| Message ID | 20220908152449.35457-14-farbere@amazon.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Variety of fixes and new features for mr75203 driver | expand |
On Thu, 08 Sep 2022 15:24:41 +0000, Eliav Farber wrote: > Add support for mr76006 pre-scaler which provides divide-by-2 scaling of > the input voltage, so that it can be presented to the VM for measurement > within its range (the VM input range is limited to -0.1V to 1V). > > The new "moortec,vm-pre-scaler-x2" property lists the channels that use > the mr76006 pre-scaler. > > The driver will use this list to multiply the voltage result by 2, to > present to the user with the actual voltage input source. > > Signed-off-by: Eliav Farber <farbere@amazon.com> > --- > V4 -> V3: > - Rename "moortec,vm-pre-scaler" to "moortec,vm-pre-scaler-x2". > - Added mximum number if items in description. > > V3 -> V2: > - Add "moortec" prefix to property name. > - Change property format to be a single u8 array. > - Fix typo: scalar --> scaler. > > .../devicetree/bindings/hwmon/moortec,mr75203.yaml | 13 +++++++++++++ > 1 file changed, 13 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
On Thu, Sep 08, 2022 at 03:24:41PM +0000, Eliav Farber wrote: > Add support for mr76006 pre-scaler which provides divide-by-2 scaling of > the input voltage, so that it can be presented to the VM for measurement > within its range (the VM input range is limited to -0.1V to 1V). > > The new "moortec,vm-pre-scaler-x2" property lists the channels that use > the mr76006 pre-scaler. > > The driver will use this list to multiply the voltage result by 2, to > present to the user with the actual voltage input source. > > Signed-off-by: Eliav Farber <farbere@amazon.com> > Reviewed-by: Rob Herring <robh@kernel.org> Applied to hwmon-next. Thanks, Guenter
diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml index 5d4bf0edea5c..d6b03a6d7043 100644 --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml @@ -79,6 +79,18 @@ properties: Minimum value of each item - 0 (which means entire VM sensor is not used). $ref: /schemas/types.yaml#/definitions/uint8-array + moortec,vm-pre-scaler-x2: + description: + Defines the channels that use a mr76006 pre-scaler to divide the input + source by 2. + The pre-scaler is used for input sources that exceed the VM input range. + The driver uses this information to present to the user with the actual + value of the voltage source. + For channels that are not listed, no pre-scaler is assumed. + Maximum number of items - total number of channels in all VMs. + Each channel should not appear more than once. + $ref: /schemas/types.yaml#/definitions/uint8-array + required: - compatible - reg @@ -101,5 +113,6 @@ examples: clocks = <&osc0>; resets = <&rcu0 0x40 7>; moortec,vm-active-channels = /bits/ 8 <0x10 0x05>; + moortec,vm-pre-scaler-x2 = /bits/ 8 <5 6 20>; #thermal-sensor-cells = <1>; };
Add support for mr76006 pre-scaler which provides divide-by-2 scaling of the input voltage, so that it can be presented to the VM for measurement within its range (the VM input range is limited to -0.1V to 1V). The new "moortec,vm-pre-scaler-x2" property lists the channels that use the mr76006 pre-scaler. The driver will use this list to multiply the voltage result by 2, to present to the user with the actual voltage input source. Signed-off-by: Eliav Farber <farbere@amazon.com> --- V4 -> V3: - Rename "moortec,vm-pre-scaler" to "moortec,vm-pre-scaler-x2". - Added mximum number if items in description. V3 -> V2: - Add "moortec" prefix to property name. - Change property format to be a single u8 array. - Fix typo: scalar --> scaler. .../devicetree/bindings/hwmon/moortec,mr75203.yaml | 13 +++++++++++++ 1 file changed, 13 insertions(+)