues with the hardware > > representation therein it's not possible to run Linux on this > > information. As such this is a best-effort re-implementation of these > > operations, based on the register map expressed in ACPI and a fair > > amount of trial and error. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Reported-by: kernel test robot <lkp@intel.com> > > --- > > drivers/power/supply/Kconfig | 11 + > > drivers/power/supply/Makefile | 1 + > > drivers/power/supply/yoga-c630-ec.c | 547 ++++++++++++++++++++++++++++ > > 3 files changed, 559 insertions(+) > > create mode 100644 drivers/power/supply/yoga-c630-ec.c > > > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig > > index 1aa8323ad9f6..6e706e948ad2 100644 > > --- a/drivers/power/supply/Kconfig > > +++ b/drivers/power/supply/Kconfig > > @@ -897,4 +897,15 @@ config BATTERY_UG3105 > > device is off or suspended, the functionality of this driver is > > limited to reporting capacity only. > > > > +config LENOVO_YOGA_C630_EC > > + tristate "Lenovo Yoga C630 EC battery driver" > > + depends on DRM > > + depends on I2C > > This needs a "depends on TYPEC" in order to avoid linker errors. > > > > + help > > + Driver for the Embedded Controller in the Qualcomm Snapdragon-based > > + Lenovo Yoga C630, which provides battery information and USB Type-C > > + altmode notifications. > > + > > + Say M or Y here to include this support. > > + > > endif # POWER_SUPPLY > > diff --git a/drivers/power/supply/yoga-c630-ec.c b/drivers/power/supply/yoga-c630-ec.c > > new file mode 100644 > > index 000000000000..1fa0b5844e01 > > --- /dev/null > > +++ b/drivers/power/supply/yoga-c630-ec.c > > @@ -0,0 +1,547 @@ > > <snip> > > +static int yoga_c630_ec_bat_get_property(struct power_supply *psy, > > + enum power_supply_property psp, > > + union power_supply_propval *val) > > +{ > > + struct yoga_c630_ec *ec = power_supply_get_drvdata(psy); > > + int rc = 0; > > + > > + if (ec->bat_present) > > + yoga_c630_ec_maybe_update_bat_status(ec); > > + else if (psp != POWER_SUPPLY_PROP_PRESENT) > > + return -ENODEV; > > + > > + switch (psp) { > > <snip> > > + case POWER_SUPPLY_PROP_TECHNOLOGY: > > + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; > > + break; > > + case POWER_SUPPLY_PROP_MODEL_NAME: > > + val->strval = "PABAS0241231"; > > + break; > > + case POWER_SUPPLY_PROP_MANUFACTURER: > > + val->strval = "Compal"; > > + break; > > + case POWER_SUPPLY_PROP_SERIAL_NUMBER: > > + val->strval = "05072018"; > > + break; > > I'm a little sceptical that hardcoding a serial number into the > driver provides anybody any benefit (regardless of whether the > AML code does this). AFAICT this is not a commonly implemented property > in other power supplies so I'm not clear why this is needed. > > > Daniel.
Hi, [+Cc Lee Jones, DRI devel] On Tue, Aug 09, 2022 at 10:05:00PM -0500, Bjorn Andersson wrote: > The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC > providing AC-adapter and battery status, as well as USB Type-C altmode > notifications for Displayport operation. > > The Yoga C630 ships with Windows, where these operations primarily are > implemented in ACPI, but due to various issues with the hardware > representation therein it's not possible to run Linux on this > information. As such this is a best-effort re-implementation of these > operations, based on the register map expressed in ACPI and a fair > amount of trial and error. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > [...] > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > + if (val < 0) > + goto out_unlock; > + ec->unit_ma = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > + if (!ec->unit_ma) > + ec->scale = 1000; > + else > + ec->scale = 1; Since I'm not sure how much of information was gained by reverse engineering: Is this really milliamps vs microamps and not milliamps vs milliwatt? SBS batteries usually report either mA or mW. > [...] > + case POWER_SUPPLY_PROP_SERIAL_NUMBER: > + val->strval = "05072018"; > + break; why is this hardcoded? :) > [...] > + device_for_each_child_node(dev, fwnode) { > + ret = fwnode_property_read_u32(fwnode, "reg", &port); > + if (ret < 0) > + continue; > + > + /* Got multiple ports, but altmode is only possible on port 1 */ > + if (port != 1) > + continue; > + > + ec->bridge.funcs = &yoga_c630_ec_bridge_funcs; > + ec->bridge.of_node = to_of_node(fwnode); > + ec->bridge.ops = DRM_BRIDGE_OP_HPD; > + ec->bridge.type = DRM_MODE_CONNECTOR_USB; > + > + ret = devm_drm_bridge_add(dev, &ec->bridge); > + if (ret) { > + dev_err(dev, "failed to register drm bridge\n"); > + fwnode_handle_put(fwnode); > + return ret; > + } I wonder if DRM people want to see this in drivers/gpu/drm/bridge. Maybe it's better to make this a MFD driver? > [...] -- Sebastian
On Tue, Sep 13, 2022 at 12:45:45PM +0200, Sebastian Reichel wrote: > Hi, > > [+Cc Lee Jones, DRI devel] > > On Tue, Aug 09, 2022 at 10:05:00PM -0500, Bjorn Andersson wrote: > > The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC > > providing AC-adapter and battery status, as well as USB Type-C altmode > > notifications for Displayport operation. > > > > The Yoga C630 ships with Windows, where these operations primarily are > > implemented in ACPI, but due to various issues with the hardware > > representation therein it's not possible to run Linux on this > > information. As such this is a best-effort re-implementation of these > > operations, based on the register map expressed in ACPI and a fair > > amount of trial and error. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > --- > > [...] > > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > > + if (val < 0) > > + goto out_unlock; > > + ec->unit_ma = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > > + if (!ec->unit_ma) > > + ec->scale = 1000; > > + else > > + ec->scale = 1; > > Since I'm not sure how much of information was gained by reverse > engineering: Is this really milliamps vs microamps and not milliamps > vs milliwatt? SBS batteries usually report either mA or mW. > Unfortunately I don't know the answer to this. > > [...] > > + case POWER_SUPPLY_PROP_SERIAL_NUMBER: > > + val->strval = "05072018"; > > + break; > > why is this hardcoded? :) > I don't know, but as Daniel suggests, it would make sense to just drop it. > > [...] > > + device_for_each_child_node(dev, fwnode) { > > + ret = fwnode_property_read_u32(fwnode, "reg", &port); > > + if (ret < 0) > > + continue; > > + > > + /* Got multiple ports, but altmode is only possible on port 1 */ > > + if (port != 1) > > + continue; > > + > > + ec->bridge.funcs = &yoga_c630_ec_bridge_funcs; > > + ec->bridge.of_node = to_of_node(fwnode); > > + ec->bridge.ops = DRM_BRIDGE_OP_HPD; > > + ec->bridge.type = DRM_MODE_CONNECTOR_USB; > > + > > + ret = devm_drm_bridge_add(dev, &ec->bridge); > > + if (ret) { > > + dev_err(dev, "failed to register drm bridge\n"); > > + fwnode_handle_put(fwnode); > > + return ret; > > + } > > I wonder if DRM people want to see this in drivers/gpu/drm/bridge. > Maybe it's better to make this a MFD driver? > I did consider it, but it adds a whole bunch of boiler plate code without a lot of benefit. There are a few other cases where I think it would make sense to have drm bridges outside of drivers/gpu/drm, such as drivers/usb/typec/altmodes/ and drivers/platform/chrome/... > > [...] > > -- Sebastian Thanks, Bjorn
On Fri, 16 Sept 2022 at 00:25, Bjorn Andersson <andersson@kernel.org> wrote: > > On Tue, Sep 13, 2022 at 12:45:45PM +0200, Sebastian Reichel wrote: > > Hi, > > > > [+Cc Lee Jones, DRI devel] > > > > On Tue, Aug 09, 2022 at 10:05:00PM -0500, Bjorn Andersson wrote: > > > The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC > > > providing AC-adapter and battery status, as well as USB Type-C altmode > > > notifications for Displayport operation. > > > > > > The Yoga C630 ships with Windows, where these operations primarily are > > > implemented in ACPI, but due to various issues with the hardware > > > representation therein it's not possible to run Linux on this > > > information. As such this is a best-effort re-implementation of these > > > operations, based on the register map expressed in ACPI and a fair > > > amount of trial and error. > > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > --- > > > [...] > > > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > > > + if (val < 0) > > > + goto out_unlock; > > > + ec->unit_ma = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > > > + if (!ec->unit_ma) > > > + ec->scale = 1000; > > > + else > > > + ec->scale = 1; > > > > Since I'm not sure how much of information was gained by reverse > > engineering: Is this really milliamps vs microamps and not milliamps > > vs milliwatt? SBS batteries usually report either mA or mW. > > > > Unfortunately I don't know the answer to this. > > > > [...] > > > + case POWER_SUPPLY_PROP_SERIAL_NUMBER: > > > + val->strval = "05072018"; > > > + break; > > > > why is this hardcoded? :) > > > > I don't know, but as Daniel suggests, it would make sense to just drop > it. > > > > [...] > > > + device_for_each_child_node(dev, fwnode) { > > > + ret = fwnode_property_read_u32(fwnode, "reg", &port); > > > + if (ret < 0) > > > + continue; > > > + > > > + /* Got multiple ports, but altmode is only possible on port 1 */ > > > + if (port != 1) > > > + continue; > > > + > > > + ec->bridge.funcs = &yoga_c630_ec_bridge_funcs; > > > + ec->bridge.of_node = to_of_node(fwnode); > > > + ec->bridge.ops = DRM_BRIDGE_OP_HPD; > > > + ec->bridge.type = DRM_MODE_CONNECTOR_USB; > > > + > > > + ret = devm_drm_bridge_add(dev, &ec->bridge); > > > + if (ret) { > > > + dev_err(dev, "failed to register drm bridge\n"); > > > + fwnode_handle_put(fwnode); > > > + return ret; > > > + } > > > > I wonder if DRM people want to see this in drivers/gpu/drm/bridge. > > Maybe it's better to make this a MFD driver? > > > > I did consider it, but it adds a whole bunch of boiler plate code > without a lot of benefit. > > There are a few other cases where I think it would make sense to have > drm bridges outside of drivers/gpu/drm, such as > drivers/usb/typec/altmodes/ and drivers/platform/chrome/... What about a solution which might sound simpler than MFD: from your driver's probe() register a platform device which represents a drm bridge. Add drm_bridge driver for it into drivers/gpu/drm/bridges/.
On Fri, Sep 16, 2022 at 12:53:42AM +0300, Dmitry Baryshkov wrote: > On Fri, 16 Sept 2022 at 00:25, Bjorn Andersson <andersson@kernel.org> wrote: > > > > On Tue, Sep 13, 2022 at 12:45:45PM +0200, Sebastian Reichel wrote: > > > Hi, > > > > > > [+Cc Lee Jones, DRI devel] > > > > > > On Tue, Aug 09, 2022 at 10:05:00PM -0500, Bjorn Andersson wrote: > > > > The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC > > > > providing AC-adapter and battery status, as well as USB Type-C altmode > > > > notifications for Displayport operation. > > > > > > > > The Yoga C630 ships with Windows, where these operations primarily are > > > > implemented in ACPI, but due to various issues with the hardware > > > > representation therein it's not possible to run Linux on this > > > > information. As such this is a best-effort re-implementation of these > > > > operations, based on the register map expressed in ACPI and a fair > > > > amount of trial and error. > > > > > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > > > --- > > > > [...] > > > > + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); > > > > + if (val < 0) > > > > + goto out_unlock; > > > > + ec->unit_ma = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; > > > > + if (!ec->unit_ma) > > > > + ec->scale = 1000; > > > > + else > > > > + ec->scale = 1; > > > > > > Since I'm not sure how much of information was gained by reverse > > > engineering: Is this really milliamps vs microamps and not milliamps > > > vs milliwatt? SBS batteries usually report either mA or mW. > > > > > > > Unfortunately I don't know the answer to this. > > > > > > [...] > > > > + case POWER_SUPPLY_PROP_SERIAL_NUMBER: > > > > + val->strval = "05072018"; > > > > + break; > > > > > > why is this hardcoded? :) > > > > > > > I don't know, but as Daniel suggests, it would make sense to just drop > > it. > > > > > > [...] > > > > + device_for_each_child_node(dev, fwnode) { > > > > + ret = fwnode_property_read_u32(fwnode, "reg", &port); > > > > + if (ret < 0) > > > > + continue; > > > > + > > > > + /* Got multiple ports, but altmode is only possible on port 1 */ > > > > + if (port != 1) > > > > + continue; > > > > + > > > > + ec->bridge.funcs = &yoga_c630_ec_bridge_funcs; > > > > + ec->bridge.of_node = to_of_node(fwnode); > > > > + ec->bridge.ops = DRM_BRIDGE_OP_HPD; > > > > + ec->bridge.type = DRM_MODE_CONNECTOR_USB; > > > > + > > > > + ret = devm_drm_bridge_add(dev, &ec->bridge); > > > > + if (ret) { > > > > + dev_err(dev, "failed to register drm bridge\n"); > > > > + fwnode_handle_put(fwnode); > > > > + return ret; > > > > + } > > > > > > I wonder if DRM people want to see this in drivers/gpu/drm/bridge. > > > Maybe it's better to make this a MFD driver? > > > > > > > I did consider it, but it adds a whole bunch of boiler plate code > > without a lot of benefit. > > > > There are a few other cases where I think it would make sense to have > > drm bridges outside of drivers/gpu/drm, such as > > drivers/usb/typec/altmodes/ and drivers/platform/chrome/... > > What about a solution which might sound simpler than MFD: from your > driver's probe() register a platform device which represents a drm > bridge. Add drm_bridge driver for it into drivers/gpu/drm/bridges/. > That is indeed simpler But then rather than just calling drm_bridge_hpd_notify(status) we need a new custom interface for this driver to call the other drive when status changes and we waste 840 bytes just to track another struct platform_device. Perhaps that could be made generic, so we'd have "proxy_drm_bridge" driver for drivers who implements a HPD drm_bridge but don't want to implement that outside drivers/gpu/drm. But this is just based on the assumption that the "DRM people" require drm_bridges to only live in drivers/gpu/drm/. It's all one kernel and the API is well defined, so I don't think there's a concrete problem to solve. Regards, Bjorn
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 1aa8323ad9f6..6e706e948ad2 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -897,4 +897,15 @@ config BATTERY_UG3105 device is off or suspended, the functionality of this driver is limited to reporting capacity only. +config LENOVO_YOGA_C630_EC + tristate "Lenovo Yoga C630 EC battery driver" + depends on DRM + depends on I2C + help + Driver for the Embedded Controller in the Qualcomm Snapdragon-based + Lenovo Yoga C630, which provides battery information and USB Type-C + altmode notifications. + + Say M or Y here to include this support. + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 7f02f36aea55..24a4129cc427 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -108,3 +108,4 @@ obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o +obj-$(CONFIG_LENOVO_YOGA_C630_EC) += yoga-c630-ec.o diff --git a/drivers/power/supply/yoga-c630-ec.c b/drivers/power/supply/yoga-c630-ec.c new file mode 100644 index 000000000000..1fa0b5844e01 --- /dev/null +++ b/drivers/power/supply/yoga-c630-ec.c @@ -0,0 +1,547 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022 Linaro Ltd. + */ +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/power_supply.h> +#include <linux/usb/typec_mux.h> + +#include <drm/drm_bridge.h> + +#define LENOVO_EC_CACHE_TIME (10 * HZ) + +#define LENOVO_EC_RESPONSE_REG 0x1 +#define LENOVO_EC_REQUEST_REG 0x2 + +#define LENOVO_EC_READ_REG 0xb0 +#define LENOVO_EC_QUERY_USB_EVENT 0x8 +#define LENOVO_EC_USB_EVENT_MUX GENMASK(1, 0) +#define LENOVO_EC_USB_EVENT_ORIENTATION BIT(7) +#define LENOVO_EC_ADPT_STATUS 0xa3 +#define LENOVO_EC_ADPT_PRESENT BIT(7) +#define LENOVO_EC_BAT_STATUS 0xc1 +#define LENOVO_EC_BAT_VOLTAGE 0xc6 +#define LENOVO_EC_BAT_CURRENT 0xd2 +#define LENOVO_EC_BAT_PRESENT 0xda +#define LENOVO_EC_BAT_ATTRIBUTES 0xc0 +#define LENOVO_EC_BAT_ATTR_UNIT_IS_MA BIT(1) +#define LENOVO_EC_BAT_REMAIN_CAPACITY 0xc2 +#define LENOVO_EC_BAT_DESIGN_VOLTAGE 0xc8 +#define LENOVO_EC_BAT_DESIGN_CAPACITY 0xca +#define LENOVO_EC_BAT_FULL_CAPACITY 0xcc +#define LENOVO_EC_BAT_FULL_FACTORY 0xd6 +#define LENOVO_EC_BAT_FULL_REGISTER 0xdb + +#define LENOVO_EC_REQUEST_NEXT_EVENT 0x84 +#define LENOVO_EC_EVENT_USB 0x20 +#define LENOVO_EC_EVENT_UCSI 0x21 +#define LENOVO_EC_EVENT_HPD 0x22 +#define LENOVO_EC_EVENT_BAT_STATUS 0x24 +#define LENOVO_EC_EVENT_BAT_INFO 0x25 +#define LENOVO_EC_EVENT_BAT_ADPT_STATUS 0x37 + +struct yoga_c630_ec { + struct i2c_client *client; + struct mutex lock; + + struct power_supply *adp_psy; + struct power_supply *bat_psy; + + struct typec_switch *typec_switch; + + unsigned long last_status_update; + + bool adapter_online; + + bool unit_ma; + + unsigned int scale; + + bool bat_present; + unsigned int bat_status; + + unsigned int design_capacity; + unsigned int design_voltage; + unsigned int full_charge_capacity; + + unsigned int capacity_now; + unsigned int voltage_now; + + int rate_now; + + bool bridge_configured; + struct drm_bridge bridge; +}; + +static int yoga_c630_ec_request(struct yoga_c630_ec *ec, u8 *req, size_t req_len, + u8 *resp, size_t resp_len) +{ + int ret; + + WARN_ON(!mutex_is_locked(&ec->lock)); + + ret = i2c_smbus_write_i2c_block_data(ec->client, LENOVO_EC_REQUEST_REG, + req_len, req); + if (ret < 0) + return ret; + + return i2c_smbus_read_i2c_block_data(ec->client, LENOVO_EC_RESPONSE_REG, + resp_len, resp); +} + +static int yoga_c630_ec_read8(struct yoga_c630_ec *ec, u8 addr) +{ + int ret; + u8 val; + + ret = yoga_c630_ec_request(ec, (u8[]) { LENOVO_EC_READ_REG, addr }, 2, + &val, 1); + if (ret < 0) + return ret; + + return val; +} + +static int yoga_c630_ec_read16(struct yoga_c630_ec *ec, u8 addr) +{ + int ret; + u8 msb; + u8 lsb; + + ret = yoga_c630_ec_request(ec, (u8[]) { LENOVO_EC_READ_REG, addr }, 2, + &lsb, 1); + if (ret < 0) + return ret; + + ret = yoga_c630_ec_request(ec, (u8[]) { LENOVO_EC_READ_REG, addr + 1 }, 2, + &msb, 1); + if (ret < 0) + return ret; + + return msb << 8 | lsb; +} + +static void yoga_c630_ec_update_bat_info(struct yoga_c630_ec *ec) +{ + int val; + + mutex_lock(&ec->lock); + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_PRESENT); + if (val < 0) + goto out_unlock; + ec->bat_present = !!(val & BIT(0)); + if (!ec->bat_present) + goto out_unlock; + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_ATTRIBUTES); + if (val < 0) + goto out_unlock; + ec->unit_ma = val & LENOVO_EC_BAT_ATTR_UNIT_IS_MA; + if (!ec->unit_ma) + ec->scale = 1000; + else + ec->scale = 1; + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_CAPACITY); + if (val < 0) + goto out_unlock; + ec->design_capacity = val * ec->scale; + + msleep(50); + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_DESIGN_VOLTAGE); + if (val < 0) + goto out_unlock; + ec->design_voltage = val; + + msleep(50); + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_FULL_REGISTER); + if (val < 0) + goto out_unlock; + if (val & BIT(0)) + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_FACTORY); + else + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_FULL_CAPACITY); + if (val < 0) + goto out_unlock; + ec->full_charge_capacity = val * ec->scale; + +out_unlock: + mutex_unlock(&ec->lock); +} + +static void yoga_c630_ec_maybe_update_bat_status(struct yoga_c630_ec *ec) +{ + int val = 0; + + mutex_lock(&ec->lock); + + if (time_before(jiffies, ec->last_status_update + LENOVO_EC_CACHE_TIME)) + goto out_unlock; + + val = yoga_c630_ec_read8(ec, LENOVO_EC_BAT_STATUS); + if (val < 0) + goto out_unlock; + ec->bat_status = val; + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_REMAIN_CAPACITY); + if (val < 0) + goto out_unlock; + ec->capacity_now = val * ec->scale; + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_VOLTAGE); + if (val < 0) + goto out_unlock; + ec->voltage_now = val; + + val = yoga_c630_ec_read16(ec, LENOVO_EC_BAT_CURRENT); + if (val < 0) + goto out_unlock; + ec->rate_now = sign_extend32(val, 15) * ec->scale; + + if (ec->unit_ma) + ec->rate_now = ec->rate_now * ec->voltage_now / 1000; + + ec->last_status_update = jiffies; + +out_unlock: + mutex_unlock(&ec->lock); +} + +static int yoga_c630_ec_update_adapter_status(struct yoga_c630_ec *ec) +{ + int val; + + mutex_lock(&ec->lock); + + val = yoga_c630_ec_read8(ec, LENOVO_EC_ADPT_STATUS); + if (val > 0) + ec->adapter_online = FIELD_GET(LENOVO_EC_ADPT_PRESENT, val); + + mutex_unlock(&ec->lock); + + return val; +} + +static bool yoga_c630_ec_is_charged(struct yoga_c630_ec *ec) +{ + if (ec->bat_status != 0) + return false; + + if (ec->full_charge_capacity == ec->capacity_now) + return true; + + if (ec->design_capacity == ec->capacity_now) + return true; + + return false; +} + +static int yoga_c630_ec_bat_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct yoga_c630_ec *ec = power_supply_get_drvdata(psy); + int rc = 0; + + if (ec->bat_present) + yoga_c630_ec_maybe_update_bat_status(ec); + else if (psp != POWER_SUPPLY_PROP_PRESENT) + return -ENODEV; + + switch (psp) { + case POWER_SUPPLY_PROP_STATUS: + if (ec->bat_status & BIT(0)) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else if (ec->bat_status & BIT(1)) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + else if (yoga_c630_ec_is_charged(ec)) + val->intval = POWER_SUPPLY_STATUS_FULL; + else + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + break; + case POWER_SUPPLY_PROP_PRESENT: + val->intval = ec->bat_present; + break; + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + val->intval = ec->design_voltage; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval = ec->design_capacity; + break; + case POWER_SUPPLY_PROP_CHARGE_FULL: + val->intval = ec->full_charge_capacity; + break; + case POWER_SUPPLY_PROP_CHARGE_NOW: + val->intval = ec->capacity_now; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + val->intval = ec->rate_now; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + val->intval = ec->voltage_now; + break; + case POWER_SUPPLY_PROP_TECHNOLOGY: + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + break; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = "PABAS0241231"; + break; + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = "Compal"; + break; + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + val->strval = "05072018"; + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static enum power_supply_property yoga_c630_ec_bat_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_SERIAL_NUMBER, +}; + +static const struct power_supply_desc yoga_c630_ec_bat_psy_desc = { + .name = "yoga-c630-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = yoga_c630_ec_bat_properties, + .num_properties = ARRAY_SIZE(yoga_c630_ec_bat_properties), + .get_property = yoga_c630_ec_bat_get_property, +}; + +static int yoga_c630_ec_adpt_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct yoga_c630_ec *ec = power_supply_get_drvdata(psy); + int rc = 0; + + yoga_c630_ec_update_adapter_status(ec); + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = ec->adapter_online; + break; + default: + rc = -EINVAL; + break; + } + + return rc; +} + +static enum power_supply_property yoga_c630_ec_adpt_properties[] = { + POWER_SUPPLY_PROP_ONLINE, +}; + +static const struct power_supply_desc yoga_c630_ec_adpt_psy_desc = { + .name = "yoga-c630-adapter", + .type = POWER_SUPPLY_TYPE_USB_TYPE_C, + .properties = yoga_c630_ec_adpt_properties, + .num_properties = ARRAY_SIZE(yoga_c630_ec_adpt_properties), + .get_property = yoga_c630_ec_adpt_get_property, +}; + +static int yoga_c630_ec_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + return flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR ? 0 : -EINVAL; +} + +static const struct drm_bridge_funcs yoga_c630_ec_bridge_funcs = { + .attach = yoga_c630_ec_attach, +}; + +static int yoga_c630_ec_query_usb_event(struct yoga_c630_ec *ec) +{ + struct device *dev = &ec->client->dev; + enum typec_orientation orientation; + enum drm_connector_status status; + int event; + + mutex_lock(&ec->lock); + event = yoga_c630_ec_read8(ec, LENOVO_EC_QUERY_USB_EVENT); + mutex_unlock(&ec->lock); + if (event < 0) { + dev_err(dev, "unable to query USB event\n"); + return event; + } + + if (FIELD_GET(LENOVO_EC_USB_EVENT_MUX, event)) + status = connector_status_connected; + else + status = connector_status_disconnected; + + if (FIELD_GET(LENOVO_EC_USB_EVENT_ORIENTATION, event)) + orientation = TYPEC_ORIENTATION_REVERSE; + else + orientation = TYPEC_ORIENTATION_NORMAL; + + typec_switch_set(ec->typec_switch, orientation); + if (ec->bridge_configured) + drm_bridge_hpd_notify(&ec->bridge, status); + + return 0; +} + +static irqreturn_t yoga_c630_ec_intr(int irq, void *data) +{ + struct yoga_c630_ec *ec = data; + u8 event; + int ret; + + mutex_lock(&ec->lock); + ret = yoga_c630_ec_request(ec, (u8[]){ LENOVO_EC_REQUEST_NEXT_EVENT }, 1, + &event, 1); + mutex_unlock(&ec->lock); + if (ret < 0) + return IRQ_HANDLED; + + switch (event) { + case LENOVO_EC_EVENT_USB: + case LENOVO_EC_EVENT_HPD: + yoga_c630_ec_query_usb_event(ec); + break; + case LENOVO_EC_EVENT_BAT_INFO: + yoga_c630_ec_update_bat_info(ec); + break; + case LENOVO_EC_EVENT_BAT_ADPT_STATUS: + power_supply_changed(ec->adp_psy); + fallthrough; + case LENOVO_EC_EVENT_BAT_STATUS: + power_supply_changed(ec->bat_psy); + break; + } + + return IRQ_HANDLED; +} + +static void yoga_c630_ec_put_switch(void *data) +{ + typec_switch_put(data); +} + +static int yoga_c630_ec_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct power_supply_config adp_cfg = {}; + struct power_supply_config bat_cfg = {}; + struct fwnode_handle *fwnode; + struct yoga_c630_ec *ec; + struct device *dev = &client->dev; + u32 port; + int ret; + + ec = devm_kzalloc(dev, sizeof(*ec), GFP_KERNEL); + if (!ec) + return -ENOMEM; + + mutex_init(&ec->lock); + ec->client = client; + + adp_cfg.drv_data = ec; + adp_cfg.of_node = client->dev.of_node; + ec->adp_psy = devm_power_supply_register(dev, &yoga_c630_ec_adpt_psy_desc, &adp_cfg); + if (IS_ERR(ec->adp_psy)) { + dev_err(dev, "failed to register AC adapter supply\n"); + return PTR_ERR(ec->adp_psy); + } + + bat_cfg.drv_data = ec; + bat_cfg.of_node = client->dev.of_node; + ec->bat_psy = devm_power_supply_register(dev, &yoga_c630_ec_bat_psy_desc, &bat_cfg); + if (IS_ERR(ec->bat_psy)) { + dev_err(dev, "failed to register battery supply\n"); + return PTR_ERR(ec->bat_psy); + } + + device_for_each_child_node(dev, fwnode) { + ret = fwnode_property_read_u32(fwnode, "reg", &port); + if (ret < 0) + continue; + + /* Got multiple ports, but altmode is only possible on port 1 */ + if (port != 1) + continue; + + ec->bridge.funcs = &yoga_c630_ec_bridge_funcs; + ec->bridge.of_node = to_of_node(fwnode); + ec->bridge.ops = DRM_BRIDGE_OP_HPD; + ec->bridge.type = DRM_MODE_CONNECTOR_USB; + + ret = devm_drm_bridge_add(dev, &ec->bridge); + if (ret) { + dev_err(dev, "failed to register drm bridge\n"); + fwnode_handle_put(fwnode); + return ret; + } + + ec->bridge_configured = true; + + ec->typec_switch = fwnode_typec_switch_get(fwnode); + if (IS_ERR(ec->typec_switch)) + return dev_err_probe(dev, PTR_ERR(ec->typec_switch), + "failed to acquire orientation-switch for port 1\n"); + + ret = devm_add_action_or_reset(dev, yoga_c630_ec_put_switch, + ec->typec_switch); + if (ret) + return ret; + } + + ret = devm_request_threaded_irq(dev, client->irq, + NULL, yoga_c630_ec_intr, + IRQF_ONESHOT, "yoga_c630_ec", ec); + if (ret < 0) + return dev_err_probe(dev, ret, "unable to request irq\n"); + + yoga_c630_ec_update_bat_info(ec); + + return 0; +} + +static const struct of_device_id yoga_c630_ec_of_match[] = { + { .compatible = "lenovo,yoga-c630-ec" }, + {} +}; +MODULE_DEVICE_TABLE(of, yoga_c630_ec_of_match); + +static const struct i2c_device_id yoga_c630_ec_i2c_id_table[] = { + { "yoga-c630-ec", }, + {} +}; +MODULE_DEVICE_TABLE(i2c, yoga_c630_ec_i2c_id_table); + +static struct i2c_driver yoga_c630_ec_i2c_driver = { + .driver = { + .name = "yoga-c630-ec", + .of_match_table = yoga_c630_ec_of_match, + }, + .probe = yoga_c630_ec_probe, + .id_table = yoga_c630_ec_i2c_id_table, +}; +module_i2c_driver(yoga_c630_ec_i2c_driver); + +MODULE_DESCRIPTION("Lenovo Yoga C630 EC driver"); +MODULE_LICENSE("GPL");
The Qualcomm Snapdragon-based Lenovo Yoga C630 has some sort of EC providing AC-adapter and battery status, as well as USB Type-C altmode notifications for Displayport operation. The Yoga C630 ships with Windows, where these operations primarily are implemented in ACPI, but due to various issues with the hardware representation therein it's not possible to run Linux on this information. As such this is a best-effort re-implementation of these operations, based on the register map expressed in ACPI and a fair amount of trial and error. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/power/supply/Kconfig | 11 + drivers/power/supply/Makefile | 1 + drivers/power/supply/yoga-c630-ec.c | 547 ++++++++++++++++++++++++++++ 3 files changed, 559 insertions(+) create mode 100644 drivers/power/supply/yoga-c630-ec.c