@@ -1228,6 +1228,7 @@ config HID_MCP2221
tristate "Microchip MCP2221 HID USB-to-I2C/SMbus host support"
depends on USB_HID && I2C
depends on GPIOLIB
+ imply IIO
help
Provides I2C and SMBUS host adapter functionality over USB-HID
through MCP2221 device.
@@ -16,6 +16,7 @@
#include <linux/hidraw.h>
#include <linux/i2c.h>
#include <linux/gpio/driver.h>
+#include <linux/iio/iio.h>
#include "hid-ids.h"
/* Commands codes in a raw output report */
@@ -30,6 +31,8 @@ enum {
MCP2221_I2C_CANCEL = 0x10,
MCP2221_GPIO_SET = 0x50,
MCP2221_GPIO_GET = 0x51,
+ MCP2221_SET_SRAM_SETTINGS = 0x60,
+ MCP2221_GET_SRAM_SETTINGS = 0x61,
};
/* Response codes in a raw input report */
@@ -89,6 +92,7 @@ struct mcp2221 {
struct i2c_adapter adapter;
struct mutex lock;
struct completion wait_in_report;
+ struct delayed_work init_work;
u8 *rxbuf;
u8 txbuf[64];
int rxbuf_idx;
@@ -97,6 +101,16 @@ struct mcp2221 {
struct gpio_chip *gc;
u8 gp_idx;
u8 gpio_dir;
+ u8 mode[4];
+#if IS_REACHABLE(CONFIG_IIO)
+ struct iio_chan_spec iio_channels[3];
+ u16 adc_values[3];
+ u8 dac_value;
+#endif
+};
+
+struct mcp2221_iio {
+ struct mcp2221 *mcp;
};
/*
@@ -745,6 +759,9 @@ static int mcp2221_raw_event(struct hid_device *hdev,
break;
}
mcp->status = mcp_get_i2c_eng_state(mcp, data, 8);
+#if IS_REACHABLE(CONFIG_IIO)
+ memcpy(&mcp->adc_values, &data[50], sizeof(mcp->adc_values));
+#endif
break;
default:
mcp->status = -EIO;
@@ -816,6 +833,32 @@ static int mcp2221_raw_event(struct hid_device *hdev,
complete(&mcp->wait_in_report);
break;
+ case MCP2221_SET_SRAM_SETTINGS:
+ switch (data[1]) {
+ case MCP2221_SUCCESS:
+ mcp->status = 0;
+ break;
+ default:
+ mcp->status = -EAGAIN;
+ }
+ complete(&mcp->wait_in_report);
+ break;
+
+ case MCP2221_GET_SRAM_SETTINGS:
+ switch (data[1]) {
+ case MCP2221_SUCCESS:
+ memcpy(&mcp->mode, &data[22], 4);
+#if IS_REACHABLE(CONFIG_IIO)
+ mcp->dac_value = data[6] & GENMASK(4, 0);
+#endif
+ mcp->status = 0;
+ break;
+ default:
+ mcp->status = -EAGAIN;
+ }
+ complete(&mcp->wait_in_report);
+ break;
+
default:
mcp->status = -EIO;
complete(&mcp->wait_in_report);
@@ -824,6 +867,145 @@ static int mcp2221_raw_event(struct hid_device *hdev,
return 1;
}
+#if IS_REACHABLE(CONFIG_IIO)
+static int mcp2221_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long mask)
+{
+ struct mcp2221_iio *priv = iio_priv(indio_dev);
+ struct mcp2221 *mcp = priv->mcp;
+ int ret;
+
+ mutex_lock(&mcp->lock);
+
+ if (channel->output) {
+ *val = mcp->dac_value;
+ ret = IIO_VAL_INT;
+ } else {
+ /* Read ADC values */
+ ret = mcp_chk_last_cmd_status(mcp);
+
+ if (!ret) {
+ *val = le16_to_cpu(mcp->adc_values[channel->address]);
+ if (*val >= BIT(10))
+ ret = -EINVAL;
+ else
+ ret = IIO_VAL_INT;
+ }
+ }
+
+ mutex_unlock(&mcp->lock);
+
+ return ret;
+}
+
+static int mcp2221_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct mcp2221_iio *priv = iio_priv(indio_dev);
+ struct mcp2221 *mcp = priv->mcp;
+ int ret;
+
+ if (val < 0 || val >= BIT(5))
+ return -EINVAL;
+
+ mutex_lock(&mcp->lock);
+
+ memset(mcp->txbuf, 0, 12);
+ mcp->txbuf[0] = MCP2221_SET_SRAM_SETTINGS;
+ mcp->txbuf[4] = BIT(7) | val;
+
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 12);
+
+ if (!ret)
+ mcp->dac_value = val;
+
+ mutex_unlock(&mcp->lock);
+
+ return ret;
+}
+
+static const struct iio_info mcp2221_info = {
+ .read_raw = &mcp2221_read_raw,
+ .write_raw = &mcp2221_write_raw,
+};
+
+static int mcp_iio_channels(struct mcp2221 *mcp)
+{
+ int idx, cnt = 0;
+ bool dac_created = false;
+
+ /* GP0 doesn't have ADC/DAC alternative function */
+ for (idx = 1; idx < MCP_NGPIO; idx++) {
+ struct iio_chan_spec *chan = &mcp->iio_channels[cnt];
+
+ switch (mcp->mode[idx]) {
+ case 2:
+ chan->address = idx - 1;
+ chan->channel = cnt++;
+ break;
+ case 3:
+ /* GP1 doesn't have DAC alternative function */
+ if (idx == 1 || dac_created)
+ continue;
+ /* DAC1 and DAC2 outputs are connected to the same DAC */
+ dac_created = true;
+ chan->output = 1;
+ cnt++;
+ break;
+ default:
+ continue;
+ };
+
+ chan->type = IIO_VOLTAGE;
+ chan->indexed = 1;
+ chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+ chan->scan_index = -1;
+ }
+
+ return cnt;
+}
+
+static void mcp_init_work(struct work_struct *work)
+{
+ struct iio_dev *indio_dev;
+ struct mcp2221 *mcp = container_of(work, struct mcp2221, init_work.work);
+ struct mcp2221_iio *data;
+ int ret, num_channels;
+
+ hid_hw_power(mcp->hdev, PM_HINT_FULLON);
+ mutex_lock(&mcp->lock);
+
+ mcp->txbuf[0] = MCP2221_GET_SRAM_SETTINGS;
+ ret = mcp_send_data_req_status(mcp, mcp->txbuf, 1);
+ mutex_unlock(&mcp->lock);
+ hid_hw_power(mcp->hdev, PM_HINT_NORMAL);
+
+ if (ret)
+ return;
+
+ num_channels = mcp_iio_channels(mcp);
+ if (!num_channels)
+ return;
+
+ indio_dev = devm_iio_device_alloc(&mcp->hdev->dev, sizeof(*data));
+ if (!indio_dev)
+ return;
+
+ data = iio_priv(indio_dev);
+ data->mcp = mcp;
+
+ indio_dev->name = "mcp2221";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &mcp2221_info;
+ indio_dev->channels = mcp->iio_channels;
+ indio_dev->num_channels = num_channels;
+
+ devm_iio_device_register(&mcp->hdev->dev, indio_dev);
+}
+#endif
+
static int mcp2221_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
@@ -902,6 +1084,11 @@ static int mcp2221_probe(struct hid_device *hdev,
if (ret)
goto err_i2c;
+#if IS_REACHABLE(CONFIG_IIO)
+ INIT_DELAYED_WORK(&mcp->init_work, mcp_init_work);
+ schedule_delayed_work(&mcp->init_work, msecs_to_jiffies(500));
+#endif
+
return 0;
err_i2c:
Add support for 3x 10-bit ADC and 1x DAC channels registered via the iio subsystem. To prevent breakage and unexpected dependencies this support only is only built if CONFIG_IIO is enabled, and is only weakly referenced by 'imply IIO' within the respective Kconfig. Additionally the iio device only gets registered if at least one channel is enabled in the power-on configuration read from SRAM. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> --- drivers/hid/Kconfig | 1 + drivers/hid/hid-mcp2221.c | 187 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 188 insertions(+)