| Message ID | 20220927230804.4085579-3-khilman@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dma/ti: enable udma and psil to be built as modules | expand |
Le Tue, Sep 27, 2022 at 04:08:03PM -0700, Kevin Hilman a écrit : > Currently k3-udma driver is built as separate platform drivers with a > shared probe and identical code path, just differnet platform data. > > To enable to build as module, convert the separate platform driver > into a single module_platform_driver with the data selection done via > compatible string and of_match. The separate of_match tables are also > combined into a single table to avoid the multiple calls to > of_match_node() > > Since all modern TI platforms using this are DT enabled, the removal > of separate platform_drivers shoul should nave no functional change. > Hello You have some typo in last sentence. (extra shoul, nave->have) Regards
On 27-09-22, 16:08, Kevin Hilman wrote: > Currently k3-udma driver is built as separate platform drivers with a > shared probe and identical code path, just differnet platform data. > > To enable to build as module, convert the separate platform driver > into a single module_platform_driver with the data selection done via > compatible string and of_match. The separate of_match tables are also > combined into a single table to avoid the multiple calls to > of_match_node() > > Since all modern TI platforms using this are DT enabled, the removal > of separate platform_drivers shoul should nave no functional change. drop extra shoul Please change subsystem tag to dmaengine: ti: xxxx for this and next patch > > Signed-off-by: Kevin Hilman <khilman@baylibre.com> > Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> this has trailing whitespaces, maybe copy paste error > --- > drivers/dma/ti/Kconfig | 4 ++-- > drivers/dma/ti/k3-udma-glue.c | 5 ++++- > drivers/dma/ti/k3-udma.c | 40 +++++------------------------------ > 3 files changed, 11 insertions(+), 38 deletions(-) > > diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig > index 79618fac119a..f196be3b222f 100644 > --- a/drivers/dma/ti/Kconfig > +++ b/drivers/dma/ti/Kconfig > @@ -35,7 +35,7 @@ config DMA_OMAP > DMA engine is found on OMAP and DRA7xx parts. > > config TI_K3_UDMA > - bool "Texas Instruments UDMA support" > + tristate "Texas Instruments UDMA support" > depends on ARCH_K3 > depends on TI_SCI_PROTOCOL > depends on TI_SCI_INTA_IRQCHIP > @@ -48,7 +48,7 @@ config TI_K3_UDMA > DMA engine is used in AM65x and j721e. > > config TI_K3_UDMA_GLUE_LAYER > - bool "Texas Instruments UDMA Glue layer for non DMAengine users" > + tristate "Texas Instruments UDMA Glue layer for non DMAengine users" > depends on ARCH_K3 > depends on TI_K3_UDMA > help > diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c > index 4fdd9f06b723..c29de4695ae7 100644 > --- a/drivers/dma/ti/k3-udma-glue.c > +++ b/drivers/dma/ti/k3-udma-glue.c > @@ -6,6 +6,7 @@ > * > */ > > +#include <linux/module.h> > #include <linux/atomic.h> > #include <linux/delay.h> > #include <linux/dma-mapping.h> > @@ -1433,4 +1434,6 @@ static int __init k3_udma_glue_class_init(void) > { > return class_register(&k3_udma_glue_devclass); > } > -arch_initcall(k3_udma_glue_class_init); > + > +module_init(k3_udma_glue_class_init); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c > index 2f0d2c68c93c..7239ff31c8c5 100644 > --- a/drivers/dma/ti/k3-udma.c > +++ b/drivers/dma/ti/k3-udma.c > @@ -5,6 +5,7 @@ > */ > > #include <linux/kernel.h> > +#include <linux/module.h> > #include <linux/delay.h> > #include <linux/dmaengine.h> > #include <linux/dma-mapping.h> > @@ -4318,18 +4319,10 @@ static const struct of_device_id udma_of_match[] = { > .compatible = "ti,j721e-navss-mcu-udmap", > .data = &j721e_mcu_data, > }, > - { /* Sentinel */ }, > -}; > - > -static const struct of_device_id bcdma_of_match[] = { > { > .compatible = "ti,am64-dmss-bcdma", > .data = &am64_bcdma_data, > }, > - { /* Sentinel */ }, > -}; > - > -static const struct of_device_id pktdma_of_match[] = { > { > .compatible = "ti,am64-dmss-pktdma", > .data = &am64_pktdma_data, > @@ -5254,14 +5247,9 @@ static int udma_probe(struct platform_device *pdev) > return -ENOMEM; > > match = of_match_node(udma_of_match, dev->of_node); > - if (!match) > - match = of_match_node(bcdma_of_match, dev->of_node); > if (!match) { > - match = of_match_node(pktdma_of_match, dev->of_node); > - if (!match) { > - dev_err(dev, "No compatible match found\n"); > - return -ENODEV; > - } > + dev_err(dev, "No compatible match found\n"); > + return -ENODEV; > } > ud->match_data = match->data; > > @@ -5494,27 +5482,9 @@ static struct platform_driver udma_driver = { > }, > .probe = udma_probe, > }; > -builtin_platform_driver(udma_driver); > > -static struct platform_driver bcdma_driver = { > - .driver = { > - .name = "ti-bcdma", > - .of_match_table = bcdma_of_match, > - .suppress_bind_attrs = true, > - }, > - .probe = udma_probe, > -}; > -builtin_platform_driver(bcdma_driver); > - > -static struct platform_driver pktdma_driver = { > - .driver = { > - .name = "ti-pktdma", > - .of_match_table = pktdma_of_match, > - .suppress_bind_attrs = true, > - }, > - .probe = udma_probe, > -}; > -builtin_platform_driver(pktdma_driver); > +module_platform_driver(udma_driver); > +MODULE_LICENSE("GPL v2"); > > /* Private interfaces to UDMA */ > #include "k3-udma-private.c" > -- > 2.34.0
Hi Vinod, Vinod Koul <vkoul@kernel.org> writes: > On 27-09-22, 16:08, Kevin Hilman wrote: >> Currently k3-udma driver is built as separate platform drivers with a >> shared probe and identical code path, just differnet platform data. >> >> To enable to build as module, convert the separate platform driver >> into a single module_platform_driver with the data selection done via >> compatible string and of_match. The separate of_match tables are also >> combined into a single table to avoid the multiple calls to >> of_match_node() >> >> Since all modern TI platforms using this are DT enabled, the removal >> of separate platform_drivers shoul should nave no functional change. > > drop extra shoul > > Please change subsystem tag to dmaengine: ti: xxxx for this and next > patch OK. >> >> Signed-off-by: Kevin Hilman <khilman@baylibre.com> >> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> > > this has trailing whitespaces, maybe copy paste error Yup. Thanks for the review. Will respin. Kevin
diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig index 79618fac119a..f196be3b222f 100644 --- a/drivers/dma/ti/Kconfig +++ b/drivers/dma/ti/Kconfig @@ -35,7 +35,7 @@ config DMA_OMAP DMA engine is found on OMAP and DRA7xx parts. config TI_K3_UDMA - bool "Texas Instruments UDMA support" + tristate "Texas Instruments UDMA support" depends on ARCH_K3 depends on TI_SCI_PROTOCOL depends on TI_SCI_INTA_IRQCHIP @@ -48,7 +48,7 @@ config TI_K3_UDMA DMA engine is used in AM65x and j721e. config TI_K3_UDMA_GLUE_LAYER - bool "Texas Instruments UDMA Glue layer for non DMAengine users" + tristate "Texas Instruments UDMA Glue layer for non DMAengine users" depends on ARCH_K3 depends on TI_K3_UDMA help diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c index 4fdd9f06b723..c29de4695ae7 100644 --- a/drivers/dma/ti/k3-udma-glue.c +++ b/drivers/dma/ti/k3-udma-glue.c @@ -6,6 +6,7 @@ * */ +#include <linux/module.h> #include <linux/atomic.h> #include <linux/delay.h> #include <linux/dma-mapping.h> @@ -1433,4 +1434,6 @@ static int __init k3_udma_glue_class_init(void) { return class_register(&k3_udma_glue_devclass); } -arch_initcall(k3_udma_glue_class_init); + +module_init(k3_udma_glue_class_init); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 2f0d2c68c93c..7239ff31c8c5 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -5,6 +5,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/delay.h> #include <linux/dmaengine.h> #include <linux/dma-mapping.h> @@ -4318,18 +4319,10 @@ static const struct of_device_id udma_of_match[] = { .compatible = "ti,j721e-navss-mcu-udmap", .data = &j721e_mcu_data, }, - { /* Sentinel */ }, -}; - -static const struct of_device_id bcdma_of_match[] = { { .compatible = "ti,am64-dmss-bcdma", .data = &am64_bcdma_data, }, - { /* Sentinel */ }, -}; - -static const struct of_device_id pktdma_of_match[] = { { .compatible = "ti,am64-dmss-pktdma", .data = &am64_pktdma_data, @@ -5254,14 +5247,9 @@ static int udma_probe(struct platform_device *pdev) return -ENOMEM; match = of_match_node(udma_of_match, dev->of_node); - if (!match) - match = of_match_node(bcdma_of_match, dev->of_node); if (!match) { - match = of_match_node(pktdma_of_match, dev->of_node); - if (!match) { - dev_err(dev, "No compatible match found\n"); - return -ENODEV; - } + dev_err(dev, "No compatible match found\n"); + return -ENODEV; } ud->match_data = match->data; @@ -5494,27 +5482,9 @@ static struct platform_driver udma_driver = { }, .probe = udma_probe, }; -builtin_platform_driver(udma_driver); -static struct platform_driver bcdma_driver = { - .driver = { - .name = "ti-bcdma", - .of_match_table = bcdma_of_match, - .suppress_bind_attrs = true, - }, - .probe = udma_probe, -}; -builtin_platform_driver(bcdma_driver); - -static struct platform_driver pktdma_driver = { - .driver = { - .name = "ti-pktdma", - .of_match_table = pktdma_of_match, - .suppress_bind_attrs = true, - }, - .probe = udma_probe, -}; -builtin_platform_driver(pktdma_driver); +module_platform_driver(udma_driver); +MODULE_LICENSE("GPL v2"); /* Private interfaces to UDMA */ #include "k3-udma-private.c"