| Message ID | 20220927220504.3744878-1-dmitry.torokhov@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] ARM: dts: exynos: fix polarity of VBUS GPIO | expand |
On Tue, 27 Sep 2022 15:05:03 -0700, Dmitry Torokhov wrote: > EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when > trying to power up the bus, therefore the GPIO in DTS must be marked as > "active high". This will be important when EHCI driver is converted to > gpiod API that respects declared polarities. > > Applied, thanks! [1/2] ARM: dts: exynos: fix polarity of VBUS GPIO https://git.kernel.org/krzk/linux/c/a08137bd1e0a7ce951dce9ce4a83e39d379b6e1b Best regards,
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 6db09dba07ff..a3905e27b9cd 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -95,7 +95,7 @@ &exynos_usbphy { }; &ehci { - samsung,vbus-gpio = <&gpx3 5 1>; + samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>; status = "okay"; phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>; phy-names = "hsic0", "hsic1";
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when trying to power up the bus, therefore the GPIO in DTS must be marked as "active high". This will be important when EHCI driver is converted to gpiod API that respects declared polarities. Fixes: 4e8991def565 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- arch/arm/boot/dts/exynos4412-origen.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)