| Message ID | 20220916121204.3880182-7-vkoul@kernel.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | Introduce the SC8180x devices | expand |
On Fri, 16 Sept 2022 at 15:13, Vinod Koul <vkoul@kernel.org> wrote: > > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm > SC8180X platform. Supported peripherals includes keyboard, touchpad, > UFS storage, external USB and WiFi. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 590 ++++++++++++++++++ > 2 files changed, 591 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > [skipped] > +&gpu { > + status = "okay"; > + > + zap-shader { > + memory-region = <&gpu_mem>; > + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; Is the firmware signed with the test key or with the proper vendor key? If the latter is true, the firmware should go to the subdir inside the SoC (I'd suggest following the example and using sc8180x/LENOVO/dmi_id/) > + }; > +}; > +
On Fri, Sep 16, 2022 at 03:26:59PM +0300, Dmitry Baryshkov wrote: > On Fri, 16 Sept 2022 at 15:13, Vinod Koul <vkoul@kernel.org> wrote: > > > > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > > > Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm > > SC8180X platform. Supported peripherals includes keyboard, touchpad, > > UFS storage, external USB and WiFi. > > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > > Signed-off-by: Vinod Koul <vkoul@kernel.org> > > --- > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 590 ++++++++++++++++++ > > 2 files changed, 591 insertions(+) > > create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > > > > [skipped] > > > +&gpu { > > + status = "okay"; > > + > > + zap-shader { > > + memory-region = <&gpu_mem>; > > + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; > > Is the firmware signed with the test key or with the proper vendor > key? If the latter is true, the firmware should go to the subdir > inside the SoC (I'd suggest following the example and using > sc8180x/LENOVO/dmi_id/) > Correct, this and the remoteprocs should be pointed to qcom/sc8180x/LENOVO/82AK/ Regards, Bjorn > > + }; > > +}; > > + > > -- > With best wishes > Dmitry
On 16/09/2022 13:12, Vinod Koul wrote: > From: Bjorn Andersson <bjorn.andersson@linaro.org> > > Introduce support for the Lenovo Flex 5G laptop, built on the Qualcomm > SC8180X platform. Supported peripherals includes keyboard, touchpad, > UFS storage, external USB and WiFi. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Signed-off-by: Vinod Koul <vkoul@kernel.org> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 590 ++++++++++++++++++ > 2 files changed, 591 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index f1c620bb078e..a9de6f50ca37 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > new file mode 100644 > index 000000000000..559a1fb6173f > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts > @@ -0,0 +1,590 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. > + * Copyright (c) 2020-2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > +#include "sc8180x.dtsi" > +#include "sc8180x-pmics.dtsi" > + > +/ { > + model = "Lenovo Flex 5G"; > + compatible = "lenovo,flex-5g", "qcom,sc8180x"; > + > + aliases { > + serial0 = &uart13; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pmc8180c_lpg 4 1000000>; > + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&bl_pwm_default_state>; > + }; > + > + chosen { > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&hall_int_active_state>; > + > + lid { Does not look like you tested the DTS against bindings. Please run `make dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). > + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; > + linux,input-type = <EV_SW>; > + linux,code = <SW_LID>; > + wakeup-source; > + wakeup-event-action = <EV_ACT_DEASSERTED>; > + }; > + }; > + > + reserved-memory { > + rmtfs_mem: rmtfs-region@85500000 { > + compatible = "qcom,rmtfs-mem"; > + reg = <0x0 0x85500000 0x0 0x200000>; > + no-map; > + > + qcom,client-id = <1>; > + qcom,vmid = <15>; > + }; > + > + wlan_mem: wlan-region@8bc00000 { > + reg = <0x0 0x8bc00000 0x0 0x180000>; > + no-map; > + }; > + > + mpss_mem: mpss-region@8d800000 { > + reg = <0x0 0x8d800000 0x0 0x3000000>; > + no-map; > + }; > + > + adsp_mem: adsp-region@90800000 { > + reg = <0x0 0x90800000 0x0 0x1c00000>; > + no-map; > + }; > + > + gpu_mem: gpu-region@98715000 { > + reg = <0x0 0x98715000 0x0 0x2000>; > + no-map; > + }; > + > + cdsp_mem: cdsp-region@98900000 { > + reg = <0x0 0x98900000 0x0 0x1400000>; > + no-map; > + }; > + }; > + > + vph_pwr: vph-pwr-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vph_pwr"; > + regulator-min-microvolt = <3700000>; > + regulator-max-microvolt = <3700000>; > + }; > + > + vreg_s4a_1p8: pm8150-s4 { Use consistent naming, so for example "regulator" suffix in node names. > + compatible = "regulator-fixed"; > + regulator-name = "vreg_s4a_1p8"; > + > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + > + regulator-always-on; > + regulator-boot-on; > + > + vin-supply = <&vph_pwr>; > + }; > +}; > + > +&apps_rsc { > + pmc8180-a-rpmh-regulators { > + compatible = "qcom,pmc8180-rpmh-regulators"; Undocumented compatible. > + qcom,pmic-id = "a"; > + > + vdd-s5-supply = <&vph_pwr>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; > + > + vreg_s5a_2p0: smps5 { > + regulator-min-microvolt = <2040000>; > + regulator-max-microvolt = <2100000>; > + }; > + > + vreg_l7a_1p8: ldo7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9a_1p3: ldo9 { > + regulator-min-microvolt = <1296000>; > + regulator-max-microvolt = <1304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12a_1p8: ldo12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pmc8180c-rpmh-regulators { > + compatible = "qcom,pmc8180c-rpmh-regulators"; Same problem. > + qcom,pmic-id = "c"; > + > + vdd-s6-supply = <&vph_pwr>; > + vdd-l2-l3-supply = <&vreg_s6c_1p35>; > + vdd-bob-supply = <&vph_pwr>; > + > + vreg_s6c_1p35: smps6 { > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1372000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3c_1p2: ldo3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10c_3p3: ldo10 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3312000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l11c_3p3: ldo11 { > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3304000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-min-microvolt = <3296000>; > + regulator-max-microvolt = <3350000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > + > + pmc8180-e-rpmh-regulators { > + compatible = "qcom,pmc8180-rpmh-regulators"; > + qcom,pmic-id = "e"; > + > + vdd-s4-supply = <&vph_pwr>; > + vdd-s5-supply = <&vph_pwr>; > + vdd-l2-l10-supply = <&vreg_bob>; > + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; > + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; > + vdd-l13-l16-l17-supply = <&vreg_bob>; > + > + vreg_s4e_0p98: smps4 { > + regulator-min-microvolt = <992000>; > + regulator-max-microvolt = <992000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_s5e_2p05: smps5 { > + regulator-min-microvolt = <2040000>; > + regulator-max-microvolt = <2040000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l1e_0p75: ldo1 { > + regulator-min-microvolt = <752000>; > + regulator-max-microvolt = <752000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l5e_0p88: ldo5 { > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7e_1p8: ldo7 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10e_2p9: ldo10 { > + regulator-min-microvolt = <2904000>; > + regulator-max-microvolt = <2904000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l16e_3p0: ldo16 { > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&dispcc { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + memory-region = <&gpu_mem>; > + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; > + > + status = "okay"; > + > + hid@10 { > + compatible = "hid-over-i2c"; > + reg = <0x10>; > + hid-descr-addr = <0x1>; > + > + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&i2c7 { > + clock-frequency = <100000>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; > + > + status = "okay"; > + > + hid@5 { > + compatible = "hid-over-i2c"; > + reg = <0x5>; > + hid-descr-addr = <0x20>; > + > + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + hid@2c { > + compatible = "hid-over-i2c"; > + reg = <0x2c>; > + hid-descr-addr = <0x20>; > + > + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; > + }; > +}; > + > +&mdss { > + status = "okay"; > +}; > + > +&mdss_edp { > + data-lanes = <0 1 2 3>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&edp_hpd_active>; > + > + status = "okay"; > + > + aux-bus { > + panel { > + compatible = "edp-panel"; > + no-hpd; > + > + backlight = <&backlight>; > + > + ports { > + port { > + auo_b140han06_in: endpoint { > + remote-endpoint = <&mdss_edp_out>; > + }; > + }; > + }; > + }; > + }; > + > + ports { > + port@1 { > + reg = <1>; > + mdss_edp_out: endpoint { > + remote-endpoint = <&auo_b140han06_in>; > + }; > + }; > + }; > +}; > + > +&pcie3 { > + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; > + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie3_default_state>; > + > + status = "okay"; > +}; > + > +&pcie3_phy { > + vdda-phy-supply = <&vreg_l5e_0p88>; > + vdda-pll-supply = <&vreg_l3c_1p2>; > + > + status = "okay"; > +}; > + > +&pmc8180c_lpg { > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&qupv3_id_1 { > + status = "okay"; > +}; > + > +&qupv3_id_2 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + memory-region = <&adsp_mem>; > + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + memory-region = <&cdsp_mem>; > + firmware-name = "qcom/sc8180x/qccdsp8180.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_mpss { > + memory-region = <&mpss_mem>; > + firmware-name = "qcom/sc8180x/qcmpss8180_nm.mbn"; > + > + status = "okay"; > +}; > + > +&uart13 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart13_state>; > + > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn3998-bt"; > + > + vddio-supply = <&vreg_s4a_1p8>; > + vddxo-supply = <&vreg_l7a_1p8>; > + vddrf-supply = <&vreg_l9a_1p3>; > + vddch0-supply = <&vreg_l11c_3p3>; > + max-speed = <3200000>; > + }; > +}; > + > +&ufs_mem_hc { > + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l10e_2p9>; > + vcc-max-microamp = <155000>; > + > + vccq2-supply = <&vreg_l7e_1p8>; > + vccq2-max-microamp = <425000>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&vreg_l5e_0p88>; > + vdda-pll-supply = <&vreg_l3c_1p2>; > + > + status = "okay"; > +}; > + > +&usb_prim_hsphy { > + vdda-pll-supply = <&vreg_l5e_0p88>; > + vdda18-supply = <&vreg_l12a_1p8>; > + vdda33-supply = <&vreg_l16e_3p0>; > + > + status = "okay"; > +}; > + > +&usb_prim_qmpphy { > + vdda-phy-supply = <&vreg_l3c_1p2>; > + vdda-pll-supply = <&vreg_l5e_0p88>; > + > + status = "okay"; > +}; > + > +&usb_prim { > + status = "okay"; > +}; > + > +&usb_prim_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_sec_hsphy { > + vdda-pll-supply = <&vreg_l5e_0p88>; > + vdda18-supply = <&vreg_l12a_1p8>; > + vdda33-supply = <&vreg_l16e_3p0>; > + > + status = "okay"; > +}; > + > +&usb_sec_qmpphy { > + vdda-phy-supply = <&vreg_l3c_1p2>; > + vdda-pll-supply = <&vreg_l5e_0p88>; > + > + status = "okay"; > +}; > + > +&usb_sec { > + status = "okay"; > +}; > + > +&usb_sec_dwc3 { > + dr_mode = "host"; > +}; > + > +&wifi { > + memory-region = <&wlan_mem>; > + > + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; > + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; > + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; > + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; > + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; > + > + status = "okay"; > +}; > + > +&xo_board_clk { > + clock-frequency = <38400000>; > +}; > + > +/* PINCTRL */ > + > +&pmc8180c_gpios { > + bl_pwm_default_state: bl-pwm-default-state { > + en { This does not look like matching bindings. Did it pass dtbs_check? > + pins = "gpio8"; > + function = "normal"; > + }; > + > + pwm { > + pins = "gpio10"; > + function = "func1"; > + }; > + }; > +}; > + Best regards, Krzysztof
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f1c620bb078e..a9de6f50ca37 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts new file mode 100644 index 000000000000..559a1fb6173f --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts @@ -0,0 +1,590 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include "sc8180x.dtsi" +#include "sc8180x-pmics.dtsi" + +/ { + model = "Lenovo Flex 5G"; + compatible = "lenovo,flex-5g", "qcom,sc8180x"; + + aliases { + serial0 = &uart13; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8180c_lpg 4 1000000>; + enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwm_default_state>; + }; + + chosen { + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&hall_int_active_state>; + + lid { + gpios = <&tlmm 121 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + wakeup-event-action = <EV_ACT_DEASSERTED>; + }; + }; + + reserved-memory { + rmtfs_mem: rmtfs-region@85500000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x85500000 0x0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + wlan_mem: wlan-region@8bc00000 { + reg = <0x0 0x8bc00000 0x0 0x180000>; + no-map; + }; + + mpss_mem: mpss-region@8d800000 { + reg = <0x0 0x8d800000 0x0 0x3000000>; + no-map; + }; + + adsp_mem: adsp-region@90800000 { + reg = <0x0 0x90800000 0x0 0x1c00000>; + no-map; + }; + + gpu_mem: gpu-region@98715000 { + reg = <0x0 0x98715000 0x0 0x2000>; + no-map; + }; + + cdsp_mem: cdsp-region@98900000 { + reg = <0x0 0x98900000 0x0 0x1400000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + vreg_s4a_1p8: pm8150-s4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; +}; + +&apps_rsc { + pmc8180-a-rpmh-regulators { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s5-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>; + + vreg_s5a_2p0: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2100000>; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9a_1p3: ldo9 { + regulator-min-microvolt = <1296000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmc8180c-rpmh-regulators { + compatible = "qcom,pmc8180c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s6-supply = <&vph_pwr>; + vdd-l2-l3-supply = <&vreg_s6c_1p35>; + vdd-bob-supply = <&vph_pwr>; + + vreg_s6c_1p35: smps6 { + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1372000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_1p2: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10c_3p3: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l11c_3p3: ldo11 { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3296000>; + regulator-max-microvolt = <3350000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + pmc8180-e-rpmh-regulators { + compatible = "qcom,pmc8180-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-l2-l10-supply = <&vreg_bob>; + vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>; + vdd-l13-l16-l17-supply = <&vreg_bob>; + + vreg_s4e_0p98: smps4 { + regulator-min-microvolt = <992000>; + regulator-max-microvolt = <992000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s5e_2p05: smps5 { + regulator-min-microvolt = <2040000>; + regulator-max-microvolt = <2040000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1e_0p75: ldo1 { + regulator-min-microvolt = <752000>; + regulator-max-microvolt = <752000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5e_0p88: ldo5 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7e_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10e_2p9: ldo10 { + regulator-min-microvolt = <2904000>; + regulator-max-microvolt = <2904000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l16e_3p0: ldo16 { + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8180x/qcdxkmsuc8180.mbn"; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_active>, <&i2c1_hid_active>; + + status = "okay"; + + hid@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + + interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c7 { + clock-frequency = <100000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_active>, <&i2c7_hid_active>; + + status = "okay"; + + hid@5 { + compatible = "hid-over-i2c"; + reg = <0x5>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>; + }; + + hid@2c { + compatible = "hid-over-i2c"; + reg = <0x2c>; + hid-descr-addr = <0x20>; + + interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_edp { + data-lanes = <0 1 2 3>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_hpd_active>; + + status = "okay"; + + aux-bus { + panel { + compatible = "edp-panel"; + no-hpd; + + backlight = <&backlight>; + + ports { + port { + auo_b140han06_in: endpoint { + remote-endpoint = <&mdss_edp_out>; + }; + }; + }; + }; + }; + + ports { + port@1 { + reg = <1>; + mdss_edp_out: endpoint { + remote-endpoint = <&auo_b140han06_in>; + }; + }; + }; +}; + +&pcie3 { + perst-gpio = <&tlmm 178 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 180 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie3_default_state>; + + status = "okay"; +}; + +&pcie3_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&pmc8180c_lpg { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + memory-region = <&adsp_mem>; + firmware-name = "qcom/sc8180x/qcadsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + memory-region = <&cdsp_mem>; + firmware-name = "qcom/sc8180x/qccdsp8180.mbn"; + + status = "okay"; +}; + +&remoteproc_mpss { + memory-region = <&mpss_mem>; + firmware-name = "qcom/sc8180x/qcmpss8180_nm.mbn"; + + status = "okay"; +}; + +&uart13 { + pinctrl-names = "default"; + pinctrl-0 = <&uart13_state>; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3998-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l9a_1p3>; + vddch0-supply = <&vreg_l11c_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10e_2p9>; + vcc-max-microamp = <155000>; + + vccq2-supply = <&vreg_l7e_1p8>; + vccq2-max-microamp = <425000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l5e_0p88>; + vdda-pll-supply = <&vreg_l3c_1p2>; + + status = "okay"; +}; + +&usb_prim_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_prim_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_prim { + status = "okay"; +}; + +&usb_prim_dwc3 { + dr_mode = "host"; +}; + +&usb_sec_hsphy { + vdda-pll-supply = <&vreg_l5e_0p88>; + vdda18-supply = <&vreg_l12a_1p8>; + vdda33-supply = <&vreg_l16e_3p0>; + + status = "okay"; +}; + +&usb_sec_qmpphy { + vdda-phy-supply = <&vreg_l3c_1p2>; + vdda-pll-supply = <&vreg_l5e_0p88>; + + status = "okay"; +}; + +&usb_sec { + status = "okay"; +}; + +&usb_sec_dwc3 { + dr_mode = "host"; +}; + +&wifi { + memory-region = <&wlan_mem>; + + vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l9a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l11c_3p3>; + vdd-3.3-ch1-supply = <&vreg_l10c_3p3>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&pmc8180c_gpios { + bl_pwm_default_state: bl-pwm-default-state { + en { + pins = "gpio8"; + function = "normal"; + }; + + pwm { + pins = "gpio10"; + function = "func1"; + }; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <47 4>, <126 4>; + + edp_hpd_active: epd-hpd-active-state { + pins = "gpio10"; + function = "edp_hot"; + }; + + hall_int_active_state: hall-int-active-state { + pins = "gpio121"; + function = "gpio"; + + input-enable; + bias-disable; + }; + + i2c1_active: i2c1-active-state { + pins = "gpio114", "gpio115"; + function = "qup1"; + + bias-pull-up = <1>; + drive-strength = <2>; + }; + + i2c1_hid_active: i2c1-hid-active-state { + pins = "gpio122"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_active: i2c7-active-state { + pins = "gpio98", "gpio99"; + function = "qup7"; + + bias-pull-up; + drive-strength = <2>; + }; + + i2c7_hid_active: i2c7-hid-active-state { + pins = "gpio37", "gpio24"; + function = "gpio"; + + input-enable; + bias-pull-up; + drive-strength = <2>; + }; + + pcie3_default_state: pcie3-default-state { + clkreq { + pins = "gpio179"; + function = "pci_e3"; + bias-pull-up; + }; + + reset-n { + pins = "gpio178"; + function = "gpio"; + + drive-strength = <2>; + output-low; + bias-pull-down; + }; + + wake-n { + pins = "gpio180"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart13_state: uart13-state { + cts { + pins = "gpio43"; + function = "qup13"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio44", "gpio45"; + function = "qup13"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio46"; + function = "qup13"; + bias-pull-up; + }; + }; +};